RC-RIP-MIB Table View

IP Rip Interface table

rcIpRipInterfaceEntry row .1.3.6.1.4.1.2272.1.8.20.1.1

An entry of Ip Rip Interface Table.

Indexes

rcIpRipInterfaceAddress

Column	Syntax	OID
rcIpRipInterfaceAddress Ip Address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.20.1.1.1
rcIpRipInterfaceIfIndex Rip Interface If Index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.20.1.1.2
rcIpRipInterfaceRipEnable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.20.1.1.3
rcIpRipInterfaceAccDefRte	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.4
rcIpRipInterfaceAdvDefRte	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.5
rcIpRipInterfaceAutoAggregate	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.6
rcIpRipInterfaceCost	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.20.1.1.7
rcIpRipInterfaceListen	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.8
rcIpRipInterfacePoison	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.9
rcIpRipInterfaceSupply	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.10
rcIpRipInterfaceTriggeredUpdate	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.11
rcIpRipInterfaceInPolicy	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.20.1.1.12
rcIpRipInterfaceOutPolicy	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.8.20.1.1.13
rcIpRipInterfaceProxyAnnounceFlag	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.20.1.1.14
rcIpRipInterfaceHolddown Used to indicate the rip holddown timer for this interface	Integer32r/w Constraints: range: 0-360	.1.3.6.1.4.1.2272.1.8.20.1.1.15
rcIpRipInterfaceTimeout Used to indicate the rip timeout interval for this interface	Integer32r/w Constraints: range: 15-259200	.1.3.6.1.4.1.2272.1.8.20.1.1.16

RIP extension table.  This table augments the
standard IfConfTable table in RFC1389.

rcRipExtEntry row .1.3.6.1.4.1.2272.1.10.3.1

Entry containing Proprietary RIP information.
An entry is automatically created in this table
when an ip address is configured on an interface.

Indexes

rcRipExtEntIfIndex

Column	Syntax	OID
rcRipExtEntIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.10.3.1.1
rcRipExtEntTalk Enable or disable RIP transmission on the specified interface.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2272.1.10.3.1.2
rcRipExtEntListen Enable or disable RIP reception on the specified interface.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2272.1.10.3.1.3
rcRipExtEntPoison Enable or disable operation of poison reverse on the specified interface. If poison is disabled, split-horizon operation is enabled.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2272.1.10.3.1.4

IPv6 Ripng Interface table

rcIpv6RipngInterfaceEntry row .1.3.6.1.4.1.2272.1.10.5.1.2.1

An entry of IPv6 Ripng Interface Table.

Indexes

rcIpv6RipngInterfaceIfIndex

Column	Syntax	OID
rcIpv6RipngInterfaceIfIndex Ripng Interface Index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.10.5.1.2.1.1
rcIpv6RipngInterfaceRipAdminStatus Enable/Disable RIPng on interface	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.10.5.1.2.1.2
rcIpv6RipngInterfaceDefaultInfoState Origante default route under the particular interface	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.10.5.1.2.1.3
rcIpv6RipngInterfaceCost Used to specify the cost of RIPng metric	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.2272.1.10.5.1.2.1.4
rcIpv6RipngInterfacePoison Enable/Disable poison reverse on Ripng interface	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.10.5.1.2.1.5
rcIpv6RipngInterfaceRipOperStatus Enable/Disable RIPng Operational state on interface	RAPID-CITYEnableValue Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.10.5.1.2.1.6
rcIpv6RipngInterfaceRowStatus This variable controls the status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.10.5.1.2.1.7

A list of subnets which require separate
status monitoring in RIPng.

rcIpv6RipngIfStatsEntry row .1.3.6.1.4.1.2272.1.10.5.1.3.1

A Single Routing Domain in a single Subnet.

Indexes

rcIpv6RipngIfStatsIfIndex

Column	Syntax	OID
rcIpv6RipngIfStatsIfIndex The interface index of the RIPng interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.10.5.1.3.1.1
rcIpv6RipngIfStatsRcvBadPackets The number of RIPng response packets received by the RIPng process which were subsequently dis- carded for any reason (e.g. a version 0 packet, or an unknown command type).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.3.1.2
rcIpv6RipngIfStatsRcvBadRoutes The number of routes, in valid RIPng packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.3.1.3
rcIpv6RipngIfStatsSentUpdates The number of triggered RIPng updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.3.1.4
rcIpv6RipngIfStatsRcvUpdates The number of triggered RIPng updates actually receive on this interface. This explicitly does NOT include full updates received containing new information.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.3.1.5
rcIpv6RipngIfStatsClearStats Clear stats for RIpng interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.10.5.1.3.1.6

A list of RIPng routes kept when timeout expired 
until holddown timer expires too.

rcIpv6RipngExpRouteEntry row .1.3.6.1.4.1.2272.1.10.5.1.4.1

A Single expired RIPng route.

Indexes

rcIpv6RipngExpRouteDest rcIpv6RipngExpRoutePfxLength rcIpv6RipngExpRouteIndex

Column	Syntax	OID
rcIpv6RipngExpRouteDest The destination IPv6 address of this route. This object may not take a Multicast address value.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.10.5.1.4.1.1
rcIpv6RipngExpRoutePfxLength Indicates the prefix length of the destination address.	bitsInteger32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.10.5.1.4.1.2
rcIpv6RipngExpRouteIndex The value which uniquely identifies the route among the routes to the same network layer destination. The way this value is chosen is implementation specific but it must be unique for rcIpv6RipngExpRouteDest/rcIpv6Ripn…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.4.1.3
rcIpv6RipngExpRouteIfIndex Indicates the interface index where the route was learned from	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.10.5.1.4.1.4
rcIpv6RipngExpRouteNextHop Identifier of the next-hop, IPv6 address.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.10.5.1.4.1.5
rcIpv6RipngExpRouteType The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination. Routes that do no…	Enumeration Enumerated Values: 1 other 2 discard 3 local 4 remote 5 blackhole	.1.3.6.1.4.1.2272.1.10.5.1.4.1.6
rcIpv6RipngExpRouteProtocol The routing mechanism via which this route was learned.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 ndisc 5 rip 6 ospf 7 bgp 8 idrp 9 igrp	.1.3.6.1.4.1.2272.1.10.5.1.4.1.7
rcIpv6RipngExpRoutePolicy Its purpose is to serve as an additional index that may delineate between multiple entries to the same destination. The value { 0 } shall be used as the default value for this object.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.10.5.1.4.1.8
rcIpv6RipngExpRouteAge The number of seconds since this route was last updated or otherwise determined to be correct.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.4.1.9
rcIpv6RipngExpRouteNextHopRDI The Routing Domain ID of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's rcIpv6RipngExpRouteProtocol value. When this object is unknown or not relevant its v…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.4.1.10
rcIpv6RipngExpRouteMetric The routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's rcIpv6RipngExpRouteProtocol value. In this case, when this is unknown should be set to its …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.4.1.11
rcIpv6RipngExpRouteWeight The system internal weight value for this route. The semantics of this value are determined by the implementation specific rules. Generally, within routes with the same rcIpv6RipngExpRoutePolicy value, the lower the wei…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.10.5.1.4.1.12
rcIpv6RipngExpRouteInfo A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipv6RouteProto value. If this information is not pres…	ObjectIdentifier	.1.3.6.1.4.1.2272.1.10.5.1.4.1.13
rcIpv6RipngExpRouteValid Setting this object to the value 'false(2)' has the effect of invalidating the corresponding entry in the rcIpv6RipngExpRouteTable object. That is, it effectively disassociates the destination identified with said entry…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.10.5.1.4.1.14
rcIpv6RipngExpRoutePref Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IPv6 traffic, the route that has a lower preference will be used instead of a higher preference one. The…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.10.5.1.4.1.15