RBN-ICR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
13

rbnIcrTable

table
.1.3.6.1.4.1.2352.2.101.1.1 · 1 row entry · 13 columns
Uses the ericsson variant from /opt/observium/mibs/ericsson.
Command help
Walk rbnIcrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RBN-ICR-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RBN-ICR-MIB::rbnIcrTable'
This table consists of ICR management objects.
rbnIcrEntry row .1.3.6.1.4.1.2352.2.101.1.1.1
Each entry contains management objects of an ICR node.
Indexes
Column Syntax OID
The unique identifier of the ICR node.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.2352.2.101.1.1.1.1
This object indicates the type of 'rbnIcrLocalAddress'.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2352.2.101.1.1.1.2
This object indicates the local address used to send/receive
ICR messages. The type of the address is determined by the
corresponding 'rbnIcrLocalAddressType'.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2352.2.101.1.1.1.3
This object indicates the local port number used to send/receive ICR
messages.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.2352.2.101.1.1.1.4
This object indicates the type of 'rbnIcrPeerAddress'.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.2352.2.101.1.1.1.5
This object indicates the address used by the peer ICR node to
send/receive ICR messages. The type of the address is determined by
the corresponding 'rbnIcrPeerAddressType'.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2352.2.101.1.1.1.6
This object indicates the port number used by the peer ICR node
to send/receive ICR messages.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.2352.2.101.1.1.1.7
This object indicates the ICR priority. The priority is used
for setting the initial preference level when the prefixes are
advertised and is used for tie-break in case both the local ICR
node and its peer node are boot…
Enumerationr/w
Enumerated Values:
1low
2high
.1.3.6.1.4.1.2352.2.101.1.1.1.8
This object indicates the interval that the node sends ICR
keep alive messages to its peer node.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2352.2.101.1.1.1.9
This object indicates the time, after which, if the node
has not received a ICR keep alive message from its peer node, it
declares the peer loss.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2352.2.101.1.1.1.10
The current ICR state:

- 'initialize', which indicates that the node is in
the process of deciding its role(active or standby).

- 'active', which indicates that the node operates as ICR …
Enumeration
Enumerated Values:
1initialize
2active
3standby
4pendingStandby
.1.3.6.1.4.1.2352.2.101.1.1.1.11
This object controls ICR node. Setting this object to 'up' will
enable the ICR node. The node will transition from 'initialize' state
to 'active' or 'standby' state depending on the value of
'rbnIcrPriority'. Setting th…
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.2352.2.101.1.1.1.12
The object is used to create and delete 'rbnIcrEntry' conceptual
rows.

Except 'rbnIcrAdminStatus', 'read-create' objects in the conceptual
row cannot be modified when rbnIcrRowStatus is set to active(1).
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2352.2.101.1.1.1.13