RBN-ICR-MIB

        This MIB describes objects used for managing Inter Chassis
Resilience(ICR).
    
Source file
RBN-ICR-MIB
Last revised
Identity
rbnIcrMIB
Base OID
1.3.6.1.4.1.2352.2.101
Imported Objects
INET-ADDRESS-MIB InetAddress InetAddressType InetPortNumber
RBN-SMI rbnMgmt
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC RowStatus
Net-SNMP examples using the ericsson MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RBN-ICR-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RBN-ICR-MIB::rbnIcrMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RBN-ICR-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RBN-ICR-MIB::rbnIcrMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (22)
.1.3.6.1.4.1.2352.2.101
.1.3.6.1.4.1.2352.2.101.0
.1.3.6.1.4.1.2352.2.101.1
.1.3.6.1.4.1.2352.2.101.1.1
.1.3.6.1.4.1.2352.2.101.1.1.1
Integer32
.1.3.6.1.4.1.2352.2.101.1.1.1.1
.1.3.6.1.4.1.2352.2.101.1.1.1.10
Enumeration
.1.3.6.1.4.1.2352.2.101.1.1.1.11
Enumeration
.1.3.6.1.4.1.2352.2.101.1.1.1.12
.1.3.6.1.4.1.2352.2.101.1.1.1.13
.1.3.6.1.4.1.2352.2.101.1.1.1.2
.1.3.6.1.4.1.2352.2.101.1.1.1.3
.1.3.6.1.4.1.2352.2.101.1.1.1.4
.1.3.6.1.4.1.2352.2.101.1.1.1.5
.1.3.6.1.4.1.2352.2.101.1.1.1.6
.1.3.6.1.4.1.2352.2.101.1.1.1.7
Enumeration
.1.3.6.1.4.1.2352.2.101.1.1.1.8
.1.3.6.1.4.1.2352.2.101.1.1.1.9
Enumeration
.1.3.6.1.4.1.2352.2.101.1.2
.1.3.6.1.4.1.2352.2.101.2
.1.3.6.1.4.1.2352.2.101.2.1
.1.3.6.1.4.1.2352.2.101.2.2
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. INET-ADDRESS-MIBrfc
  4. RBN-SMIericsson
  5. SNMPv2-CONFrfc
  6. RBN-ICR-MIBericssonselected
Conformance Groups (3)
Compliance Statements (1)

OID .1.3.6.1.4.1.2352.2.101.2.1.1
The compliance statement for ICR MIB implementations.
Required groups
Object refinements
ObjectAccessSyntaxDescription
rbnIcrLocalAddressType readonly
unknown(0), ipv4(1), ipv6(2)
Write access is not required. Only IPv4 and IPv6 addresses
require to support.
rbnIcrLocalAddress readonly Write access is not required. Only IPv4 and IPv6 addresses
require to support.
rbnIcrLocalPort readonly
Write access is not required.
rbnIcrPeerAddressType readonly
unknown(0), ipv4(1), ipv6(2)
Write access is not required. Only IPv4 and IPv6 addresses
require to support.
rbnIcrPeerAddress readonly Write access is not required. Only IPv4 and IPv6 addresses
require to support.
rbnIcrPeerPort readonly
Write access is not required.
rbnIcrPriority readonly
Write access is not required.
rbnIcrKeepAliveInterval readonly
Write access is not required.
rbnIcrHoldTime readonly
Write access is not required.
rbnIcrAdminStatus readonly
Write access is not required.
rbnIcrRowStatus readonly
Write access is not required.
Notifications / Traps (4)
NameOIDDescription
.1.3.6.1.4.1.2352.2.101.0.1
This notification is sent when the state of the ICR node has changed
to active.
.1.3.6.1.4.1.2352.2.101.0.2
This notification is sent when the state of the ICR node has changed
to standby.
.1.3.6.1.4.1.2352.2.101.0.3
This notification is sent when the state of the ICR node has changed
to pendingStandby.
.1.3.6.1.4.1.2352.2.101.0.4
This notification is sent when an ICR inconsistency error is
encountered.