Standard view Table view

RAPID-IPSEC-ENDPOINT-PAIR-MIB

        The MIB module describes generic Ipsec Endpoint Pair information
of RapidStream system.  Mainly, the information 
obtained from this MIB is used to constructed topological
view of IPSec security gateways that are connected by
IPSec tunnels. 
           
An IPSec Endpoint Pair is a pair of security gateways that
are connected with 0 or more IPSec SA's in tunnel mode.  
It contains information of aggregated information 
of tunnel mode SA's between two security gateways.
        
An IPSec Endpoint Pair is identified by a pair of IP addresses.
Therefore, if an IPSec security gateway X has 2 external
IP addresses while IPsec secruity gateway Y has 3 external
IP addresses, there are potentially 6 IPsec Endpoint Pairs
between X and Y.
Source file
RAPID-IPSEC-ENDPOINT-PAIR-MIB
Last revised
Identity
rsIpsecEndpointPairModule
Base OID
1.3.6.1.4.1.4355.5
Imported Objects
RAPID-MIB rapidstream
SNMPv2-SMI enterprises Gauge32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32
Net-SNMP examples using the watchguard MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RAPID-IPSEC-ENDPOINT-PAIR-MIB' -M '/opt/observium/mibs/watchguard:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RAPID-IPSEC-ENDPOINT-PAIR-MIB::rsIpsecEndpointPairModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAPID-IPSEC-ENDPOINT-PAIR-MIB' -M '/opt/observium/mibs/watchguard:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAPID-IPSEC-ENDPOINT-PAIR-MIB::rsIpsecEndpointPairModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (42)
rsIpsecEndpointPairModule
.1.3.6.1.4.1.4355.5
rsIpsecEndpointPairMIB
.1.3.6.1.4.1.4355.5.1
rsIpsecEndpointPair
.1.3.6.1.4.1.4355.5.1.1
rsIpsecEndpointPairNum
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.4355.5.1.1.1
rsIpsecEndpointPairTable
.1.3.6.1.4.1.4355.5.1.1.2
rsIpsecEndpointPairEntry
rsIpsecEndpointPairIndex
 .1.3.6.1.4.1.4355.5.1.1.2.1
rsIpsecEndpointPairIndex
Integer32
 .1.3.6.1.4.1.4355.5.1.1.2.1.1
rsIpsecEndpointPairDecryptErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.1.2.1.10
rsIpsecEndpointPairAuthErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.1.2.1.11
rsIpsecEndpointPairReplayErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.1.2.1.12
rsIpsecEndpointPairPolicyErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.1.2.1.13
rsIpsecEndpointPairPadErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.1.2.1.14
rsIpsecEndpointPairOtherReceiveErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.1.2.1.15
rsIpsecEndpointPairSendErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.1.2.1.16
rsIpsecEndpointPairLocalAddr
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.4355.5.1.1.2.1.2
rsIpsecEndpointPairPeerAddr
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.4355.5.1.1.2.1.3
rsIpsecEndpointPairInSAs
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.4355.5.1.1.2.1.4
rsIpsecEndpointPairOutSAs
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.4355.5.1.1.2.1.5
rsIpsecEndpointPairInAccKbytes
KbytesSNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.1.2.1.6
rsIpsecEndpointPairOutAccKbytes
KbytesSNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.1.2.1.7
rsIpsecEndpointPairInPackets
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.1.2.1.8
rsIpsecEndpointPairOutPackets
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.1.2.1.9
rsIpsecEndpointPairStatistics
.1.3.6.1.4.1.4355.5.1.2
rsIpsecEndpointPairTotalInSAs
SNMPv2-SMIGauge32
 .1.3.6.1.4.1.4355.5.1.2.1
rsIpsecEndpointPairTotalPolicyErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.2.10
rsIpsecEndpointPairTotalPadErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.2.11
rsIpsecEndpointPairTotalOtherReceiveErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.2.12
rsIpsecEndpointPairTotalSendErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.2.13
rsIpsecEndpointPairTotalOutSAs
SNMPv2-SMIGauge32
 .1.3.6.1.4.1.4355.5.1.2.2
rsIpsecEndpointPairTotalInAccKbytes
KbytesSNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.2.3
rsIpsecEndpointPairTotalOutAccKbytes
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.2.4
rsIpsecEndpointPairTotalInPackets
KbytesSNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.2.5
rsIpsecEndpointPairTotalOutPackets
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.2.6
rsIpsecEndpointPairTotalDecryptErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.2.7
rsIpsecEndpointPairTotalAuthErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.2.8
rsIpsecEndpointPairTotalReplayErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.4355.5.1.2.9
rsIpsecEndpointPairPeerIPToTunnel
.1.3.6.1.4.1.4355.5.1.3
rsIpsecEndpointPairPeerIPToTunnelNum
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.4355.5.1.3.1
rsIpsecEndpointPairPeerIPToTunnelTable
.1.3.6.1.4.1.4355.5.1.3.2
rsIpsecEndpointPairPeerIPToTunnelEntry
rsIpsecEndpointPairPeerIPToTunnelPeerIPrsIpsecEndpointPairPeerIPToTunnelTunnelID
 .1.3.6.1.4.1.4355.5.1.3.2.1
rsIpsecEndpointPairPeerIPToTunnelPeerIP
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.4355.5.1.3.2.1.1
rsIpsecEndpointPairPeerIPToTunnelTunnelID
Integer32
 .1.3.6.1.4.1.4355.5.1.3.2.1.2
Dependencies (2) 2 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. RAPID-MIBwatchguard
  3. RAPID-IPSEC-ENDPOINT-PAIR-MIBwatchguardselected