RC-SLPP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
18

rcSlppVlanTable

table
.1.3.6.1.4.1.2272.1.64.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcSlppVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-SLPP-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-SLPP-MIB::rcSlppVlanTable' 
Table of VLANs for which simple loop detection occur on.
rcSlppVlanEntry row .1.3.6.1.4.1.2272.1.64.1.1.2.1
SLPP VLAN entry.
Indexes
Column Syntax OID
rcSlppVlanVlanId
Vlan id for which simple loop detection occurs on.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2272.1.64.1.1.2.1.1
rcSlppVlanSlppEnable
Flag to indicate whether the VLAN entry is active or not for SLPP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.64.1.1.2.1.2
rcSlppVlanRowStatus
Used to create/delete entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.64.1.1.2.1.3

rcSlppPortTable

table
.1.3.6.1.4.1.2272.1.64.1.1.3 · 1 row entry · 15 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcSlppPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-SLPP-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-SLPP-MIB::rcSlppPortTable' 
Table of ports for which simple loop detection occurs on.
rcSlppPortEntry row .1.3.6.1.4.1.2272.1.64.1.1.3.1
SLPP Port entry.
Indexes
Column Syntax OID
rcSlppPortIfIndex
Port on which simple loop detection occurs on.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.1
rcSlppPortPktRxThreshold
Once the number of SLPP packets received on this port reaches this threshold
action will be taken. Normally, the port will be shutdown.
Integer32r/w
Constraints:
range: 1-500
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.2
rcSlppPortSlppEnable
Flag to indicate whether the port entry is active or not for SLPP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.3
rcSlppPortRowStatus
Used to create/delete entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.4
rcSlppPortIncomingVlanId
Vlan id of the classified packet on the port brought down by
SLPP.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.5
rcSlppPortSrcNodeType
The src node type of the received slpp Pkt.
Enumeration
Enumerated Values:
0none
1local
2peer
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.6
rcSlppPortPktRxCount
Total number of SLPP packets received on the port
Integer32
Constraints:
range: 1-500
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.7
rcSlppPortGuardEnable
Flag to indicate if SLPP-guard is enabled on the port.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.8
rcSlppPortGuardTimeout
This value specifies the time period for which a port will remain
disabled. When SLPP-guard disables a port, after this time period
expires, the port will become re-enabled. A value of 0 means ports
will never be re-e…
Integer32r/w
Constraints:
range: 0-0
range: 10-65535
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.9
rcSlppPortGuardStatus
The object indicates the SLPP-guard status of a port.
Enumeration
Enumerated Values:
1none
2monitoring
3blocking
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.10
rcSlppPortGuardTimerCount
This value specifies the time period that has passed since
a port was administratively disabled by SLPP-guard. When this
object reaches the timeout value (rcSlppPortGuardTimeout),
the port will become re-enabled.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.11
rcSlppPortTimeToClrPktRxCount
Time to clear the SLPP Rx PDU counter. This has a
maximum value of 86400 seconds. The timer starts
when SLPP is enabled and port starts receiving SLPP
SLPP PDUs. When the time exceeds this configured value,
the SLPP …
secondsUnsigned32r/w
Constraints:
range: 1-86400
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.12
rcSlppPortRemainingTimeToClrPktRxCount
Remaining time to clear the SLPP Rx PDU counter.
secondsUnsigned32
Constraints:
range: 1-86400
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.13
rcSlppPortClearPktRxCount
Clear the SLPP Rx PDU counter.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.14
rcSlppPortGuardOrigin
Indicates how slpp guard was configured.
Supported values:
config - set by user
radius - set by radius atribute
Bits
Enumerated Values:
0config
1radius
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.15