REDLINE-BS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
16

redlineBsPowerSupplyTable

table
.1.3.6.1.4.1.10728.2.1.2.10.1 · 1 row entry · 4 columns
Open in standard view
Uses the redline variant from /opt/observium/mibs/redline.
Command help
Walk redlineBsPowerSupplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'REDLINE-BS-MIB' -M '/opt/observium/mibs/redline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'REDLINE-BS-MIB::redlineBsPowerSupplyTable' 
This table contains identification and status information about 
base station power supplies. A trap will be generated each time 
the power supply goes on or off. The traps generation can be 
enabled/disabled using Redline Trap Activation Table.
redlineBsPowerSupplyEntry row .1.3.6.1.4.1.10728.2.1.2.10.1.1
This entry contains status information about base station power
supply.
Indexes
Column Syntax OID
redlineBsPowerSupplyIndex
The index of the BS power supply table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.1.2.10.1.1.1
redlineBsPowerSupplyName
Textual identification of base station power supply.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.10728.2.1.2.10.1.1.2
redlineBsPowerSupplyType
The power supply type.
Enumeration
Enumerated Values:
1internal
2external
3externalShared
 .1.3.6.1.4.1.10728.2.1.2.10.1.1.3
redlineBsPowerSupplyStatus
Indicates if the power supply is on/off.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.10728.2.1.2.10.1.1.4

redlineBsTemperatureTable

table
.1.3.6.1.4.1.10728.2.1.2.10.2 · 1 row entry · 4 columns
Open in standard view
Uses the redline variant from /opt/observium/mibs/redline.
Command help
Walk redlineBsTemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'REDLINE-BS-MIB' -M '/opt/observium/mibs/redline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'REDLINE-BS-MIB::redlineBsTemperatureTable' 
This table contains information about current temperature of
base station hardware units.
redlineBsTemperatureEntry row .1.3.6.1.4.1.10728.2.1.2.10.2.1
This entry contains temperature information about single base
station hardware unit.
Indexes
Column Syntax OID
redlineBsUnitIndex
The index of the BS current temperature table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.1.2.10.2.1.1
redlineBsUnitName
The base station hardware unit name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.10728.2.1.2.10.2.1.2
redlineBsUnitType
The base station hardware unit type.
Enumeration
Enumerated Values:
1indoor
2outdoor
 .1.3.6.1.4.1.10728.2.1.2.10.2.1.3
redlineBsCurrTemperature
Indicates the current temperature of base station hardware
unit in Celsius.
degrees CelsiusInteger32
Constraints:
range: -60-100
 .1.3.6.1.4.1.10728.2.1.2.10.2.1.4

redlineBsTempThresholdTable

table
.1.3.6.1.4.1.10728.2.1.2.10.3 · 1 row entry · 5 columns
Open in standard view
Uses the redline variant from /opt/observium/mibs/redline.
Command help
Walk redlineBsTempThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'REDLINE-BS-MIB' -M '/opt/observium/mibs/redline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'REDLINE-BS-MIB::redlineBsTempThresholdTable' 
This table contains various temperature threshold which are
used to trigger traps to alarm network manager about unit
 mulfunction.  The table is indexed by 'redlineBsUnitIndex' and
'redlineBsTempThresholdIndex' objects. Some of the traps 
require clearing after the temperature is going back to normal.
The traps can be enabled/disabled using Redline Trap Activation
table.
redlineBsTempThresholdEntry row .1.3.6.1.4.1.10728.2.1.2.10.3.1
This entry contains single base station hardware unit
temperarure threshold information.
Indexes
Column Syntax OID
redlineBsTempThresholdIndex
The index of the temperature threshold table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.1.2.10.3.1.1
redlineBsTempTrapThreshold
Indicates the temperature threshold value which will be used
to trigger a trap.
degrees CelsiusInteger32
Constraints:
range: -60-100
 .1.3.6.1.4.1.10728.2.1.2.10.3.1.2
redlineBsTempTrapClrThreshold
Indicates the temperature threshold value which will be used
to clear a previosly generated trap.
degrees CelsiusInteger32
Constraints:
range: -60-100
 .1.3.6.1.4.1.10728.2.1.2.10.3.1.3
redlineBsTempThresholdName
Textual identification of temperature threshold.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.10728.2.1.2.10.3.1.4
redlineBsTemperatureTrapTrigger
Indicates if temperature traversal in upper or lower
value direction is causing the trap.
Enumeration
Enumerated Values:
1temperatureRising
2temperatureFalling
 .1.3.6.1.4.1.10728.2.1.2.10.3.1.5

redlineBsFanTable

table
.1.3.6.1.4.1.10728.2.1.2.10.4 · 1 row entry · 3 columns
Open in standard view
Uses the redline variant from /opt/observium/mibs/redline.
Command help
Walk redlineBsFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'REDLINE-BS-MIB' -M '/opt/observium/mibs/redline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'REDLINE-BS-MIB::redlineBsFanTable' 
This table contains name and status information about 
base station cooling fans. Up to 3 entries are supported.
redlineBsFanEntry row .1.3.6.1.4.1.10728.2.1.2.10.4.1
This entry contains information about single cooling fan.
Indexes
Column Syntax OID
redlineBsFanIndex
The index of the colling fans table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.1.2.10.4.1.1
redlineBsFanName
Textual identification of base station fan.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.10728.2.1.2.10.4.1.2
redlineBsFanStatus
Indicates the base station fan is on/off.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.10728.2.1.2.10.4.1.3