RPS-SC300-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
34
Rows
34
Columns
299

dialOutNumberTable

table
.1.3.6.1.4.1.1918.2.14.10.30.53.80 · 1 row entry · 2 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk dialOutNumberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::dialOutNumberTable' 
Table for dialOutNumber
dialOutNumberEntry row .1.3.6.1.4.1.1918.2.14.10.30.53.80.1
Entry for dialOutNumber
Indexes
Column Syntax OID
dialOutNumberIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.30.53.80.1.1
dialOutNumber
The telephone numbers to be called (via a modem) if alarm reporting is enabled. Consult the modem documentation for appropriate dial modifiers to use with the ATD command. Leave blank to prevent dial-out.
OctetStringr/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.1918.2.14.10.30.53.80.1.10

smsNotificationTable

table
.1.3.6.1.4.1.1918.2.14.10.30.53.90 · 1 row entry · 6 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk smsNotificationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::smsNotificationTable' 
Table for smsNotification
smsNotificationEntry row .1.3.6.1.4.1.1918.2.14.10.30.53.90.1
Entry for smsNotification
Indexes
Column Syntax OID
smsNotificationIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.30.53.90.1.1
smsPhoneName
A name to identify this phone.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.1918.2.14.10.30.53.90.1.10
smsLevel
Sets the severity of alarms to be reported to this SMS receiver.
SeverityLevelr/w
Type Values:
1warningsAndAbove
2minorAndAbove
3majorAndAbove
4none
5criticalOnly
 .1.3.6.1.4.1.1918.2.14.10.30.53.90.1.20
smsPhoneNumber
The phone number for SMS notifications.
OctetStringr/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.1918.2.14.10.30.53.90.1.30
smsPrefix
This string is prepended to every SMS sent to this number, excluding responses to SMS commands.
OctetStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.1918.2.14.10.30.53.90.1.40
smsEmailGateway
If a gateway address (e.g. phoneNumber@mms.gateway.com) is present send email to the gateway instead of using the modem.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.1918.2.14.10.30.53.90.1.50

snmpTrapReceiverTable

table
.1.3.6.1.4.1.1918.2.14.10.30.60.50 · 1 row entry · 8 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk snmpTrapReceiverTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::snmpTrapReceiverTable' 
Table for snmpTrapReceiver
snmpTrapReceiverEntry row .1.3.6.1.4.1.1918.2.14.10.30.60.50.1
Entry for snmpTrapReceiver
Indexes
Column Syntax OID
snmpTrapReceiverIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.30.60.50.1.1
trapReceiverIpAddress
SNMP notifications of events are sent to this IP address.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.1918.2.14.10.30.60.50.1.20
trapReceiverPort
SNMP notifications of events are sent to this UDP port.
Unsigned16r/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1918.2.14.10.30.60.50.1.30
trapReceiverName
Name used to identify the receiver.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.1918.2.14.10.30.60.50.1.40
trapReceiverLevel
Sets the severity of alarms to be reported to this trap receiver.
SeverityLevelr/w
Type Values:
1warningsAndAbove
2minorAndAbove
3majorAndAbove
4none
5criticalOnly
 .1.3.6.1.4.1.1918.2.14.10.30.60.50.1.50
trapReceiverCommunity
Community to use for traps sent to the receiver.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1918.2.14.10.30.60.50.1.60
trapReceiverMode
Set to Normal traps to send normal traps to a Network Management System on alarm activation and deactivation. Set to Acknowledged Summary Traps to send summary traps to PowerManagerII. These traps are repeated until Pow…
TrapReceiverModer/w
Type Values:
1normalTraps
2acknowledgedSummaryTrap
 .1.3.6.1.4.1.1918.2.14.10.30.60.50.1.70
acknowledgeAlarmSummaryTrap
This command will acknowledge reception of the alarm summary trap.
NoDatar/w
Type Constraints:
range: 0
 .1.3.6.1.4.1.1918.2.14.10.30.60.50.1.80

emailReceiverTable

table
.1.3.6.1.4.1.1918.2.14.10.30.65.60 · 1 row entry · 6 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk emailReceiverTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::emailReceiverTable' 
Table for emailReceiver
emailReceiverEntry row .1.3.6.1.4.1.1918.2.14.10.30.65.60.1
Entry for emailReceiver
Indexes
Column Syntax OID
emailReceiverIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.30.65.60.1.1
emailReceiverAddress
The receiver's email address.
OctetStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.1918.2.14.10.30.65.60.1.10
emailReceiverLevel
Sets the severity of alarms to be reported to this email receiver.
SeverityLevelr/w
Type Values:
1warningsAndAbove
2minorAndAbove
3majorAndAbove
4none
5criticalOnly
 .1.3.6.1.4.1.1918.2.14.10.30.65.60.1.20
emailReceiverDelay
The email will be sent after the delay period, even if the original trigger alarm has become de-activated.
sTimeIntervalInSecondsr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1918.2.14.10.30.65.60.1.30
sendTestEmail
This will send an email notification to the receiver.
NoDatar/w
Type Constraints:
range: 0
 .1.3.6.1.4.1.1918.2.14.10.30.65.60.1.40
smtpResult
Result of the last SMTP operation affecting this receiver. The first digit is the state reached (1 GREET, 2 EHLO, 3 MAIL, 4 RCPT, 5 DATA, 6 BODY). The next 3 digits come from the SMTP service. 2xx = Ok, 4xx = Temporary …
Unsigned16
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1918.2.14.10.30.65.60.1.50

webUserTable

table
.1.3.6.1.4.1.1918.2.14.10.30.80 · 1 row entry · 12 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk webUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::webUserTable' 
Table for webUser
webUserEntry row .1.3.6.1.4.1.1918.2.14.10.30.80.1
Entry for webUser
Indexes
Column Syntax OID
webUserIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.1
userName
The full name of the user. This is for reference only and is not used in the login process.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.10
userLogonId
The logon name of a user.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.21
userLogonPassword
The password for this user.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.31
userActive
Indicates whether this user is enabled or disabled.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.40
userWrite
If checked the user is allowed to modify configurable values.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.60
userRestore
If checked the user is allowed to upload configurations or snapshots.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.70
userBackup
If checked the user is allowed to download configurations or snapshots.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.80
userExecute
If checked the user is allowed to execute commands.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.90
userUpgradeFirmware
If checked the user is allowed to upgrade firmware (including de-installing optional modules).
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.100
userAdministrator
If checked the user is administrator and change security settings.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.110
userSnmp
This user is allowed to modify or only read values. The Password is also used for SNMP authentication.
UserSnmpr/w
Type Values:
0noSnmp
1get
2getSet
 .1.3.6.1.4.1.1918.2.14.10.30.80.1.120

rxpTable

table
.1.3.6.1.4.1.1918.2.14.10.55.10 · 1 row entry · 9 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk rxpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::rxpTable' 
Table for rxp
rxpEntry row .1.3.6.1.4.1.1918.2.14.10.55.10.1
Entry for rxp
Indexes
Column Syntax OID
rxpIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.55.10.1.1
rxpSlaveRegistrationState
Registration state of this device.
RcpSlaveState
Type Values:
0notDetected
1detected
2registered
3commsLost
4missing
5rebooting
 .1.3.6.1.4.1.1918.2.14.10.55.10.1.10
rxpSlaveName
Name of the RXP device.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1918.2.14.10.55.10.1.20
rxpSlaveSerialNumber
The serial number of this device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.55.10.1.30
rxpSlaveType
What type of component (IOB, rectifier etc) this device is.
RxpSlaveType
Type Values:
0unknown
1iob
2rectifier
3solar
4fanController
5dcdc
6dataLogger
 .1.3.6.1.4.1.1918.2.14.10.55.10.1.40
rxpSlaveCommandSet
The id of the command set the controller is using to communicate with this device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.55.10.1.50
rxpBomRevision
Hardware Version of the RXP device.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1918.2.14.10.55.10.1.60
rxpSoftwareVersion
Software Version of the RXP device.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1918.2.14.10.55.10.1.70
identifyRxpSlave
If supported by the RXP device, this causes it to identify itself by flashing some of its LEDs or similar.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.55.10.1.80

iobTable

table
.1.3.6.1.4.1.1918.2.14.10.55.20 · 1 row entry · 10 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk iobTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::iobTable' 
Table for iob
iobEntry row .1.3.6.1.4.1.1918.2.14.10.55.20.1
Entry for iob
Indexes
Column Syntax OID
iobIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.55.20.1.1
iobRegistrationState
Registration state of this IOB.
RcpSlaveState
Type Values:
0notDetected
1detected
2registered
3commsLost
4missing
5rebooting
 .1.3.6.1.4.1.1918.2.14.10.55.20.1.10
iobSerialNumber
Serial number.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.55.20.1.20
iobMapping
Index used in analogue and digitals tables
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.55.20.1.30
iobNumberOfVoltages
Number of voltage inputs on this IOB. The controller numbers the analog inputs on an IOB in the order: voltages, currents, temperatures.
Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.55.20.1.40
iobNumberOfCurrents
Number of current inputs on this IOB. The controller numbers the analog inputs on an IOB in the order: voltages, currents, temperatures.
Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.55.20.1.50
iobNumberOfTemperatures
Number of temperature inputs on this IOB. The controller numbers the analog inputs on an IOB in the order: voltages, currents, temperatures.
Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.55.20.1.60
iobNumberOfDigitalInputs
Number of digital inputs on this IOB.
Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.55.20.1.70
iobNumberOfRelays
Number of digital outputs on this IOB.
Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.55.20.1.80
iobNumberOfLvds
Number of LVD connectors on this IOB.
Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.55.20.1.90

rectifierValuesTable

table
.1.3.6.1.4.1.1918.2.14.10.60.30 · 1 row entry · 26 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk rectifierValuesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::rectifierValuesTable' 
Table for rectifierValues
rectifierValuesEntry row .1.3.6.1.4.1.1918.2.14.10.60.30.1
Entry for rectifierValues
Indexes
Column Syntax OID
rectifierValuesIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.1
rectifierSerialNumber
Rectifier serial number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.30
rectifierType
Rectifier Type.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.40
rectifierInputType
Rectifier Input Type, regular rectifier is AC, Solar Charger is MPPT.
InputType
Type Values:
0ac
1dc
2mppt
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.50
rectifierStatus
The status reported by this rectifier. This value cannot be interpreted without knowing the meaning of the various status bits. This is documented in the RXP command set for rectifiers.
Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.60
rectifierMaximumCurrentLimit
The current limit value of the rectifier. Adjust Rectifier Current Limit to set a lower operating current limit.
AUnsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.70
rectifierMaximumPowerLimit
The maximum output power limit value of the rectifier. Adjust Rectifier Current Limit to set a lower operating power limit.
WDcPower
Type Values:
65535notAvailable
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.80
rectifierMinimumOvsdSetPoint
The minimum OVSD set point that the rectifier accepts.
0.01 VFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.83
rectifierMaximumOvsdSetPoint
The maximum OVSD set point that the rectifier accepts.
0.01 VFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.86
rectifierInputVoltage
The input voltage measured by the rectifier (AC) or Solar (DC).
VFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.90
rectifierReportedVoltage
The output voltage measured by this rectifier. This is measured by the rectifier and reported via the RXP bus.
0.01 VFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.95
rectifierReportedCurrent
The current produced by this rectifier. This is measured by the rectifier and reported via the rectifier comms bus.
AFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.100
rectifierOutputPowerw
The current rectifier output power as Watts.
WDcPower
Type Values:
65535notAvailable
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.103
rectifierOutputPower
The current rectifier output power as a percentage of the power limit under the current operating conditions.
0.1 %Float
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.105
rectifierHeatsinkTemperature
The measured rectifier heatsink temperature.
°CFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.110
rectifierRegistrationState
Registration state of this rectifier.
RcpSlaveState
Type Values:
0notDetected
1detected
2registered
3commsLost
4missing
5rebooting
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.120
rectifierFailedState
A rectifier's failed state.
RectFailState
Type Values:
0notFailed
1badStatus
2badOutput
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.130
loadBasedRunTime
The time the rectifier has been operating since it was registered.
sTimeIntervalInSeconds
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.140
shutdownRectifier
Shuts down the rectifier or restarts it. Use Rectifier Has Been Shutdown to see whether the command has been sent to the rectifier since it can take some seconds.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.150
rectifierHasBeenShutdown
Indicates if the rectifier shutdown command has been sent. Once a Shutdown Rectifier command has been issued some time may elapse before the command is sent to the rectifier. Rectifiers that shut themselves down due to …
Boolean
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.160
rectifierPhase1
Rectifier's AC voltage measured at the input connection for phase 1.
VFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.170
rectifierPhase2
Rectifier's AC voltage measured at the input connection for phase 2.
VFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.180
rectifierPhase3
Rectifier's AC voltage measured at the input connection for phase 3.
VFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.190
rectifierNotes
This text will not be valid if the rectifier is unplugged and is not permanently stored by the controller.
OctetStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.200
rectifierInputCurrent
The input current measured by the rectifier (AC) or Solar (DC).
AFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.210
rectifierPhase
This rectifiers AC phase. The controller is unable to determine which supply is used on a dual feed supply
AcPhase
Type Values:
0acPhase1
1acPhase2
2acPhase3
3n
4unknown
 .1.3.6.1.4.1.1918.2.14.10.60.30.1.220

lvdTable

table
.1.3.6.1.4.1.1918.2.14.10.70.75.50 · 1 row entry · 14 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk lvdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::lvdTable' 
Table for lvd
lvdEntry row .1.3.6.1.4.1.1918.2.14.10.70.75.50.1
Entry for lvd
Indexes
Column Syntax OID
lvdIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.1
lvdName
The name of this LVD.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.5
lvdState
The state of this LVD control process.
LvdState
Type Values:
0idle
1connected
2disconnected
3manual
4noContactors
5remoteConnected
6remoteDisconnected
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.10
lvdInhibited
Indicates whether this LVD currently cannot change state due to the inhibit time.
Boolean
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.15
enableLvdVoltageDisconnect
If Enabled, the LVD will disconnect when the bus voltage falls below the Disconnect Voltage and will not reconnect until it is above the Reconnect Voltage.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.20
lvdDisconnectVoltage
If voltage based disconnect is enabled, the LVD will disconnect if the bus voltage has been below this voltage for the recognition time.
0.01 VFloatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.30
lvdReconnectVoltage
If voltage based disconnect is enabled, the LVD will reconnect only if the bus voltage has been above this voltage for the recognition time.
0.01 VFloatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.40
lvdRecognitionPeriod
The time the bus voltage must be below or above the thresholds before the LVD disconnects or connects.
sTimeIntervalInSecondsr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.50
enableLvdAcTimer
If Enabled, during an AC failure the LVD will disconnect after the AC Timer Delay, even if the Disconnect Voltage has not been reached.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.60
lvdAcTimerDisconnectDelay
If Enabled, the LVD will disconnect after this delay following an AC failure, unless the Disconnect Voltage is reached or AC is restored first.
minTimeIntervalInMinutesr/w
Type Constraints:
range: 0..2147483646
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.70
enableLvdSaDisconnect
If Enabled, the LVD will disconnect immediately when the specified smart alarm becomes active.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.80
lvdSaDisconnectIndex
If Enabled, the LVD will disconnect immediately when this smart alarm becomes active.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.90
enableLvdChainedToPrevious
If Enabled, the LVD will not disconnect until the previous LVD (the LVD numbered one less) has been disconnected for the configured recognition time. This item is ignored by the first LVD and when the previous LVD has n…
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.100
lvdRemoteManualControl
Allows remote manual control of the LVD. Reconnects on remote manual control, remote manual timeout, UI or Smart Alarm manual control or AC-State becomes ok.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.70.75.50.1.120

lvdcTable

table
.1.3.6.1.4.1.1918.2.14.10.70.75.60 · 1 row entry · 7 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk lvdcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::lvdcTable' 
Table for lvdc
lvdcEntry row .1.3.6.1.4.1.1918.2.14.10.70.75.60.1
Entry for lvdc
Indexes
Column Syntax OID
lvdcIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.70.75.60.1.1
lvdcLvdMapping
The LVD that drives this contactor.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.75.60.1.10
lvdcState
The state of this contactor.
LvdcState
Type Values:
0connected
1disconnected
2failed
3missing
4disabled
5conflict
6notCharacterized
 .1.3.6.1.4.1.1918.2.14.10.70.75.60.1.20
enableLvdc
If Enabled, the specified physical contactor is driven by the specified LVD.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.70.75.60.1.30
lvdcIobNumber
The I/O board number to which this LVD contactor is connected.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.75.60.1.40
lvdcIobLvdNumber
The LVD connector on the I/O board that this contactor is connected to.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.75.60.1.50
lvdcType
The type of contactor connected to the I/O board.
LvdcTyper/w
Type Values:
0normallyOpen
1normallyClosed
 .1.3.6.1.4.1.1918.2.14.10.70.75.60.1.60

energyMeterTable

table
.1.3.6.1.4.1.1918.2.14.10.70.87.10 · 1 row entry · 14 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk energyMeterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::energyMeterTable' 
Table for energyMeter
energyMeterEntry row .1.3.6.1.4.1.1918.2.14.10.70.87.10.1
Entry for energyMeter
Indexes
Column Syntax OID
energyMeterIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.1
energyMeterName
The name for this energy meter.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.10
energyMeterGroup
The group tag used by software to group related inputs and outputs for display purposes.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.12
energyMeter
The energy meter reading for this meter.
0.001 kWhFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.15
resetEnergyMeter
Reset this energy meter to zero.
NoDatar/w
Type Constraints:
range: 0
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.20
energyResetDate
The date when this energy meter was reset.
JulianDateUtc25r/w
Type Constraints:
range: 25
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.25
currentMeter
The current reading for this meter.
0.1 AFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.30
voltageMeter
The voltage reading for this meter.
0.01 VFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.35
powerMeter
The power reading for this meter.
0.01 kWFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.40
powerMeterMin
The min. power reading for this meter.
0.01 kWFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.45
powerMeterMax
The max. power reading for this meter.
0.01 kWFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.50
resetPowerMeterRange
Reset this power meter's min. and max.
NoDatar/w
Type Constraints:
range: 0
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.55
powerMeterGain
The scaling factor applied to the raw power value applied to the energy meter.
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.60
powerMeterOffset
The offset applied to the raw energy value applied to the energy meter.
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.87.10.1.65

energyMeterAiMappingTable

table
.1.3.6.1.4.1.1918.2.14.10.70.87.20 · 1 row entry · 4 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk energyMeterAiMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::energyMeterAiMappingTable' 
Table for energyMeterAiMapping
energyMeterAiMappingEntry row .1.3.6.1.4.1.1918.2.14.10.70.87.20.1
Entry for energyMeterAiMapping
Indexes
Column Syntax OID
energyMeterAiMappingIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.70.87.20.1.1
energyMeterMeter
This is the mapping into the Energy-Meter-Name. Zero means it is not mapped.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.87.20.1.10
energyMeterAi
This is the mapping into the Analog-Input-Table. Zero means it is not mapped.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.87.20.1.15
energyMeterAiFunction
This analog input is either Current or Voltage.
EnergyMeterAiFunctionr/w
Type Values:
0current
1voltage
2powerW
3powerKw
 .1.3.6.1.4.1.1918.2.14.10.70.87.20.1.20

energyMeterValueMappingTable

table
.1.3.6.1.4.1.1918.2.14.10.70.87.30 · 1 row entry · 4 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk energyMeterValueMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::energyMeterValueMappingTable' 
Table for energyMeterValueMapping
energyMeterValueMappingEntry row .1.3.6.1.4.1.1918.2.14.10.70.87.30.1
Entry for energyMeterValueMapping
Indexes
Column Syntax OID
energyMeterValueMappingIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.70.87.30.1.1
energyMeterMeterNumber
This is the mapping into the Energy-Meter-Name. Zero means it is not mapped.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.87.30.1.10
energyMeterSystemValue
This is the mapping to a system calculated value. Zero means it is not mapped.
EnergyMeterSystemValuer/w
Type Values:
1busVoltage
2rectifierCurrent
3loadCurrent
4batteryCurrent
5smartAnalogCurrent
6alternativeSourceCurrent
7solarCurrent
8acInputCurrent
9dcInputCurrent
10smartAnalogVoltage
11acVoltage
12dcInputVoltage
13powerMeter
14loadPower
15smartAnalogPowerKw
16smartAnalogPowerW
17solarPower
18generatorCurrent
19pulseMeter
20dcdcVoltage
21dcdcCurrent
22dcdcPower
 .1.3.6.1.4.1.1918.2.14.10.70.87.30.1.15
energyMeterSystemValueIndex
The index of the Energy-Meter-System-Value.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.87.30.1.20

fanControllerStateTable

table
.1.3.6.1.4.1.1918.2.14.10.70.88.30 · 1 row entry · 7 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk fanControllerStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::fanControllerStateTable' 
Table for fanControllerState
fanControllerStateEntry row .1.3.6.1.4.1.1918.2.14.10.70.88.30.1
Entry for fanControllerState
Indexes
Column Syntax OID
fanControllerStateIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.70.88.30.1.1
fanTemperature
Temperature sensor reading. If AI function mapped its value overrides temperature obtained from Fan Controller.
0.1 °CFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.88.30.1.10
fanPower
Power applied to fan output.
%Percentile8Nan
Type Values:
255notAvailable
 .1.3.6.1.4.1.1918.2.14.10.70.88.30.1.20
setFanPower
Manual set the fan power for the Set-Fan-Power-Period.
%Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.88.30.1.30
fanPoles
The number of poles of each fan group is used to calculate fan speed(rpm).
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.88.30.1.40
fanSpeedA
Fan Speed. Only fans with pulse outputs can have a measured speed.
Unsigned16
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1918.2.14.10.70.88.30.1.50
fanSpeedB
Fan Speed. Only fans with pulse outputs can have a measured speed.
Unsigned16
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1918.2.14.10.70.88.30.1.60

fanController1PrimaryTable

table
.1.3.6.1.4.1.1918.2.14.10.70.88.70 · 1 row entry · 3 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk fanController1PrimaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::fanController1PrimaryTable' 
Table for fanController1Primary
fanController1PrimaryEntry row .1.3.6.1.4.1.1918.2.14.10.70.88.70.1
Entry for fanController1Primary
Indexes
Column Syntax OID
fanController1PrimaryIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.70.88.70.1.1
fc1pTemperature
A temperature/power point for this controller.
0.1 °CFloatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.88.70.1.10
fc1pPower
A temperature/power point for this controller.
%Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.88.70.1.20

fanController1SecondaryTable

table
.1.3.6.1.4.1.1918.2.14.10.70.88.90 · 1 row entry · 3 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk fanController1SecondaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::fanController1SecondaryTable' 
Table for fanController1Secondary
fanController1SecondaryEntry row .1.3.6.1.4.1.1918.2.14.10.70.88.90.1
Entry for fanController1Secondary
Indexes
Column Syntax OID
fanController1SecondaryIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.70.88.90.1.1
fc1sTemperature
A temperature/power point for this controller.
0.1 °CFloatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.88.90.1.10
fc1sPower
A temperature/power point for this controller.
%Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.88.90.1.20

fanController2PrimaryTable

table
.1.3.6.1.4.1.1918.2.14.10.70.88.110 · 1 row entry · 3 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk fanController2PrimaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::fanController2PrimaryTable' 
Table for fanController2Primary
fanController2PrimaryEntry row .1.3.6.1.4.1.1918.2.14.10.70.88.110.1
Entry for fanController2Primary
Indexes
Column Syntax OID
fanController2PrimaryIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.70.88.110.1.1
fc2pTemperature
A temperature/power point for this controller.
0.1 °CFloatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.88.110.1.10
fc2pPower
A temperature/power point for this controller.
%Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.88.110.1.20

fanController2SecondaryTable

table
.1.3.6.1.4.1.1918.2.14.10.70.88.130 · 1 row entry · 3 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk fanController2SecondaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::fanController2SecondaryTable' 
Table for fanController2Secondary
fanController2SecondaryEntry row .1.3.6.1.4.1.1918.2.14.10.70.88.130.1
Entry for fanController2Secondary
Indexes
Column Syntax OID
fanController2SecondaryIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.70.88.130.1.1
fc2sTemperature
A temperature/power point for this controller.
0.1 °CFloatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.70.88.130.1.10
fc2sPower
A temperature/power point for this controller.
%Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.70.88.130.1.20

analogInputTable

table
.1.3.6.1.4.1.1918.2.14.10.90.10.30 · 1 row entry · 27 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk analogInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::analogInputTable' 
Table for analogInput
analogInputEntry row .1.3.6.1.4.1.1918.2.14.10.90.10.30.1
Entry for analogInput
Indexes
Column Syntax OID
analogInputIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.1
aiHighState
The state of the selected analog input high alarm.
AlarmActiveState
Type Values:
0notActive
1activeWarning
2activeMajor
3activeMinor
4reserved
5activeCritical
6activeControl
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.20
aiLowState
The state of the selected analog input low alarm.
AlarmActiveState
Type Values:
0notActive
1activeWarning
2activeMajor
3activeMinor
4reserved
5activeCritical
6activeControl
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.30
aiValue
Analog input value.
0.01Float
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.40
aiStatus
Enable/disable this analog input channel.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.50
aiName
The name of this analog input channel as it will appear on management software such as DCTools or PowerManagerII. This name is not displayed on the controller.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.60
aiFunction
Selects how the value of this analog input is to be used by any control functions, if at all.
AiFunctionr/w
Type Values:
1userDefined
2busVoltage
3batteryTemperature
4batteryCurrent
5loadCurrent
6rectifierCurrent
7batteryMidpoint
8reverseBatteryDetect
9alternativeEnergySourceCurrent
10fuelLevel
11smartAnalog
12fanTemperature
13batteryFirstQuarterPoint
14batteryThirdQuarterPoint
15generatorCurrent
16solarCurrent
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.64
aiFunctionIndex
Select an index for the selected function. Only valid where function is Smart-Analog, Battery-Symmetry-Monitoring and Fan-Temperature.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.66
aiUnits
Units of this analog input (after scaling).
MeasurementUnitsr/w
Type Values:
30none
31volts
32milliAmps
33amps
34kiloAmps
35degreeCelsius
36kiloWatts
37percent
38voltsAc
39voltsDc
40ampsAc
41ampsDc
42litre
43litrePerSec
44cubicMeterPerHour
45pascal
46kiloPascal
47mmh2o
48percentRelativeHumidity
49rpm
50hertz
51kiloVoltAmps
52kiloWattHour
53watts
54bar
55psi
56ah
57hours
58minutes
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.70
aiIobNumber
The I/O board number on which this analog input is located.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.80
inputNumber
The input channel on the I/O board of this analog input.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.90
gain
The scaling factor applied to the raw value read from the I/O board.
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.100
offset
The offset applied to the raw value read from the I/O board.
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.110
hysteresis
The amount of hysteresis applied to the input before an active alarm is deactivated.
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.130
highSeverity
The severity level associated with the alarm. Control alarms are not displayed, although any configured digital outputs are still activated.
AlarmSeverityr/w
Type Values:
0disabled
1critical
2major
3minor
4warning
5control
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.141
highThreshold
An analog input high alarm is activated if the scaled input is greater than or equal to this value.
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.150
highDoMappingA
Optional digital output activated while this alarm is active.
RelayMappingr/w
Type Values:
0none
1digitalOutput1
2digitalOutput2
3digitalOutput3
4digitalOutput4
5digitalOutput5
6digitalOutput6
7digitalOutput7
8digitalOutput8
9digitalOutput9
10digitalOutput10
11digitalOutput11
12digitalOutput12
13digitalOutput13
14digitalOutput14
15digitalOutput15
16digitalOutput16
17digitalOutput17
18digitalOutput18
19digitalOutput19
20digitalOutput20
21digitalOutput21
22digitalOutput22
23digitalOutput23
24digitalOutput24
25digitalOutput25
26digitalOutput26
27digitalOutput27
28digitalOutput28
29digitalOutput29
30digitalOutput30
31digitalOutput31
32digitalOutput32
33digitalOutput33
34digitalOutput34
35digitalOutput35
36digitalOutput36
37digitalOutput37
38digitalOutput38
39digitalOutput39
40digitalOutput40
41digitalOutput41
42digitalOutput42
43digitalOutput43
44digitalOutput44
45digitalOutput45
46digitalOutput46
47digitalOutput47
48digitalOutput48
49digitalOutput49
50digitalOutput50
51digitalOutput51
52digitalOutput52
53digitalOutput53
54digitalOutput54
55digitalOutput55
56digitalOutput56
57digitalOutput57
58digitalOutput58
59digitalOutput59
60digitalOutput60
61digitalOutput61
62digitalOutput62
63digitalOutput63
64digitalOutput64
65digitalOutput65
66digitalOutput66
67digitalOutput67
68digitalOutput68
69digitalOutput69
70digitalOutput70
71digitalOutput71
72digitalOutput72
73digitalOutput73
74digitalOutput74
75digitalOutput75
76digitalOutput76
77digitalOutput77
78digitalOutput78
79digitalOutput79
80digitalOutput80
81digitalOutput81
82digitalOutput82
83digitalOutput83
84digitalOutput84
85digitalOutput85
86digitalOutput86
87digitalOutput87
88digitalOutput88
89digitalOutput89
90digitalOutput90
91digitalOutput91
92digitalOutput92
93digitalOutput93
94digitalOutput94
95digitalOutput95
96digitalOutput96
97digitalOutput97
98digitalOutput98
99digitalOutput99
100digitalOutput100
101digitalOutput101
102digitalOutput102
103digitalOutput103
104digitalOutput104
105digitalOutput105
106digitalOutput106
107digitalOutput107
108digitalOutput108
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.160
highDoMappingB
Optional digital output activated while this alarm is active.
RelayMappingr/w
Type Values:
0none
1digitalOutput1
2digitalOutput2
3digitalOutput3
4digitalOutput4
5digitalOutput5
6digitalOutput6
7digitalOutput7
8digitalOutput8
9digitalOutput9
10digitalOutput10
11digitalOutput11
12digitalOutput12
13digitalOutput13
14digitalOutput14
15digitalOutput15
16digitalOutput16
17digitalOutput17
18digitalOutput18
19digitalOutput19
20digitalOutput20
21digitalOutput21
22digitalOutput22
23digitalOutput23
24digitalOutput24
25digitalOutput25
26digitalOutput26
27digitalOutput27
28digitalOutput28
29digitalOutput29
30digitalOutput30
31digitalOutput31
32digitalOutput32
33digitalOutput33
34digitalOutput34
35digitalOutput35
36digitalOutput36
37digitalOutput37
38digitalOutput38
39digitalOutput39
40digitalOutput40
41digitalOutput41
42digitalOutput42
43digitalOutput43
44digitalOutput44
45digitalOutput45
46digitalOutput46
47digitalOutput47
48digitalOutput48
49digitalOutput49
50digitalOutput50
51digitalOutput51
52digitalOutput52
53digitalOutput53
54digitalOutput54
55digitalOutput55
56digitalOutput56
57digitalOutput57
58digitalOutput58
59digitalOutput59
60digitalOutput60
61digitalOutput61
62digitalOutput62
63digitalOutput63
64digitalOutput64
65digitalOutput65
66digitalOutput66
67digitalOutput67
68digitalOutput68
69digitalOutput69
70digitalOutput70
71digitalOutput71
72digitalOutput72
73digitalOutput73
74digitalOutput74
75digitalOutput75
76digitalOutput76
77digitalOutput77
78digitalOutput78
79digitalOutput79
80digitalOutput80
81digitalOutput81
82digitalOutput82
83digitalOutput83
84digitalOutput84
85digitalOutput85
86digitalOutput86
87digitalOutput87
88digitalOutput88
89digitalOutput89
90digitalOutput90
91digitalOutput91
92digitalOutput92
93digitalOutput93
94digitalOutput94
95digitalOutput95
96digitalOutput96
97digitalOutput97
98digitalOutput98
99digitalOutput99
100digitalOutput100
101digitalOutput101
102digitalOutput102
103digitalOutput103
104digitalOutput104
105digitalOutput105
106digitalOutput106
107digitalOutput107
108digitalOutput108
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.170
highTrapSend
If set to true an SNMP trap is sent to every trap receiver with an appropriate trap level whenever this alarm changes state.
SendTrapr/w
Type Values:
0none
1both
2activation
4deactivation
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.175
lowSeverity
The severity level associated with the alarm. Control alarms are not displayed, although any configured digital outputs are still activated.
AlarmSeverityr/w
Type Values:
0disabled
1critical
2major
3minor
4warning
5control
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.181
lowThreshold
An analog input low alarm is activated if the scaled input is lower than or equal to this value.
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.190
lowDoMappingA
Optional digital output activated while this alarm is active.
RelayMappingr/w
Type Values:
0none
1digitalOutput1
2digitalOutput2
3digitalOutput3
4digitalOutput4
5digitalOutput5
6digitalOutput6
7digitalOutput7
8digitalOutput8
9digitalOutput9
10digitalOutput10
11digitalOutput11
12digitalOutput12
13digitalOutput13
14digitalOutput14
15digitalOutput15
16digitalOutput16
17digitalOutput17
18digitalOutput18
19digitalOutput19
20digitalOutput20
21digitalOutput21
22digitalOutput22
23digitalOutput23
24digitalOutput24
25digitalOutput25
26digitalOutput26
27digitalOutput27
28digitalOutput28
29digitalOutput29
30digitalOutput30
31digitalOutput31
32digitalOutput32
33digitalOutput33
34digitalOutput34
35digitalOutput35
36digitalOutput36
37digitalOutput37
38digitalOutput38
39digitalOutput39
40digitalOutput40
41digitalOutput41
42digitalOutput42
43digitalOutput43
44digitalOutput44
45digitalOutput45
46digitalOutput46
47digitalOutput47
48digitalOutput48
49digitalOutput49
50digitalOutput50
51digitalOutput51
52digitalOutput52
53digitalOutput53
54digitalOutput54
55digitalOutput55
56digitalOutput56
57digitalOutput57
58digitalOutput58
59digitalOutput59
60digitalOutput60
61digitalOutput61
62digitalOutput62
63digitalOutput63
64digitalOutput64
65digitalOutput65
66digitalOutput66
67digitalOutput67
68digitalOutput68
69digitalOutput69
70digitalOutput70
71digitalOutput71
72digitalOutput72
73digitalOutput73
74digitalOutput74
75digitalOutput75
76digitalOutput76
77digitalOutput77
78digitalOutput78
79digitalOutput79
80digitalOutput80
81digitalOutput81
82digitalOutput82
83digitalOutput83
84digitalOutput84
85digitalOutput85
86digitalOutput86
87digitalOutput87
88digitalOutput88
89digitalOutput89
90digitalOutput90
91digitalOutput91
92digitalOutput92
93digitalOutput93
94digitalOutput94
95digitalOutput95
96digitalOutput96
97digitalOutput97
98digitalOutput98
99digitalOutput99
100digitalOutput100
101digitalOutput101
102digitalOutput102
103digitalOutput103
104digitalOutput104
105digitalOutput105
106digitalOutput106
107digitalOutput107
108digitalOutput108
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.200
lowDoMappingB
Optional digital output activated while this alarm is active.
RelayMappingr/w
Type Values:
0none
1digitalOutput1
2digitalOutput2
3digitalOutput3
4digitalOutput4
5digitalOutput5
6digitalOutput6
7digitalOutput7
8digitalOutput8
9digitalOutput9
10digitalOutput10
11digitalOutput11
12digitalOutput12
13digitalOutput13
14digitalOutput14
15digitalOutput15
16digitalOutput16
17digitalOutput17
18digitalOutput18
19digitalOutput19
20digitalOutput20
21digitalOutput21
22digitalOutput22
23digitalOutput23
24digitalOutput24
25digitalOutput25
26digitalOutput26
27digitalOutput27
28digitalOutput28
29digitalOutput29
30digitalOutput30
31digitalOutput31
32digitalOutput32
33digitalOutput33
34digitalOutput34
35digitalOutput35
36digitalOutput36
37digitalOutput37
38digitalOutput38
39digitalOutput39
40digitalOutput40
41digitalOutput41
42digitalOutput42
43digitalOutput43
44digitalOutput44
45digitalOutput45
46digitalOutput46
47digitalOutput47
48digitalOutput48
49digitalOutput49
50digitalOutput50
51digitalOutput51
52digitalOutput52
53digitalOutput53
54digitalOutput54
55digitalOutput55
56digitalOutput56
57digitalOutput57
58digitalOutput58
59digitalOutput59
60digitalOutput60
61digitalOutput61
62digitalOutput62
63digitalOutput63
64digitalOutput64
65digitalOutput65
66digitalOutput66
67digitalOutput67
68digitalOutput68
69digitalOutput69
70digitalOutput70
71digitalOutput71
72digitalOutput72
73digitalOutput73
74digitalOutput74
75digitalOutput75
76digitalOutput76
77digitalOutput77
78digitalOutput78
79digitalOutput79
80digitalOutput80
81digitalOutput81
82digitalOutput82
83digitalOutput83
84digitalOutput84
85digitalOutput85
86digitalOutput86
87digitalOutput87
88digitalOutput88
89digitalOutput89
90digitalOutput90
91digitalOutput91
92digitalOutput92
93digitalOutput93
94digitalOutput94
95digitalOutput95
96digitalOutput96
97digitalOutput97
98digitalOutput98
99digitalOutput99
100digitalOutput100
101digitalOutput101
102digitalOutput102
103digitalOutput103
104digitalOutput104
105digitalOutput105
106digitalOutput106
107digitalOutput107
108digitalOutput108
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.210
lowTrapSend
If set to true an SNMP trap is sent to every trap receiver with an appropriate trap level whenever this alarm changes state.
SendTrapr/w
Type Values:
0none
1both
2activation
4deactivation
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.215
aiGroup
The group tag used by software to group related inputs and outputs for display purposes.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.220
aiHighNotes
User notes about this alarm. These notes appear in SNMP traps and can be viewed using DCTools or PowerManagerII.
OctetStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.230
aiLowNotes
User notes about this alarm. These notes appear in SNMP traps and can be viewed using DCTools or PowerManagerII.
OctetStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.1918.2.14.10.90.10.30.1.240

smartAnalogTable

table
.1.3.6.1.4.1.1918.2.14.10.90.10.40 · 1 row entry · 9 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk smartAnalogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::smartAnalogTable' 
Table for smartAnalog
smartAnalogEntry row .1.3.6.1.4.1.1918.2.14.10.90.10.40.1
Entry for smartAnalog
Indexes
Column Syntax OID
smartAnalogIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.90.10.40.1.1
name
The name of these smart inputs.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.1918.2.14.10.90.10.40.1.10
group
The group tag used by software to group related inputs and outputs for display purposes.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.10.40.1.20
value
Value derived from the analog inputs configured as smart analogs.
0.01Float
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.90.10.40.1.30
type
How values are derived from the analog inputs.
SmartAnalogTyper/w
Type Values:
0average
1addition
2multiplication
3max
4min
5kmultiplication
 .1.3.6.1.4.1.1918.2.14.10.90.10.40.1.40
units
The units of the analog inputs. Units for a Smart Analog will be taken from the first configured analog input mapped to it.
OctetString
Constraints:
range: 0-7
 .1.3.6.1.4.1.1918.2.14.10.90.10.40.1.50
smartAnalogGate
The value can be clipped.
SmartAnalogGater/w
Type Values:
0normal
1positiveOnly
2negativeOnly
3absolute
4change
 .1.3.6.1.4.1.1918.2.14.10.90.10.40.1.60
saiFunction
Selects how the value of this analog input is to be used by any control functions, if at all.
AiFunctionr/w
Type Values:
1userDefined
2busVoltage
3batteryTemperature
4batteryCurrent
5loadCurrent
6rectifierCurrent
7batteryMidpoint
8reverseBatteryDetect
9alternativeEnergySourceCurrent
10fuelLevel
11smartAnalog
12fanTemperature
13batteryFirstQuarterPoint
14batteryThirdQuarterPoint
15generatorCurrent
16solarCurrent
 .1.3.6.1.4.1.1918.2.14.10.90.10.40.1.70
saiFunctionIndex
Select an index for the selected function if required.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.10.40.1.80

smartAnalogMappingTable

table
.1.3.6.1.4.1.1918.2.14.10.90.10.45 · 1 row entry · 6 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk smartAnalogMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::smartAnalogMappingTable' 
Table for smartAnalogMapping
smartAnalogMappingEntry row .1.3.6.1.4.1.1918.2.14.10.90.10.45.1
Entry for smartAnalogMapping
Indexes
Column Syntax OID
smartAnalogMappingIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.90.10.45.1.1
smartAnalogSystemInputMapping
Index of smart analogue that this system value is mapped to.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.10.45.1.10
smartAnalogSystemInputValue
Value derived from the system input configured as smart analogs.
0.01Float
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.90.10.45.1.20
smartAnalogSystemInput
How values are derived from the analog inputs.
SystemInputTyper/w
Type Values:
1rectifierCurrent
2loadCurrent
3batteryCurrent
4smartAnalog
5alternativeSourceCurrent
6solarCurrent
7acInputCurrent
8dcInputCurrent
9acVoltage
10dcInputVoltage
11powerMeter
12loadPower
13solarPower
14generatorCurrent
15ampHourDischarged
16btrTimeRemaining
17operatingVoltage
18firstQuarterPointVoltage
19thirdQuarterPointVoltage
20midPointVoltage
21imbalancePercent
22fanTemperature
23fanPower
24dcdcVoltage
25dcdcCurrent
26dcdcPower
27dcdcHeatsinkTemperature
28dcInputVoltageMax
29dcInputVoltageMin
30busVoltage
 .1.3.6.1.4.1.1918.2.14.10.90.10.45.1.30
smartAnalogSystemInputIndex
If required this, is the system input index.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.10.45.1.40
smartAnalogSystemInputInvert
The system input value multiplied by -1 if true.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.90.10.45.1.50

digitalInputTable

table
.1.3.6.1.4.1.1918.2.14.10.90.40 · 1 row entry · 16 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk digitalInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::digitalInputTable' 
Table for digitalInput
digitalInputEntry row .1.3.6.1.4.1.1918.2.14.10.90.40.1
Entry for digitalInput
Indexes
Column Syntax OID
digitalInputIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.1
diState
The state of this digital input alarm.
AlarmActiveState
Type Values:
0notActive
1activeWarning
2activeMajor
3activeMinor
4reserved
5activeCritical
6activeControl
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.20
diValue
The state of this digital input.
DigitalInputState
Type Values:
1missing
2closed
3open
4disabled
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.30
diStatus
Enable/disable this digital input channel.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.40
diName
The name of the digital input.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.50
diIobNumber
The I/O board number on which this digital input is located.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.60
digitalInputNumber
The input channel on the I/O board of this digital input.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.70
diSeverity
The severity level associated with the alarm. Control alarms are not displayed, although any configured digital outputs are still activated.
AlarmSeverityr/w
Type Values:
0disabled
1critical
2major
3minor
4warning
5control
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.81
diRecognitionPeriod
A digital input alarm will become active if the input is in the active state for the recognition time.
sTimeIntervalInSecondsr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.85
diDeactivationRecognitionPeriod
A digital input alarm will deactivate if the input is in the inactive state for the deactivation recognition time.
sTimeIntervalInSecondsr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.86
diDoMappingA
Optional digital output activated while this digital input alarm is active.
RelayMappingr/w
Type Values:
0none
1digitalOutput1
2digitalOutput2
3digitalOutput3
4digitalOutput4
5digitalOutput5
6digitalOutput6
7digitalOutput7
8digitalOutput8
9digitalOutput9
10digitalOutput10
11digitalOutput11
12digitalOutput12
13digitalOutput13
14digitalOutput14
15digitalOutput15
16digitalOutput16
17digitalOutput17
18digitalOutput18
19digitalOutput19
20digitalOutput20
21digitalOutput21
22digitalOutput22
23digitalOutput23
24digitalOutput24
25digitalOutput25
26digitalOutput26
27digitalOutput27
28digitalOutput28
29digitalOutput29
30digitalOutput30
31digitalOutput31
32digitalOutput32
33digitalOutput33
34digitalOutput34
35digitalOutput35
36digitalOutput36
37digitalOutput37
38digitalOutput38
39digitalOutput39
40digitalOutput40
41digitalOutput41
42digitalOutput42
43digitalOutput43
44digitalOutput44
45digitalOutput45
46digitalOutput46
47digitalOutput47
48digitalOutput48
49digitalOutput49
50digitalOutput50
51digitalOutput51
52digitalOutput52
53digitalOutput53
54digitalOutput54
55digitalOutput55
56digitalOutput56
57digitalOutput57
58digitalOutput58
59digitalOutput59
60digitalOutput60
61digitalOutput61
62digitalOutput62
63digitalOutput63
64digitalOutput64
65digitalOutput65
66digitalOutput66
67digitalOutput67
68digitalOutput68
69digitalOutput69
70digitalOutput70
71digitalOutput71
72digitalOutput72
73digitalOutput73
74digitalOutput74
75digitalOutput75
76digitalOutput76
77digitalOutput77
78digitalOutput78
79digitalOutput79
80digitalOutput80
81digitalOutput81
82digitalOutput82
83digitalOutput83
84digitalOutput84
85digitalOutput85
86digitalOutput86
87digitalOutput87
88digitalOutput88
89digitalOutput89
90digitalOutput90
91digitalOutput91
92digitalOutput92
93digitalOutput93
94digitalOutput94
95digitalOutput95
96digitalOutput96
97digitalOutput97
98digitalOutput98
99digitalOutput99
100digitalOutput100
101digitalOutput101
102digitalOutput102
103digitalOutput103
104digitalOutput104
105digitalOutput105
106digitalOutput106
107digitalOutput107
108digitalOutput108
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.90
diDoMappingB
Optional digital output activated while this digital input alarm is active.
RelayMappingr/w
Type Values:
0none
1digitalOutput1
2digitalOutput2
3digitalOutput3
4digitalOutput4
5digitalOutput5
6digitalOutput6
7digitalOutput7
8digitalOutput8
9digitalOutput9
10digitalOutput10
11digitalOutput11
12digitalOutput12
13digitalOutput13
14digitalOutput14
15digitalOutput15
16digitalOutput16
17digitalOutput17
18digitalOutput18
19digitalOutput19
20digitalOutput20
21digitalOutput21
22digitalOutput22
23digitalOutput23
24digitalOutput24
25digitalOutput25
26digitalOutput26
27digitalOutput27
28digitalOutput28
29digitalOutput29
30digitalOutput30
31digitalOutput31
32digitalOutput32
33digitalOutput33
34digitalOutput34
35digitalOutput35
36digitalOutput36
37digitalOutput37
38digitalOutput38
39digitalOutput39
40digitalOutput40
41digitalOutput41
42digitalOutput42
43digitalOutput43
44digitalOutput44
45digitalOutput45
46digitalOutput46
47digitalOutput47
48digitalOutput48
49digitalOutput49
50digitalOutput50
51digitalOutput51
52digitalOutput52
53digitalOutput53
54digitalOutput54
55digitalOutput55
56digitalOutput56
57digitalOutput57
58digitalOutput58
59digitalOutput59
60digitalOutput60
61digitalOutput61
62digitalOutput62
63digitalOutput63
64digitalOutput64
65digitalOutput65
66digitalOutput66
67digitalOutput67
68digitalOutput68
69digitalOutput69
70digitalOutput70
71digitalOutput71
72digitalOutput72
73digitalOutput73
74digitalOutput74
75digitalOutput75
76digitalOutput76
77digitalOutput77
78digitalOutput78
79digitalOutput79
80digitalOutput80
81digitalOutput81
82digitalOutput82
83digitalOutput83
84digitalOutput84
85digitalOutput85
86digitalOutput86
87digitalOutput87
88digitalOutput88
89digitalOutput89
90digitalOutput90
91digitalOutput91
92digitalOutput92
93digitalOutput93
94digitalOutput94
95digitalOutput95
96digitalOutput96
97digitalOutput97
98digitalOutput98
99digitalOutput99
100digitalOutput100
101digitalOutput101
102digitalOutput102
103digitalOutput103
104digitalOutput104
105digitalOutput105
106digitalOutput106
107digitalOutput107
108digitalOutput108
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.100
diTrapSend
If set to true an SNMP trap is sent to every trap receiver with an appropriate trap level whenever this alarm changes state.
SendTrapr/w
Type Values:
0none
1both
2activation
4deactivation
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.105
diActiveState
Selects whether the input should be considered active when closed or open.
ActiveStater/w
Type Values:
2closed
3open
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.110
diGroup
The group tag used by software to group related inputs and outputs for display purposes.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.120
diNotes
User notes about this alarm. These notes appear in SNMP traps and can be viewed using DCTools or PowerManagerII.
OctetStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.1918.2.14.10.90.40.1.130

digitalOutputTable

table
.1.3.6.1.4.1.1918.2.14.10.90.50 · 1 row entry · 9 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk digitalOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::digitalOutputTable' 
Table for digitalOutput
digitalOutputEntry row .1.3.6.1.4.1.1918.2.14.10.90.50.1
Entry for digitalOutput
Indexes
Column Syntax OID
digitalOutputIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.90.50.1.1
doState
The state of this digital output. Active digital outputs may be energized or de-energized depending on their configuration.
ExternalRelayState
Type Values:
0active
1inactive
2missing
3disabled
4conflict
 .1.3.6.1.4.1.1918.2.14.10.90.50.1.20
remoteControlState
Allows manual control of the digital output.
RelayControlStater/w
Type Values:
0active
1automatic
2inactive
 .1.3.6.1.4.1.1918.2.14.10.90.50.1.40
doStatus
Enable or disable this digital output. If disabled, the digital output is not driven.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.90.50.1.50
doName
The name of the digital output.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.1918.2.14.10.90.50.1.60
doIobNumber
The I/O board number on which this digital output is located.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.50.1.70
doIobDoNumber
The number of the digital output channel on the I/O board.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.50.1.80
doActiveState
Active state of the digital output.
EnergizeStater/w
Type Values:
0deenergized
1energized
 .1.3.6.1.4.1.1918.2.14.10.90.50.1.90
doGroup
The group tag used by software to group related inputs and outputs for display purposes.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.90.50.1.100

midpointMonitoringStringTable

table
.1.3.6.1.4.1.1918.2.14.10.100.50.70 · 1 row entry · 7 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk midpointMonitoringStringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::midpointMonitoringStringTable' 
Table for midpointMonitoringString
midpointMonitoringStringEntry row .1.3.6.1.4.1.1918.2.14.10.100.50.70.1
Entry for midpointMonitoringString
Indexes
Column Syntax OID
midpointMonitoringStringIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.100.50.70.1.1
stringName
Name of the battery string.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.1918.2.14.10.100.50.70.1.10
stringState
Indicates the current state of a battery string.
BsmBatteryState
Type Values:
0ok
1pendingFail
2failed
3unavailable
4notConfigured
 .1.3.6.1.4.1.1918.2.14.10.100.50.70.1.20
firstQuarterPointVoltage
1/4 point voltage reading for the battery string.
0.01 VFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.100.50.70.1.25
midPointVoltage
Midpoint voltage reading for the battery string.
0.01 VFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.100.50.70.1.30
thirdQuarterPointVoltage
3/4 point voltage reading for the battery string.
0.01 VFloat
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.100.50.70.1.35
imbalancePercent
The voltage difference between the first half of the string and the second half of the string expressed in percent of the Bus Voltage.
0.1 %Float
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.100.50.70.1.40

batteryCharacterizationDataTable

table
.1.3.6.1.4.1.1918.2.14.10.100.62 · 1 row entry · 3 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk batteryCharacterizationDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::batteryCharacterizationDataTable' 
Table for batteryCharacterizationData
batteryCharacterizationDataEntry row .1.3.6.1.4.1.1918.2.14.10.100.62.1
Entry for batteryCharacterizationData
Indexes
Column Syntax OID
batteryCharacterizationDataIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.100.62.1.1
batteryCharacterizationSample
Stores battery specific data necessary to predict the time remaining during a discharge. It is possible to transfer this data to a different system with the same type of battery, but it may not be as accurate as charact…
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.100.62.1.10
batteryCharacterizationTime
Stores battery specific data necessary to predict the time remaining during a discharge. It is possible to transfer this data to a different system with the same type of battery, but it may not be as accurate as charact…
minTimeIntervalInMinutesr/w
Type Constraints:
range: 0..2147483646
 .1.3.6.1.4.1.1918.2.14.10.100.62.1.20

logItemsTable

table
.1.3.6.1.4.1.1918.2.14.10.107.40 · 1 row entry · 4 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk logItemsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::logItemsTable' 
Table for logItems
logItemsEntry row .1.3.6.1.4.1.1918.2.14.10.107.40.1
Entry for logItems
Indexes
Column Syntax OID
logItemsIndex
Automatically generated index object.
LogItems
Type Values:
0smartAnalogs
1generatorControl
2energyMeters
3powerMeters
4otherMeters
5fanController
6data
7batterySymmetryMonitoring
 .1.3.6.1.4.1.1918.2.14.10.107.40.1.1
logInterval
The time between each log record.
sTimeIntervalInSecondsr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1918.2.14.10.107.40.1.10
useOffNormal
While off normal use the When-Off-Normal interval.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.107.40.1.20
logNumberOfEntries
The number of log entries of this type since power was applied.
Unsigned16
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1918.2.14.10.107.40.1.30

threadLoadingTable

table
.1.3.6.1.4.1.1918.2.14.10.108.10 · 1 row entry · 7 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk threadLoadingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::threadLoadingTable' 
Table for threadLoading
threadLoadingEntry row .1.3.6.1.4.1.1918.2.14.10.108.10.1
Entry for threadLoading
Indexes
Column Syntax OID
threadLoadingIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.108.10.1.1
threadName
Name of this thread.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.1918.2.14.10.108.10.1.20
threadLoading
The percentage of CPU loading caused by this thread.
0.1 %Float
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.108.10.1.30
threadPriority
Thread priority. Expect to see high priority thread use least cpu time.
ThreadPriority
Type Values:
0idle
1user
2system
3realtime
 .1.3.6.1.4.1.1918.2.14.10.108.10.1.40
threadStack
The amount of stack used by this thread.
BSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.108.10.1.50
threadHeap
The amount of heap used by this thread.
BSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.108.10.1.60
threadHighWaterMark
The maximum heap used by this thread.
BSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.108.10.1.70

alarmTable

table
.1.3.6.1.4.1.1918.2.14.10.110.10 · 1 row entry · 9 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk alarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::alarmTable' 
Table for alarm
alarmEntry row .1.3.6.1.4.1.1918.2.14.10.110.10.1
Entry for alarm
Indexes
Column Syntax OID
alarmIndex
Automatically generated index object.
SystemAlarm
Type Values:
0lowFloat
1lowLoad
2highFloat
3highLoad
4rectifierFail
5multipleRectifierFail
6rectifierCommsLost
7multipleRectifierCommsLost
8partialAcFail
9acFail
10systemOverload
11loadFuseFail
12batteryFuseFail
13batteryTestFail
14movFail
15acdFanFail
16lvd1Disconnected
17lvd1Fail
18lvd1Manual
19lvd2Disconnected
20lvd2Fail
21lvd2Manual
22batteryTemperatureLow
23batteryTemperatureHigh
24sensorFail
25equalize
26fastCharge
27batteryTest
28auxiliarySensorFail
29inDischarge
30batteryCurrentLimit
31rectifierNoLoad
32rectifierCurrentLimit
33rectifierOverTemperature
34acPhase1Fail
35acPhase1Voltage
36acPhase2Fail
37acPhase2Voltage
38acPhase3Fail
39acPhase3Voltage
40acFrequency
41reserved
42cabinetFanFail
43unmappedIobFound
44unknownHardware
45iobCommsLost
46standbyMode
47lvd1CharacterizationError
48lvd2CharacterizationError
49stringFail
50generatorFail
51lvdDisconnected
52lvdFail
53lvdManual
54lvdCharacterizationError
55configurationError
56wrongBatteryPolarity
57characterizingBattery
58doManual
59normalCharge
60peakLoadReduction
61siteBackupTimeRemaining
62dcdcFail
63solarFail
64systemOverloadB
65batteryEndOfLife
66rtcLowBattery
67batteryTestCancelled
68lowRectifierCapacity
69solarCommsLost
70multipleSolarCommsLost
71unstableRectifierAc
72ripCommsLost
 .1.3.6.1.4.1.1918.2.14.10.110.10.1.1
alarmName
The name of the Alarm.
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.1918.2.14.10.110.10.1.20
alarmSeverity
The severity level associated with the alarm. Control alarms are not displayed, although any configured digital outputs are still activated.
AlarmSeverityr/w
Type Values:
0disabled
1critical
2major
3minor
4warning
5control
 .1.3.6.1.4.1.1918.2.14.10.110.10.1.31
alarmState
The state of this alarm.
AlarmActiveState
Type Values:
0notActive
1activeWarning
2activeMajor
3activeMinor
4reserved
5activeCritical
6activeControl
 .1.3.6.1.4.1.1918.2.14.10.110.10.1.40
alarmNotes
User notes about this alarm. These notes appear in SNMP traps and can be viewed using DCTools or PowerManagerII.
OctetStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.1918.2.14.10.110.10.1.50
alarmDoMappingA
Optional digital output activated while this alarm is active.
RelayMappingr/w
Type Values:
0none
1digitalOutput1
2digitalOutput2
3digitalOutput3
4digitalOutput4
5digitalOutput5
6digitalOutput6
7digitalOutput7
8digitalOutput8
9digitalOutput9
10digitalOutput10
11digitalOutput11
12digitalOutput12
13digitalOutput13
14digitalOutput14
15digitalOutput15
16digitalOutput16
17digitalOutput17
18digitalOutput18
19digitalOutput19
20digitalOutput20
21digitalOutput21
22digitalOutput22
23digitalOutput23
24digitalOutput24
25digitalOutput25
26digitalOutput26
27digitalOutput27
28digitalOutput28
29digitalOutput29
30digitalOutput30
31digitalOutput31
32digitalOutput32
33digitalOutput33
34digitalOutput34
35digitalOutput35
36digitalOutput36
37digitalOutput37
38digitalOutput38
39digitalOutput39
40digitalOutput40
41digitalOutput41
42digitalOutput42
43digitalOutput43
44digitalOutput44
45digitalOutput45
46digitalOutput46
47digitalOutput47
48digitalOutput48
49digitalOutput49
50digitalOutput50
51digitalOutput51
52digitalOutput52
53digitalOutput53
54digitalOutput54
55digitalOutput55
56digitalOutput56
57digitalOutput57
58digitalOutput58
59digitalOutput59
60digitalOutput60
61digitalOutput61
62digitalOutput62
63digitalOutput63
64digitalOutput64
65digitalOutput65
66digitalOutput66
67digitalOutput67
68digitalOutput68
69digitalOutput69
70digitalOutput70
71digitalOutput71
72digitalOutput72
73digitalOutput73
74digitalOutput74
75digitalOutput75
76digitalOutput76
77digitalOutput77
78digitalOutput78
79digitalOutput79
80digitalOutput80
81digitalOutput81
82digitalOutput82
83digitalOutput83
84digitalOutput84
85digitalOutput85
86digitalOutput86
87digitalOutput87
88digitalOutput88
89digitalOutput89
90digitalOutput90
91digitalOutput91
92digitalOutput92
93digitalOutput93
94digitalOutput94
95digitalOutput95
96digitalOutput96
97digitalOutput97
98digitalOutput98
99digitalOutput99
100digitalOutput100
101digitalOutput101
102digitalOutput102
103digitalOutput103
104digitalOutput104
105digitalOutput105
106digitalOutput106
107digitalOutput107
108digitalOutput108
 .1.3.6.1.4.1.1918.2.14.10.110.10.1.60
alarmDoMappingB
Optional second digital output activated while this alarm is active.
RelayMappingr/w
Type Values:
0none
1digitalOutput1
2digitalOutput2
3digitalOutput3
4digitalOutput4
5digitalOutput5
6digitalOutput6
7digitalOutput7
8digitalOutput8
9digitalOutput9
10digitalOutput10
11digitalOutput11
12digitalOutput12
13digitalOutput13
14digitalOutput14
15digitalOutput15
16digitalOutput16
17digitalOutput17
18digitalOutput18
19digitalOutput19
20digitalOutput20
21digitalOutput21
22digitalOutput22
23digitalOutput23
24digitalOutput24
25digitalOutput25
26digitalOutput26
27digitalOutput27
28digitalOutput28
29digitalOutput29
30digitalOutput30
31digitalOutput31
32digitalOutput32
33digitalOutput33
34digitalOutput34
35digitalOutput35
36digitalOutput36
37digitalOutput37
38digitalOutput38
39digitalOutput39
40digitalOutput40
41digitalOutput41
42digitalOutput42
43digitalOutput43
44digitalOutput44
45digitalOutput45
46digitalOutput46
47digitalOutput47
48digitalOutput48
49digitalOutput49
50digitalOutput50
51digitalOutput51
52digitalOutput52
53digitalOutput53
54digitalOutput54
55digitalOutput55
56digitalOutput56
57digitalOutput57
58digitalOutput58
59digitalOutput59
60digitalOutput60
61digitalOutput61
62digitalOutput62
63digitalOutput63
64digitalOutput64
65digitalOutput65
66digitalOutput66
67digitalOutput67
68digitalOutput68
69digitalOutput69
70digitalOutput70
71digitalOutput71
72digitalOutput72
73digitalOutput73
74digitalOutput74
75digitalOutput75
76digitalOutput76
77digitalOutput77
78digitalOutput78
79digitalOutput79
80digitalOutput80
81digitalOutput81
82digitalOutput82
83digitalOutput83
84digitalOutput84
85digitalOutput85
86digitalOutput86
87digitalOutput87
88digitalOutput88
89digitalOutput89
90digitalOutput90
91digitalOutput91
92digitalOutput92
93digitalOutput93
94digitalOutput94
95digitalOutput95
96digitalOutput96
97digitalOutput97
98digitalOutput98
99digitalOutput99
100digitalOutput100
101digitalOutput101
102digitalOutput102
103digitalOutput103
104digitalOutput104
105digitalOutput105
106digitalOutput106
107digitalOutput107
108digitalOutput108
 .1.3.6.1.4.1.1918.2.14.10.110.10.1.70
alarmTrapSend
If set to true an SNMP trap is sent to every trap receiver with an appropriate trap level whenever this alarm changes state.
SendTrapr/w
Type Values:
0none
1both
2activation
4deactivation
 .1.3.6.1.4.1.1918.2.14.10.110.10.1.80
alarmStateChangeTime
The time when this alarm last changed state.
JulianDateUtc25
Type Constraints:
range: 25
 .1.3.6.1.4.1.1918.2.14.10.110.10.1.90

smartAlarmTable

table
.1.3.6.1.4.1.1918.2.14.10.110.20 · 1 row entry · 14 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk smartAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::smartAlarmTable' 
Table for smartAlarm
smartAlarmEntry row .1.3.6.1.4.1.1918.2.14.10.110.20.1
Entry for smartAlarm
Indexes
Column Syntax OID
smartAlarmIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.1
smartAlarmTrapSend
If set to true an SNMP trap is sent to every trap receiver with an appropriate trap level whenever this alarm changes state.
SendTrapr/w
Type Values:
0none
1both
2activation
4deactivation
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.10
smartAlarmName
Alarm name.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.20
smartAlarmSeverity
The severity level associated with the alarm. Control alarms are not displayed, although any configured digital outputs are still activated.
AlarmSeverityr/w
Type Values:
0disabled
1critical
2major
3minor
4warning
5control
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.30
smartAlarmGroup
The group number used by SiteManager. The group only affects the display of this item in SiteManager. It does not affect controller operation.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.35
smartAlarmNotes
User notes about this alarm.
OctetStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.40
smartAlarmOperator
The logic operator used to combine the states of all sources mapped to this smart alarm.
AlarmOperatorr/w
Type Values:
0and
1or
2xor
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.50
smartAlarmRecognitionPeriod
A smart alarm will become active if the logic for this alarm is continuously true for the recognition time.
sTimeIntervalInSecondsr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.60
smartAlarmDeactivationRecognitionPeriod
A smart alarm will deactivate if the logic for this alarm is continuously false for the deactivation recognition time.
sTimeIntervalInSecondsr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.61
smartAlarmDoMappingA
Optional digital output activated while this alarm is active.
RelayMappingr/w
Type Values:
0none
1digitalOutput1
2digitalOutput2
3digitalOutput3
4digitalOutput4
5digitalOutput5
6digitalOutput6
7digitalOutput7
8digitalOutput8
9digitalOutput9
10digitalOutput10
11digitalOutput11
12digitalOutput12
13digitalOutput13
14digitalOutput14
15digitalOutput15
16digitalOutput16
17digitalOutput17
18digitalOutput18
19digitalOutput19
20digitalOutput20
21digitalOutput21
22digitalOutput22
23digitalOutput23
24digitalOutput24
25digitalOutput25
26digitalOutput26
27digitalOutput27
28digitalOutput28
29digitalOutput29
30digitalOutput30
31digitalOutput31
32digitalOutput32
33digitalOutput33
34digitalOutput34
35digitalOutput35
36digitalOutput36
37digitalOutput37
38digitalOutput38
39digitalOutput39
40digitalOutput40
41digitalOutput41
42digitalOutput42
43digitalOutput43
44digitalOutput44
45digitalOutput45
46digitalOutput46
47digitalOutput47
48digitalOutput48
49digitalOutput49
50digitalOutput50
51digitalOutput51
52digitalOutput52
53digitalOutput53
54digitalOutput54
55digitalOutput55
56digitalOutput56
57digitalOutput57
58digitalOutput58
59digitalOutput59
60digitalOutput60
61digitalOutput61
62digitalOutput62
63digitalOutput63
64digitalOutput64
65digitalOutput65
66digitalOutput66
67digitalOutput67
68digitalOutput68
69digitalOutput69
70digitalOutput70
71digitalOutput71
72digitalOutput72
73digitalOutput73
74digitalOutput74
75digitalOutput75
76digitalOutput76
77digitalOutput77
78digitalOutput78
79digitalOutput79
80digitalOutput80
81digitalOutput81
82digitalOutput82
83digitalOutput83
84digitalOutput84
85digitalOutput85
86digitalOutput86
87digitalOutput87
88digitalOutput88
89digitalOutput89
90digitalOutput90
91digitalOutput91
92digitalOutput92
93digitalOutput93
94digitalOutput94
95digitalOutput95
96digitalOutput96
97digitalOutput97
98digitalOutput98
99digitalOutput99
100digitalOutput100
101digitalOutput101
102digitalOutput102
103digitalOutput103
104digitalOutput104
105digitalOutput105
106digitalOutput106
107digitalOutput107
108digitalOutput108
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.70
smartAlarmDoMappingB
Optional digital output activated while this alarm is active.
RelayMappingr/w
Type Values:
0none
1digitalOutput1
2digitalOutput2
3digitalOutput3
4digitalOutput4
5digitalOutput5
6digitalOutput6
7digitalOutput7
8digitalOutput8
9digitalOutput9
10digitalOutput10
11digitalOutput11
12digitalOutput12
13digitalOutput13
14digitalOutput14
15digitalOutput15
16digitalOutput16
17digitalOutput17
18digitalOutput18
19digitalOutput19
20digitalOutput20
21digitalOutput21
22digitalOutput22
23digitalOutput23
24digitalOutput24
25digitalOutput25
26digitalOutput26
27digitalOutput27
28digitalOutput28
29digitalOutput29
30digitalOutput30
31digitalOutput31
32digitalOutput32
33digitalOutput33
34digitalOutput34
35digitalOutput35
36digitalOutput36
37digitalOutput37
38digitalOutput38
39digitalOutput39
40digitalOutput40
41digitalOutput41
42digitalOutput42
43digitalOutput43
44digitalOutput44
45digitalOutput45
46digitalOutput46
47digitalOutput47
48digitalOutput48
49digitalOutput49
50digitalOutput50
51digitalOutput51
52digitalOutput52
53digitalOutput53
54digitalOutput54
55digitalOutput55
56digitalOutput56
57digitalOutput57
58digitalOutput58
59digitalOutput59
60digitalOutput60
61digitalOutput61
62digitalOutput62
63digitalOutput63
64digitalOutput64
65digitalOutput65
66digitalOutput66
67digitalOutput67
68digitalOutput68
69digitalOutput69
70digitalOutput70
71digitalOutput71
72digitalOutput72
73digitalOutput73
74digitalOutput74
75digitalOutput75
76digitalOutput76
77digitalOutput77
78digitalOutput78
79digitalOutput79
80digitalOutput80
81digitalOutput81
82digitalOutput82
83digitalOutput83
84digitalOutput84
85digitalOutput85
86digitalOutput86
87digitalOutput87
88digitalOutput88
89digitalOutput89
90digitalOutput90
91digitalOutput91
92digitalOutput92
93digitalOutput93
94digitalOutput94
95digitalOutput95
96digitalOutput96
97digitalOutput97
98digitalOutput98
99digitalOutput99
100digitalOutput100
101digitalOutput101
102digitalOutput102
103digitalOutput103
104digitalOutput104
105digitalOutput105
106digitalOutput106
107digitalOutput107
108digitalOutput108
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.80
smartAlarmState
The state of this alarm.
AlarmActiveState
Type Values:
0notActive
1activeWarning
2activeMajor
3activeMinor
4reserved
5activeCritical
6activeControl
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.100
clearSmartAlarm
This will temporarily override the alarm logic and force the alarm to deactivate. If this does not cause the trigger conditions for the alarm to change (for instance through a circular dependency), the alarm will reacti…
NoDatar/w
Type Constraints:
range: 0
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.110
smartAlarmSendEmail
Send email on activation. It is treated as having Critical severity. This is not affected by the actual Smart alarm severity.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.110.20.1.120

sourceAlarmTable

table
.1.3.6.1.4.1.1918.2.14.10.110.30 · 1 row entry · 10 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk sourceAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::sourceAlarmTable' 
Table for sourceAlarm
sourceAlarmEntry row .1.3.6.1.4.1.1918.2.14.10.110.30.1
Entry for sourceAlarm
Indexes
Column Syntax OID
sourceAlarmIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.110.30.1.1
smartAlarmAlarmSourceTriggerState
Indicates the trigger state of this source alarm.
SourceState
Type Values:
0inactiveClear
1inactiveArmed
2activeClear
3activeArmed
4cycle
5invalid
 .1.3.6.1.4.1.1918.2.14.10.110.30.1.10
smartAlarmAlarmSourceStatus
Enable or disable this smart alarm source.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.110.30.1.20
smartAlarmAlarmSourceMapping
Index of smart alarm that this source is mapped to.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.110.30.1.30
smartAlarmAlarmSourceTrigger
Determines whether the source alarm's recognition time (if any) is taken into account. If the source alarm is itself a smart alarm and the sources of one or more smart alarms form a cyclic dependency, then at least one …
SourceTriggerr/w
Type Values:
0triggered
1active
 .1.3.6.1.4.1.1918.2.14.10.110.30.1.41
smartAlarmAlarmSourceType
The alarm table this source alarm is taken from.
AlarmTyper/w
Type Values:
0systemAlarm
1aiHigh
2aiLow
3di
4smartAlarm
5do
 .1.3.6.1.4.1.1918.2.14.10.110.30.1.50
smartAlarmAlarmSourceIndex
The index of the source alarm.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.110.30.1.60
smartAlarmAlarmSourceActiveCount
Count of edge transitions required to make this output become active. 1 = output follows input.
Unsigned16r/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1918.2.14.10.110.30.1.70
smartAlarmAlarmSourceInactiveCount
Count of edge transitions required to make this output become inactive. 1 = output follows input.
Unsigned16r/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1918.2.14.10.110.30.1.80
smartAlarmAlarmSourceCount
Transition count.
Signed16
Type Constraints:
range: -32768..32767
 .1.3.6.1.4.1.1918.2.14.10.110.30.1.90

sourceScheduleTable

table
.1.3.6.1.4.1.1918.2.14.10.110.40 · 1 row entry · 10 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk sourceScheduleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::sourceScheduleTable' 
Table for sourceSchedule
sourceScheduleEntry row .1.3.6.1.4.1.1918.2.14.10.110.40.1
Entry for sourceSchedule
Indexes
Column Syntax OID
sourceScheduleIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.110.40.1.1
smartAlarmScheduleSourceIsTriggered
Indicates whether or not this schedule is currently considered true or false.
SourceState
Type Values:
0inactiveClear
1inactiveArmed
2activeClear
3activeArmed
4cycle
5invalid
 .1.3.6.1.4.1.1918.2.14.10.110.40.1.10
smartAlarmScheduleSourceStatus
Enable or disable this smart alarm schedule.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.110.40.1.20
smartAlarmScheduleSourceMapping
Index of smart alarm that this schedule is mapped to.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.110.40.1.30
smartAlarmScheduleSourceFirstActivation
The date and time at which this schedule will activate for the first time.
JulianDateUtc25r/w
Type Constraints:
range: 25
 .1.3.6.1.4.1.1918.2.14.10.110.40.1.50
smartAlarmScheduleSourceDuration
This source will become active every Interval after the First Activation and remain active for Duration each time.
minTimeIntervalInMinutesr/w
Type Constraints:
range: 0..2147483646
 .1.3.6.1.4.1.1918.2.14.10.110.40.1.60
smartAlarmScheduleSourceInterval
This source will become active every Interval after the First Activation and remain active for Duration each time.
minTimeIntervalInMinutesr/w
Type Constraints:
range: 0..2147483646
 .1.3.6.1.4.1.1918.2.14.10.110.40.1.70
smartAlarmScheduleSourceRepetitions
The number of times this schedule should activate. After the last activation period, this schedule will remain inactive indefinitely. If set to zero, there is no limit on the number of activations.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.110.40.1.80
smartAlarmScheduleSourceNext
The date and time at which this schedule will activate next.
JulianDateUtc25
Type Constraints:
range: 25
 .1.3.6.1.4.1.1918.2.14.10.110.40.1.90
smartAlarmScheduleSourceEnd
The date and time at which this schedule will deactivate for the last time.
JulianDateUtc25
Type Constraints:
range: 25
 .1.3.6.1.4.1.1918.2.14.10.110.40.1.100

systemValueSourceTable

table
.1.3.6.1.4.1.1918.2.14.10.110.50 · 1 row entry · 13 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk systemValueSourceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::systemValueSourceTable' 
Table for systemValueSource
systemValueSourceEntry row .1.3.6.1.4.1.1918.2.14.10.110.50.1
Entry for systemValueSource
Indexes
Column Syntax OID
systemValueSourceIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.1
smartAlarmSystemValueSourceIsTriggered
Indicates whether or not this analog source is currently considered true or false.
SourceState
Type Values:
0inactiveClear
1inactiveArmed
2activeClear
3activeArmed
4cycle
5invalid
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.10
smartAlarmSystemValueSourceStatus
Enable or disable this smart alarm analog source.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.20
smartAlarmSystemValueAlarmMapping
Index of smart alarm that this analog source is mapped to.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.30
smartAlarmSystemValueSourceValue
The system value that is compared with the threshold.
SystemValueSourceValuer/w
Type Values:
0busVoltage
1rectifierCurrent
2loadCurrent
3batteryCurrent
4batteryTemperature
5loadPower
6systemPower
7ahDischarged
8numberOfRectifiersFailed
9numberOfRectifiersCommsLost
10acVoltage
11batteryTimeRemaining
12alternativeSourceCurrent
13highestRectifierHeatsinkTemperature
14fuelLevel
15generatorBackupTime
16fuelRemainingTime
17smartAnalog
18energyMeter
19powerMeter
20currentMeter
21voltageMeter
22solarPower
23rectifierInputVoltage
24solarCurrent
25dcInputVoltage
26generatorCurrent
27batteryHealth
28acInputCurrent
29dcInputCurrent
30operatingVoltage
31fanTemperature
32fanPower
33dcdcVoltage
34dcdcCurrent
35dcdcPower
36dcdcHeatsinkTemperature
37dcInputVoltageMax
38dcInputVoltageMin
39numberOfSolarCommsLost
40solarInputVoltage
41numberOfSolarFailed
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.40
smartAlarmSystemValueSourceValueIndex
The index of the selected system value.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.42
smartAlarmSystemValueSourceInput
Shows the actual value of the selected system value that is compared against the threshold.
0.01Float
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.45
smartAlarmSystemValueSourceThresholdType
Determines whether the threshold is an upper or lower threshold to the system value.
ThresholdTyper/w
Type Values:
0high
1low
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.50
smartAlarmSystemValueSourceThreshold
The threshold, the system value is compared to.
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.60
smartAlarmSystemValueSourceHysteresis
If non-zero, the system value must exceed the threshold +/- this value before the source becomes false again.
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.65
smartAlarmSystemValueSourceActiveCount
Count of edge transitions required to make this output become active. 1 = output follows input.
Unsigned16r/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.70
smartAlarmSystemValueSourceInactiveCount
Count of edge transitions required to make this output become inactive. 1 = output follows input.
Unsigned16r/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.80
smartAlarmSystemValueSourceCount
Transition count.
Signed16
Type Constraints:
range: -32768..32767
 .1.3.6.1.4.1.1918.2.14.10.110.50.1.90

sourceManualTable

table
.1.3.6.1.4.1.1918.2.14.10.110.60 · 1 row entry · 6 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk sourceManualTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::sourceManualTable' 
Table for sourceManual
sourceManualEntry row .1.3.6.1.4.1.1918.2.14.10.110.60.1
Entry for sourceManual
Indexes
Column Syntax OID
sourceManualIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.110.60.1.1
smartAlarmIsManualSourceTriggered
Indicates whether or not this manual source is currently considered true or false.
SourceState
Type Values:
0inactiveClear
1inactiveArmed
2activeClear
3activeArmed
4cycle
5invalid
 .1.3.6.1.4.1.1918.2.14.10.110.60.1.10
smartAlarmSourceManualStatus
Enable or disable this smart alarm manual.
EnableStater/w
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1918.2.14.10.110.60.1.20
smartAlarmSourceManualTrigger
Trigger input for this manual Alarm.
Booleanr/w
Type Values:
0false
1true
 .1.3.6.1.4.1.1918.2.14.10.110.60.1.30
smartAlarmSourceManualMapping
Index of smart alarm that this manual is mapped to.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.110.60.1.40
smartAlarmSourceManualPeriod
When non-zero, this source will oscillate at this period. Alarm deactivation and activation recognition times affect on/off time (duty ratio).
sTimeIntervalInSecondsr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1918.2.14.10.110.60.1.50

smartAlarmNamedItemsTable

table
.1.3.6.1.4.1.1918.2.14.10.110.70 · 1 row entry · 8 columns
Open in standard view
Uses the eaton variant from /opt/observium/mibs/eaton.
Command help
Walk smartAlarmNamedItemsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPS-SC300-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPS-SC300-MIB::smartAlarmNamedItemsTable' 
Table for smartAlarmNamedItems
smartAlarmNamedItemsEntry row .1.3.6.1.4.1.1918.2.14.10.110.70.1
Entry for smartAlarmNamedItems
Indexes
Column Syntax OID
smartAlarmNamedItemsIndex
Automatically generated index object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.1918.2.14.10.110.70.1.1
smartAlarmItemMapping
Index of smart alarm that this item is mapped to.
Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1918.2.14.10.110.70.1.10
smartAlarmItemValue
Value derived from the item.
0.01Float
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.110.70.1.20
smartAlarmItemName
The name of the item. Optionally append ':' then the index.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.1918.2.14.10.110.70.1.30
smartAlarmItemTriggerState
Indicates the trigger state of this source alarm after comparing its value with its zero value.
SourceState
Type Values:
0inactiveClear
1inactiveArmed
2activeClear
3activeArmed
4cycle
5invalid
 .1.3.6.1.4.1.1918.2.14.10.110.70.1.50
smartAlarmItemThresholdType
Determines whether the threshold is an upper or lower threshold to the system value.
ThresholdTyper/w
Type Values:
0high
1low
 .1.3.6.1.4.1.1918.2.14.10.110.70.1.60
smartAlarmItemThreshold
The threshold, the system value is compared to.
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.110.70.1.70
smartAlarmItemHysteresis
If non-zero, the system value must exceed the threshold +/- this value before the source becomes false again.
0.01Floatr/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1918.2.14.10.110.70.1.80