RAISECOM-SLA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
167

rcSlaConfigTable

table
.1.3.6.1.4.1.8886.6.1.36.2.1 · 1 row entry · 21 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlaConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcSlaConfigTable' 
This table contains sla  control data.
rcSlaConfigEntry row .1.3.6.1.4.1.8886.6.1.36.2.1.1
A collection of objects that define three conceptual
control row : slaY.1731EntryTable, slaIcmpEntryTable, slaSchEntryTable.
The 'slaY.1731EntryTable' is used to control y1731 operation .
The following objects must b…
Indexes
Column Syntax OID
rcSlaConfigOperId
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.1
rcSlaConfigOwner
This object specifies a string which used by a managing application
to identify the entity that created this operation.
OctetStringr/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.2
rcSlaOneWaySupport
Specifies the type of decision whether to support one way test.
RcSlaOWSupport
Type Values:
1sla-unknown
2sla-support
3sla-no-support
Description:
The type use to decide whether to support one way Test.
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.3
rcSlaConfigOperType
Specifies the type of operation to be performed.
RcSlaCfgOperTyper/w
Type Values:
1y1731-echo
2y1731-jitter
3icmp-echo
4icmp-jitter
5y1731-pkt-loss
Description:
Specifies the type of operation to be performed.
The value 'y1731-echo' will cause the application to perform a timed echo y1731
operation directed at the 'rcSlaConfigDestMacAddr' or 'rcSlaConfigRMepId'.
The value 'y1…
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.4
rcSlaConfigCos
This object specifies the Class Of Service field
in an frame header of SLA PDU to be used by Y.1731 operation.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.5
rcSlaConfigCVlanId
This object specifies the CVlan user configured
in an frame header of SLA PDU to be used by Y.1731 operation.
It could be zero when there is no cunsomer vlan
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.6
rcSlaConfigSVlanId
This object specifies the identifier of VLAN for MA to be used by Y.1731 operation.
It is an unique identifier for a service instance
within a Maintenance Domain specified by rcSlaConfigMDLevel.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.7
rcSlaConfigMDLevel
This object specifies the maintenance domain level to be used by Y.1731 operation.
IEEE8021-CFM-MIBDot1agCfmMDLevelr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.8
rcSlaConfigRMepId
This object specifies the Target Remote MEP Identify to be used by Y.1731 operation.
IEEE8021-CFM-MIBDot1agCfmMepIdr/w
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.9
rcSlaConfigDestMacAddr
This object specifies the Target MAC Address Field to be used by Y.1731 operation.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.10
rcSlaConfigDestIpAddr
This object specifies the Target IP Address Field to be used by ICMP operation.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.11
rcSlaConfigJitterInterval
This value specifies the inter-frame delay between Ethernet
frames that need to be transmitted to the target device.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.12
rcSlaConfigJitterFrameNums
This object specifies the number of frames that need to be transmitted to the target device.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.13
rcSlaConfigScheduleStartTime
This object specifies the time when this schedule status will become 'active'.
Value of 0 puts in other status.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.14
rcSlaConfigScheduleLife
This object specifies the time duration over the whole schedule process.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.15
rcSlaConfigSchedulePeriod
This object specifies the duration between two SLA test
which includes all of probes schedule process in test.
Take above example, if all of the rcSlaConfigSchedulePeriod of three operations are set to 60,
then the s…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.16
rcSlaConfigScheduleStatus
This object specifies the status of Schedule.
The status column has five defined values:
- `scheduleInitial', which indicates that the operation has not been scheduled ;
- `scheduleCreate', which is supplied by…
RcSlaCfgScheduleStatusr/w
Type Values:
1scheduleInitial
2scheduleCreate
3scheduleBreak
4scheduleActive
5scheduleComplete
Description:
The RcSlaCfgScheduleStatus textual convention is used to manage the
creation and deletion of Schedule.
The status column has five defined values:
- `scheduleInitial', which indicates that the operation dose not be
sc…
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.17
rcSlaConfigRowStatus
The status of the row.
All columns must have a valid value before a row can be activated.
The following objects must be specified obviously in order for row status object to become active.
rcSlaConfigOperId
rcSlaConf…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.18
rcSlaConfigParam
This object uses to restore the value of config params which is needed by all kinds of operation.
The meaning of this object decides by different operation :
For Y.1731 operation, this object means:
-- Ty…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.19
rcSlaConfigDscp
This object specifies the Differentiated Services Code Point field in header of ip.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.21
rcSlaConfigTestPduLength
This object specifies the length of test pdus.
This object is only valid for the entity transmitting the Loss
Measurement frames, type 'Slm','DM' and is ignored by the
entity receiving frames. It is not applicable for…
Integer32r/w
Constraints:
range: 64-9600
 .1.3.6.1.4.1.8886.6.1.36.2.1.1.22

rcSlaLatestTable

table
.1.3.6.1.4.1.8886.6.1.36.3.1 · 1 row entry · 19 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlaLatestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcSlaLatestTable' 
This table contains the statistics calculated for the 
latest sent frames.
rcSlaLatestEntry row .1.3.6.1.4.1.8886.6.1.36.3.1.1
A collection of objects that record the latest operation.

An entry is created only when the operation has been set and scheduled.
The entry will start to collect data when rcSlaConfigScheduleStatus
i…
Indexes
Column Syntax OID
rcSlaLatestTXNum
This object specifies the number of RTT's probe sent in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.1
rcSlaLatestRTTNum
This object specifies the number of RTT's probe that were successfully measured in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.2
rcSlaLatestRTTSum
This object specifies the sum of RTT's delay that were successfully measured in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.3
rcSlaLatestRTTSumJitter
This object specifies the number of RTT's jitter that were successfully measured in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.4
rcSlaLatestRTTSum2
This object specifies the sum of squares of RTT's delay that are successfully measured in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.5
rcSlaLatestRTTMin
This object specifies the minimum of RTT's that were successfully measured in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.6
rcSlaLatestRTTMax
This object specifies the maximum of RTT's that were successfully measured in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.7
rcSlaLatestRTTNumSD
This object specifies the number of RTT's probe
that were successfully measured from source to destination in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.8
rcSlaLatestRTTSumSD
This object specifies the sum of RTT's delay
that were successfully measured from source to destination in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.9
rcSlaLatestRTTSumJitterSD
This object specifies the number of RTT's jitter that were successfully measured from source to destination in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.10
rcSlaLatestRTTSum2SD
This object specifies the sum of squares of RTT's delay that are successfully measured from source to destination in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.11
rcSlaLatestRTTMinSD
This object specifies the minimum of RTT's that were successfully measured from source to destination in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.12
rcSlaLatestRTTMaxSD
This object specifies the maximum of RTT's that were successfully measured from source to destination in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.13
rcSlaLatestRTTNumDS
This object specifies the number of RTT's probe
that were successfully measured from destination to source in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.14
rcSlaLatestRTTSumDS
This object specifies the sum of RTT's delay
that were successfully measured from destination to source in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.15
rcSlaLatestRTTSumJitterDS
This object specifies the number of RTT's jitter that were successfully measured from destination to source in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.16
rcSlaLatestRTTSum2DS
This object specifies the sum of squares of RTT's delay that are successfully measured from destination to source in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.17
rcSlaLatestRTTMinDS
This object specifies the minimum of RTT's that were successfully measured from destination to source in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.18
rcSlaLatestRTTMaxDS
This object specifies the maximum of RTT's that were successfully measured from destination to source in latest test.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.1.1.19

rcSlaStatisticTable

table
.1.3.6.1.4.1.8886.6.1.36.3.2 · 1 row entry · 25 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlaStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcSlaStatisticTable' 
The 'SlaStatistic' statistics table contains summarized
information of the results for a conceptual control row.
rcSlaStatisticEntry row .1.3.6.1.4.1.8886.6.1.36.3.2.1
This entry contains the objects which accumulate the
results of a series of 'Jitter' operations over a time
period stored in rcSlaConfigScheduleLife.
An entry is created only when the operation has been set and sc…
Indexes
Column Syntax OID
rcSlaStatisticStartTime
This object specifies the time when the operation starts to be scheduled.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.1
rcSlaStatisticScheduleLife
This object specifies the time duration over the whole schedule process.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.2
rcSlaStatisticSchedulePeriod
This object specifies the number of RTT's probe that were successfully measured in schedule.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.3
rcSlaStatisticTXNum
This object specifies the duration between two SLA test
which includes all of probes schedule process in test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.4
rcSlaStatisticRTTNum
This object specifies the duration between two SLA test
which includes all successful probes schedule process in test.
Take above example, if all of the rcSlaConfigSchedulePeriod of three operations are set to 60,
th…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.5
rcSlaStatisticRTTSums
This object specifies the sum of RTT's delay that were successfully measured in schedule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.6
rcSlaStatisticRTTSumJitter
This object specifies the number of RTT's jitter that were successfully measured in Schedule.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.7
rcSlaStatisticRTTSum2L
This object specifies the sum of squares of RTT's delay that are successfully measured in Schedule.
This object is applicable to 'Jitter' operation only. (low order 32 bits)
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.8
rcSlaStatisticRTTSum2H
This object specifies the sum of squares of RTT's delay that are successfully measured in Schedule.
This object is applicable to 'Jitter' operation only. (high order 32 bits)
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.9
rcSlaStatisticRTTMin
This object specifies the minimum of RTT's that were successfully measured in Schedule.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.10
rcSlaStatisticRTTMax
This object specifies the maximum of RTT's that were successfully measured in Schedule.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.11
rcSlaStatisticRTTNumSD
This object specifies the number of RTT's probe
that were successfully measured from source to destination in Schedule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.12
rcSlaStatisticRTTSumsSD
This object specifies the sum of RTT's delay
that were successfully measured from source to destination in Schedule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.13
rcSlaStatisticRTTSumJitterSD
This object specifies the number of RTT's jitter that were successfully measured from source to destination in Schedule.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.14
rcSlaStatisticRTTSum2LSD
This object specifies the sum of squares of RTT's delay that are successfully measured from source to destination in Schedule.
This object is applicable to 'Jitter' operation only. (low order 32 bits)
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.15
rcSlaStatisticRTTSum2HSD
This object specifies the sum of squares of RTT's delay that are successfully measured from source to destination in Schedule.
This object is applicable to 'Jitter' operation only. (high order 32 bits)
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.16
rcSlaStatisticRTTMinSD
This object specifies the minimum of RTT's that were successfully measured from source to destination in Schedule.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.17
rcSlaStatisticRTTMaxSD
This object specifies the maximum of RTT's that were successfully measured from source to destination in Schedule.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.18
rcSlaStatisticRTTNumDS
This object specifies the number of RTT's probe
that were successfully measured from destination to source in Schedule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.19
rcSlaStatisticRTTSumsDS
This object specifies the sum of RTT's delay
that were successfully measured from destination to source in Schedule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.20
rcSlaStatisticRTTSumJitterDS
This object specifies the number of RTT's jitter that were successfully measured from destination to source in Schedule.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.21
rcSlaStatisticRTTSum2LDS
This object specifies the sum of squares of RTT's delay that are successfully measured from destination to source in Schedule.
This object is applicable to 'Jitter' operation only. (low order 32 bits)
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.22
rcSlaStatisticRTTSum2HDS
This object specifies the sum of squares of RTT's delay that are successfully measured from destination to source in Schedule.
This object is applicable to 'Jitter' operation only. (hige order 32 bits)
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.23
rcSlaStatisticRTTMinDS
This object specifies the minimum of RTT's that were successfully measured from destination to source in Schedule.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.24
rcSlaStatisticRTTMaxDS
This object specifies the maximum of RTT's that were successfully measured from destination to source in Schedule.
This object is applicable to 'Jitter' operation only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.2.1.25

rcSlaPktlmLatestTable

table
.1.3.6.1.4.1.8886.6.1.36.3.3 · 1 row entry · 15 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlaPktlmLatestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcSlaPktlmLatestTable' 
This table contains the statistics calculated for the 
latest sent frames.
rcSlaPktlmLatestEntry row .1.3.6.1.4.1.8886.6.1.36.3.3.1
A collection of objects that record the latest operation.

An entry is created only when the operation has been set and scheduled.
The entry will start to collect data when rcSlaConfigScheduleStatus
is in '…
Indexes
Column Syntax OID
rcSlaLatestPktlmTXNum
This object specifies the number of packet loss measurement sent in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.1
rcSlaLatestPktlmNum
This object specifies the number of packet loss measurement probe that were successfully measured in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.2
rcSlaLatestPktlmSum
This object specifies the sum of packet loss measurement that were successfully measured in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.3
rcSlaLatestPktlmMin
This object specifies the minimum of packet loss measurement that were successfully measured in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.4
rcSlaLatestPktlmMax
This object specifies the maximum of packet loss measurement that were successfully measured in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.5
rcSlaLatestPktlmNumSD
This object specifies the number of packet loss measurement that were successfully measured from source to destination in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.6
rcSlaLatestPktlmSumSD
This object specifies the sum of packet loss measurement that were successfully measured from source to destination in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.7
rcSlaLatestPktlmMinSD
This object specifies the minimum of packet loss measurement that were successfully measured from source to destination in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.8
rcSlaLatestPktlmMaxSD
This object specifies the maximum of packet loss measurement that were successfully measured from source to destination in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.9
rcSlaLatestPktlmNumDS
This object specifies the number of packet loss measurement that were successfully measured from destination to source in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.10
rcSlaLatestPktlmSumDS
This object specifies the sum of packet loss measurement that were successfully measured from destination to source in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.11
rcSlaLatestPktlmMinDS
This object specifies the minimum of packet loss measurement that were successfully measured from destination to source in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.12
rcSlaLatestPktlmMaxDS
This object specifies the maximum of packet loss measurement that were successfully measured from destination to source in latest test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.13
rcSlaLatestPktlmInterSumSD
This object specifies the sum of packet loss measurement that were successfully measured from destination to source in interval time test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.14
rcSlaLatestPktlmInterSumDS
This object specifies the sum of packet loss measurement that were successfully measured from destination to source in interval time test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.3.1.15

rcSlaPktlmStatisticTable

table
.1.3.6.1.4.1.8886.6.1.36.3.4 · 1 row entry · 16 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlaPktlmStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcSlaPktlmStatisticTable' 
The 'SlaPktlmStatistic' statistics table contains summarized
information of the results for a conceptual control row.
rcSlaPktlmStatisticEntry row .1.3.6.1.4.1.8886.6.1.36.3.4.1
An entry is created only when the operation has been set and scheduled.
The entry will start to collect data when rcSlaConfigScheduleStatus
is in 'active' state. The entry will stop to collect data when the
rcS…
Indexes
Column Syntax OID
rcSlaStatisticPktlmStartTime
This object specifies the time when the operation starts to be scheduled.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.1
rcSlaStatisticPktlmScheduleLife
This object specifies the time duration over the whole schedule process.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.2
rcSlaStatisticPktlmSchedulePeriod
This object specifies the number of packet loss measurement probe that were successfully measured in schedule.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.3
rcSlaStatisticPktlmTXNum
This object specifies the duration between two SLA test
which includes all of probes schedule process in test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.4
rcSlaStatisticPktlmNum
This object specifies the duration between two SLA test
which includes all successful probes schedule process in test.
Take above example, if all of the rcSlaConfigSchedulePeriod of three operations are set to 60,
th…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.5
rcSlaStatisticPktlmSums
This object specifies the sum of packet loss measurement that were successfully measured in schedule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.6
rcSlaStatisticPktlmMin
This object specifies the minimum of packet loss measurement that were successfully measured in Schedule.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.7
rcSlaStatisticPktlmMax
This object specifies the maximum of packet loss measurement that were successfully measured in Schedule.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.8
rcSlaStatistiPktlmNumSD
This object specifies the number of packet loss measurement
that were successfully measured from source to destination in Schedule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.9
rcSlaStatisticPktlmSumsSD
This object specifies the sum of packet loss measurement
that were successfully measured from source to destination in Schedule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.10
rcSlaStatisticPktlmMinSD
This object specifies the minimum of packet loss measurement that were successfully measured from source to destination in Schedule.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.11
rcSlaStatisticPktlmMaxSD
This object specifies the maximum of packet loss measurement that were successfully measured from source to destination in Schedule.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.12
rcSlaStatisticPktlmNumDS
This object specifies the number of packet loss measurement
that were successfully measured from destination to source in Schedule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.13
rcSlaStatisticPktlmSumsDS
This object specifies the sum of packet loss measurement
that were successfully measured from destination to source in Schedule.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.14
rcSlaStatisticPktlmMinDS
This object specifies the minimum of packet loss measurement that were successfully measured from destination to source in Schedule.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.15
rcSlaStatisticPktlmMaxDS
This object specifies the maximum of packet loss measurement that were successfully measured from destination to source in Schedule.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.3.4.1.16

rcSlaThroughputConfigTable

table deprecated
.1.3.6.1.4.1.8886.6.1.36.4.1 · 1 row entry · 14 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlaThroughputConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcSlaThroughputConfigTable' 
This table contains sla  control data.
rcSlaThroughputConfigEntry row .1.3.6.1.4.1.8886.6.1.36.4.1.1
A collection of objects that define three conceptual
control row : slaY.1731EntryTable, slaIcmpEntryTable, slaSchEntryTable.
The 'slaY.1731EntryTable' is used to control y1731 operation .
The following objects must b…
Indexes
Column Syntax OID
rcSlaThroughputIndexdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.1
rcSlaThroughputOperIddeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.2
rcSlaThroughputObjectdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
Unsigned32r/w
Constraints:
range: 125-1000000
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.3
rcSlaThroughputPktLengthdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
Enumerationr/w
Enumerated Values:
0length64
1length128
2length256
3length512
4length1024
5length1280
6length1518
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.4
rcSlaThroughputCountdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.5
rcSlaThroughputDurationdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.6
rcSlaThroughputEnabledeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.7
rcSlaThroughputStatusdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
Enumeration
Enumerated Values:
1throughput-init
2throughput-Active
3throughput-Complete
4throughput-Disturb
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.8
rcSlaThroughputCompleteNumdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.9
rcSlaThroughputFailedNumdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.10
rcSlaThroughputMeasureStartTimedeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.11
rcSlaThroughputMeasureEndTimedeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.12
rcSlaThroughputMeasureLastTimedeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.13
rcSlaThroughputRowStatusdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.36.4.1.1.14

rcSlaThroughputResultTable

table deprecated
.1.3.6.1.4.1.8886.6.1.36.4.2 · 1 row entry · 12 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlaThroughputResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcSlaThroughputResultTable' 
This table contains sla  control data.
rcSlaThroughputResultEntry row .1.3.6.1.4.1.8886.6.1.36.4.2.1
A collection of objects that define three conceptual
control row : slaY.1731EntryTable, slaIcmpEntryTable, slaSchEntryTable.
The 'slaY.1731EntryTable' is used to control y1731 operation .
The following objects must b…
Indexes
Column Syntax OID
rcSlaThroughputResultIddeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.1
rcSlaThroughputTestStartTimedeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.2
rcSlaThroughputTestEndTimedeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.3
rcSlaThroughputTestLastTimedeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.4
rcSlaThroughputLocalSendPStaticsdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.5
rcSlaThroughputLocalSendBStaticsdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.6
rcSlaThroughputLocalReceivePStaticsdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.7
rcSlaThroughputLocalReceiveBStaticsdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.8
rcSlaThroughputRemoteSendPStaticsdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.9
rcSlaThroughputRemoteSendBStaticsdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.10
rcSlaThroughputRemoteReceivePStaticsdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.11
rcSlaThroughputRemoteReceiveBStaticsdeprecated
This object indicates a row in the rcSlaConfigTable.
This value is an operation number configured by user.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.6.1.36.4.2.1.12

rcSlaThresholdTable

table
.1.3.6.1.4.1.8886.6.1.36.5.1 · 1 row entry · 15 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlaThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcSlaThresholdTable' 
This table contains sla trap threshold.
rcSlaThresholdEntry row .1.3.6.1.4.1.8886.6.1.36.5.1.1
The entry of rcSlaThresholdTable.
Indexes
Column Syntax OID
rcSlaTrapOperId
This object indicates a row in the rcSlaThresholdTable.
This value is an operation number configured by user.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.1
rcSlaPktLossRateCurrThreshold
The pkt loss rate threshold of the last test.
Integer32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.3
rcSlaPktLossRateAverThreshold
The average pkt loss rate threshold of all test.
Integer32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.4
rcSlaDelayCurrThreshold
The RTT delay threshold of the last test.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.5
rcSlaDelayCurrThresholdSD
The delay threshold of the last test from source to destination.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.6
rcSlaDelayCurrThresholdDS
The delay threshold of the last test from destination to source.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.7
rcSlaDelayAverThreshold
The RTT average delay threshold of all test.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.8
rcSlaDelayAverThresholdSD
The average delay threshold of all test from source to destination.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.9
rcSlaDelayAverThresholdDS
The average delay threshold of all test from destination to source.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.10
rcSlaJitterCurrThreshold
The RTT jitter threshold of the last test.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.11
rcSlaJitterCurrThresholdSD
The jitter threshold of the last test from source to destination.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.12
rcSlaJitterCurrThresholdDS
The jitter threshold of the last test from destination to source.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.13
rcSlaJitterAverThreshold
The RTT average jitter threshold of all test.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.14
rcSlaJitterAverThresholdSD
The average jitter threshold of all test from source to destination.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.15
rcSlaJitterAverThresholdDS
The average jitter threshold of all test from destination to source.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.1.1.16

rcSlaThresholdTestResultTable

table
.1.3.6.1.4.1.8886.6.1.36.5.2 · 1 row entry · 14 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlaThresholdTestResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcSlaThresholdTestResultTable' 
This table contains sla test result.
rcSlaThresholdTestResultEntry row .1.3.6.1.4.1.8886.6.1.36.5.2.1
The entry of rcSlaThresholdTestResultTable.
Indexes
Column Syntax OID
rcSlaPktCurrLossRate
The pkt loss rate of the last test.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.3
rcSlaPktAverLossRate
The average pkt loss rate of all test.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.4
rcSlaCurrDelay
The RTT delay of the last test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.5
rcSlaCurrDelaySD
The delay of the last test from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.6
rcSlaCurrDelayDS
The delay of the last test from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.7
rcSlaAverDelay
The RTT average delay of all test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.8
rcSlaAverDelaySD
The average delay of all test from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.9
rcSlaAverDelayDS
The average delay of all test from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.10
rcSlaCurrJitter
The RTT jitter of the last test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.11
rcSlaCurrJitterSD
The jitter of the last test from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.12
rcSlaCurrJitterDS
The jitter of the last test from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.13
rcSlaAverJitter
The RTT average jitter of all test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.14
rcSlaAverJitterSD
The average jitter of all test from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.15
rcSlaAverJitterDS
The average jitter of all test from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.5.2.1.16

rcmefSoamLmLastStatsTable

table
.1.3.6.1.4.1.8886.6.1.36.6.1 · 1 row entry · 6 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcmefSoamLmLastStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcmefSoamLmLastStatsTable' 
This table contains the results for last Measurement
Intervals in a SOAM Loss Measurement session.
          
Rows of this table object are created automatically
by the SNMP Agent when the Loss Measurement session is running and a 
Measurement Interval is completed.
          
The rows and objects in this table are to be persistent upon reboot 
or restart of a device.
rcmefSoamLmLastStatsEntry row .1.3.6.1.4.1.8886.6.1.36.6.1.1
The conceptual row of mefSoamLmHistoryStatsTable
Indexes
Column Syntax OID
rcmefSoamPmLastForwardFlr
This object contains the Last frame loss ratio in the
forward direction calculated by this MEP. The FLR value
is a ratio that is expressed as a percent with a value of 0
(ratio 0.00) through 100000 (ratio 1.00).
Uni…
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.8886.6.1.36.6.1.1.1
rcmefSoamPmLastBackwardFlr
This object contains the Last frame loss ratio in the
Backward direction calculated by this MEP. The FLR value
is a ratio that is expressed as a percent with a value of 0
(ratio 0.00) through 100000 (ratio 1.00).
Un…
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.8886.6.1.36.6.1.1.2
rcmefSoamPmLastForwardAvailability
Availability /total time.
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.8886.6.1.36.6.1.1.3
rcmefSoamPmLastBackwardAvailability
Availability /total time.
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.8886.6.1.36.6.1.1.4
rcmefSoamPmLastTwoWayAvailability
Availability /total time.
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.8886.6.1.36.6.1.1.5
rcmefSoamPmLastIngressBandwidth
This object contains the Last Ingress bandwith.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.6.1.36.6.1.1.6

rcmefSoamDmLastStatsTable

table
.1.3.6.1.4.1.8886.6.1.36.6.2 · 1 row entry · 2 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcmefSoamDmLastStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcmefSoamDmLastStatsTable' 
This table contains the results for last Measurement
Intervals in a SOAM Loss Measurement session.
          
Rows of this table object are created automatically
by the SNMP Agent when the Loss Measurement session is running and a 
Measurement Interval is completed.
          
The rows and objects in this table are to be persistent upon reboot 
or restart of a device.
rcmefSoamDmLastStatsEntry row .1.3.6.1.4.1.8886.6.1.36.6.2.1
The conceptual row of mefSoamLmHistoryStatsTable
Indexes
Column Syntax OID
rcmefSoamPmLastFrameDelayTwoWay
This object contains the Last frame delay
in the twoway direction calculated by this MEP.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.6.2.1.1
rcmefSoamPmLastIfdvTwoWay
This object contains the Last inter-frame delay variation
in the twoway direction calculated by this MEP.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.6.2.1.2

rcSlaThresholdProfileTable

table
.1.3.6.1.4.1.8886.6.1.36.8.1 · 1 row entry · 4 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlaThresholdProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcSlaThresholdProfileTable' 
This table contains sla  Threshold data.
rcSlaThresholdProfileEntry row .1.3.6.1.4.1.8886.6.1.36.8.1.1
Information about the profile. This table will create
a profile which only contains its description, the
Threshold of each Profile is defined in the associated
table rcSlaThresholdCfgTable.
Indexes
Column Syntax OID
rcSlaThresholdProfileIndex
An index that uniquely identifies an entry in the sla
profile table.
Unsigned32
Constraints:
range: 1-16
 .1.3.6.1.4.1.8886.6.1.36.8.1.1.1
rcSlaThresholdProfileDescription
Specifies description of profile.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.8886.6.1.36.8.1.1.2
rcSlaThresholdProfileRef
The value descrides how many times the profile is in use.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.8.1.1.3
rcSlaThresholdProfileStatus
the status of rcSlaThresholdProfileTable??
This value is an operation number configured by user
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.36.8.1.1.4

rcSlaThresholdCfgTable

table
.1.3.6.1.4.1.8886.6.1.36.8.2 · 1 row entry · 4 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcSlaThresholdCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-SLA-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-SLA-MIB::rcSlaThresholdCfgTable' 
This table contains information about the profile
rcSlaThresholdCfgEntry row .1.3.6.1.4.1.8886.6.1.36.8.2.1
Information about types of disposal of given protocols. The
entries will be on a per profile, per protocol basis.
Indexes
Column Syntax OID
rcSlaThresholdCfgFd
The Sla Frame delay Threshold
microsecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.8.2.1.1
rcSlaThresholdCfgIfdv
The Ifdv Threshold
microsecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.8.2.1.2
rcSlaThresholdCfgFlr
The Flr Threshold .
milli-percentSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.8.2.1.3
rcSlaThresholdCfgAvailbility
The Availbility Threshold .
milli-percentSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.36.8.2.1.4