RC-PORT-MIB Table View

Port table

rcPortEntry row .1.3.6.1.4.1.2272.1.4.10.1.1

Entry containing info. for a particular port

Indexes

rcPortIndex

Column	Syntax	OID
rcPortIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.4.10.1.1.1
rcPortType Port type	Enumeration Enumerated Values: 0 other 1 rc100BaseTX 2 rc100BaseT2 3 rc100BaseF 4 rc1000BaseF 5 rc1000BaseDualF 6 rc10BaseF 7 rcPosMMF 8 rcPosSMF 9 rcAtm 10 rcGbicLx 11 rcGbicSx 12 rcGbicXd 13 rcGbicCu 14 rcGbicOther 15 rcOc3cSM 16 rcOc3cMM 17 rcOc3cCOPPER 18 rcOc12cSM 19 rcOc12cMM 20 rcDs3 21 rcE3 22 rcGbicNone 23 rc1000BaseT 24 rcGbicZx 25 rcOc3cAtmSM 26 rcOc3cAtmMM 27 rcOc12cAtmSM 28 rcOc12cAtmMM 29 rcOc3cPosSM 30 rcOc3cPosMM 31 rcOc12cPosSM 32 rcOc12cPosMM 33 rcGbic1470 34 rcGbic1490 35 rcGbic1510 36 rcGbic1530 37 rcGbic1550 38 rcGbic1570 39 rcGbic1590 40 rcGbic1610 41 rcRmon 42 rcGbic1470APD 43 rcGbic1490APD 44 rcGbic1510APD 45 rcGbic1530APD 46 rcGbic1550APD 47 rcGbic1570APD 48 rcGbic1590APD 49 rcGbic1610APD 50 rc10GbLW 51 rc10GbLR 52 rcLogicalServerPort 53 rc1000BaseTX 54 rc100BaseTXPOE 55 rcGbicBx 56 rc10GbNone 57 rc1000XFP 58 rc10GbSR 59 rc10GbSW 60 rc10GbER 61 rc10GbEW 62 rc10GbOther 63 rc1000BaseTXPOE 64 rc10GbZR 65 rc10GbZW 66 rcGbic1310Xd 67 rcGbic1470Xd 68 rcGbic1490Xd 69 rcGbic1510Xd 70 rcGbic1530Xd 71 rcGbic1550Xd 72 rcGbic1570Xd 73 rcGbic1590Xd 74 rcGbic1610Xd 75 rcGbic1470Zx 76 rcGbic1490Zx 77 rcGbic1510Zx 78 rcGbic1530Zx 79 rcGbic1550Zx 80 rcGbic1570Zx 81 rcGbic1590Zx 82 rcGbic1610Zx 83 rcGbic1690Zx 84 rcGbic1310Bx 85 rcGbic1490Bx 86 rcGbicEx 87 rcGbic850Sx 88 rcGbic1200Lx 89 rcGbic1300Lx 90 rcGbic1310Lx 91 rcGbic1490Lx 92 rcGbic1550Lx 93 rcGbic1550Ex 94 rc1GbFD 95 rc10GbLRM 96 rc10GbDWDMR 97 rc10GbDWDMW 98 rc100BaseSX 99 rc100BaseLX 100 rc100BaseFX 101 rc100BaseBX 102 rc100BaseZX 103 rcGbicMTRJ 104 rcGbic1300SeFx 105 rcGbicCX 106 rc10GbCX 107 rcSFPplus 108 rc10GBaseT 109 rc100BaseOther 110 rcUnknownSpeedOther 111 rc10GbERCWDM 112 rc10GbZRCWDM 113 rc10GbER1470 114 rc10GbER1490 115 rc10GbER1510 116 rc10GbER1530 117 rc10GbER1550 118 rc10GbER1570 119 rc10GbER1590 120 rc10GbER1610 121 rc10GbZR1470 122 rc10GbZR1490 123 rc10GbZR1510 124 rc10GbZR1530 125 rc10GbZR1550 126 rc10GbZR1570 127 rc10GbZR1590 128 rc10GbZR1610 129 rc40GbNone 130 rc40GbSR4 131 rc40GbLR4 132 rc40GbCR4 133 rc40GbOther 134 rcGbicDWDM180km 135 rc100BaseFxT1 136 rcUnsupported 137 rc40GbER 138 rc40GbNoneChannelized 139 rc40GbSR4Channelzied 140 rc40GbLR4Channelied 141 rc40GbCR4Channelized 142 rc40GbERChannelized 143 rc40GbOtherChannelized 144 rc40GbER4 145 rc40GbLM4 146 rc10GbBiDi 147 rc40GbCR4BoC 148 rc40GbAOBoC 149 rc10GbCXBoC 150 rc10GbAOBoC 151 rc40GbER4Channelized 152 rc40GbLM4Channelized 153 rc40GbCR4BoCChannelized 154 rc40GbAOBoCChannelized 155 rc40GbAOC 156 rc40GbAOCChannelized 157 rc100GbNone 158 rc100GbCR4 159 rc100GbSR4 160 rc100GbLR4 161 rc100GbAOC 162 rc100GbAOBoC 163 rc100GbCR4BoC 164 rc100GbOther 165 rc100GbER4 166 rc100GbNoneChannelized 167 rc100GbCR4Channelized 168 rc100GbSR4Channelized 169 rc100GbLR4Channelized 170 rc100GbER4Channelized 171 rc100GbAOCChannelized 172 rc100GbAOBoCChannelized 173 rc100GbCR4BoCChannelized 174 rc100GbOtherChannelized 175 rcGbic10GbCu 176 rc2500BaseT 177 rc40GbBiDiMMF 178 rc40GbLR4PSM 179 rc100GbCWDM4 180 rc40GbBiDiMMFChannelized 181 rc40GbLR4PSMChannelized 182 rc100GbCWDM4Channelized 183 rc25GbNone 184 rc25GbSR 185 rc25GbLR 186 rc25GbCX 187 rc25GbER 188 rc25GbAOC 189 rc25GbCXBoC 190 rc25GbAOBoC 191 rc10GbAOC 192 rc100GbSWDM4 193 rc100GbSWDM4Channelized 194 rc10GbInsight 195 rc100GbBiDi 196 rc100GbPSM4 197 rc100Gb4WDM10km 198 rc100Gb4WDM20km 199 rc100GbER4lite 200 rc100GbBiDiChannelized 201 rc100GbPSM4Channelized 202 rc100Gb4WDM10kmChannelized 203 rc100Gb4WDM20kmChannelized 204 rc100GbER4liteChannelized 205 rc100Gb4WDM40km 206 rc100Gb4WDM40kmChannelized 207 rc10GbBX10km1270 208 rc10GbBX10km1330 209 rc10GbBX40km1270 210 rc10GbBX40km1330 211 rc25GbESR 212 rc25GbSRLite 213 rc5GBaseT 214 rcGbicInsight	.1.3.6.1.4.1.2272.1.4.10.1.1.2
rcPortConnectorType Type of connector installed on this port.	Enumeration Enumerated Values: 1 nonRedundant 2 redundant	.1.3.6.1.4.1.2272.1.4.10.1.1.3
rcPortPerformRoutingdeprecated Indicate whether this port should perform routing	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.4
rcPortHighPrioritydeprecated Indicate whether this port should be treated with high priority	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.5
rcPortAction Port related actions.	Enumerationr/w Enumerated Values: 1 none 2 flushMacFdb 3 flushArp 4 flushIp 5 flushAll 6 triggerRipUpdate 7 clearLoopDetectAlarm	.1.3.6.1.4.1.2272.1.4.10.1.1.6
rcPortResult Result from the last Vlan action.	Enumeration Enumerated Values: 1 none 2 inProgress 3 success 4 fail	.1.3.6.1.4.1.2272.1.4.10.1.1.7
rcPortPrimaryConnector For ports configured with redundant connectors, this value is used to indicate which connector should be used as the 'active' connector on this port the next time the port is placed into the ifAdminStatus=Up.	Enumerationr/w Enumerated Values: 1 left 2 right 3 other	.1.3.6.1.4.1.2272.1.4.10.1.1.8
rcPortActiveConnector For ports configured with redundant connectors, this value is used to indicate which connector is currently the active one. Only one connector can be active an anytime.	Enumeration Enumerated Values: 1 left 2 right 3 other	.1.3.6.1.4.1.2272.1.4.10.1.1.9
rcPortBackupConnectorStatus Indicate the status of the link attached to the back-up (non-active) connector.	Enumeration Enumerated Values: 1 up 2 down 3 other	.1.3.6.1.4.1.2272.1.4.10.1.1.10
rcPortAutoNegotiate Indicate whether this port enabled for auto negotiations or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.11
rcPortAdminDuplex Indicates the port duplex type	Enumerationr/w Enumerated Values: 1 half 2 full	.1.3.6.1.4.1.2272.1.4.10.1.1.12
rcPortOperDuplex Indicate this port's current duplex value.	Enumeration Enumerated Values: 1 half 2 full	.1.3.6.1.4.1.2272.1.4.10.1.1.13
rcPortAdminSpeed Indicate this port's speed.	Enumerationr/w Enumerated Values: 0 none 1 mbps10 2 mbps100 3 mbps1000 4 mbps10000 5 mbps40000 6 mbps100000 7 mbps25000 8 mbps2500 9 mbps5000	.1.3.6.1.4.1.2272.1.4.10.1.1.14
rcPortOperSpeed Indicate this port's current speed value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.15
rcPortMltId Indicate which multi-link trunk (MLT) this port is assigned to. If this port is not associated with any MLT, this value will be set to zero(0).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.16
rcPortLocked Indicate whether this port is locked.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.17
rcPortAutoNegotiationSupported Indicate whether this port can support auto-negotiation.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.18
rcPortSingleRoutablePort Indicate whether this port is a single routable port. If this value is true, the port functions like a traditional router port.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.19
rcPortUnknownMacDiscard If rcUnknownMacDiscard is set to True, then a packet with an unknown source MAC address is dropped on that port, and other ports then will discard any packets with this MAC address in the destination field. For example,…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.20
rcPortNumStateTransition # state transitions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.10.1.1.21
rcPortUserPrioritydeprecated User priority level.	Enumerationr/w Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7	.1.3.6.1.4.1.2272.1.4.10.1.1.22
rcPortAllowOversizeFramedeprecated Used to specify whether over-size frames should be processed or dropped.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.23
rcPortQosLevel Used to specify the Qos level packets, carried on this port, should be processed with.	Enumerationr/w Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7	.1.3.6.1.4.1.2272.1.4.10.1.1.30
rcPortDiffServEnable Used to enable/disable the Differentiated Service feature on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.31
rcPortDiffServType Used to specify the Differentiated Service type for this port.	Enumerationr/w Enumerated Values: 0 none 1 access 2 core	.1.3.6.1.4.1.2272.1.4.10.1.1.32
rcPortDiffServIeee8021POverrideEnabledeprecated Used to enable/disable the Differentiated Service IEEE 802.1P over-ride feature.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.33
rcPortVendorDescr Used to show the name of the vendor of this port's connector. Only applicable to ports on a GBIC cards.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2272.1.4.10.1.1.34
rcPortName This port's name.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.4.10.1.1.35
rcPortOctapidIddeprecated The octapid id of the mirrored port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.36
rcPortWan Indicatie this port's current WAN/LAN mode. Valid for 10 GE only	Enumerationr/w Enumerated Values: 0 none 1 wan 2 lan	.1.3.6.1.4.1.2272.1.4.10.1.1.37
rcPortTransport Indicatie this port's current tranport layer. Valid for 10 GE only	Enumerationr/w Enumerated Values: 0 none 1 sonet 2 sdh	.1.3.6.1.4.1.2272.1.4.10.1.1.38
rcPortMultimediaFilterEnable Used to enable/disable the Telephony device selected on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.39
rcPortMultimediaDevSelection Used to set/get the selected Multimedia & Telephony Devices on this port. The String is the name of the device in the rcIpFilterMediaDevTable	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.4.10.1.1.40
rcPortServiceType Indicates the port functionality. 12uni is used to configure the port to be part of Martini service, tls is used to configure the port to be part of Any2Any VPN service and ip is used to perform the IP routing and mpls …	Enumerationr/w Enumerated Values: 0 none 1 l2uni 2 vpls 3 ip 4 serverl2uni	.1.3.6.1.4.1.2272.1.4.10.1.1.41
rcPortMode The port mode for l2uni service type.If the port is configured for l2uni service type, then the mode can be transparent or switched.	Enumerationr/w Enumerated Values: 0 none 1 transparent 2 switched	.1.3.6.1.4.1.2272.1.4.10.1.1.42
rcPortAdminRouting Indicate whether the port is routable.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.43
rcPortOperRouting The status of the port whether is routable.	RAPID-CITYEnableValue Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.44
rcPortPid The pid of the mirrored port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.45
rcPortIeee8021POverrideEnable Used to enable/disable IEEE 802.1P override. If it is enabled, 802.1p vlaue from a tagged frame may not honor.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.46
rcPortShaperEnable Used to enable/disable shaper on the port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.47
rcPortShaperMaxRate Shaping rate in mega bits per second. Note that actual shaping rate might be different from the configured rate due to the rate granularity of the shaper.	Integer32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.2272.1.4.10.1.1.48
rcPortShaperBurstSize Burst size in kilo bytes per second. Note that actual burst size might be different from the configured size due to the granularity of the shaper.	Integer32r/w Constraints: range: 4-16000	.1.3.6.1.4.1.2272.1.4.10.1.1.49
rcPortCpLimitShutDown A TRUE value indicates if CP Limit shut down the interface.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.50
rcPortHighSecureEnable Enable/Disable high secure.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.51
rcPortTlsPriorityOverride Enable/Disable tls port priority override feature.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.52
rcPortVctAbility If this object is TRUE, then the specified port is hardware-capable of doing the VCT test, if the rcPortAdminStatus is also true. If this object is FALSE, then the hardware cannot do the VCT test regardless of the setti…	Enumeration Enumerated Values: 1 vctNotCapable 2 vctCapable	.1.3.6.1.4.1.2272.1.4.10.1.1.53
rcPortVctAdminStatus Admin status for port VCT test. If this object is set to TRUE, then the VCT test can be performed. If it is set to FALSE, then the test cannot be performed, even if the port hardware is capable of doing it. If this vari…	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.54
rcPortMrouteStrLimit maximum number of multicast streams that are allowed to ingress to CPU through this port.	Integer32r/w Constraints: range: 1-32768	.1.3.6.1.4.1.2272.1.4.10.1.1.55
rcPortMrouteStrTimerCheck sampling period to check number of multicast streams that has ingressed CPU through this port.	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.2272.1.4.10.1.1.56
rcPortMrouteStrLimitEnable enable or disable mroute stream limit on port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.57
rcPortUpdateDynamicMacQosLevel It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a port-based vlan when port qos level changes. If it is set to TRUE, qos level for all dynamic learned mac addresses…	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.58
rcPortVplsDualHoming The VPLS dual homing is for VPLS service type only. It can be disable, firstNNI or secondNNI.	Enumerationr/w Enumerated Values: 0 disable 1 firstNNI 2 secondNNI	.1.3.6.1.4.1.2272.1.4.10.1.1.59
rcPortVplsMgmtVlan Management Vlan is configured on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.60
rcPortTlsManagedBySp True/False tls devices on port Managed By Service Provider.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.61
rcPortAutoNegAd This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex adv…	Bitsr/w Enumerated Values: 0 advertise10Half 1 advertise10Full 2 advertise100Half 3 advertise100Full 4 advertise1000Half 5 advertise1000Full 6 advertiseMacPause 7 advertiseAsymPause 8 advertiseNone 9 advertise10000Full 10 default 11 advertise2500Full 12 advertise5000Full	.1.3.6.1.4.1.2272.1.4.10.1.1.62
rcPortAutoNegAdCapability This object indicates the port speed and duplex capabilities that hardware can actually support on a port, and which may be advertised by the port using auto-negotiation. Bit 7 tells if a port supports pause frame capab…	Bits Enumerated Values: 0 advertise10Half 1 advertise10Full 2 advertise100Half 3 advertise100Full 4 advertise1000Half 5 advertise1000Full 6 advertiseMacPause 7 advertiseAsymPause	.1.3.6.1.4.1.2272.1.4.10.1.1.63
rcPortAutoRecoverPort enable or disable auto recovery of port from action taken by cp-limit, link flap or loop detect features	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.64
rcPortExtCplimitConf Indicates the port configuration for extended CP-LIMIT	Enumerationr/w Enumerated Values: 1 none 2 softDown 3 hardDown	.1.3.6.1.4.1.2272.1.4.10.1.1.65
rcPortExtCplimitUtilRate Threshold for Ingress traffic utilization rate of the port for extended CP-LIMIT	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.4.10.1.1.66
rcPortEgressRateLimit Egress Rate Limit. 0 means disabled.	Integer32r/w Constraints: range: 64-40000000 range: 0-0	.1.3.6.1.4.1.2272.1.4.10.1.1.67
rcPortEgressRateLimitState Used to enable/disable shape/egress-rate-limit functionality.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.68
rcPortBpduFilteringTimerCountobsolete The remaining time the port will be disabled due to a BPDU received when BPDU filtering is enabled.	Integer32 Constraints: range: 0-6553500	.1.3.6.1.4.1.2272.1.4.10.1.1.69
rcPortBpduFilteringTimeoutobsolete The time the port will be disabled when a BPDU is received when BPDU filtering is enabled.	Integer32r/w Constraints: range: 0-6553500	.1.3.6.1.4.1.2272.1.4.10.1.1.70
rcPortBpduFilteringAdminEnabledobsolete Used to enable/disable BPDU filtering.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.71
rcPortBpduFilteringOperEnabledobsolete Indicates whether BPDU filtering is actually enabled or disabled.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.72
rcPortQinqEtherType The qinq ether type value. It is hex value. It should be displayed and input as Hex value. It is only be used when port is associated with QnQ service UNI. Otherwise, it would be ignored	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.4.10.1.1.73
rcPortTrustDscp Used to enable/disable the trusted DSCP feature. If enabled, the internal qos-level and 802.1p value are derived from the received packet's DSCP value. This MIB object is applicable to ports in 8348GTX so that higher p…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.74
rcPortCpLimitEnable Used to enable/disable the control packet rate limit. Specifies whether or not rate limiting is currently in operation for multicast and broadcast packets for the specified port.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.75
rcPortCpMulticastLimit Used to limit Multicast traffic on the specified port. Sets the limit in packets per second.	Integer32r/w Constraints: range: 1000-100000	.1.3.6.1.4.1.2272.1.4.10.1.1.76
rcPortCpBroadcastLimit Used to limit Broadcast traffic on the specified port. Sets the limit in packets per second.	Integer32r/w Constraints: range: 1000-100000	.1.3.6.1.4.1.2272.1.4.10.1.1.77
rcPortSmartAutoNegotiate This object indicates whether 'smart' autonegotiation is enabled on a port (smart autonegotiation indicates that the port can sense whether its partner has autonegotiation enabled). This object, when supported, works i…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.78
rcPortMepList List of Meps assigned to this entry. A mep is consist of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.' A list of mep is consist of <md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,... Each mep is …	OctetStringr/w Constraints: range: 0-408	.1.3.6.1.4.1.2272.1.4.10.1.1.79
rcPortNumOfMep Used to indicate the number of Meps is assigned to this entry	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.10.1.1.80
rcPortAdacStatus If enabled, the Nortel IP phones connected to the port will be configured in the voice VLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.81
rcPortPvid A port Vlan Id associates with ESM and RModule port for OEL2/MIM traffic	Integer32r/w Constraints: range: 0-4093	.1.3.6.1.4.1.2272.1.4.10.1.1.82
rcPortTdp This attribute allows to Enable/Disable Transparent Domain Protocol at the port level on the ESM and Power Ranger Card. For the TDP packet to go out on the port, topology should be enabled both at the port and box level…	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.83
rcPortClockSource Indicates this port's current WAN clock source. Valid for 10 GE WAN only	Enumerationr/w Enumerated Values: 0 none 1 line 2 internal	.1.3.6.1.4.1.2272.1.4.10.1.1.84
rcPortIngressRateLimit Limits the amount of traffic from this Ingress port.	Integer32r/w Constraints: range: 1000-40000000 range: 0-0	.1.3.6.1.4.1.2272.1.4.10.1.1.85
rcPortIngressRateLimitState Used to enable/disable police/ingress-rate-limit functionality.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.86
rcPortVrfIdList The set of VRF ids to which this port belongs.	OctetString Constraints: range: 0-512	.1.3.6.1.4.1.2272.1.4.10.1.1.87
rcPortCfmVid CFM default port vid	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2272.1.4.10.1.1.88
rcPortUserLabel1 User provided field. Used to give extra management information/data	OctetStringr/w Constraints: range: 0-89	.1.3.6.1.4.1.2272.1.4.10.1.1.89
rcPortUserLabel2 User provided additional field. Used to give extra management information/data	OctetStringr/w Constraints: range: 0-89	.1.3.6.1.4.1.2272.1.4.10.1.1.90
rcPortClearCfmStats To clear the port counter	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.91
rcPortInterfaceType This value indicates whether a port is of type <normal/si lent/uni>. A port can be included in any EVPN service only if this attribute is set to uni. If the port is not part of any VLAN the interface-type is set to sile…	Enumerationr/w Enumerated Values: 1 normal 2 silent 3 uni	.1.3.6.1.4.1.2272.1.4.10.1.1.92
rcPortCfmControlMep MEP assigned for CFM Control. A mep consists of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.'	OctetStringr/w Constraints: range: 0-57	.1.3.6.1.4.1.2272.1.4.10.1.1.93
rcPortMtu Port Mtu	Integer32r/w Constraints: range: 1518-9600	.1.3.6.1.4.1.2272.1.4.10.1.1.94
rcPortMtuState Used to enable/disable Port Mtu functionality.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.95
rcPortVrfNameList The set of VRF names to which this port belongs.	OctetString	.1.3.6.1.4.1.2272.1.4.10.1.1.96
rcPortBrouterVrfId Gives the VRF Id for this Brouter port.	RC-VRF-MIBVrfIdentifierr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.10.1.1.97
rcPortBrouterVrfName Gives the VRF Name for this Brouter port.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.4.10.1.1.98
rcPortVrfCount The total number of VRFs this port is associated to.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.10.1.1.99
rcPortCtrlPktDropLimitEnable Used to enable/disable Control Packets Drop Rate Limiter functionality.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.100
rcPortCtrlPktDropLimit Indicates the Control Packet drop rate limit value	Integer32r/w Constraints: range: 20-1000 range: 0-0	.1.3.6.1.4.1.2272.1.4.10.1.1.101
rcPortCtrlPktShutdownLimitEnable Used to enable/disable Control Packets Shutdown Rate Limiter functionality.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.102
rcPortCtrlPktShutdownLimit Indicates the Control Packet shutdown rate Limit value	Integer32r/w Constraints: range: 20-1000 range: 0-0	.1.3.6.1.4.1.2272.1.4.10.1.1.103
rcPortCtrlPktShutdownRtExceeded Indicates if the Shutdown rate has been exceeded on the port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.104
rcPortCtrlPktDropRtExceeded Indicates if the Drop rate has been exceeded on the port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.105
rcPortDhcpOption82SubscriberId This object contains the DHCP option 82 subscriber ID string to be used in sub-option 6. If the value is an empty string, then sub-option 6 is not included in option 82	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.4.10.1.1.106
rcPortServiceCardType Port Hardware type, which includes PowerRanger, ESM port and other	Enumeration Enumerated Values: 1 esm8x1000Base 2 pr48x1000BaseTX 3 pr30x1000BaseSXBB 4 pr3x10GBaseGbic 5 pr3x10GBaseXZW 6 prPR48x1000BaseGBRS 7 prPR48x1000BaseGTRS 8 prPR12X10GBaseXLRS 9 prPR34xXGRS 10 prPR48x1000BaseGXRS 11 prPR30x1000BaseGBRS 12 prPR6X10GBaseXLRS 13 prPR26xXGRS 14 other	.1.3.6.1.4.1.2272.1.4.10.1.1.107
rcPortIngressRatePeak Peak rate limit for this port. 0 means disable.	Integer32r/w Constraints: range: 0-0 range: 64-40000000	.1.3.6.1.4.1.2272.1.4.10.1.1.108
rcPortIngressRateSvc Service rate limit for this port. 0 means disable.	Integer32r/w Constraints: range: 64-40000000 range: 0-0	.1.3.6.1.4.1.2272.1.4.10.1.1.109
rcPortCpLimitPktRate Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second.	Integer32r/w Constraints: range: 1000-20000	.1.3.6.1.4.1.2272.1.4.10.1.1.110
rcPortCpLimitShutDownEnable Used to indicate if the port should be shutdown when the CpLimitPktRate is exceeded.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.111
rcPortRmonEnable Used to set Remote Monitoring enable/disable	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.112
rcPortIpsecEnabledeprecated Used to set IPSEC enable/disable. at place of this value use RcIpConfEntry for IPV4 and use RcIpv6InterfaceEntry for IPV6. This field changed to deprecated	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.113
rcPortShutdownReason The port shutdown can happen due to many reason. It indicates the reason for the port state change.	Enumeration Enumerated Values: 1 none 2 cpLimit 3 macFlap 4 linkFlap 5 telnet 6 rLogin 7 console 8 ssh 9 modem 10 snmp 11 fdLimit 12 vlacp 13 slpp 14 smlt 15 lossless 16 invalidLossCfg 17 dpHeartBeat 18 ddmStatus 19 dupQsfpSerNum 20 bpduGuard 21 slppg 22 linkStateTracking 23 vlacpFlapDampening	.1.3.6.1.4.1.2272.1.4.10.1.1.114
rcPortMdixMode Defines the MDI crossover (MDIX) modes for the port	Enumerationr/w Enumerated Values: 1 auto 2 forceAuto 3 normal 4 xover	.1.3.6.1.4.1.2272.1.4.10.1.1.115
rcPortFlexUniEnable Used to set Flex UNI enable/disable on port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.116
rcPortBpduGuardTimerCount The remaining time the port will be disabled due to a BPDU received when BPDU guard is enabled.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.117
rcPortBpduGuardTimeout The time the port will be disabled when a BPDU is received when BPDU Guard is enabled.	secondsInteger32r/w Constraints: range: 10-65535 range: 0-0	.1.3.6.1.4.1.2272.1.4.10.1.1.118
rcPortBpduGuardAdminEnabled Used to enable/disable BPDU guard.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.119
rcPortLicenseControlStatus This object show the license conrol status of a port. It is only applicable to a port which reuqires PORT license file to be adminstratively enabled (ifAdminStatus). 'locked' means the port requires PORT …	Enumeration Enumerated Values: 1 locked 2 unlocked 3 notApplicable	.1.3.6.1.4.1.2272.1.4.10.1.1.120
rcPortTxFlowControl Used to enable/disable Tx flow control.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.121
rcPortTxFlowControlOperState Used to indicate the Tx flow control operational state.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.122
rcPortCarrierDelayEnable Used to enable/disable carrier delay feature on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.123
rcPortCarrierDelayInterval Used to configure the carrier delay interval in milliseconds on this port.	millisecondsInteger32r/w Constraints: range: 0-60000	.1.3.6.1.4.1.2272.1.4.10.1.1.124
rcPortForwardErrorCorrection Forward error correction	Enumerationr/w Enumerated Values: 1 cl91 2 cl108 3 cl74 4 disable 5 auto	.1.3.6.1.4.1.2272.1.4.10.1.1.125
rcPortForwardErrorCorrectionApplicability Object to inidcate the valid of object rcPortForwardErrorCorrection is applicable to this interface or not	Enumeration Enumerated Values: 1 applicable 2 notApplicable 3 cl91 4 cl108 5 cl74 6 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.126
rcPortMacsecMKAProfileName Associate the port to the MACSec mka profile	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.4.10.1.1.127
rcPortOperAutoNegotiate Indicate the operational state of auto negotiation.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.128
rcPortOperForwardErrorCorrection Indicate the operation value of Forward error correction. cl91 - when FEC is applicable, port is up and negotiated/admin config to CLAUSE91. cl108 - when FEC is applicable, port is up and negotiated/adm…	Enumeration Enumerated Values: 1 cl91 2 cl108 3 cl74 4 off 5 notApplicable 6 unknown	.1.3.6.1.4.1.2272.1.4.10.1.1.129
rcPortAutoSense Set the operation value of AutoSense configuration on port. disable - AutoSense is disabled. All configuration done by AutoSense (ZTF) will be erased/discarded. ena…	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2272.1.4.10.1.1.130
rcPortAutoSenseKeepAutoConfig When set to true, all port configuration made by ZTF will be kept if AutoSense is disabled on port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.131
rcPortCustomAutoNegAdOrigin Indicates how the Custom Auto Negotiation Advertisements were configured. Supported values: config - set by user radius - set by radius atribute	Bits Enumerated Values: 0 config 1 radius	.1.3.6.1.4.1.2272.1.4.10.1.1.132
rcPortBpduGuardOrigin Indicates how bpdu guard was configured. Supported values: config - set by user radius - set by radius atribute	Bits Enumerated Values: 0 config 1 radius	.1.3.6.1.4.1.2272.1.4.10.1.1.133
rcPortAutoSenseState The state of the auto-sense port, when auto-sense is enabled	Enumeration Enumerated Values: 1 noAutoSense 2 down 3 wait 4 uniOnboarding 5 nni 6 nniLoop 7 nniIsisUp 8 faProxyNoAuth 9 faWap 10 nniOnboading 11 voice 12 faProxy	.1.3.6.1.4.1.2272.1.4.10.1.1.134

Port pcap Table

rcPortPcapEntry row .1.3.6.1.4.1.2272.1.4.10.2.1

Entry containing pcap info. for a particular port

Indexes

rcPortPcapIndex

Column	Syntax	OID
rcPortPcapIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.4.10.2.1.1
rcPortPcapEnable To enable pcap for the port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.2.1.2
rcPortPcapMode Mode in which pcap is enabled	Enumerationr/w Enumerated Values: 1 tx 2 rx 3 both 4 rxFilter 5 txFilter 6 bothFilter	.1.3.6.1.4.1.2272.1.4.10.2.1.3
rcPortPcapFilterListSize Used to indicate the number of filter list(s) that are assigned to this port.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.4.10.2.1.4
rcPortPcapFilterList Used to indicate zero or more filter lists that are associated with this port for pcap. Each filter list identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zer…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.2272.1.4.10.2.1.5
rcPortPcapAclFilterListSize Used to indicate the number of ACL filter(s) that are assigned to this port which has mirror set as global-action.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.4.10.2.1.6
rcPortPcapAclFilterList Used to indicate zero or more ACL filter lists that are associated with this port for pcap (has mirror set as global-action). Each ACL filter list identifier is stored as two bytes in this array starting from offset ze…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.2272.1.4.10.2.1.7

Port table

rcPortPoePseIndexEntry row .1.3.6.1.4.1.2272.1.4.10.3.1.1

Entry containing info. for a particular port

Indexes

rcPortPoePseIndexIfIndex

Column	Syntax	OID
rcPortPoePseIndexIfIndex An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.4.10.3.1.1.1
rcPortPoePseIndexGroupIndex An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.4.10.3.1.1.2
rcPortPoePseIndexPortIndex This variable uniquely identifies the power Ethernet PSE port within group rcPoePseGroupIndex to which the power Ethernet PSE entry is connected.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.4.10.3.1.1.3

Port table

rcPortPoeMainPseExtnEntry row .1.3.6.1.4.1.2272.1.4.10.3.2.1

Entry containing info. for a particular port

Indexes

rcPortPoeMainPseExtnGroupIndex

Column	Syntax	OID
rcPortPoeMainPseExtnGroupIndex An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.4.10.3.2.1.1
rcPortPoeMainPseExtnPwrAdmin An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.3.2.1.2
rcPortPoeMainPseExtnPwrPriority An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	Enumerationr/w Enumerated Values: 1 critical 2 high 3 low	.1.3.6.1.4.1.2272.1.4.10.3.2.1.3
rcPortPoeMainPseExtnDeviceDetectType An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	Enumerationr/w Enumerated Values: 1 p802dot3af 2 p802dot3afAndLegacy	.1.3.6.1.4.1.2272.1.4.10.3.2.1.4
rcPortPoeMainPseExtnPwrLimit The maximum available PoE power of the main PSE expressed in Watts.	Integer32r/w Constraints: range: 37-800	.1.3.6.1.4.1.2272.1.4.10.3.2.1.5

Port table

rcPortPoePsePortExtnEntry row .1.3.6.1.4.1.2272.1.4.10.3.3.1

Entry containing info. for a particular port

Indexes

rcPortPoePsePortExtnGroupIndex rcPortPoePsePortExtnPortIndex

Column	Syntax	OID
rcPortPoePsePortExtnGroupIndex An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.4.10.3.3.1.1
rcPortPoePsePortExtnPortIndex An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.4.10.3.3.1.2
rcPortPoePsePortExtnPwrLimit An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	Integer32r/w Constraints: range: 3-16	.1.3.6.1.4.1.2272.1.4.10.3.3.1.3
rcPortPoePsePortExtnMeasuredVolt An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.3.3.1.4
rcPortPoePsePortExtnMeasuredCurrent An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.3.3.1.5
rcPortPoePsePortExtnPwrConsumpt An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the sam…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.3.3.1.6

Port LACP table

rcPortLacpEntry row .1.3.6.1.4.1.2272.1.4.10.4.1

Entry containing info. for a particular port

Indexes

rcPortIndex

Column	Syntax	OID
rcPortLacpAdminEnable Administratively enable/disable LACP on a port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.4.1.1
rcPortLacpOperEnable Indicates if LACP is operationally enabled or disabled on a port	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.4.1.2
rcPortLacpFastPeriodicTime The number of miliseconds between periodic transmissions using Short Timeouts.	Integer32r/w Constraints: range: 200-20000	.1.3.6.1.4.1.2272.1.4.10.4.1.3
rcPortLacpSlowPeriodicTime The number of miliseconds between periodic transmissions using LONG Timeouts.	Integer32r/w Constraints: range: 10000-30000	.1.3.6.1.4.1.2272.1.4.10.4.1.4
rcPortLacpTimeoutScale Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.4.10.4.1.5
rcPortLacpAggrWaitTime The number of mili seconds to delay aggregation to allow multiple links to aggregate simultaneously.	Integer32r/w Constraints: range: 200-2000	.1.3.6.1.4.1.2272.1.4.10.4.1.6
rcPortLacpFastPeriodicTimeOper The operating value of fast periodic timer on the port.	Integer32 Constraints: range: 10-20000	.1.3.6.1.4.1.2272.1.4.10.4.1.7
rcPortLacpSlowPeriodicTimeOper The operating value of slow periodic timer on the port.	Integer32 Constraints: range: 10-30000	.1.3.6.1.4.1.2272.1.4.10.4.1.8
rcPortLacpTimeoutScaleOper The operating value of timeout scale on the port.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.4.10.4.1.9
rcPortLacpAggrWaitTimeOper The operating value of aggreagate wait time on port.	Integer32 Constraints: range: 10-2000	.1.3.6.1.4.1.2272.1.4.10.4.1.10
rcPortLacpSuppressMisConfigLog Enable/Disable Suppression of misconfiguration logs.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.4.1.11

Port Virtual LACP table

rcPortVLacpEntry row .1.3.6.1.4.1.2272.1.4.10.5.1

Entry containing info. for a particular port

Indexes

rcPortIndex

Column	Syntax	OID
rcPortVLacpAdminEnable Administratively enable/disable Virtual LACP on a port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.1
rcPortVLacpOperEnable Indicates if Virtual LACP is operationally enabled or disabled on a port	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.2
rcPortVLacpFastPeriodicTimer The number of miliseconds between periodic transmissions using Short Timeouts	Integer32r/w Constraints: range: 200-20000	.1.3.6.1.4.1.2272.1.4.10.5.1.3
rcPortVLacpSlowPeriodicTimer The number of miliseconds between periodic transmissions using LONG Timeouts.	Integer32r/w Constraints: range: 10000-30000	.1.3.6.1.4.1.2272.1.4.10.5.1.4
rcPortVLacpTimeout Timeout control value. Long or Short Timeout	Enumerationr/w Enumerated Values: 1 short 2 long	.1.3.6.1.4.1.2272.1.4.10.5.1.5
rcPortVLacpTimeoutScale Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.4.10.5.1.6
rcPortVLacpEtherType VLACP Protocol Identification. The id value is in Hex	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.5.1.7
rcPortVLacpEtherMacAddress Multicast Mac Address exclusively used for VLACPDU's	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.5.1.8
rcPortVLacpPortState Display the Vlacp Port State.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.4.10.5.1.9
rcPortVLacpDualHomingEnable Enable/Disable Dual homing on Virtual LACP on a port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.10
rcPortVLacpFlapDetectEnable Administratively enable/disable VLACP flap detect on a port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.11
rcPortVLacpFlapFrequency The number of VLACP flaps on a port. If they occur within rcPortVLacpFlapInterval seconds, the port is shutdown.	Integer32r/w Constraints: range: 3-30	.1.3.6.1.4.1.2272.1.4.10.5.1.12
rcPortVLacpFlapInterval The time interval in seconds within which VLACP flaps on a port are monitored.	Integer32r/w Constraints: range: 10-600	.1.3.6.1.4.1.2272.1.4.10.5.1.13
rcPortVLacpTotalFlapCount The total number of VLACP flaps detected on this port since either enabling VLACP or clearing the counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.10.5.1.14
rcPortVLacpFirstFlapTimeStamp Timestamp for the first VLACP flap detected on this port since either enabling VLACP or clearing the timer.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.4.10.5.1.15
rcPortVLacpLastFlapTimeStamp Timestamp for the last VLACP flap detected on this port since either enabling VLACP or clearing the timer.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.4.10.5.1.16
rcPortVLacpFlapClearStats Clear VLACP Flap counters and timers.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.17

Port Remote Mirroring Table

rcPortRemoteMirroringEntry row .1.3.6.1.4.1.2272.1.4.10.6.1

Entry containing remote mirroring info. for a
particular port

Indexes

rcPortRemoteMirroringIndex

Column	Syntax	OID
rcPortRemoteMirroringIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.4.10.6.1.1
rcPortRemoteMirroringEnable To enable remote Mirroring for the port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.6.1.2
rcPortRemoteMirroringMode Mode in which remote mirroring is enabled	Enumerationr/w Enumerated Values: 1 source 2 termination	.1.3.6.1.4.1.2272.1.4.10.6.1.3
rcPortRemoteMirroringSrcMac Source Mac of the remote mirrored packet. Remote mirroring packet will be send with this source mac address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.6.1.4
rcPortRemoteMirroringDstMac Destination Mac of the remote mirrored packet. Packets will be bridged to this mac address. Remote mirroring packet will be send to this mac address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.6.1.5
rcPortRemoteMirroringEtherType Ethertype of the remote mirrored packet. Packets will be send with this ethertype	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.4.10.6.1.6
rcPortRemoteMirroringVlanIdListSize Used to indicate the number of VLAN IDs that are assigned to this port.	Integer32 Constraints: range: 0-2000	.1.3.6.1.4.1.2272.1.4.10.6.1.7
rcPortRemoteMirroringVlanIdList This field is used only if the port is assigned as remote mirroring termination port. Represents zero or more filter lists vlan in which the Destination Mac address resides. Each VLAN ID is stored as two bytes in this …	OctetStringr/w Constraints: range: 4096-4096	.1.3.6.1.4.1.2272.1.4.10.6.1.8
rcPortRemoteMirroringRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.4.10.6.1.9

A table used to maintain Vlacp session values.

rcPortVlacpSessionEntry row .1.3.6.1.4.1.2272.1.4.10.7.1

Entry containing Vlacp Session information
regarding a particular port or mlt.

Indexes

rcPortVlacpSessionIfIndex rcPortVlacpSessionSesNumber

Column	Syntax	OID
rcPortVlacpSessionIfIndex IfIndex of the port or Mlt	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.4.10.7.1.1
rcPortVlacpSessionSesNumber Session number of an IfIndex	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.4.10.7.1.2
rcPortVlacpSessionSrcMacAddress Mac Address for the session	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.7.1.3
rcPortVlacpSessionRxTimer The Rx timer for the session	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.7.1.4
rcPortVlacpSessionValidbit The valid bit for the session	Enumeration Enumerated Values: 0 inValidSession 1 validSession	.1.3.6.1.4.1.2272.1.4.10.7.1.5
rcPortVlacpSessionInPktCount The In packet count for the session	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.7.1.6

Port card mgmt port link table

rcPortMgmtLinkEntry row .1.3.6.1.4.1.2272.1.4.10.8.1

Entry containing info. for a particular mgmt port in I/O
card

Indexes

rcPortMgmtLinkIndex

Column	Syntax	OID
rcPortMgmtLinkIndex IfIndex of the port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.4.10.8.1.1
rcPortMgmtLinkDescr Port description	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.4.10.8.1.2
rcPortMgmtLinkOperStatus admin status of the mgmt port	Enumeration Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.2272.1.4.10.8.1.3
rcPortMgmtLinkAutoNegotiate Auto-negotiation status of the port	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.8.1.4
rcPortMgmtLinkDuplex duplex setting for the port	Enumeration Enumerated Values: 1 half 2 full	.1.3.6.1.4.1.2272.1.4.10.8.1.5
rcPortMgmtLinkSpeed speed setting for this port.	Enumeration Enumerated Values: 0 none 1 mbps10 2 mbps100 3 mbps1000	.1.3.6.1.4.1.2272.1.4.10.8.1.6

Port Flush Fdbtable

rcPortFlushFdbEntry row .1.3.6.1.4.1.2272.1.4.10.9.1

port based deletion of mac addresses
learned or discarded on that port

Indexes

rcPortIndex

Column	Syntax	OID
rcPortFlushFdbAddress Mac Address to be deleted.	OctetStringr/w Constraints: range: 17-17	.1.3.6.1.4.1.2272.1.4.10.9.1.1
rcPortFlushFdbVlanId vlan Id associated with the Mac Address	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.4.10.9.1.2

A list of RemotePortShutdown port info.

rcPortRemotePortShutdownEntry row .1.3.6.1.4.1.2272.1.4.10.10.1

A RemotePortShutdown table entry.

Indexes

rcPortRemotePortShutdownIfIndex

Column	Syntax	OID
rcPortRemotePortShutdownIfIndex The ifIndex value for a port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.4.10.10.1.1
rcPortRemotePortShutdownEnabled This object controls whether the Remote-Port-Shutdown feature is enabled or disabled on a port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.10.1.2
rcPortRemotePortShutdownHoldTimer Indicates the time period after a port has been shutdown during which it will remain down, regardless of any CCMs received during that time period.	secondsInteger32r/w Constraints: range: 0-10	.1.3.6.1.4.1.2272.1.4.10.10.1.3
rcPortRemotePortShutdownStatus This object indicates whether a port is shutdown by the remote port shutdown feature.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.4.10.10.1.4
rcPortRemotePortShutdownLocalMacAddress Local MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.10.1.5
rcPortRemotePortShutdownRemoteMacAddress Remote MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.10.1.6

Flush MAC entry on a port.

rcPortFlushMacEntry row .1.3.6.1.4.1.2272.1.4.10.11.1

Port mac flush table entry.

Indexes

rcPortFlushMacPortNum

Column	Syntax	OID
rcPortFlushMacPortNum Port number where the mac record exists.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.4.10.11.1.1
rcPortFlushMacAddr Mac Address that needs to be removed.	OctetStringr/w Constraints: range: 17-17	.1.3.6.1.4.1.2272.1.4.10.11.1.2
rcPortFlushMacVlanId Vlan Id associated with the Mac Address.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.4.10.11.1.3

This table contains one row per policy type per port
of media policy information (as a part of the MED
organizational extension) on the local system known
to this agent.

rcLldpXMedLocMediaPolicyEntry row .1.3.6.1.4.1.2272.1.4.10.12.1

Information about a particular policy on a specific
port component.

Indexes

rcLldpXMedLocMediaPolicyPortNum rcLldpXMedLocMediaPolicyAppType

Column	Syntax	OID
rcLldpXMedLocMediaPolicyPortNum .	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.4.10.12.1.1
rcLldpXMedLocMediaPolicyAppType The media type that defines the primary function of the application for the policy advertised by an endpoint.	LLDP-EXT-MED-MIBPolicyAppType Type Values: 0 unknown 1 voice 2 voiceSignaling 3 guestVoice 4 guestVoiceSignaling 5 softPhoneVoice 6 videoconferencing 7 streamingVideo 8 videoSignaling	.1.3.6.1.4.1.2272.1.4.10.12.1.2
rcLldpXMedLocMediaPolicyVlanID An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the …	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2272.1.4.10.12.1.3
rcLldpXMedLocMediaPolicyPriority This object contains the value of the 802.1p priority which is associated with the given port on the local system.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.4.10.12.1.4
rcLldpXMedLocMediaPolicyDscp This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.4.10.12.1.5
rcLldpXMedLocMediaPolicyUnknown A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' ind…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.12.1.6
rcLldpXMedLocMediaPolicyTagged A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.12.1.7
rcLldpXMedLocMediaPolicyRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.4.10.12.1.8

Port Lossless Ethernet Table

rcPortLosslessEnetEntry row .1.3.6.1.4.1.2272.1.4.10.13.1

Entry containing lossless Ethernet information
for a particular port.

Indexes

rcPortLosslessEnetIndex

Column	Syntax	OID
rcPortLosslessEnetIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. Lossless Ethernet will be limited to 10Gig ports.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.4.10.13.1.1
rcPortLosslessEnetConfigured To enable lossless mode for the port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.13.1.2
rcPortLosslessEnetPauseType Pause frame type. fc - Pause, pfc - priority-based flow control.	Enumerationr/w Enumerated Values: 1 fc 2 pfc	.1.3.6.1.4.1.2272.1.4.10.13.1.3
rcPortLosslessEnetPfcBandwidth Guaranteed bandwidth in Gbps when rcPortLosslessEnetPauseType is set to pfc(2).	Integer32r/w Constraints: range: 2-8	.1.3.6.1.4.1.2272.1.4.10.13.1.4

Port table for all channelized capable ports.

rcChannelizedPortEntry row .1.3.6.1.4.1.2272.1.4.10.14.1

Entry containing info for a key port of channelized
capable port.

Indexes

rcChannelizedPortIndex

Column	Syntax	OID
rcChannelizedPortIndex An index value that uniquely identifies a port which is channelized capable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.4.10.14.1.1
rcChannelizedPortChannelType port channelized type. Either 40G or 100G.	Enumeration Enumerated Values: 1 fortyGig 2 hundredGig	.1.3.6.1.4.1.2272.1.4.10.14.1.2
rcChannelizedPortAdminMode Administratively enable/disable the port channelized mode.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.14.1.3

Port extend table.

rcPortExtendEntry row .1.3.6.1.4.1.2272.1.4.10.15.1

Entry containing info for a key port.

Indexes

No indexes recorded

Column	Syntax	OID
rcPortExtendPortDisplayFormat The port format to display.	OctetString Constraints: range: 0-9	.1.3.6.1.4.1.2272.1.4.10.15.1.1

A table that contains VLACP information
about every port that is associated with this device.
A row appears in this table for each physical port.

rcPortVlacpStatsEntry row .1.3.6.1.4.1.2272.1.4.10.16.1

A list of Virtual Link Aggregation Control Protocol statistics
for each port on this device.

Indexes

rcPortVlacpIndex

Column	Syntax	OID
rcPortVlacpIndex The ifIndex of VLACP ports	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.4.10.16.1.1
rcPortVlacpStatsLACPDUsRx The number of valid VLACPDUs received on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.10.16.1.2
rcPortVlacpStatsLACPDUsTx The number of VLACPDUs transmitted on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.10.16.1.3
rcPortVlacpStatsLACPDUsMismatch The number of mismatched VLACPDUs in terms of seq-num RX'ed on this Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.10.16.1.4