RBN-CONFIG-FILE-MIB Table View

A table which is used to start and monitor a process which
loads a configuration file, or saves the current configuration
out to a file.
          
The suggested method to create a new entry is:
          
    1. GET(rcfJobSpinLock.0,
           rcfJobNextIndex.0) and save in
       slValue, niValue respectively
    2. SET(rcfJobSpinLock.0 = slValue,
           rcfJobXxx.niValue = ...
           rcfJobYyy.niValue = ...
           ...
           rcfJobRowStatus.niValue = 'createAndGo')
           
Entries whose state is 'completed' may be automatically
deleted by the system after some system dependant time.

rcfJobEntry row .1.3.6.1.4.1.2352.2.13.1.1.3.1

An entry created by a Command Generator application which starts
and monitors a process which loads a system configuration file or
saves the current system configuration out to a file.

When rcfJobRowStatus…

Indexes

rcfJobIndex

Column	Syntax	OID
rcfJobIndex A unique identifier for an entry in this table.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2352.2.13.1.1.3.1.1
rcfJobOp The configuration operation to perform. If 'load', the file specified in rcfJobFilename is retrieved, parsed and loaded into the system configuration. If 'save', the current system configur…	Enumerationr/w Enumerated Values: 0 load 1 save	.1.3.6.1.4.1.2352.2.13.1.1.3.1.2
rcfJobProtocol The file transfer protocol to use. If 'local', the filename specified in rcfJobFilename exists locally on the Redback system (eg in /flash). If 'tftp', the filename specified in rcfJobFilen…	Enumerationr/w Enumerated Values: 0 local 1 tftp 2 ftp	.1.3.6.1.4.1.2352.2.13.1.1.3.1.3
rcfJobFilename The name of the source file (loads) or destination file (saves).	OctetStringr/w Constraints: range: 1-128	.1.3.6.1.4.1.2352.2.13.1.1.3.1.4
rcfJobIpAddressType The address type for rcfJobIpAddress. This object is only relevant for non-local filenames. If rcfJobProtocol equals 'local', any value for this object will effectively be ignored.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2352.2.13.1.1.3.1.5
rcfJobIpAddress The IP address for the file server which contains the source file (loads) or destination file (saves). This object is only relevant for non-local filenames. If rcfJobProtocol equals 'local', any value for…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2352.2.13.1.1.3.1.6
rcfJobUsername The username to use for authentication with the file server. This object is only relevant for the FTP protocol. If rcfJobProtocol does not equal 'ftp', any value for this object will effectively be ignore…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2352.2.13.1.1.3.1.7
rcfJobPassword The password to use for authentication with the file server. A zero-length string value would be used for usernames that do not require a password. This object is only relevant for the FTP protocol. If rc…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2352.2.13.1.1.3.1.8
rcfJobPassiveMode Enables/disables passive mode on FTP connections. This object is only relevant for the FTP protocol. If rcfJobProtocol does not equal 'ftp', any value for this object will effectively be ignored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.13.1.1.3.1.9
rcfJobStopAtLine If this object instance has a non-zero value, parsing and loading of the configuration file will terminate after the specified line number. This object is only relevant for 'load' operations. If rcfJobOp …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2352.2.13.1.1.3.1.10
rcfJobSaveDefaults If 'true', default values for all configuration values are saved. If 'false', only the values which have been explicitly configured are saved. This object is only relevant for 'save' operations. If rcfJob…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.13.1.1.3.1.11
rcfJobState The current state of the configuration job. pending -- The initial state of all jobs. Jobs are queued and processed in order of creation. inProgress -- The job is actively being performed…	Enumeration Enumerated Values: 0 pending 1 inProgress 2 completed	.1.3.6.1.4.1.2352.2.13.1.1.3.1.12
rcfJobResult A generic result code. This object is instantiated only when rcfJobStatus equals 'completed'. success -- The job completed successfully. other -- An error that doesn't fall into one of the categor…	Enumeration Enumerated Values: 0 success 1 other 2 noMemory 3 parse 4 io 5 access	.1.3.6.1.4.1.2352.2.13.1.1.3.1.13
rcfJobErrorMsgs Detailed error messages generated during the configuration operation. This object is instantiated only when rcfJobState equals 'completed'. Note: the amount of error messages produced by a configuration …	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2352.2.13.1.1.3.1.14
rcfJobCreateTime The value of sysUpTime when this job entry was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2352.2.13.1.1.3.1.15
rcfJobStartTime The value of sysUpTime when rcfJobState moved from 'pending' to 'inProgress'. This object will not be instantiated until rcfJobState moves to 'inProgress'. The object will be un-instantiated if rcfJobRowS…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2352.2.13.1.1.3.1.16
rcfJobStopTime The value of sysUpTime when the job completed. This object will not be instantiated until rcfJobState moves to 'completed'. The object will be un-instantiated if rcfJobRowStatus is set to 'notInService'.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2352.2.13.1.1.3.1.17
rcfJobNotifyOnCompletion If 'true', an rcfJobCompleted notification will be generated when the job completes.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.13.1.1.3.1.18
rcfJobOwner This object can be used to identify who/what/where created this job entry.	RMON-MIBOwnerStringr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.2352.2.13.1.1.3.1.19
rcfJobRowStatus The row status for creating, modifying, or deleting an entry in the table. Note that 'active' entries cannot be modified. Any attempt to modify an object in this entry while rcfJobRowStatus equals 'act…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2352.2.13.1.1.3.1.20