RC-IP-MPLS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
108

rcIpMplsInterfaceTable

table
.1.3.6.1.4.1.2272.1.8.102.3 · 1 row entry · 16 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsInterfaceTable' 
Table of configured Mpls Interfaces.
rcIpMplsInterfaceEntry row .1.3.6.1.4.1.2272.1.8.102.3.1
An entry of rcIpMpls Interfaces In Table.
Indexes
Column Syntax OID
rcIpMplsInterfaceLay3Addr
Layer 3 address for the MPLS interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.3.1.1
rcIpMplsInterfaceLay3Mask
Layer 3 mask for the MPLS interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.3.1.2
rcIpMplsInterfaceIndex
Interface index for the IP interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.102.3.1.3
rcIpMplsInterfaceAdminStatus
Indicates whether the MPLS interface is enabled or not.
RAPID-CITYEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.102.3.1.4
rcIpMplsInterfaceIndLblDistMode
Indicates if the label distribution mode is independent or ordered.
Enumerationr/w
Enumerated Values:
1independent
2ordered
 .1.3.6.1.4.1.2272.1.8.102.3.1.5
rcIpMplsInterfaceConsLblRetenMode
Indicates if conservative or liberal retention mode is used for the MPLS interface.
Enumerationr/w
Enumerated Values:
1conservative
2liberal
 .1.3.6.1.4.1.2272.1.8.102.3.1.6
rcIpMplsInterfaceImdLblUseMode
Indicates what label-use-mode is used by the MPLS interface.
Enumerationr/w
Enumerated Values:
1immediate
2notImmediate
 .1.3.6.1.4.1.2272.1.8.102.3.1.7
rcIpMplsInterfaceNoRouteReqRetryMode
Not used in this release.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.3.1.8
rcIpMplsInterfacePenultimatePopRequest
Flag to indicate whether to give implicit
NULL labels for local networks.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.3.1.9
rcIpMplsInterfacePropogateLabelReleaseRequest
Not used in this release.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.3.1.10
rcIpMplsInterfaceLabelRequestMode
Indicates the label requiest mode used by the MPLS interface.
Enumerationr/w
Enumerated Values:
1requestNever
2requestWhenNeeded
3requestOnRequest
 .1.3.6.1.4.1.2272.1.8.102.3.1.11
rcIpMplsInterfaceOnDemandAdvMode
Indicates the label advertise mode used by the MPLS interface.
Enumerationr/w
Enumerated Values:
1downstreamOnDemand
2downstreamUnsolicited
 .1.3.6.1.4.1.2272.1.8.102.3.1.12
rcIpMplsInterfaceMtu
Not used in this release.
Integer32r/w
Constraints:
range: 64-1518
 .1.3.6.1.4.1.2272.1.8.102.3.1.13
rcIpMplsInterfaceLabelProtocol
Indicates the label protocol used by the interface.
Enumerationr/w
Enumerated Values:
1ldp
2rsvp
3both
 .1.3.6.1.4.1.2272.1.8.102.3.1.14
rcIpMplsInterfaceTraceFlag
Flag used for tracing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.3.1.15
rcIpMplsInterfaceRowStatus
Row Status for create/delete
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.8.102.3.1.16

rcIpMplsLdpInterfaceTable

table
.1.3.6.1.4.1.2272.1.8.102.7 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsLdpInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsLdpInterfaceTable' 
Table of configured Mpls LDP Interfaces.
rcIpMplsLdpInterfaceEntry row .1.3.6.1.4.1.2272.1.8.102.7.1
An entry of rcIpMpls LDP Interfaces In Table.
Indexes
Column Syntax OID
rcIpMplsLdpInterfaceLay3Addr
Layer 3 address of LDP interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.7.1.1
rcIpMplsLdpInterfaceLay3Mask
Layer3 mask for LDP interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.7.1.2
rcIpMplsLdpInterfaceIndex
Interface index for LDP interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.102.7.1.3
rcIpMplsLdpInterfaceTargetHelloFlag
Flag for enabling target hellos.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.7.1.4
rcIpMplsLdpInterfaceTargetResponseFlag
Flag to enable target response messgaes.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.7.1.5
rcIpMplsLdpInterfaceNonTtlLspFlag
Not used in this release.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.7.1.6
rcIpMplsLdpInterfaceRowStatus
Row status for the LDP interface.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.8.102.7.1.7

rcIpMplsRsvpInterfaceTable

table
.1.3.6.1.4.1.2272.1.8.102.9 · 1 row entry · 10 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsRsvpInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsRsvpInterfaceTable' 
Table of configured Mpls RSVP Interfaces.
rcIpMplsRsvpInterfaceEntry row .1.3.6.1.4.1.2272.1.8.102.9.1
An entry of rcIpMpls RSVP Interfaces In Table.
Indexes
Column Syntax OID
rcIpMplsRsvpInterfaceLay3Addr
Layer 3 address for RSVP interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.9.1.1
rcIpMplsRsvpInterfaceLay3Mask
Layer 3 mask for RSVP interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.9.1.2
rcIpMplsRsvpInterfaceIndex
Index for RSVP interface table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.102.9.1.3
rcIpMplsRsvpInterfaceAuthFlag
Not used in this release.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.9.1.4
rcIpMplsRsvpInterfaceHelloFlag
Flag to enable RSVP interface hello.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.9.1.5
rcIpMplsRsvpInterfaceRefreshReductionFlag
Not used in this release.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.9.1.6
rcIpMplsRsvpInterfaceMemoryReductionFlag
Not used in this release.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.9.1.7
rcIpMplsRsvpInterfaceReliableFlag
Not used in this release.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.9.1.8
rcIpMplsRsvpInterfaceEPolicingFlag
Not used in this release.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.9.1.9
rcIpMplsRsvpInterfaceRowStatus
Row status for RSVP interface.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.8.102.9.1.10

rcIpMplsLdpTargetAddrTable

table
.1.3.6.1.4.1.2272.1.8.102.11 · 1 row entry · 3 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsLdpTargetAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsLdpTargetAddrTable' 
Table of configured Mpls LDP target addresses.
rcIpMplsLdpTargetAddrEntry row .1.3.6.1.4.1.2272.1.8.102.11.1
An entry of rcIpMpls LDP target addresses In Table.
Indexes
Column Syntax OID
rcIpMplsLdpTargetAddrBaseAddr
The LDP interface IP address for which target address should
be configured
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.11.1.1
rcIpMplsLdpTargetAddrTgtAddr
The IP address configured to be the LDP target address
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.11.1.2
rcIpMplsLdpTargetAddrRowStatus
Row Status for LDP target address table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.8.102.11.1.3

rcIpMplsTunnelGroupTable

table
.1.3.6.1.4.1.2272.1.8.102.12 · 1 row entry · 11 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsTunnelGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsTunnelGroupTable' 
Table of Tunnel Groups.
rcIpMplsTunnelGroupEntry row .1.3.6.1.4.1.2272.1.8.102.12.1
An entry of rcIpMpls tunnel group In Table.
Indexes
Column Syntax OID
rcIpMplsTunnelGroupId
Tunnel Group Identifier
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.8.102.12.1.1
rcIpMplsTunnelGroupDestAddr
Group the tunnels with same destination IP address into the
tunnel group
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.12.1.2
rcIpMplsTunnelGroupPrimaryTunnel
List of primary tunnels contained in the tunnel group, diplayed
in the format of <tunnelId>/<priority>[,<tunnelId>/<priority>]
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.8.102.12.1.3
rcIpMplsTunnelGroupActiveTunnel
Active tunnel id in the Tunnel Group
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.102.12.1.4
rcIpMplsTunnelGroupPersistentFlag
Tunnel Group Persistent Flag
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.12.1.5
rcIpMplsTunnelGroupOperation
Add tunnel to the Tunnel Group or remove tunnel from the
tunnel group
Enumerationr/w
Enumerated Values:
0none
1addTunnel
2remTunnel
 .1.3.6.1.4.1.2272.1.8.102.12.1.6
rcIpMplsTunnelGroupTunnelList
List of Tunnels contained in the tunnel group, diplayed
in the format of <tunnelId>/<priority>[,<tunnelId>/<priority>], such as string
2,4,5 indicated the tunnel group contains tunnel 2, tunnel 4,
and tunnel 5
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.8.102.12.1.7
rcIpMplsTunnelGroupFtnList
List of fecs bineded to the tunnel group, the display
format is same as rcIpMplsTunnelGroupTunnelList
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.8.102.12.1.8
rcIpMplsTunnelGroupBgpNeighbor
BGP neigbors associated with the tunnel group
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.102.12.1.9
rcIpMplsTunnelGroupRowStatus
Row status for create/delete the tunnel group.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.8.102.12.1.10
rcIpMplsTunnelGroupBackupTunnel
Backup tunnel id in the Tunnel Group displayed
in the format <tunnelId/priority>
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.8.102.12.1.11

rcIpMplsTeInterfaceTable

table
.1.3.6.1.4.1.2272.1.8.102.14 · 1 row entry · 8 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsTeInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsTeInterfaceTable' 
rcIpMplsInterface Traffic-Eng table. This table 
contains rows which are traffic-eng configuration 
parameters for the link.
rcIpMplsTeInterfaceEntry row .1.3.6.1.4.1.2272.1.8.102.14.1
An entry of rcIpMplsInterface Te Table.
Indexes
Column Syntax OID
rcIpMplsTeInterfaceLay3Addr
Layer 3 address for the MPLS interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.14.1.1
rcIpMplsTeInterfaceLay3Mask
Layer 3 mask for the MPLS interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.14.1.2
rcIpMplsTeInterfaceIndex
Interface index for the IP interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.102.14.1.3
rcIpMplsTeInterfaceIgp
Traffic-eng IGP protocol to use on link.
Enumerationr/w
Enumerated Values:
0none
1ospf
 .1.3.6.1.4.1.2272.1.8.102.14.1.4
rcIpMplsTeInterfaceMetric
Traffic-eng metric to assign to the link.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.102.14.1.5
rcIpMplsTeInterfaceMaxBandwidth
Maximum bandwidth on the link in bits/sec in the
direction outwards from the local system.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.102.14.1.6
rcIpMplsTeInterfaceMaxReservableBandwidth
Maximum reservable bandwidth on the link in bits/sec in
the direction outwards from the local system.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.102.14.1.7
rcIpMplsTeInterfaceResourceColor
Resource class/color which represents administrative group
membership for the link. The integer value represents the
format of a hexadecimal 32-bit mask. A link that is a member
of more than one administrative group wi…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.2272.1.8.102.14.1.8

rcIpMplsTunnelTable

table
.1.3.6.1.4.1.2272.1.8.102.15 · 1 row entry · 3 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsTunnelTable' 
Table of Tunnels with label record info .
rcIpMplsTunnelEntry row .1.3.6.1.4.1.2272.1.8.102.15.1
An entry of rcIpMpls tunnel In Table.
Indexes
Column Syntax OID
rcIpMplsTunnelId
Tunnel Identifier
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.8.102.15.1.1
rcIpMplsTunnelLabelRecordFlag
Tunnel Identifier
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.15.1.2
rcIpMplsTunnelRowStatus
Creation or deletion of row
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.8.102.15.1.3

rcIpMplsTunnelExtTable

table
.1.3.6.1.4.1.2272.1.8.102.16 · 1 row entry · 6 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsTunnelExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsTunnelExtTable' 
The mplsTunnelExtTable provides enterprise
extension options for a mplsTunnelEntry that has
be created for a MPLS tunnel. The mplsTunnelEntry
must be created apriori.
rcIpMplsTunnelExtEntry row .1.3.6.1.4.1.2272.1.8.102.16.1
An entry of rcIpMpls Tunnel Ext Table.
Indexes
Column Syntax OID
rcIpMplsTunnelExtIndex
Uniquely identifies this row.
This an index object for the mplsTunnelExtTable entry that
in part also specifies the mpls tunnel entry with which this

tunnel extension entry is associated. The value of thi…
MPLS-TC-STD-MIBMplsTunnelIndex
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.8.102.16.1.1
rcIpMplsTunnelExtInstance
Uniquely identifies an instance of a tunnel's extended
entry. This an index object for the mplsTunnelExtTable entry
that
in part specifies the mpls tunnel with which this tunnel
extension entry is associated. Uniquely T…
MPLS-TC-STD-MIBMplsTunnelInstanceIndex
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.102.16.1.2
rcIpMplsTunnelExtEgressLSRId
The purpose of this object is to uniquely identity a
tunnel within a network to which this extended tunnel
table entry should apply. This an index object for the
mplsTunnelExtTable entry that in part specifies the mpls
…
MplsLsrId .1.3.6.1.4.1.2272.1.8.102.16.1.3
rcIpMplsTunnelExtIngressLSRId
Specifies the egress LSR id for which this extended tunnel
table entry should apply. This is an index object for the
mplsTunnelExtTable entry that in part specifies the mpls
tunnel with which this tunnel extension entry…
MplsLsrId .1.3.6.1.4.1.2272.1.8.102.16.1.4
rcIpMplsTunnelExtFrrTableIndex
Index into the mplsTunnelFrrTable entry that
specifies the frr path to use for the tunnel that implied
by the index objects of this row entry.
Specifying a frr path to use is optional.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.102.16.1.5
rcIpMplsTunnelExtRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.8.102.16.1.6

rcIpMplsTunnelFrrTable

table
.1.3.6.1.4.1.2272.1.8.102.17 · 1 row entry · 11 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsTunnelFrrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsTunnelFrrTable' 
The rcIpMplsTunnelFrrTable is used to indicate the
frr constraints for a frr detour LSP for a tunnel
specified as row entry in the mplsTunnelTable.The
frr constraints are established viasignaling, for
the outgoing direction of the tunnel. Each row in
this table is indexed by rcIpMplsTunnelFrrListIndex.
In this implementation it is intended that one row
entry may used as a frr template for multiple tunnels.
Conversely a row entry may be created for each tunnel,
or there may be a combination of both styles, one to one,
and one to many in the relationship between a row
entry of this table and tunnel(s).
rcIpMplsTunnelFrrEntry row .1.3.6.1.4.1.2272.1.8.102.17.1
An entry in this table represents a tunnel frr path. An
entry is created by a network administrator for
signaled LSP with frr path set up by an MPLS signaling proto
col.
Indexes
Column Syntax OID
rcIpMplsTunnelFrrListIndex
Primary index into this table identifying a particular
row entry of frr detour LSP contraints.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.8.102.17.1.1
rcIpMplsTunnelFrrSetupPrio
Setup priority for frr detour LSP.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.8.102.17.1.2
rcIpMplsTunnelFrrHoldingPrio
Holding priority for frr detour LSP.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.8.102.17.1.3
rcIpMplsTunnelFrrHopLimit
Maximum number of hops a frr detour LSP is allowed
to traverse.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.102.17.1.4
rcIpMplsTunnelFrrBandwidth
Bandwidth estimate with which to set up the frr detour LSPs
in units of a million bits per second (Mbps).
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.102.17.1.5
rcIpMplsTunnelFrrProtectionType
Frr backup or resource protection type to be used.
Enumerationr/w
Enumerated Values:
0oneToOneBackup
1facilityBackup
 .1.3.6.1.4.1.2272.1.8.102.17.1.6
rcIpMplsTunnelFrrExclAnyAffinity
Exclude any link in detour LSP setup which is represented by
administratively defined attributes associated with the bit
pattern of this object. The value represents the format of
a hexadecimal 32-bit vector or mask.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.2272.1.8.102.17.1.7
rcIpMplsTunnelFrrInclAnyAffinity
Allow detour LSP setup on any link which is represented by
administratively defined attributes associated with the bit
pattern of this object. The value represents the format of a

hexadecimal 32-bit vecto…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.2272.1.8.102.17.1.8
rcIpMplsTunnelFrrInclAllAffinity
Only allow detour LSP setup on links which contain at a
minimum the administratively defined attributes represented
by this bit pattern. The value represents the format of a
hexadecimal 32-bit vector or mask. A value of…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.2272.1.8.102.17.1.9
rcIpMplsTunnelFrrLegacyFlag
Flag to control the format of the frr object used. When
set to true, the legacy format is used which is a
class type of 7. When set to false the frr format used
is for class type of 1.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.17.1.10
rcIpMplsTunnelFrrRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.8.102.17.1.11

rcIpMplsTunnelHopToIpAddrMapTable

table
.1.3.6.1.4.1.2272.1.8.102.18 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsTunnelHopToIpAddrMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsTunnelHopToIpAddrMapTable' 
The rcIpMplsTunnelHopToIpAddrMapTable is used to maintain
mapping between Hop name and IP Address.
rcIpMplsTunnelHopToIpAddrMapEntry row .1.3.6.1.4.1.2272.1.8.102.18.1
An entry in this table represents a mapping between
Hop name and the IP Address.
Indexes
Column Syntax OID
rcIpMplsTunnelHopToIpAddrMapHopName
Primary index into this table identifying a hop name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.8.102.18.1.1
rcIpMplsTunnelHopToIpAddrMapIPAddr
Table column, identifying an IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.102.18.1.2
rcIpMplsTunnelHopToIpAddrMapIPAddrPrefixLen
Table column identifying IP Address prefix length.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.102.18.1.3
rcIpMplsTunnelHopToIpAddrMapRowStatus
Row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.8.102.18.1.4

rcIpMplsLspTable

table
.1.3.6.1.4.1.2272.1.8.102.19 · 1 row entry · 11 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsLspTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsLspTable' 
Table of originated, terminated and transit operational LSPs
with all cross connect information
rcIpMplsLspEntry row .1.3.6.1.4.1.2272.1.8.102.19.1
An entry of rcIpMpls Lsp in Table.
Indexes
Column Syntax OID
rcIpMplsLspTunnelIndex
Tunnel Index
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.8.102.19.1.1
rcIpMplsLspId
LSP ID
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.8.102.19.1.2
rcIpMplsLspIngressLsrId
Specifies the Ingress LSR Id
MplsLsrId .1.3.6.1.4.1.2272.1.8.102.19.1.3
rcIpMplsLspEgressLsrId
Specifies the Egress LSR Id
MplsLsrId .1.3.6.1.4.1.2272.1.8.102.19.1.4
rcIpMplsLspName
LSP Name
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.8.102.19.1.5
rcIpMplsLspType
This value signifies the role that this tunnel
entry/instance represents. This value MUST be set
to head(1) at the originating point of the tunnel.
This value MUST be set to transit(2) at transit
points along the tunnel…
Enumeration
Enumerated Values:
1head
2transit
3tail
 .1.3.6.1.4.1.2272.1.8.102.19.1.6
rcIpMplsLspDetour
The tunnel is a detour tunnel or not
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.8.102.19.1.7
rcIpMplsLspIncomingInterface
LSR-assigned ifIndex
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.8.102.19.1.8
rcIpMplsLspIncomingLabel
Incoming Label value
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.102.19.1.9
rcIpMplsLspOutgoingInterface
LSR-assigned ifIndex
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.8.102.19.1.10
rcIpMplsLspOutgoingLabel
Outgoing Label value
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.102.19.1.11

rcIpMplsIfTable

table
.1.3.6.1.4.1.2272.1.8.102.20 · 1 row entry · 18 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIpMplsIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IP-MPLS-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IP-MPLS-MIB::rcIpMplsIfTable' 
A table used to maintain MPLS information
for a particular interface.
rcIpMplsIfEntry row .1.3.6.1.4.1.2272.1.8.102.20.1
Entry containing MPLS information. An entry is
automatically created in this table when MPLS
is enabled for an interface -or- when an ip address
is configured on an interface.
Indexes
Column Syntax OID
rcIpMplsIfIfIndex
An unique value to identify a physical interface
or a logical interface (VLAN).
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2272.1.8.102.20.1.1
rcIpMplsIfLdpAdminState
Indicates whether LDP is enabled on the interface.
RAPID-CITYEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.102.20.1.2
rcIpMplsIfLdpSessionKeepAlive
Configures the LDP Session keep alive on the interface.
The value 0 is used to indicate a global value.
If 0 the interface will use the LDP global value
If greater than 0 this value will override the
LDP global value.
secondsUnsigned32r/w
Constraints:
range: 0-0
range: 15-65535
 .1.3.6.1.4.1.2272.1.8.102.20.1.3
rcIpMplsIfLdpHelloHoldTime
Configures the LDP hello hold time on the interface.
If 0 the interface will use the LDP global value.
If greater than 0 this value will override the
LDP global value.
secondsUnsigned32r/w
Constraints:
range: 0-0
range: 5-65535
 .1.3.6.1.4.1.2272.1.8.102.20.1.4
rcIpMplsIfLdpTransportAddr
Configures the transport address of the LDP lsp.
If not set then transport address will be the MPLS
router id.
Enumerationr/w
Enumerated Values:
1interface
2router-id
 .1.3.6.1.4.1.2272.1.8.102.20.1.5
rcIpMplsIfLdpImportPolicy
Configures the LDP import policy behavior.
If set to host-only then only host will import policies.
If set to all then all interfaces will import policies.
Enumerationr/w
Enumerated Values:
1all
2host-only
 .1.3.6.1.4.1.2272.1.8.102.20.1.6
rcIpMplsIfRsvpAdminState
Indicates whether RSVP is enabled on the interface.
RAPID-CITYEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.102.20.1.7
rcIpMplsIfRefreshReduction
Indicates whether RSVP refresh reduction is enabled or not.
If set to global, refresh reduction will take the global
RSVP refresh reduction value.
Enumerationr/w
Enumerated Values:
1enable
2disable
3global
 .1.3.6.1.4.1.2272.1.8.102.20.1.8
rcIpMplsIfRefreshInterval
Configures the RSVP refresh interval on the interface.
If set to zero, the refresh interval will default to
the global rsvp refresh interval.
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.102.20.1.9
rcIpMplsIfRefreshMultiplier
Configures the RSVP refresh multiplier for the interface.
If set to zero, the refresh interval will default to
to global rsvp refresh multiplier.
secondsUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.102.20.1.10
rcIpMplsIfRsvpHelloInterval
Configures the RSVP hello interval on the interface.
If 0 the interface will use the RSVP global value.
If greater than 0 this value will override the
RSVP global value.
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.102.20.1.11
rcIpMplsIfMessageBundling
Indicates whether RSVP message bundling is enabled or not.
If set to global, message bundling will take the global
RSVP message bundling value.
Enumerationr/w
Enumerated Values:
1enable
2disable
3global
 .1.3.6.1.4.1.2272.1.8.102.20.1.12
rcIpMplsIfMtu
Configures the mtu of the mpls interface.
The value cannot exceed that of the system mtu size.
Unsigned32r/w
Constraints:
range: 64-9600
 .1.3.6.1.4.1.2272.1.8.102.20.1.13
rcIpMplsIfRowStatus
Used to create/delete entries
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.8.102.20.1.14
rcIpMplsIfAuthentication
Used to enable/disable RSVP MD5 authentication.
RAPID-CITYEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.102.20.1.15
rcIpMplsIfAuthenticationKey
RSVP MD5 authentication key.
OctetStringr/w
Constraints:
range: 8-40
 .1.3.6.1.4.1.2272.1.8.102.20.1.16
rcIpMplsIfAdminGroupList
Bitmap of admin group ids. The LSB is the
lowest numbered admin group.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.102.20.1.17
rcIpMplsIfBandwidth
Maximum reservable bandwidth in kbps.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.102.20.1.18