SCTE-HMS-GEN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
29

genDeviceTable

table mandatory
.1.3.6.1.4.1.5591.1.6.2 · 1 row entry · 29 columns
Uses the scte variant from /opt/observium/mibs/scte.
Command help
Walk genDeviceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCTE-HMS-GEN-MIB' -M '/opt/observium/mibs/scte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCTE-HMS-GEN-MIB::genDeviceTable'
Table containing information about the individual 
generators being monitored
genDeviceEntry row .1.3.6.1.4.1.5591.1.6.2.1
List of information about each generator being monitored.
Column Syntax OID
Index into the psDeviceTable.
Address of Generator on the RS-485 Path
Integer32
Constraints:
range: 1-15
.1.3.6.1.4.1.5591.1.6.2.1.1
Version of the SCTE HMS protocol implemented in the monitored
equipment. The 'Protocol Version' implementation will comply
with the defined protocol in the SCTE 25-3 (formerly HMS 022)
document with the corresponding …
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.5591.1.6.2.1.2
The contents of this field are vendor specific. The intent
is to provide a text representation of the power supply or
generator system software version. Any printable ASCII
characters ca be included in this field. NULL…
OctetString
Constraints:
range: 8-8
.1.3.6.1.4.1.5591.1.6.2.1.3
genDeviceIdmandatory
The content of this field is vendor specific. The intent is
to provide manufacturer and/or product specific ASCII text
information that will propagate to the manager's console
verbatim. The following special characters…
OctetString
Constraints:
range: 32-32
.1.3.6.1.4.1.5591.1.6.2.1.4
Defines if gas hazard sensor is installed.
Enumeration
Enumerated Values:
1notInstalled
2installed
.1.3.6.1.4.1.5591.1.6.2.1.5
Defines if water intrusion sensor is installed.
Enumeration
Enumerated Values:
1notInstalled
2installed
.1.3.6.1.4.1.5591.1.6.2.1.6
Defines if pad shear sensor is installed.
Enumeration
Enumerated Values:
1notInstalled
2installed
.1.3.6.1.4.1.5591.1.6.2.1.7
genDoorOptionmandatory
Defines if separate generator door is installed.
Enumeration
Enumerated Values:
1notInstalled
2installed
.1.3.6.1.4.1.5591.1.6.2.1.8
Defines if charger fail signal is supported.
Enumeration
Enumerated Values:
1notInstalled
2installed
.1.3.6.1.4.1.5591.1.6.2.1.9
genFuelOptionmandatory
Defines if low fuel detection is supported.
Enumeration
Enumerated Values:
1notInstalled
2installed
.1.3.6.1.4.1.5591.1.6.2.1.10
Defines if engine ignition battery voltage is monitored.
Enumeration
Enumerated Values:
1notInstalled
2installed
.1.3.6.1.4.1.5591.1.6.2.1.11
genTempOptionmandatory
Defines if engine enclosure temperature is monitored.
Enumeration
Enumerated Values:
1notInstalled
2installed
.1.3.6.1.4.1.5591.1.6.2.1.12
Defines the current state of generator operation.
1 = Off
2 = Running(test)
3 = Running
4 = Fail (A condition preventing the generator
from functioning)

This item requires entries in the discr…
Enumeration
Enumerated Values:
1off
2runningTest
3running
4fail
.1.3.6.1.4.1.5591.1.6.2.1.13
genGasHazardmandatory
The concentration of hydrocarbon fuel in the
generator enclosure has exceeded safe limits.
Generator operation is suspended. The alarm
is cleared when the sensor is reset via the
'Reset Latched Generator Alarms' com…
Enumeration
Enumerated Values:
1noAlarm
2alarm
.1.3.6.1.4.1.5591.1.6.2.1.14
Water level within the generator or fuel enclosure
has exceeded safe limits for generator operation.
Generator operation is suspended while this alarm
is active. The alarm is reset when the water returns
to a safe leve…
Enumeration
Enumerated Values:
1noAlarm
2alarm
.1.3.6.1.4.1.5591.1.6.2.1.15
genPadShearmandatory
Indicates that the generator or fuel enclosure
has shifted from its mounting position. Generator
operation is suspended. The alarm is reset when
the unit its returned to its original position.

This item …
Enumeration
Enumerated Values:
1noAlarm
2alarm
.1.3.6.1.4.1.5591.1.6.2.1.16
Indicates current status of the generator
and/or auxiliary fuel enclosure door.

This item requires entries in the discrete property table.
Enumeration
Enumerated Values:
1noAlarm
2alarm
.1.3.6.1.4.1.5591.1.6.2.1.17
genChargermandatory
Indicates if the ignition battery charger is operating.

This item requires entries in the discrete property table.
Enumeration
Enumerated Values:
1noAlarm
2alarm
.1.3.6.1.4.1.5591.1.6.2.1.18
genFuelmandatory
Indicates if the engine's fuel supply is sufficient
for extended operation. Alarm is reset when fuel is
replenished.

This item requires entries in the discrete property table.
Enumeration
Enumerated Values:
1noAlarm
2alarm
.1.3.6.1.4.1.5591.1.6.2.1.19
Scaled representation of the generator's
ignition battery in 1/100 Volts.

This item requires an entry in the property table.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.5591.1.6.2.1.20
Temperature inside generator's enclosure in degrees C.

This item requires an entry in the property table.
Integer32
Constraints:
range: -40-80
.1.3.6.1.4.1.5591.1.6.2.1.21
When written, the appropriate corresponding command action
is sent to the generator.

1 = End generator test
2 = Start generator test
3 = Reset latched generator alarms which
may be preventing a generator…
Enumerationr/w
Enumerated Values:
1stopGenerator
2startGenerator
3resetLatchedAlarms
.1.3.6.1.4.1.5591.1.6.2.1.22
genOilOptionmandatory
Defines if oil pressure is monitored.
Enumeration
Enumerated Values:
1notInstalled
2installed
.1.3.6.1.4.1.5591.1.6.2.1.23
Defines if the minor alarm indicator is supported.
Enumeration
Enumerated Values:
1notInstalled
2installed
.1.3.6.1.4.1.5591.1.6.2.1.24
Defines if the major alarm indicator is supported.
Enumeration
Enumerated Values:
1notInstalled
2installed
.1.3.6.1.4.1.5591.1.6.2.1.25
genOiloptional
Indicates if the engine's oil is adequate for safe operation.
Alarm is reset when the condition returns to normal.

This item requires entries in the discrete property table.
Enumeration
Enumerated Values:
1noAlarm
2alarm
.1.3.6.1.4.1.5591.1.6.2.1.26
Indicates if the generator is indicating a minor alarm.
The generator requires attention, but does not require an immediate
visit to the generator.

This item requires entries in the discrete property tabl…
Enumeration
Enumerated Values:
1noAlarm
2alarm
.1.3.6.1.4.1.5591.1.6.2.1.27
Indicates if the generator is indicating a major alarm.
The generator requires immediate attention, and should be visited
immediately to remedy the situation.

This item requires entries in the discrete pr…
Enumeration
Enumerated Values:
1noAlarm
2alarm
.1.3.6.1.4.1.5591.1.6.2.1.28
genVendorOIDoptional
This object provides a means for a vendor to
point to a vendor specific extension of this MIB.
ObjectIdentifier .1.3.6.1.4.1.5591.1.6.2.1.29