REDLINE-AN50-PMP-V1-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
40

an50pmpLinkTable

table mandatory
.1.3.6.1.4.1.10728.2.51.1 · 1 row entry · 14 columns
Open in standard view
Uses the redline variant from /opt/observium/mibs/redline.
Command help
Walk an50pmpLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'REDLINE-AN50-PMP-V1-MIB' -M '/opt/observium/mibs/redline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'REDLINE-AN50-PMP-V1-MIB::an50pmpLinkTable' 
Table with Wireless links and connections
information configured into AN50 PMP device
based on V1 processor.
an50pmpLinkEntry row .1.3.6.1.4.1.10728.2.51.1.1
A unique set of link parameters.
Indexes
Column Syntax OID
an50pmpLinkIDmandatory
Link ID, a unique number between 1 and 1024 that
identifies a particular link.
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.10728.2.51.1.1.1
an50pmpLinkNamemandatory
The name of the Link/Connection
OctetStringr/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.10728.2.51.1.1.2
an50pmpLinkGroupIDmandatory
Group assigned to this link.
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.10728.2.51.1.1.3
an50pmpLinkPeerMacmandatory
Link Destination MAC address.
OctetStringr/w .1.3.6.1.4.1.10728.2.51.1.1.4
an50pmpLinkMaxDLBurstRatemandatory
Maximum downlink rate for this link.
Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4,
24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.10728.2.51.1.1.5
an50pmpLinkMaxULBurstRatemandatory
Maximum uplink rate for this link.
Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4,
24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.10728.2.51.1.1.6
an50pmpLinkMaxHostmandatory
Maximum number of hosts for this link.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.1.1.7
an50pmpLinkCIDDLCIRmandatory
The downlink commited rate for this connection in kb/s.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10728.2.51.1.1.8
an50pmpLinkCIDDLPIRmandatory
The downlink peak rate for this connection in kb/s.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10728.2.51.1.1.9
an50pmpLinkCIDULCIRmandatory
The uplink commited rate for this connection in kb/s.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10728.2.51.1.1.10
an50pmpLinkCIDULPIRmandatory
The uplink peak rate for this connection in kb/s.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10728.2.51.1.1.11
an50pmpLinkDLQoSmandatory
The downlink QoS level.
Integer32r/w
Constraints:
range: 1-54
 .1.3.6.1.4.1.10728.2.51.1.1.12
an50pmpLinkULQoSmandatory
The uplink QoS level.
Integer32r/w
Constraints:
range: 1-54
 .1.3.6.1.4.1.10728.2.51.1.1.13
an50pmpLinkRowStatusmandatory
Status of the row
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10728.2.51.1.1.14

an50pmpLinkStatusTable

table mandatory
.1.3.6.1.4.1.10728.2.51.2 · 1 row entry · 26 columns
Open in standard view
Uses the redline variant from /opt/observium/mibs/redline.
Command help
Walk an50pmpLinkStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'REDLINE-AN50-PMP-V1-MIB' -M '/opt/observium/mibs/redline:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'REDLINE-AN50-PMP-V1-MIB::an50pmpLinkStatusTable' 
Statistics per uplink connections.
an50pmpLinkStatusEntry row .1.3.6.1.4.1.10728.2.51.2.1
Statistics for a link connection.
Indexes
Column Syntax OID
an50pmpLinkStatusIDmandatory
Index for an50pmpLinkStatusTable table
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.10728.2.51.2.1.1
an50pmpLinkStatusmandatory
Status of the Link.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.10728.2.51.2.1.2
an50pmpLinkStatusCodemandatory
Alarm bits shown as a hex number.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.3
an50pmpLinkRegConnmandatory
Number of connections configured for this link.
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.10728.2.51.2.1.4
an50pmpLinkDLBurstRatemandatory
Current master Tx burst rate.
Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4,
24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.10728.2.51.2.1.5
an50pmpLinkDLRSSImandatory
RSSI (Received Signal Strength Indicator) at slave.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.6
an50pmpLinkDLSINADRmandatory
SINADR (Signal Interference and Noise Distorsion Ratio) at slave.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.7
an50pmpLinkDLStatLostFrmmandatory
SINADR at slave.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.8
an50pmpLinkDLStatBlksTotmandatory
Blocks transmitted from master to slave.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.9
an50pmpLinkDLStatBlksRetrmandatory
Block re-transmitted from master to slave.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.10
an50pmpLinkDLStatBlksDiscmandatory
Blocks lost from master to slave
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.11
an50pmpLinkDLCIDStatPktDiscmandatory
Packets discarded by master due to buffer full.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.12
an50pmpLinkDLCIDStatPktTranmandatory
Packets transmitted from master to slave.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.13
an50pmpLinkDLCIDStatPktRecvmandatory
Packets received by slave
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.14
an50pmpLinkULBurstRatemandatory
Current Slave Tx Burst Rate.
Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4,
24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.10728.2.51.2.1.15
an50pmpLinkULRSSImandatory
RSSI at master.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.16
an50pmpLinkULSINADRmandatory
SINADR at master.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.17
an50pmpLinkULStatLostFrmmandatory
Frames lost from slave to master
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.18
an50pmpLinkULStatBlksTotmandatory
Blocks transmitted slave to master.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.19
an50pmpLinkULStatBlksRetrmandatory
Block re-transmitted slave to master.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.20
an50pmpLinkULStatBlksDiscmandatory
Blocks lost from slave to master.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.21
an50pmpLinkULCIDStatPktDiscmandatory
Packets discarded by slave due to buffer full.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.22
an50pmpLinkULCIDStatPktTranmandatory
Packets transmitted from slave to master.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.23
an50pmpLinkULCIDStatPktRecvmandatory
Packets received by master from slave.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.24
an50pmpLinkUpTimemandatory
Time since the link is UP (in hundreth a of second).
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10728.2.51.2.1.25
an50pmpLinkLostCountmandatory
Number of times the link has been lost.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10728.2.51.2.1.26