SCSI-MIB
The SCSI MIB Module.
Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC 4455; see the RFC
itself for full legal notices.
- Source file
SCSI-MIB- Last revised
- Identity
scsiMIB- Base OID
1.3.6.1.2.1.139
Imported Objects
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | AutonomousType RowPointer RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'SCSI-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SCSI-MIB::scsiMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCSI-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCSI-MIB::scsiMIB'
Objects (156)
Showing 156 of 156 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.139 |
||
.1.3.6.1.2.1.139.0 |
||
.1.3.6.1.2.1.139.0.0 |
||
.1.3.6.1.2.1.139.1 |
||
.1.3.6.1.2.1.139.1.1 |
||
.1.3.6.1.2.1.139.1.1.1 |
||
.1.3.6.1.2.1.139.1.1.2 |
||
.1.3.6.1.2.1.139.1.1.3 |
||
.1.3.6.1.2.1.139.1.1.4 |
||
.1.3.6.1.2.1.139.1.1.5 |
||
.1.3.6.1.2.1.139.1.1.6 |
||
.1.3.6.1.2.1.139.1.1.7 |
||
.1.3.6.1.2.1.139.2 |
||
.1.3.6.1.2.1.139.2.1 |
||
.1.3.6.1.2.1.139.2.1.1 |
||
.1.3.6.1.2.1.139.2.1.1.1 |
||
.1.3.6.1.2.1.139.2.1.1.1.1 |
||
|
|
OctetString
|
.1.3.6.1.2.1.139.2.1.1.1.2 |
.1.3.6.1.2.1.139.2.1.1.1.3 |
||
.1.3.6.1.2.1.139.2.1.1.1.4 |
||
.1.3.6.1.2.1.139.2.1.1.1.5 |
||
.1.3.6.1.2.1.139.2.1.1.1.6 |
||
.1.3.6.1.2.1.139.2.1.2 |
||
.1.3.6.1.2.1.139.2.1.2.1 |
||
.1.3.6.1.2.1.139.2.1.2.1.1 |
||
|
|
OctetString
|
.1.3.6.1.2.1.139.2.1.2.1.2 |
|
Bits
|
.1.3.6.1.2.1.139.2.1.2.1.3 |
|
.1.3.6.1.2.1.139.2.1.2.1.4 |
||
.1.3.6.1.2.1.139.2.1.3 |
||
.1.3.6.1.2.1.139.2.1.3.1 |
||
.1.3.6.1.2.1.139.2.1.3.1.1 |
||
|
Bits
|
.1.3.6.1.2.1.139.2.1.3.1.2 |
|
.1.3.6.1.2.1.139.2.1.3.1.3 |
||
.1.3.6.1.2.1.139.2.1.3.1.4 |
||
.1.3.6.1.2.1.139.2.1.5 |
||
.1.3.6.1.2.1.139.2.1.5.1 |
||
.1.3.6.1.2.1.139.2.1.5.1.1 |
||
.1.3.6.1.2.1.139.2.1.5.1.2 |
||
.1.3.6.1.2.1.139.2.1.5.1.3 |
||
.1.3.6.1.2.1.139.2.1.5.1.4 |
||
.1.3.6.1.2.1.139.2.2 |
||
.1.3.6.1.2.1.139.2.2.1 |
||
.1.3.6.1.2.1.139.2.2.1.1 |
||
|
Enumeration
|
.1.3.6.1.2.1.139.2.2.1.1.1 |
|
.1.3.6.1.2.1.139.2.2.1.1.2 |
||
.1.3.6.1.2.1.139.2.2.2 |
||
.1.3.6.1.2.1.139.2.2.2.1 |
||
.1.3.6.1.2.1.139.2.2.2.1.1 |
||
.1.3.6.1.2.1.139.2.2.2.1.2 |
||
|
commandsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.2.2.1.3 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.2.2.1.4 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.2.2.1.5 |
|
|
commandsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.139.2.2.2.1.6 |
|
.1.3.6.1.2.1.139.2.2.3 |
||
.1.3.6.1.2.1.139.2.2.3.1 |
||
.1.3.6.1.2.1.139.2.2.3.1.1 |
||
.1.3.6.1.2.1.139.2.2.3.1.1.1 |
||
|
commandsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.139.2.2.3.1.1.10 |
|
.1.3.6.1.2.1.139.2.2.3.1.1.11 |
||
.1.3.6.1.2.1.139.2.2.3.1.1.12 |
||
.1.3.6.1.2.1.139.2.2.3.1.1.2 |
||
.1.3.6.1.2.1.139.2.2.3.1.1.3 |
||
|
|
.1.3.6.1.2.1.139.2.2.3.1.1.4 |
|
.1.3.6.1.2.1.139.2.2.3.1.1.5 |
||
.1.3.6.1.2.1.139.2.2.3.1.1.6 |
||
|
commandsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.2.3.1.1.7 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.2.3.1.1.8 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.2.3.1.1.9 |
|
.1.3.6.1.2.1.139.2.2.3.2 |
||
.1.3.6.1.2.1.139.2.2.3.2.1 |
||
.1.3.6.1.2.1.139.2.2.3.2.1.1 |
||
.1.3.6.1.2.1.139.2.2.3.2.1.2 |
||
.1.3.6.1.2.1.139.2.2.3.3 |
||
.1.3.6.1.2.1.139.2.2.3.3.1 |
||
.1.3.6.1.2.1.139.2.2.3.3.1.1 |
||
.1.3.6.1.2.1.139.2.2.3.3.1.2 |
||
.1.3.6.1.2.1.139.2.2.3.3.1.3 |
||
.1.3.6.1.2.1.139.2.2.3.3.1.4 |
||
.1.3.6.1.2.1.139.2.2.3.3.1.5 |
||
.1.3.6.1.2.1.139.2.2.3.4 |
||
.1.3.6.1.2.1.139.2.2.3.4.1 |
||
.1.3.6.1.2.1.139.2.2.3.4.1.1 |
||
.1.3.6.1.2.1.139.2.2.3.4.1.2 |
||
.1.3.6.1.2.1.139.2.2.3.4.1.3 |
||
.1.3.6.1.2.1.139.2.2.3.4.1.4 |
||
.1.3.6.1.2.1.139.2.3 |
||
.1.3.6.1.2.1.139.2.3.1 |
||
.1.3.6.1.2.1.139.2.3.1.1 |
||
.1.3.6.1.2.1.139.2.3.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.2.1.139.2.3.1.1.2 |
|
.1.3.6.1.2.1.139.2.3.1.1.3 |
||
.1.3.6.1.2.1.139.2.3.1.1.4 |
||
.1.3.6.1.2.1.139.2.3.2 |
||
.1.3.6.1.2.1.139.2.3.2.1 |
||
.1.3.6.1.2.1.139.2.3.2.1.1 |
||
.1.3.6.1.2.1.139.2.3.2.1.2 |
||
|
commandsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.3.2.1.3 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.3.2.1.4 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.3.2.1.5 |
|
|
commandsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.139.2.3.2.1.6 |
|
.1.3.6.1.2.1.139.2.3.3 |
||
.1.3.6.1.2.1.139.2.3.3.1 |
||
.1.3.6.1.2.1.139.2.3.3.1.1 |
||
.1.3.6.1.2.1.139.2.3.3.1.1.1 |
||
|
commandsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.139.2.3.3.1.1.10 |
|
.1.3.6.1.2.1.139.2.3.3.1.1.11 |
||
.1.3.6.1.2.1.139.2.3.3.1.1.12 |
||
.1.3.6.1.2.1.139.2.3.3.1.1.2 |
||
.1.3.6.1.2.1.139.2.3.3.1.1.3 |
||
|
|
.1.3.6.1.2.1.139.2.3.3.1.1.4 |
|
.1.3.6.1.2.1.139.2.3.3.1.1.5 |
||
|
TimesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.3.3.1.1.6 |
|
|
commandsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.3.3.1.1.7 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.3.3.1.1.8 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.3.3.1.1.9 |
|
.1.3.6.1.2.1.139.2.3.3.2 |
||
.1.3.6.1.2.1.139.2.3.3.2.1 |
||
.1.3.6.1.2.1.139.2.3.3.2.1.1 |
||
.1.3.6.1.2.1.139.2.3.3.2.1.2 |
||
.1.3.6.1.2.1.139.2.3.3.2.1.3 |
||
.1.3.6.1.2.1.139.2.3.3.2.1.4 |
||
.1.3.6.1.2.1.139.2.4 |
||
.1.3.6.1.2.1.139.2.4.1 |
||
.1.3.6.1.2.1.139.2.4.1.1 |
||
.1.3.6.1.2.1.139.2.4.1.1.1 |
||
|
commandsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.4.1.1.10 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.4.1.1.11 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.4.1.1.12 |
|
|
resetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.139.2.4.1.1.13 |
|
.1.3.6.1.2.1.139.2.4.1.1.14 |
||
|
commandsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.139.2.4.1.1.15 |
|
.1.3.6.1.2.1.139.2.4.1.1.16 |
||
.1.3.6.1.2.1.139.2.4.1.1.2 |
||
.1.3.6.1.2.1.139.2.4.1.1.3 |
||
.1.3.6.1.2.1.139.2.4.1.1.4 |
||
.1.3.6.1.2.1.139.2.4.1.1.5 |
||
.1.3.6.1.2.1.139.2.4.1.1.6 |
||
.1.3.6.1.2.1.139.2.4.1.1.7 |
||
|
Enumeration
|
.1.3.6.1.2.1.139.2.4.1.1.8 |
|
|
Bits
|
.1.3.6.1.2.1.139.2.4.1.1.9 |
|
.1.3.6.1.2.1.139.2.4.2 |
||
.1.3.6.1.2.1.139.2.4.2.1 |
||
.1.3.6.1.2.1.139.2.4.2.1.1 |
||
.1.3.6.1.2.1.139.2.4.2.1.2 |
||
.1.3.6.1.2.1.139.2.4.2.1.3 |
||
.1.3.6.1.2.1.139.2.4.2.1.4 |
||
.1.3.6.1.2.1.139.2.4.2.1.5 |
||
.1.3.6.1.2.1.139.2.4.3 |
||
.1.3.6.1.2.1.139.2.4.3.1 |
||
.1.3.6.1.2.1.139.2.4.3.1.1 |
||
.1.3.6.1.2.1.139.2.4.3.1.2 |
||
.1.3.6.1.2.1.139.2.4.3.1.3 |
||
.1.3.6.1.2.1.139.2.4.3.1.4 |
||
.1.3.6.1.2.1.139.3 |
||
.1.3.6.1.2.1.139.3.1 |
||
.1.3.6.1.2.1.139.3.2 |
Dependencies (4) 4 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- SNMP-FRAMEWORK-MIBrfc
- SCSI-MIBrfcselected
Type Definitions (13)
| Enumeration |
device(1)port(2)other(3) |
|
| Integer32 |
range: 0..2147483647 |
|
| Unsigned32 |
range: 0..3 |
|
| Unsigned32 |
range: 0..15 |
|
| Unsigned32 |
range: 0..15 |
|
| OctetString |
range: 0..255 |
|
| OctetString |
range: 0..262 |
|
| Unsigned32 |
range: 1..4294967295 |
|
| Unsigned32 |
range: 0..4294967295 |
|
| OctetString |
range: 2range: 8 |
|
| OctetString |
range: 0range: 8 |
|
| OctetString |
range: 0..262 |
|
| Unsigned32 |
range: 0..4294967295 |
Conformance Groups (15)
|
scsiInstAlias scsiInstSoftwareIndex scsiInstVendorVersion scsiInstScsiNotificationsEnable scsiInstStorageType scsiDeviceAlias scsiDeviceRole scsiDevicePortNumber scsiPortRole scsiPortTransportPtr scsiTransportType scsiTransportPointer scsiTransportDevName
A collection of objects providing information about SCSI
instances, devices, and ports. |
.1.3.6.1.2.1.139.3.2.1
|
|
|
scsiIntrDevTgtAccessMode scsiIntrPortName scsiIntrPortIdentifier scsiAttTgtPortDscTgtIdx scsiAttTgtPortName scsiAttTgtPortIdentifier
This group is relevant for s SCSI initiator device and port.
|
.1.3.6.1.2.1.139.3.2.2
|
|
|
scsiDscTgtDevOrPort scsiDscTgtName scsiDscTgtConfigured scsiDscTgtDiscovered scsiDscTgtRowStatus scsiDscTgtLastCreation scsiDscLunLun scsiDscLunIdCodeSet scsiDscLunIdAssociation scsiDscLunIdType scsiDscLunIdValue
This group is relevant for the discovered SCSI target devices
by a SCSI initiator port. |
.1.3.6.1.2.1.139.3.2.3
|
|
|
scsiTgtDevNumberOfLUs scsiTgtDeviceStatus scsiTgtDevNonAccessibleLUs scsiTgtPortName scsiTgtPortIdentifier scsiAttIntrPortAuthIntrIdx scsiAttIntrPortName scsiAttIntrPortIdentifier scsiLuDefaultLun scsiLuWwnName scsiLuVendorId scsiLuProductId scsiLuRevisionId scsiLuPeripheralType scsiLuStatus scsiLuState scsiLuLastCreation scsiLuIdCodeSet scsiLuIdAssociation scsiLuIdType scsiLuIdValue
This group is relevant for a SCSI target device and port.
|
.1.3.6.1.2.1.139.3.2.4
|
|
|
scsiLunMapLuIndex scsiLunMapRowStatus scsiAuthIntrDevOrPort scsiAuthIntrName scsiAuthIntrLunMapIndex scsiAuthIntrLastCreation scsiAuthIntrRowStatus
This group is a collection of attributes regarding the mapping
between Logical Unit Number, logical unit, and target device. |
.1.3.6.1.2.1.139.3.2.5
|
|
|
scsiTgtDevResets scsiTgtPortInCommands scsiTgtPortWrittenMegaBytes scsiTgtPortReadMegaBytes scsiLuInCommands scsiLuReadMegaBytes scsiLuWrittenMegaBytes scsiLuInResets scsiLuOutTaskSetFullStatus
This group is a collection of statistics for all
implementations of the SCSI MIB module that contain SCSI target devices. |
.1.3.6.1.2.1.139.3.2.6
|
|
|
This group is a collection of high speed statistics for all
implementations of the SCSI MIB module that contain SCSI target devices. |
.1.3.6.1.2.1.139.3.2.7
|
|
|
scsiAuthIntrAttachedTimes scsiAuthIntrOutCommands scsiAuthIntrReadMegaBytes scsiAuthIntrWrittenMegaBytes
This group is a collection of statistics regarding SCSI
initiator devices authorized to attach local logical unit and SCSI target device. |
.1.3.6.1.2.1.139.3.2.8
|
|
|
This group is a collection of high speed statistics regarding
SCSI initiator devices authorized to attach local logical unit and SCSI target device. |
.1.3.6.1.2.1.139.3.2.9
|
|
|
This group is a collection of statistics for all
implementations of the SCSI MIB module that contain SCSI initiator devices. |
.1.3.6.1.2.1.139.3.2.10
|
|
|
This group is a collection of high speed statistics for all
implementations of the SCSI MIB module that contain SCSI initiator devices. |
.1.3.6.1.2.1.139.3.2.11
|
|
|
This group is a collection of statistics for all
implementations of the SCSI MIB module that contain discovered SCSI initiator devices. |
.1.3.6.1.2.1.139.3.2.12
|
|
|
This group is a collection of high speed statistics for all
implementations of the SCSI MIB module that contain discovered SCSI initiator devices. |
.1.3.6.1.2.1.139.3.2.13
|
|
|
A collection of statistics regarding SCSI devices and
ports. |
.1.3.6.1.2.1.139.3.2.14
|
|
|
A collection of notifications regarding status change of SCSI
target devices and logical units. |
.1.3.6.1.2.1.139.3.2.15
|
Compliance Statements (1)
OID
.1.3.6.1.2.1.139.3.1.1Describes the requirements for compliance to this SCSI MIB
module.
If an implementation can be both a SCSI target device and a SCSI
initiator device, all groups are mandatory.
module.
If an implementation can be both a SCSI target device and a SCSI
initiator device, all groups are mandatory.
Required groups
| mandatory | scsiDeviceGroup | |
| optional | scsiTargetDeviceGroup |
This group is mandatory for all SCSI implementations that have SCSI target devices. |
| optional | scsiLunMapGroup |
This group is mandatory for systems having the capabilities of mapping local SCSI target devices and logical units according to remote SCSI initiator devices. |
| optional | scsiTgtDevLuNotificationsGroup |
This group is mandatory for all SCSI implementations that have SCSI target devices and are able to report status changes. |
| optional | scsiInitiatorDeviceGroup |
This group is mandatory for all SCSI implementations that have SCSI initiator devices. |
| optional | scsiDiscoveryGroup |
This group is mandatory for systems having the capabilities of discovering remote SCSI target devices via local SCSI initiator devices. |
| optional | scsiDeviceStatGroup |
This group is mandatory for all SCSI implementations that can gather statistics. |
| optional | scsiInitiatorDevStatsGroup |
This group is mandatory for all SCSI implementations that can gather statistics at SCSI initiator device side. |
| optional | scsiDiscoveryStatsGroup |
This group is mandatory for system having the capabilities of gathering statistics regarding remote SCSI target devices via local SCSI initiator devices. |
| optional | scsiTargetDevStatsGroup |
This group is mandatory for all SCSI implementations that can gather statistics at SCSI target devices. |
| optional | scsiLunMapStatsGroup |
This group is mandatory for SCSI implementations able to map local SCSI target devices and logical units according to remote SCSI initiator devices. |
| optional | scsiInitiatorDevHSStatsGroup |
This group is mandatory for all SCSI implementations that can gather statistics at the SCSI initiator device side and are running at high speed, meaning speed of 4 Gbit/second or higher. |
| optional | scsiDiscoveryHSStatsGroup |
This group is mandatory for systems having the capabilities of gathering statistics regarding remote SCSI target devices via local SCSI initiator devices and are running at high speed, meaning speed of 4 Gbit/second or higher. |
| optional | scsiTargetDevHSStatsGroup |
This group is mandatory for all SCSI implementations that can gather statistics at SCSI target devices in high speed systems, meaning speed of 4 Gbit/second or higher. |
| optional | scsiLunMapHSStatsGroup |
This group is mandatory for SCSI implementations able to map local SCSI target devices and logical units according to remote SCSI initiator devices in a high speed system, meaning speed of 4 Gbit/second or higher. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| scsiInstAlias | readonly | Write access is not mandatory. | |
| scsiInstScsiNotificationsEnable | readonly | Write access is not mandatory. | |
| scsiDeviceAlias | readonly | Write access is not mandatory. | |
| scsiInstStorageType | readonly | Write access is not required. | |
| scsiAuthIntrDevOrPort | readonly | Write access is not required. | |
| scsiAuthIntrName | readonly | Write access is not required. | |
| scsiAuthIntrLunMapIndex | readonly | Write access is not required. | |
| scsiAuthIntrRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| scsiIntrDevTgtAccessMode | readonly | Write access is not mandatory. | |
| scsiLunMapLuIndex | readonly | Write access is not mandatory. | |
| scsiLunMapRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| scsiDscTgtDevOrPort | readonly | Write access is not mandatory. | |
| scsiDscTgtName | readonly | Write access is not mandatory. | |
| scsiDscTgtConfigured | readonly |
false(2)
|
The value of true(1) is not mandatory neither is the write access. |
| scsiDscTgtRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.2.1.139.0.0.1 |
This notification will be generated for each occurrence of the
abnormal status (e.g., if the SCSI target device's current status is abnormal) providing that the SCSI instance's value of scsiInstScsiNotificationsEnable is enabled. An SNMP agent implementing the SCSI MIB module should not send more than three SCSI identical notifications in any 10-second period. |
|
.1.3.6.1.2.1.139.0.0.2 |
This notification will be generated each time that
scsiLuStatus changes providing that the SCSI instance's value of scsiInstScsiNotificationsEnable is enabled. An SNMP agent implementing the SCSI MIB module should not send more than three SCSI identical notifications in any 10-second period. |