ROHC-RTP-MIB

        This MIB module defines a set of objects for monitoring
and configuring RObust Header Compression (ROHC).
The objects are specific to ROHC RTP (profile 0x0001),
ROHC UDP (profile 0x0002), and ROHC ESP (profile 0x0003)
defined in RFC 3095 and for the ROHC LLA profile (profile
0x0005) defined in RFC 3242.
        
Copyright (C) The Internet Society (2004). The
initial version of this MIB module was published
in RFC 3816. For full legal notices see the RFC
itself or see:
http://www.ietf.org/copyrights/ianamib.html
    
Source file
ROHC-RTP-MIB
Last revised
Identity
rohcRtpMIB
Base OID
1.3.6.1.2.1.114
Imported Objects
ROHC-MIB rohcChannelID rohcContextCID
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC TruthValue
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ROHC-RTP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ROHC-RTP-MIB::rohcRtpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ROHC-RTP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ROHC-RTP-MIB::rohcRtpMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (28)
.1.3.6.1.2.1.114
.1.3.6.1.2.1.114.1
.1.3.6.1.2.1.114.1.1
.1.3.6.1.2.1.114.1.1.1
.1.3.6.1.2.1.114.1.1.1.10
.1.3.6.1.2.1.114.1.1.1.11
.1.3.6.1.2.1.114.1.1.1.12
.1.3.6.1.2.1.114.1.1.1.13
.1.3.6.1.2.1.114.1.1.1.14
.1.3.6.1.2.1.114.1.1.1.15
.1.3.6.1.2.1.114.1.1.1.16
.1.3.6.1.2.1.114.1.1.1.17
Enumeration
.1.3.6.1.2.1.114.1.1.1.3
Enumeration
.1.3.6.1.2.1.114.1.1.1.4
.1.3.6.1.2.1.114.1.1.1.5
.1.3.6.1.2.1.114.1.1.1.6
.1.3.6.1.2.1.114.1.1.1.7
Unsigned32
.1.3.6.1.2.1.114.1.1.1.8
Unsigned32
.1.3.6.1.2.1.114.1.1.1.9
.1.3.6.1.2.1.114.1.2
.1.3.6.1.2.1.114.1.2.1
Unsigned32
.1.3.6.1.2.1.114.1.2.1.3
.1.3.6.1.2.1.114.1.2.1.4
.1.3.6.1.2.1.114.1.2.1.5
Enumeration
.1.3.6.1.2.1.114.1.2.1.6
.1.3.6.1.2.1.114.2
.1.3.6.1.2.1.114.2.1
.1.3.6.1.2.1.114.2.2
Dependencies (8) 4 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. SNMP-FRAMEWORK-MIBrfc
  8. ROHC-MIBrfc
  9. ROHC-RTP-MIBrfcselected
Conformance Groups (3)
A collection of objects providing information about
ROHC RTP compressors and decompressors.
.1.3.6.1.2.1.114.2.2.1
A collection of objects providing information about
allowed and used packet sizes at a ROHC RTP compressor.
.1.3.6.1.2.1.114.2.2.2
A collection of objects providing ROHC compressor and
decompressor statistics.
.1.3.6.1.2.1.114.2.2.3
Compliance Statements (1)

OID .1.3.6.1.2.1.114.2.1.1
The compliance statement for SNMP entities that implement
the ROHC-RTP-MIB.

Note that compliance with this compliance
statement requires compliance with the
rohcCompliance MODULE-COMPLIANCE statement of the
ROHC-MIB and with the ifCompliance3 MODULE-COMPLIANCE
statement of the IF-MIB (RFC2863).
Required groups
mandatory rohcRtpContextGroup
optional rohcRtpPacketSizesGroup A compliant implementation does not have to implement
the rohcRtpPacketSizesGroup.
optional rohcRtpStatisticsGroup A compliant implementation does not have to implement
the rohcRtpStatisticsGroup.