ROUTING6-MIB Table View

There is no global administrative flag for router advertisement.  The global
routing flag (agentIpv6RoutingMode) will be used for this purpose.  If routing
is disabled, router advertisement is disabled as well.

agentIpv6RouterAdvertisementEntry row .1.3.6.1.4.1.7244.2.30.1.3.1

Indexes

agentIpv6RouterAdvertisementIfIndex

Column	Syntax	OID
agentIpv6RouterAdvertisementIfIndex Interface Number to configure Router Advertisement on.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.7244.2.30.1.3.1.1
agentIpv6RouterAdvertisementSuppressMode Enable or disable router advertisement suppression on the interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7244.2.30.1.3.1.2
agentIpv6RouterAdvertisementMaxAdvertisementInterval Maximum time allowed between sending router advertisements from the interface. (Max * 0.75 >= Min)	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.7244.2.30.1.3.1.3
agentIpv6RouterAdvertisementMinAdvertisementInterval Mimimum time allowed between sending router advertisements from the interface. (Max * 0.75 >= Min)	Integer32r/w Constraints: range: 3-1350	.1.3.6.1.4.1.7244.2.30.1.3.1.4
agentIpv6RouterAdvertisementAdvertisementLifetime Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval.	Integer32r/w Constraints: range: 0-9000	.1.3.6.1.4.1.7244.2.30.1.3.1.5
agentIpv6RouterAdvertisementNbrSolicitInterval Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. The valid value range is 1000..4294967295	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.3.1.6
agentIpv6RouterAdvertisementReachableTime Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval.	Integer32r/w Constraints: range: 0-3600000	.1.3.6.1.4.1.7244.2.30.1.3.1.7
agentIpv6RouterAdvertisementManagedFlag Value of managed config field of router advertisement sent from the interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7244.2.30.1.3.1.8
agentIpv6RouterAdvertisementOtherFlag Value of other config field of router advertisement sent from the interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7244.2.30.1.3.1.9

The list of IPv6 address prefixes of
IPv6 interfaces.

agentIpv6AddrPrefixEntry row .1.3.6.1.4.1.7244.2.30.1.4.1

An interface entry containing objects of
a particular IPv6 address prefix.

Indexes

agentIpv6InterfaceIfIndex agentIpv6AddrPrefix agentIpv6AddrPrefixLength

Column	Syntax	OID
agentIpv6AddrPrefix The prefix associated with the this interface.	IPV6-TCIpv6AddressPrefix Type Constraints: range: 0..16	.1.3.6.1.4.1.7244.2.30.1.4.1.1
agentIpv6AddrPrefixLength The length of the prefix (in bits).	bitsInteger32 Constraints: range: 0-128	.1.3.6.1.4.1.7244.2.30.1.4.1.2
agentIpv6AddrPrefixOnLinkFlag This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7244.2.30.1.4.1.3
agentIpv6AddrPrefixAutonomousFlag Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoc…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7244.2.30.1.4.1.4
agentIpv6AddrPrefixAdvPreferredLifetime It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix shoul…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.4.1.5
agentIpv6AddrPrefixAdvValidLifetime It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.4.1.6

The table of addressing information relevant to
this node's interface addresses.

agentIpv6AddrEntry row .1.3.6.1.4.1.7244.2.30.1.5.1

The addressing information for one of this
node's interface addresses.

Indexes

agentIpv6InterfaceIfIndex agentIpv6AddrAddress

Column	Syntax	OID
agentIpv6AddrAddress The IPv6 address to which this entry's addressing information pertains.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.7244.2.30.1.5.1.1
agentIpv6AddrPfxLength The length of the prefix (in bits) associated with the IPv6 address of this entry.	bitsInteger32r/w Constraints: range: 0-128	.1.3.6.1.4.1.7244.2.30.1.5.1.2
agentIpv6AddrEui64Flag This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7244.2.30.1.5.1.3
agentIpv6AddrStatus Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7244.2.30.1.5.1.4

IPv6 Static Routing table. This table contains
an entry for each valid IPv6 static unicast route
that can be used for packet forwarding
determination.

agentIpv6StaticRouteEntry row .1.3.6.1.4.1.7244.2.30.1.6.1

A routing entry.

Indexes

agentIpv6StaticRouteDest agentIpv6StaticRoutePfxLength agentIpv6StaticRouteIfIndex agentIpv6StaticRouteNextHop

Column	Syntax	OID
agentIpv6StaticRouteDest The destination IPv6 address of this route. This object may not take a Multicast address value.	IPV6-TCIpv6AddressPrefix Type Constraints: range: 0..16	.1.3.6.1.4.1.7244.2.30.1.6.1.1
agentIpv6StaticRoutePfxLength Indicates the prefix length of the destination address.	bitsInteger32 Constraints: range: 0-128	.1.3.6.1.4.1.7244.2.30.1.6.1.2
agentIpv6StaticRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified…	IPV6-TCIpv6IfIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.7244.2.30.1.6.1.3
agentIpv6StaticRouteNextHop The address of the next system en route.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.7244.2.30.1.6.1.4
agentIpv6StaticRoutePreference The routing preference metric for this route. A lower value is more preferred.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.7244.2.30.1.6.1.5
agentIpv6StaticRouteStatus Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the i…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7244.2.30.1.6.1.6

IPv6 Service Port Prefix Table. This table contains
an entry for each valid IPv6 prefix configured on the
Service Port.

agentIpv6ServicePortPrefixEntry row .1.3.6.1.4.1.7244.2.30.1.7.1.1

An IPv6 Service Port Prefix entry.

Indexes

agentIpv6ServicePortPrefixIndex

Column	Syntax	OID
agentIpv6ServicePortPrefixIndex The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.7.1.1.1
agentIpv6ServicePortPrefix The Ipv6 Prefix Address configured on the Service Port.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.7244.2.30.1.7.1.1.2
agentIpv6ServicePortPrefixLength The length of the IPv6 Prefix Address.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.7.1.1.3

IPv6 Service Port Default Router Table. This table contains
an entry for each valid IPv6 Default Router configured on the
Service Port.

agentIpv6ServicePortDefaultRouterEntry row .1.3.6.1.4.1.7244.2.30.1.7.2.1

An IPv6 Service Port Default Router entry.

Indexes

agentIpv6ServicePortDefaultRouterIndex

Column	Syntax	OID
agentIpv6ServicePortDefaultRouterIndex The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.7.2.1.1
agentIpv6ServicePortDefaultRouter The Address of the IPv6 Default Router configured on the Service Port.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.7244.2.30.1.7.2.1.2

IPv6 Service Port Neighbor Table. This table contains
an entry for each valid IPv6 Neighbor configured on the
Service Port.

agentIpv6ServicePortNbrEntry row .1.3.6.1.4.1.7244.2.30.1.7.3.1

An IPv6 Service Port Neighbor entry.

Indexes

agentIpv6ServicePortNbrAddr

Column	Syntax	OID
agentIpv6ServicePortNbrAddr The Ipv6 Address of a neighbor switch visible to the Service Port.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.7244.2.30.1.7.3.1.1
agentIpv6ServicePortNbrPhysAddr The MacAddress of the neighboring switch.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7244.2.30.1.7.3.1.2
agentIpv6ServicePortNbrState The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from…	Enumeration Enumerated Values: 1 reachable 2 stale 3 delay 4 probe 6 unknown	.1.3.6.1.4.1.7244.2.30.1.7.3.1.3
agentIpv6ServicePortNbrUpdated The last sysUpTime that this neighbor has been updated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7244.2.30.1.7.3.1.4
agentIpv6ServicePortNbrIsRouter Returns true(1) if the neighbor machine is a router, false(2) otherwise.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7244.2.30.1.7.3.1.5

IPv6 Neighbor Table. This table contains an entry 
for each valid IPv6 Neighbor configured

agentIpv6NeighborEntry row .1.3.6.1.4.1.7244.2.30.1.9.1.1

An IPv6 Neighbor entry.

Indexes

agentIpv6NeighborIfIndex agentIpv6NeighborAddress

Column	Syntax	OID
agentIpv6NeighborIfIndex A unique non-zero value identifying the particular IPv6 interface.	IPV6-TCIpv6IfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.7244.2.30.1.9.1.1.1
agentIpv6NeighborAddress The Ipv6 Address of a neighbor switch visible	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.7244.2.30.1.9.1.1.2
agentIpv6NeighborMacAddress The MacAddress of the neighboring switch.	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.7244.2.30.1.9.1.1.3
agentIpv6NeighborIsRouter Returns true(1) if the neighbor machine is a router, false(2) otherwise.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7244.2.30.1.9.1.1.4
agentIpv6NeighborState The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from…	Enumeration Enumerated Values: 1 reachable 2 stale 3 delay 4 probe 5 invalid 6 unknown	.1.3.6.1.4.1.7244.2.30.1.9.1.1.5
agentIpv6NeighborLastUpdated The last sysUpTime that this neighbor has been updated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7244.2.30.1.9.1.1.6

IPv6 static Neighbor Table. This table contains an entry 
for each valid IPv6 static Neighbor configured

agentIpv6StaticNeighborEntry row .1.3.6.1.4.1.7244.2.30.1.9.2.1

An IPv6 static Neighbor entry.

Indexes

agentIpv6StaticNeighborIfIndex

Column	Syntax	OID
agentIpv6StaticNeighborIfIndex A unique non-zero value identifying the particular IPv6 interface.	IPV6-TCIpv6IfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.7244.2.30.1.9.2.1.1
agentIpv6StaticNeighborAddress The Ipv6 Address of a static neighbor switch visible	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.7244.2.30.1.9.2.1.2
agentIpv6StaticNeighborMacAddress The MacAddress of the static neighboring switch.	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.7244.2.30.1.9.2.1.3

Information about the DHCPv6 Client parameters on the interfaces.

agentDhcp6ClientParametersEntry row .1.3.6.1.4.1.7244.2.30.1.11.1

DHCPv6 Client information on an interface.

Indexes

agentDhcp6ClientInterfaceIndex

Column	Syntax	OID
agentDhcp6ClientInterfaceIndex The Interface index on which the IPv6 address is leased by the DHCPv6 Server.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.11.1.1
agentDhcp6ClientPrefix The IPv6 Prefix leased by the DHCPv6 Server.	IPV6-TCIpv6AddressPrefix Type Constraints: range: 0..16	.1.3.6.1.4.1.7244.2.30.1.11.1.2
agentDhcp6ClientPrefixlength The Prefix length corresponding to the IPv6 Prefix leased by the DHCPv6 Server.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7244.2.30.1.11.1.3
agentDhcp6ClientState The State of the DHCPv6 Client on this interface.	Enumeration Enumerated Values: 0 inactive 1 solicit 2 request 3 active 4 renew 5 rebind 6 release	.1.3.6.1.4.1.7244.2.30.1.11.1.4
agentDhcp6ClientServerDUID The DHCPv6 Unique Identifier of the DHCPv6 Server on this interface.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.7244.2.30.1.11.1.5
agentDhcp6ClientT1Time The T1 (in seconds) time as indicated by the DHCPv6 Server. T1 value indicates the time interval after which the address is requested for renewal.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.11.1.6
agentDhcp6ClientT2Time The T2 (in seconds) time as indicated by the DHCPv6 Server. T2 value indicates the time interval after which the Client sends Rebind message to the Server incase there are no replies to the Renew messages.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.11.1.7
agentDhcp6ClientIAID An identifier for an identity association chosen by this Client.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.11.1.8
agentDhcp6ClientPreferredLifeTime The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.11.1.9
agentDhcp6ClientValidLifeTime The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.11.1.10
agentDhcp6ClientRenewTime The time (in seconds) remaining to send a DHCPv6 Renew request to DHCPv6 Server for the leased address.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.11.1.11
agentDhcp6ClientExpireTime The time (in seconds) when the DHCPv6 leased address expires.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.1.11.1.12

This table contains the MIB objects required to configure 
route-redistribution for RIPng. Here, RIPng is the Destination
protocol and the source protocols can be any of : BGP, OSPF,
Static, Connected.

agentRipngRouteRedistEntry row .1.3.6.1.4.1.7244.2.30.2.9.1

Indexes

agentRipngRouteRedistSource

Column	Syntax	OID
agentRipngRouteRedistSource Source route, from which RIPng can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry.	Enumeration Enumerated Values: 1 connected 2 static 3 ospf	.1.3.6.1.4.1.7244.2.30.2.9.1.1
agentRipngRouteRedistMode User enabels/disables route-redistribution for a particular source protocol.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7244.2.30.2.9.1.2
agentRipngRouteRedistMetric Metric used for redistributing a particular source protocol route into RIPng. {0} indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..15).	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.7244.2.30.2.9.1.3
agentRipngRouteRedistMetricConfigured Flag to determine whether RIPng redistribute-metric is configured or not. Set to 'false' to unconfigure redistribute metric. Set to 'true' is not allowed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7244.2.30.2.9.1.4

The Ripng Interface Table describes the  inter-
faces from the viewpoint of Ripng.

agentRipngIfEntry row .1.3.6.1.4.1.7244.2.30.2.13.1

The Ripng Interface Entry describes one inter-
face from the viewpoint of Ripng.

Indexes

agentRipngIfIndex

Column	Syntax	OID
agentRipngIfIndex The IfIndex associated with this instance.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.7244.2.30.2.13.1.1
agentRipngIfAdminMode Configures interface mode of Ripng.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7244.2.30.2.13.1.2
agentRipngIfPassiveMode Flag to determine whether the interface is passive. A passive interface will not participate in the Ripng adjacency formation.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7244.2.30.2.13.1.3

This table contains the MIB objects required to configure 
route-redistribution for OSPF. Here, OSPF is the Destination
protocol and the source protocols can be any of : BGP, RIP,
Static, Connected.

agentOspfv3RouteRedistEntry row .1.3.6.1.4.1.7244.2.30.3.8.1

Indexes

agentOspfv3RouteRedistSource

Column	Syntax	OID
agentOspfv3RouteRedistSource Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry.	Enumeration Enumerated Values: 1 connected 2 static	.1.3.6.1.4.1.7244.2.30.3.8.1.1
agentOspfv3RouteRedistMode User enabels/disables route-redistribution for a particular source protocol.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7244.2.30.3.8.1.2
agentOspfv3RouteRedistMetric Metric used for redistributing a particular source protocol route into OSPF.	Integer32r/w Constraints: range: 0-16777214	.1.3.6.1.4.1.7244.2.30.3.8.1.3
agentOspfv3RouteRedistMetricConfigured Flag to determine whether OSPF redistribute-metric is configured or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7244.2.30.3.8.1.4
agentOspfv3RouteRedistMetricType Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).	Enumerationr/w Enumerated Values: 1 externalType1 2 externalType2	.1.3.6.1.4.1.7244.2.30.3.8.1.5
agentOspfv3RouteRedistTag It specifies the tag field in routes redistributed by OSPF.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.3.8.1.6

The OSPF Interface Table describes the  inter-
faces from the viewpoint of OSPF.  Augments 
 ospfIfTable from the OSPF-MIB.

agentOspfv3IfEntry row .1.3.6.1.4.1.7244.2.30.3.9.1

The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF. Augments
ospfIfEntry in OSPF-MIB.

Indexes

No indexes recorded

Column	Syntax	OID
agentOspfv3IfIpMtuIgnoreFlag Configures the IP MTU Ignore Flag value for this OSPF interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7244.2.30.3.9.1.2
agentOspfv3IfPassiveMode Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7244.2.30.3.9.1.3

The OSPF Process's Link State Database.

agentOspfv3LsdbEntry row .1.3.6.1.4.1.7244.2.30.3.10.1

A single Link State Advertisement.

Indexes

agentOspfv3LsdbAreaId agentOspfv3LsdbType agentOspfv3LsdbLsid agentOspfv3LsdbRouterId

Column	Syntax	OID
agentOspfv3LsdbAreaId The 32 bit identifier of the Area from which the LSA was received.	OSPF-MIBAreaID	.1.3.6.1.4.1.7244.2.30.3.10.1.1
agentOspfv3LsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format.	Enumeration Enumerated Values: 0 illegalLSA 1 routerLink 2 networkLink 3 interNetwork 4 interRouter 5 asExternal 6 multicastGroup 7 nssaExternal 8 link 9 intraPrefix 10 unknownLink 11 unknownArea	.1.3.6.1.4.1.7244.2.30.3.10.1.2
agentOspfv3LsdbLsid The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7244.2.30.3.10.1.3
agentOspfv3LsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.7244.2.30.3.10.1.4
agentOspfv3LsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.3.10.1.5
agentOspfv3LsdbAge This field is the age of the link state adver- tisement in seconds.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.7244.2.30.3.10.1.6
agentOspfv3LsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.3.10.1.7
agentOspfv3LsdbAdvertisement The entire Link State Advertisement, including its header.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.7244.2.30.3.10.1.8

The OSPF Process's AS-scope LSA Link State Database. 
The Database contains the AS-scope Link State 
Advertisements from throughout the areas that 
the device is attached to. 
          
This table is identical to the OSPF LSDB Table 
in format, but contains only AS-scope Link State 
Advertisements.  The purpose is to allow AS-scope 
LSAs to be displayed once for the router rather 
than once in each non-stub area.

agentOspfv3AsLsdbEntry row .1.3.6.1.4.1.7244.2.30.3.18.1

A single Link State Advertisement.

Indexes

agentOspfv3AsLsdbType agentOspfv3AsLsdbLsid agentOspfv3AsLsdbRouterId

Column	Syntax	OID
agentOspfv3AsLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format.	Enumeration Enumerated Values: 0 illegalLSA 1 routerLink 2 networkLink 3 interNetwork 4 interRouter 5 asExternal 6 multicastGroup 7 nssaExternal 8 link 9 intraPrefix 10 unknownLink 11 unknownArea	.1.3.6.1.4.1.7244.2.30.3.18.1.1
agentOspfv3AsLsdbLsid The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.7244.2.30.3.18.1.2
agentOspfv3AsLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.7244.2.30.3.18.1.3
agentOspfv3AsLsdbSequence The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to det…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7244.2.30.3.18.1.4
agentOspfv3AsLsdbAge This field is the age of the link state adver- tisement in seconds.	secondsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.7244.2.30.3.18.1.5
agentOspfv3AsLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The check…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.7244.2.30.3.18.1.6
agentOspfv3AsLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.7244.2.30.3.18.1.7