RBN-ATM-PVC-OAM-MIB

        Defines the objects required to monitor the ATM PVC OAM
(Operation, Administration, and Maintenance) function.
        
The OAM functionality may be enabled on one or more ATM PVCs
in a system.  When this functionality is enabled on a given
PVC, the system	will periodically generate OAM F5 end-to-end
loopback cells on the PVC.  The primary goal of this function
is to insure that an ATM PVC is brought down if the loss of
network connectivity to the remote end is detected by the
failure of the F5 OAM heartbeat cell.  In addition, when this
function is enabled on a PVC, receipt of an incoming F5 OAM
VC-AIS (Virtual Circuit - Alarm Indication Signal) cell or
F5 OAM VC-RDI (Virtual Circuit - Remote Detection Indicator)
cell will also cause the associated PVC to be brought down.
    
Source file
RBN-ATM-PVC-OAM-MIB
Last revised
Identity
rbnAtmPvcOamMib
Base OID
1.3.6.1.4.1.2352.2.19
Imported Objects
RBN-SMI rbnMgmt
RBN-TC RbnPort RbnSlot
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
Net-SNMP examples using the ericsson MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RBN-ATM-PVC-OAM-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RBN-ATM-PVC-OAM-MIB::rbnAtmPvcOamMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RBN-ATM-PVC-OAM-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RBN-ATM-PVC-OAM-MIB::rbnAtmPvcOamMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (13)
.1.3.6.1.4.1.2352.2.19
.1.3.6.1.4.1.2352.2.19.0
.1.3.6.1.4.1.2352.2.19.1
.1.3.6.1.4.1.2352.2.19.1.1
.1.3.6.1.4.1.2352.2.19.1.1.1
.1.3.6.1.4.1.2352.2.19.1.1.1.1
.1.3.6.1.4.1.2352.2.19.1.1.1.2
Integer32
.1.3.6.1.4.1.2352.2.19.1.1.1.3
Integer32
.1.3.6.1.4.1.2352.2.19.1.1.1.4
Enumeration
.1.3.6.1.4.1.2352.2.19.1.1.1.5
.1.3.6.1.4.1.2352.2.19.2
.1.3.6.1.4.1.2352.2.19.2.1
.1.3.6.1.4.1.2352.2.19.2.2
Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. RBN-SMIericsson
  3. SNMPv2-TCrfc
  4. RBN-TCericsson
  5. SNMPv2-CONFrfc
  6. RBN-ATM-PVC-OAM-MIBericssonselected
Conformance Groups (2)
The collection of objects which allow monitoring of the
ATM PVC OAM function.
.1.3.6.1.4.1.2352.2.19.2.2.1
The collection of notifications which allow monitoring of the
ATM PVC OAM function.
.1.3.6.1.4.1.2352.2.19.2.2.2
Compliance Statements (1)

OID .1.3.6.1.4.1.2352.2.19.2.1.1
The compliance statement for SNMP entities which implement
the Redback ATM PVC OAM MIB.
Required groups
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.2352.2.19.0.1
A notification indicating that the state of an ATM PVC has
transitioned as a result of the ATM PVC OAM function. This
notification will be sent if the value of rbnAtmPvcOamStatusState
transitions from oamUp to any of the three oamDown values, or if
it transitions from any of the three oamDown values to oamUp.