RUGGEDCOM-SYS-INFO-MIB

Monitored by Observium
        RuggedCom system information MIB.
    
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Device identity Memory Processors Sensors Status
Explore Observium network monitoring
Source file
RUGGEDCOM-SYS-INFO-MIB
Last revised
Identity
rcSysInfo
Base OID
1.3.6.1.4.1.15004.4.2
Imported Objects
RUGGEDCOM-MIB ruggedcomMgmt
SNMPv2-CONF OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the siemens MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RUGGEDCOM-SYS-INFO-MIB' -M '/opt/observium/mibs/siemens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RUGGEDCOM-SYS-INFO-MIB::rcSysInfo'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RUGGEDCOM-SYS-INFO-MIB' -M '/opt/observium/mibs/siemens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RUGGEDCOM-SYS-INFO-MIB::rcSysInfo'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (46)
7 directly used by Observium
.1.3.6.1.4.1.15004.4.2
.1.3.6.1.4.1.15004.4.2.1
.1.3.6.1.4.1.15004.4.2.1.1
.1.3.6.1.4.1.15004.4.2.1.10
.1.3.6.1.4.1.15004.4.2.1.11
.1.3.6.1.4.1.15004.4.2.1.2
.1.3.6.1.4.1.15004.4.2.1.3
.1.3.6.1.4.1.15004.4.2.1.4
.1.3.6.1.4.1.15004.4.2.1.5
.1.3.6.1.4.1.15004.4.2.1.6
.1.3.6.1.4.1.15004.4.2.1.7
.1.3.6.1.4.1.15004.4.2.1.8
.1.3.6.1.4.1.15004.4.2.1.9
.1.3.6.1.4.1.15004.4.2.2
tenths of percentSNMPv2-SMIInteger32
.1.3.6.1.4.1.15004.4.2.2.1
.1.3.6.1.4.1.15004.4.2.2.10
.1.3.6.1.4.1.15004.4.2.2.11
Bits
.1.3.6.1.4.1.15004.4.2.2.12
Bits
.1.3.6.1.4.1.15004.4.2.2.13
.1.3.6.1.4.1.15004.4.2.2.2
Celsius degreesSNMPv2-SMIInteger32
.1.3.6.1.4.1.15004.4.2.2.3
.1.3.6.1.4.1.15004.4.2.2.4
.1.3.6.1.4.1.15004.4.2.2.5
.1.3.6.1.4.1.15004.4.2.2.6
Enumeration
.1.3.6.1.4.1.15004.4.2.2.7
.1.3.6.1.4.1.15004.4.2.2.8
.1.3.6.1.4.1.15004.4.2.2.9
.1.3.6.1.4.1.15004.4.2.3
.1.3.6.1.4.1.15004.4.2.3.1
.1.3.6.1.4.1.15004.4.2.3.2
.1.3.6.1.4.1.15004.4.2.3.3
.1.3.6.1.4.1.15004.4.2.3.4
.1.3.6.1.4.1.15004.4.2.3.5
.1.3.6.1.4.1.15004.4.2.3.6
.1.3.6.1.4.1.15004.4.2.3.7
.1.3.6.1.4.1.15004.4.2.3.8
.1.3.6.1.4.1.15004.4.2.3.9
.1.3.6.1.4.1.15004.4.2.4
.1.3.6.1.4.1.15004.4.2.4.1
.1.3.6.1.4.1.15004.4.2.4.2
.1.3.6.1.4.1.15004.4.2.4.3
.1.3.6.1.4.1.15004.4.2.4.4
.1.3.6.1.4.1.15004.4.2.4.5
Integer32
.1.3.6.1.4.1.15004.4.2.4.6
.1.3.6.1.4.1.15004.4.2.5
.1.3.6.1.4.1.15004.4.2.5.2
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. RUGGEDCOM-MIBsiemens
  3. SNMPv2-CONFrfc
  4. SNMPv2-TCrfc
  5. RUGGEDCOM-SYS-INFO-MIBsiemensselected
Type Definitions (5)
Enumeration
notPresent(1)
failed(2)
standby(3)
off(4)
on(5)
Enumeration
notPresent(1)
functional(2)
notFunctional(3)
notConnected(4)
Enumeration
pm1(1)
lm1(2)
lm2(3)
lm3(4)
cm(5)
sm(6)
lm4(7)
lm5(8)
lm6(9)
pm2(10)
main(11)
em(12)
Enumeration
empty(1)
disabled(2)
resetting(3)
operating(4)
failed(5)
unknown(255)
Enumeration
rsMCPU2(1)
rs400revB2(2)
rmc30(3)
rs900revB1F(4)
rs900revB1noF(5)
rs1600M(6)
rs400revC1(7)
rsG2100(8)
rs900G(9)
rsG2200(10)
rs969(11)
rs900v2F(12)
rs900v2noF(13)
rs416(15)
rsRMC30Ksz80001(16)
rs930(17)
rs969v2(18)
rs910(19)
rs920(20)
rs940G(21)
rsi80x(22)
rsG2300(23)
rs416v2(24)
rsg2288(25)
rp110(26)
rs900GP(27)
rs900M(28)
rs950G(29)
rs900v3F(30)
rs900v3noF(31)
rsg2100v2(32)
rsG2488(61)
rsG2488v2(62)
rsG2488v3(63)
rmc8388A(64)
rmc8388B(65)
rmc8388C(66)
rsG920P(67)
rsl910(68)
rsg9xxc(70)
rsg9xxr(71)
rst2228(129)
rst916(130)
rsMCPU(255)
rx1000(256)
rx1100(257)
rx1500(258)
rx1501(259)
rx1510(260)
rx1511(261)
rx1512(262)
rx5000(263)
mx5000(264)
rx1400(265)
Conformance Groups (12)
A group of objects providing information about irregularities
in the device.
.1.3.6.1.4.1.15004.4.2.5.2.1
A group of objects providing information device resources.
.1.3.6.1.4.1.15004.4.2.5.2.2
This group is created to allow MIBs for products that do not have
temperature sensore installed to exclude rcDeviceStsTemperature
object.
.1.3.6.1.4.1.15004.4.2.5.2.3
A group of objects providing information about power supply modules
in the device. This group is mandatory for products with redundant
power supply.
.1.3.6.1.4.1.15004.4.2.5.2.4
A group of object providing manufacturer's information about
product's main board hardware, software, identification.
.1.3.6.1.4.1.15004.4.2.5.2.5
A group of object providing device control commands.
.1.3.6.1.4.1.15004.4.2.5.2.6
A group of object providing device control commands for
visual recognisation of the device (LED flashing).
.1.3.6.1.4.1.15004.4.2.5.2.7
A group of objects providing information about device resources.
.1.3.6.1.4.1.15004.4.2.5.2.8
A group of objects providing information about fan bank modules
in the device. This group is mandatory for products with redundant
fan banks.
.1.3.6.1.4.1.15004.4.2.5.2.9
A group of object providing device control commands.
.1.3.6.1.4.1.15004.4.2.5.2.10
A group of object providing device control commands.
.1.3.6.1.4.1.15004.4.2.5.2.11
rcDeviceErrSystem (unresolved reference)
A group of objects providing information about device system errors.
.1.3.6.1.4.1.15004.4.2.5.2.12