SCTE-HMS-HE-OPTICAL-RECEIVER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
9

heOpRxInputTable

table
.1.3.6.1.4.1.5591.1.11.1.2.1.1.1 · 1 row entry · 4 columns
Open in standard view 
A table containing information about the input (optical) section 
in optical receivers in a subsystem.
heOpRxInputEntry entry .1.3.6.1.4.1.5591.1.11.1.2.1.1.1.1
A list of information about each optical section in an
optical receiver.
Indexes
ENTITY-MIBentPhysicalIndex heOpRxInputIndex
Column Syntax OID
heOpRxInputIndex
An arbitrary value which uniquely identifies
the receiver input.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5591.1.11.1.2.1.1.1.1.1
heOpRxInputPower
Receiver input power.

This object must provide for the alarm management capabilities
with a corresponding entry in the propertyTable of
SCTE-HMS-PROPERTY-MIB (HMS026).

An alarm shall be rec…
0.1 dBmSCTE-HMS-HEADENDIDENT-MIBHeTenthdBm
Textual Convention: SCTE-HMS-HEADENDIDENT-MIBHeTenthdBm Integer32
 .1.3.6.1.4.1.5591.1.11.1.2.1.1.1.1.2
heOpRxInputWavelengthControl
Wavelength feeding the particular input of the receiver.
Typical values might be 131000 (1310 nm) and 155000 (1550 nm).

This object is used to calibrate the optical power reading
and has no affect on the …
0.01 nmSCTE-HMS-HEADENDIDENT-MIBHeHundredthNanoMeterr/w
Textual Convention: SCTE-HMS-HEADENDIDENT-MIBHeHundredthNanoMeter Unsigned32
 .1.3.6.1.4.1.5591.1.11.1.2.1.1.1.1.3
heOpRxInputStatus
The laser detector status.

The value is normal(1) if the optical input is at normal levels.

The value is fault(2) if the optical level is not at
the normal level.

This obje…
SCTE-HMS-HEADENDIDENT-MIBHeFaultStatus
Textual Convention: SCTE-HMS-HEADENDIDENT-MIBHeFaultStatus Enumeration
Type Values:
1normal
2fault
 .1.3.6.1.4.1.5591.1.11.1.2.1.1.1.1.4

heOpRxOutputTable

table
.1.3.6.1.4.1.5591.1.11.1.2.1.1.2 · 1 row entry · 5 columns
Open in standard view 
A table containing information about the output (RF) section 
in optical receivers in a subsystem.
heOpRxOutputEntry entry .1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1
A list of information about each RF section in an
optical receiver.
Indexes
ENTITY-MIBentPhysicalIndex heOpRxOutputIndex
Column Syntax OID
heOpRxOutputIndex
An arbitrary value which uniquely identifies
the receiver output.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1.1
heOpRxOutputControl
Switches a particular receiver output either off(1) or on(2).

A GET request shall return the current control state that is
either off(1) or on(2).
SCTE-HMS-HEADENDIDENT-MIBHeOnOffControlr/w
Textual Convention: SCTE-HMS-HEADENDIDENT-MIBHeOnOffControl Enumeration
Type Values:
1off
2on
3meaningless
 .1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1.2
heOpRxOutputGainType
Controls the output gain type, which is either constant
power or constant gain.
Enumerationr/w
Enumerated Values:
1constantPower
2constantGain
 .1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1.3
heOpRxOutputPower
RF output power.
0.1 dBmSCTE-HMS-HEADENDIDENT-MIBHeTenthdBm
Textual Convention: SCTE-HMS-HEADENDIDENT-MIBHeTenthdBm Integer32
 .1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1.4
heOpRxOutputRFPadLevel
RF Pad Attenuation Level.
0.1 dBSCTE-HMS-HEADENDIDENT-MIBHeTenthdBr/w
Textual Convention: SCTE-HMS-HEADENDIDENT-MIBHeTenthdB Integer32
 .1.3.6.1.4.1.5591.1.11.1.2.1.1.2.1.5