RNX-UPDU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
34

upduModuleTable

table
.1.3.6.1.4.1.55108.1.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the bachmann variant from /opt/observium/mibs/bachmann.
Command help
Walk upduModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RNX-UPDU-MIB' -M '/opt/observium/mibs/bachmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RNX-UPDU-MIB::upduModuleTable' 
A list of module entries.
upduModuleEntry row .1.3.6.1.4.1.55108.1.2.1.1
An entry containing information for a particular module.
Indexes
Column Syntax OID
upduModuleIndex
Module index.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.55108.1.2.1.1.1
upduModuleType
Module type: tells what type of module it is.
Enumeration
Enumerated Values:
0unknown
1icm
2meterModule
 .1.3.6.1.4.1.55108.1.2.1.1.2
upduModulePartNumber
Part number
OctetString .1.3.6.1.4.1.55108.1.2.1.1.3
upduModuleSerialNumber
Module serial number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.55108.1.2.1.1.4
upduModuleLotNumber
Module lot number.
OctetString .1.3.6.1.4.1.55108.1.2.1.1.5

upduMeterTable

table
.1.3.6.1.4.1.55108.1.3.1 · 1 row entry · 14 columns
Open in standard view
Uses the bachmann variant from /opt/observium/mibs/bachmann.
Command help
Walk upduMeterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RNX-UPDU-MIB' -M '/opt/observium/mibs/bachmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RNX-UPDU-MIB::upduMeterTable' 
Holds information about each Power module.
upduMeterEntry row .1.3.6.1.4.1.55108.1.3.1.1
An entry provides a power data
Indexes
Column Syntax OID
upduMeterIndex
Number of the meter on the Module.
Integer32
Constraints:
range: 0-11
 .1.3.6.1.4.1.55108.1.3.1.1.1
upduMeterName
Meter name.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.55108.1.3.1.1.2
upduMeterType
Meter type: Tell if the meter is per-phase, per PDU,
per module or for a single outlet or outlet group. For
pduTotalCalc, phaseTotalCalc, moduleTotalCalc, the
total is calculated (sum of the measurements of the
underlyi…
Enumeration
Enumerated Values:
0pduTotal
1pduTotalCalc
2phaseTotal
3phaseTotalCalc
4moduleTotal
5moduleTotalCalc
6outlet
7outletGroup
 .1.3.6.1.4.1.55108.1.3.1.1.3
upduMeterEnergyP
Positive active energy in watt hours.
WhWattHours .1.3.6.1.4.1.55108.1.3.1.1.4
upduMeterEnergyR1
Reactive energy from quadrant R1 in volt-ampere reactives hours.
varhVoltAmpereReactiveHours .1.3.6.1.4.1.55108.1.3.1.1.5
upduMeterEnergyR4
Reactive energy from quadrant R4 in volt-ampere reactives hours.
varhVoltAmpereReactiveHours .1.3.6.1.4.1.55108.1.3.1.1.6
upduMeterPowerP
Active power at a given instant.
WWatts .1.3.6.1.4.1.55108.1.3.1.1.7
upduMeterPowerQ
Reactive power at a given instant.
varVoltAmpereReactives .1.3.6.1.4.1.55108.1.3.1.1.8
upduMeterPowerS
Apparent power at a given instant.
VAVoltAmperes .1.3.6.1.4.1.55108.1.3.1.1.9
upduMeterUrms
RMS voltage at a given instant.
mVMilliVolts .1.3.6.1.4.1.55108.1.3.1.1.10
upduMeterIrms
RMS current at a given instant.
mAMilliAmperes .1.3.6.1.4.1.55108.1.3.1.1.11
upduMeterSystemName
System-defined object name.
OctetString .1.3.6.1.4.1.55108.1.3.1.1.12
upduMeterCustomName
User-configured unique object name. Write access has to be
explicitly enabled in the UPDU configuration (see SNMP
options).
OctetStringr/w
Constraints:
range: 0-23
 .1.3.6.1.4.1.55108.1.3.1.1.13
upduMeterDescription
User-configured description. Write access has to be
explicitly enabled in the UPDU configuration (see SNMP
options).
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.55108.1.3.1.1.14

upduSensorTable

table
.1.3.6.1.4.1.55108.1.3.2 · 1 row entry · 5 columns
Open in standard view
Uses the bachmann variant from /opt/observium/mibs/bachmann.
Command help
Walk upduSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RNX-UPDU-MIB' -M '/opt/observium/mibs/bachmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RNX-UPDU-MIB::upduSensorTable' 
Holds information about sensors connected to the PDU.
upduSensorEntry row .1.3.6.1.4.1.55108.1.3.2.1
Holds the information related to one specific sensor.
Indexes
Column Syntax OID
upduSensorPort
Sensor port number.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.55108.1.3.2.1.1
upduSensorPortName
Sensor port name as printed on the front plate.
OctetString .1.3.6.1.4.1.55108.1.3.2.1.2
upduSensorType
Sensor type.
Enumeration
Enumerated Values:
0none
1temp
2tempHumidity
 .1.3.6.1.4.1.55108.1.3.2.1.3
upduSensorTemperatureCelsius
Temperature in tenth degrees.
deg-C/10TenthDegreesCelsius .1.3.6.1.4.1.55108.1.3.2.1.4
upduSensorHumidity
Relative humidity in per mil. Set to 0 for temperature only sensor.
/1000Permil .1.3.6.1.4.1.55108.1.3.2.1.5

upduRcmTable

table
.1.3.6.1.4.1.55108.1.3.3 · 1 row entry · 5 columns
Open in standard view
Uses the bachmann variant from /opt/observium/mibs/bachmann.
Command help
Walk upduRcmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RNX-UPDU-MIB' -M '/opt/observium/mibs/bachmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RNX-UPDU-MIB::upduRcmTable' 
Holds information about embedded residual current monitors.
upduRcmEntry row .1.3.6.1.4.1.55108.1.3.3.1
An entry provides Residual current data
Indexes
Column Syntax OID
upduRcmIndex
RCM index.
Integer32
Constraints:
range: 0-11
 .1.3.6.1.4.1.55108.1.3.3.1.1
upduRcmName
RCM name.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.55108.1.3.3.1.2
upduRcmCurrentRms
RMS residual current.
mA/10TenthMilliAmperes .1.3.6.1.4.1.55108.1.3.3.1.3
upduRcmCurrentDc
DC residual current.
mA/10TenthMilliAmperes .1.3.6.1.4.1.55108.1.3.3.1.4
upduRcmSensorQuality
RCM sensor health
Enumeration
Enumerated Values:
0ok
1nodata
2timeout
3internalerror
4selftestfailed
 .1.3.6.1.4.1.55108.1.3.3.1.5

upduRelayTable

table
.1.3.6.1.4.1.55108.1.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the bachmann variant from /opt/observium/mibs/bachmann.
Command help
Walk upduRelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RNX-UPDU-MIB' -M '/opt/observium/mibs/bachmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RNX-UPDU-MIB::upduRelayTable' 
Holds Relay state.
upduRelayEntry row .1.3.6.1.4.1.55108.1.4.1.1
An entry provides the status for a relay.
Indexes
Column Syntax OID
upduRelayIndex
Relay index.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.55108.1.4.1.1.1
upduRelayMeterNames
Comma-separated list of meter names this relay controls.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.55108.1.4.1.1.2
upduRelayAdminStatus
Defines the desired state of the relay.
Enumerationr/w
Enumerated Values:
0off
1on
2unknown
 .1.3.6.1.4.1.55108.1.4.1.1.3
upduRelayOperStatus
Defines the operational state of the relay.
Enumeration
Enumerated Values:
0off
1on
2unknown
 .1.3.6.1.4.1.55108.1.4.1.1.4
upduRelayCondition
Gives the relay condition. Ok if the desired state
corresponds to the operational state, failed if it
differs and unknown if the operational state is not
known.
Enumeration
Enumerated Values:
0ok
1failed
2unknown
 .1.3.6.1.4.1.55108.1.4.1.1.5