RC-CB-SWITCH-FABRIC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
24

rcCbQueuingEngine2kTable

table
.1.3.6.1.4.1.2272.1.204.1.1.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcCbQueuingEngine2kTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-CB-SWITCH-FABRIC-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-CB-SWITCH-FABRIC-MIB::rcCbQueuingEngine2kTable' 
Table containing the 2k based queuing engine
entries for the system.
rcCbQueuingEngine2kEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.2.1
Entry for the QE Table
Indexes
Column Syntax OID
rcCbQueuingEngine2kId
Index for an entry in the QE Table. Here is the layout
of the IDs in relation to the system:

Location ID(s)
---------------------
IO on slot 3: 1..3
IO on slot 4: 4..6
CP on slot 1: 7
CP on slot 2: …
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.204.1.1.1.2.1.1
rcCbQueuingEngine2kStatus
Status of a given QE interface.
DeviceStatus
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.2.1.2

rcCbSwitchingEngine4kTable

table
.1.3.6.1.4.1.2272.1.204.1.1.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcCbSwitchingEngine4kTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-CB-SWITCH-FABRIC-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-CB-SWITCH-FABRIC-MIB::rcCbSwitchingEngine4kTable' 
Table containing the 4k based switching
engine entries for the system.
rcCbSwitchingEngine4kEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.3.1
Entry for the SE Table.
Indexes
Column Syntax OID
rcCbSwitchingEngine4kId
Index for the SE Table. Here is the layout
of the IDs in relation to the system:

Location ID(s)
---------------------
SF on slot 13: 1..3
SF on slot 14: 4..6
...
SF on slot 18: 16..18
Integer32
Constraints:
range: 1-18
 .1.3.6.1.4.1.2272.1.204.1.1.1.3.1.1
rcCbSwitchingEngine4kStatus
Status of a given SE Device.
DeviceStatus
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.3.1.2

rcCbSwitchingEngine9600Table

table
.1.3.6.1.4.1.2272.1.204.1.1.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcCbSwitchingEngine9600Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-CB-SWITCH-FABRIC-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-CB-SWITCH-FABRIC-MIB::rcCbSwitchingEngine9600Table' 
Table containing the 9600 based switching
engine entries for the system.
rcCbSwitchingEngine9600Entry row .1.3.6.1.4.1.2272.1.204.1.1.1.4.1
Entry for the SE 9600 Table.
Indexes
Column Syntax OID
rcCbSwitchingEngine9600Id
Index for the SE Table. Here is the layout
of the IDs in relation to the system:

Location ID(s)
---------------------
SF on slot 21: 1..2
SF on slot 22: 3..4
...
SF on slot 26: 11..12
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.2272.1.204.1.1.1.4.1.1
rcCbSwitchingEngine9600Status
Status of a given Fast SE Device.
DeviceStatus
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.4.1.2
rcCbSwitchingEngine9600Mode
Mode of given Fast SE Device either BME or SE.
SfDeviceMode
Type Values:
1other
2bme
3se
 .1.3.6.1.4.1.2272.1.204.1.1.1.4.1.3

rcCbQe2kSerdesLinkTable

table
.1.3.6.1.4.1.2272.1.204.1.1.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcCbQe2kSerdesLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-CB-SWITCH-FABRIC-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-CB-SWITCH-FABRIC-MIB::rcCbQe2kSerdesLinkTable' 
Table containing the Serdes Link Information
for the system.
rcCbQe2kSerdesLinkEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.5.1
Entry for a QE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link.
Indexes
Column Syntax OID
rcCbQe2kSerdesLinkId
This ID maps to a particular serdes port number
for the identified device. Gen-2 IO modules in
VSP9000 has 24 serdes links per QE, where as Gen-1
modules will have 20 serdes links per QE. The last 4
SerdesLinkId will b…
Integer32
Constraints:
range: 1-768
 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.1
rcCbQe2kSerdesLinkType
Link type of the serdes interface
Enumeration
Enumerated Values:
1sci
2sfi
 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.2
rcCbQe2kSerdesLinkStatus
Interface Status
DeviceStatus
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.3
rcCbQe2kSerdesLinkConnectedToDevice
The SE/BME ID to which the QE2k ID is attached
to. Note that IDs 16 & 18 are unused.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.4
rcCbQe2kSerdesLinkConnectedToSlot
The slot number of the switch fabric card to which the QE2k ID is attached to.
Integer32
Constraints:
range: 21-26
 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.5

rcCbSESerdesLinkTable

table
.1.3.6.1.4.1.2272.1.204.1.1.1.6 · 1 row entry · 5 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcCbSESerdesLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-CB-SWITCH-FABRIC-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-CB-SWITCH-FABRIC-MIB::rcCbSESerdesLinkTable' 
Table containing the Serdes Link Information
for the system.
rcCbSESerdesLinkEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.6.1
Entry for an SE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link.
Indexes
Column Syntax OID
rcCbSESerdesLinkId
This ID maps to a particular serdes port number
for the identified device. Here's the mapping:

SESerdesLinkId 1 = port 0; Slot 21; Device 1
SESerdesLinkId 33 = port 0; Slot 21; Device 2
SESerdesLinkId…
Integer32
Constraints:
range: 1-640
 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.1
rcCbSESerdesLinkType
Link Type of the Serdes interface. Switch control
interface is sci. Switch forwarding interface is sfi.
Enumeration
Enumerated Values:
1sci
2sfi
 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.2
rcCbSESerdesLinkStatus
Interface Status
DeviceStatus
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.3
rcCbSESerdesLinkConnectedToDevice
The QE2k ID to which the SE/BME ID is attached to.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.4
rcCbSESerdesLinkConnectedToSlot
The slot number of the switch fabric card to which the QE2k ID is attached to.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.5

rcCbSE9600SerdesLinkTable

table
.1.3.6.1.4.1.2272.1.204.1.1.1.7 · 1 row entry · 5 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcCbSE9600SerdesLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-CB-SWITCH-FABRIC-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-CB-SWITCH-FABRIC-MIB::rcCbSE9600SerdesLinkTable' 
Table containing the Fast Serdes Link Information
for the system.
rcCbSE9600SerdesLinkEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.7.1
Entry for an SE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link.
Indexes
Column Syntax OID
rcCbSE9600SerdesLinkId
This ID maps to a particular serdes port number
for the identified device. Here's the mapping:

SESerdesLinkId 1 = port 0; Slot 21; Device 1
SESerdesLinkId 97 = port 0; Slot 21; Device 2
SESerdesLink…
Integer32
Constraints:
range: 1-1152
 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.1
rcCbSE9600SerdesLinkType
Link Type of the Serdes interface. Switch control
interface is sci. Switch forwarding interface is sfi.
Enumeration
Enumerated Values:
1sci
2sfi
 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.2
rcCbSE9600SerdesLinkStatus
Interface Status
DeviceStatus
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.3
rcCbSE9600SerdesLinkConnectedToDevice
The QE2k ID to which the SE/BME ID is attached to.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.4
rcCbSE9600SerdesLinkConnectedToSlot
The slot number of the switch fabric card to which the QE2k ID is attached to.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.5

rcCbSPITable

table
.1.3.6.1.4.1.2272.1.204.1.1.1.8 · 1 row entry · 2 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcCbSPITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-CB-SWITCH-FABRIC-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-CB-SWITCH-FABRIC-MIB::rcCbSPITable' 
Table containing the system peripheral interface info.
rcCbSPIEntry row .1.3.6.1.4.1.2272.1.204.1.1.1.8.1
SPI table entry
Indexes
Column Syntax OID
rcCbSPIId
The Index for the SPI Table. Here is the layout
of the IDs in relation to the system:

Location ID(s)
---------------------
Slot 1: 1..6
Slot 2: 7..12
...
Slot 12: 57..72

Current impleme…
Integer32
Constraints:
range: 1-72
 .1.3.6.1.4.1.2272.1.204.1.1.1.8.1.1
rcCbSPIStatus
SPI Status
DeviceStatus
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.8.1.2