RAISECOM-QOS-MIB Table View

A configable table of QOS base on the port of switch.

rcQosPortCfgEntry row .1.3.6.1.4.1.8886.1.33.1.10.1

Table entry for switch qos config based on the port.

Indexes

rcQosPortCfgPortId

Column	Syntax	OID
rcQosPortCfgPortId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.10.1.1
rcQosPortCfgTrust The trust state of ports for which this qos will operates.	Enumerationr/w Enumerated Values: 1 port-priority 2 cos 3 tos 4 dscp 5 cos-inner	.1.3.6.1.4.1.8886.1.33.1.10.1.2
rcQosPortCfgPriority The port's priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.10.1.3
rcQosPortCfgPriorityOverride Is or not to override the port priority.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.33.1.10.1.4
rcQosPortCfgQueueScheduler The port scheduler mode. sp indicates strict priority queue mode. wrr indicates Weighted Round Robin queue mode. drr indicates Deficit Round Robin queue mode. wfq indicates Weighted Fair Queuing queue mode.	Enumerationr/w Enumerated Values: 1 sp 2 wrr 3 drr 4 wfq	.1.3.6.1.4.1.8886.1.33.1.10.1.5
rcQosPortCfgSmacPriorityOverride Indicates the source mac address priority override feature on the port. 0 indicates that both frame priority and queue priority are not overrided; 1 indicates that only frame priority is overrided; 2 indicates that only…	Enumerationr/w Enumerated Values: 0 null 1 frame-priority 2 queue-priority 3 both	.1.3.6.1.4.1.8886.1.33.1.10.1.6
rcQosPortCfgDmacPriorityOverride Indicates the source mac address priority override feature on the port. 0 indicates that both frame priority and queue priority are not overrided; 1 indicates that only frame priority is overrided; 2 indicates that only…	Enumerationr/w Enumerated Values: 0 null 1 frame-priority 2 queue-priority 3 both	.1.3.6.1.4.1.8886.1.33.1.10.1.7
rcQosPortCfgVlanPriorityOverride Indicates the source mac address priority override feature on the port. 0 indicates that both frame priority and queue priority are not overrided; 1 indicates that only frame priority is overrided; 2 indicates that only…	Enumerationr/w Enumerated Values: 0 null 1 frame-priority 2 queue-priority 3 both	.1.3.6.1.4.1.8886.1.33.1.10.1.8
rcQosPortCos2PriProfile Profile index of the port cos to local-priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.10.1.9
rcQosPortTos2PriProfile Profile index of the port tos to local-priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.10.1.10
rcQosPortDscp2PriProfile Profile index of the port dscp to local-priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.10.1.11
rcQosPortDscpMutationProfile Profile index of the port dscp mutation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.10.1.12
rcQosPortCosRemarkProfile Profile index of the port cos remark.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.10.1.13

A configable table of Scheduler Queue base on the port of switch.

rcQosPortSchedulerQueueEntry row .1.3.6.1.4.1.8886.1.33.1.11.1

Table entry for the scheduler queue params

Indexes

rcQosPortSchedulerPortId rcQosPortSchedulerQueueId

Column	Syntax	OID
rcQosPortSchedulerPortId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.11.1.1
rcQosPortSchedulerQueueId the scheduler queue's index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.11.1.2
rcQosPortSchedulerWRR The WRR queue scheduler weight value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.11.1.3
rcQosPortSchedulerDRR The DRR queue scheduler weight value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.11.1.4
rcQosPortSchedulerWFQ The WFQ queue scheduler weight value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.11.1.5

This table describes the mapping from the cos to the local priority.

rcQosLocalPrioMappingEntry row .1.3.6.1.4.1.8886.1.33.1.12.1

Table entry for cos mapping to local priority

Indexes

rcQosLocalPriority

Column	Syntax	OID
rcQosLocalPriority The local priority.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.12.1.1
rcQosQueueId The queue's id.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.12.1.2

This table describes the mapping from the cos to the local priority.

rcQosCosMappingEntry row .1.3.6.1.4.1.8886.1.33.1.13.1

Table entry for cos mapping to local priority

Indexes

rcQosCosValue

Column	Syntax	OID
rcQosCosValue Cos value,the index of rcQosCosMappingEntry.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.13.1.1
rcQosCosLocalPriority The local priority which the cos value mapped to.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.13.1.2
rcQosCosColor The color which the cos value mapped to.	Enumerationr/w Enumerated Values: 0 null 1 green 2 yellow 3 red	.1.3.6.1.4.1.8886.1.33.1.13.1.3

This table describes the mapping from the tos to the local priority.

rcQosTosMappingEntry row .1.3.6.1.4.1.8886.1.33.1.14.1

Table entry for tos mapping to local priority

Indexes

rcQosTosValue

Column	Syntax	OID
rcQosTosValue Tos value,the index of rcQosTosMappingEntry.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.14.1.1
rcQosTosLocalPriority The local priority which the tos value mapped to.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.14.1.2
rcQosTosColor The color which the tos value mapped to.	Enumerationr/w Enumerated Values: 0 null 1 green 2 yellow 3 red	.1.3.6.1.4.1.8886.1.33.1.14.1.3

This table describes the mapping from the DSCP to the local priority.

rcQosDscpMapingEntry row .1.3.6.1.4.1.8886.1.33.1.15.1

Table entry for the DSCP mapping into local priority

Indexes

rcQosDscpValue

Column	Syntax	OID
rcQosDscpValue DSCP value,the index of rcQosDSCPMapingEntry.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.8886.1.33.1.15.1.1
rcQosDscpLocalPriority The local priority which the DSCP value mapped into.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.15.1.2
rcQosDscpColor The color which the dscp value mapped to.	Enumerationr/w Enumerated Values: 0 null 1 green 2 yellow 3 red	.1.3.6.1.4.1.8886.1.33.1.15.1.3

This table describes scheduler queue params.

rcQosSchedulerQueueEntry row .1.3.6.1.4.1.8886.1.33.1.16.1

Table entry for the scheduler queue params

Indexes

rcQosSchedulerQueueId

Column	Syntax	OID
rcQosSchedulerQueueId the scheduler queue's index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.16.1.1
rcQosSchedulerWRR The WRR queue scheduler weight value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.16.1.2
rcQosSchedulerDRR The DRR queue scheduler weight value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.16.1.3
rcQosSchedulerWFQ The WFQ queue scheduler weight value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.16.1.4

This table describes shaping of queues.

rcQosWredTcpConfigEntry row .1.3.6.1.4.1.8886.1.33.1.17.1

Table entry for statistic of queues.

Indexes

rcQosWredQueueId

Column	Syntax	OID
rcQosWredQueueId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.17.1.1
rcQosWredGreenDropStartPoint The green pkt drop start point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.17.1.2
rcQosWredGreenDropEndPoint The green pkt drop end point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.17.1.3
rcQosWredGreenDropProbability The green pkt drop probability.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.17.1.4
rcQosWredYellowDropStartPoint The yellow pkt drop start point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.17.1.5
rcQosWredYellowDropEndPoint The yellow pkt drop end point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.17.1.6
rcQosWredYellowDropProbability The yellow pkt drop probability.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.17.1.7
rcQosWredRedDropStartPoint The red pkt drop start point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.17.1.8
rcQosWredRedDropEndPoint The red pkt drop end point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.17.1.9
rcQosWredRedDropProbability The red pkt drop probability.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.17.1.10
rcQosWredStatus global wred enable/disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.33.1.17.1.11

This table describes shaping of queues .

rcQosPortWredTcpConfigEntry row .1.3.6.1.4.1.8886.1.33.1.18.1

Table entry for statistic of queues

Indexes

rcQosPortWredPortId rcQosPortWredQueueId

Column	Syntax	OID
rcQosPortWredPortId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.18.1.1
rcQosPortWredQueueId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.18.1.2
rcQosPortWredGreenDropStartPoint The green pkt drop start point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.18.1.3
rcQosPortWredGreenDropEndPoint The green pkt drop end point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.18.1.4
rcQosPortWredGreenDropProbability The green pkt drop probability.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.18.1.5
rcQosPortWredYellowDropStartPoint The yellow pkt drop start point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.18.1.6
rcQosPortWredYellowDropEndPoint The yellow pkt drop end point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.18.1.7
rcQosPortWredYellowDropProbability The yellow pkt drop probability.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.18.1.8
rcQosPortWredRedDropStartPoint The red pkt drop start point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.18.1.9
rcQosPortWredRedDropEndPoint The red pkt drop end point.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.18.1.10
rcQosPortWredRedDropProbability The red pkt drop probability.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.18.1.11
rcQosPortWredStatus port wred enable/disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.33.1.18.1.12

This table describes port shaping of queues .

rcQosShapingEntry row .1.3.6.1.4.1.8886.1.33.1.19.1

Table entry for statistic of queues

Indexes

rcQosShapingQueueId

Column	Syntax	OID
rcQosShapingQueueId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.19.1.1
rcQosShapingCir The cir of bandwidth guarantee.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.19.1.2
rcQosShapingCbs The cbs of bandwidth guarantee.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.19.1.3
rcQosShapingPir The pir of bandwidth guarantee.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.19.1.4
rcQosShapingPbs The pbs of bandwidth guarantee.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.19.1.5
rcQosShapingStatus The global bandwidth limit enable/disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.33.1.19.1.6

This table describes shaping of queues .

rcQosPortShapingEntry row .1.3.6.1.4.1.8886.1.33.1.20.1

Table entry for statistic of queues

Indexes

rcQosPortShapingPortId rcQosPortShapingQueueId

Column	Syntax	OID
rcQosPortShapingPortId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.20.1.1
rcQosPortShapingQueueId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.20.1.2
rcQosPortShapingCir The cir of bandwidth guarantee.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.20.1.3
rcQosPortShapingCbs The cbs of bandwidth limit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.20.1.4
rcQosPortShapingPir The pir of bandwidth guarantee.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.20.1.5
rcQosPortShapingPbs The pbs of bandwidth limit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.20.1.6
rcQosPortShapingStatus The port bandwidth limit enable/disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.33.1.20.1.7

This table describes the mapping from the cos to the local priority base on port.

rcQosPortCosMappingEntry row .1.3.6.1.4.1.8886.1.33.1.21.1

Table entry for cos mapping to local priority base on port

Indexes

rcQosPortCosPortId rcQosPortCosValue

Column	Syntax	OID
rcQosPortCosPortId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.21.1.1
rcQosPortCosValue Cos value,the index of rcQosPortCosMappingTable.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.21.1.2
rcQosPortCosLocalPriority The local priority which the cos value mapped to base on port.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.21.1.3
rcQosPortCosColor The color which the cos value mapped to base on port.	Enumerationr/w Enumerated Values: 0 null 1 green 2 yellow 3 red	.1.3.6.1.4.1.8886.1.33.1.21.1.4

This table describes the mapping from the tos to the local priority.

rcQosPortTosMappingEntry row .1.3.6.1.4.1.8886.1.33.1.22.1

Table entry for tos mapping to local priority

Indexes

rcQosPortTosPortId rcQosPortTosValue

Column	Syntax	OID
rcQosPortTosPortId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.22.1.1
rcQosPortTosValue Tos value,the index of rcQosTosMappingEntry.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.22.1.2
rcQosPortTosLocalPriority The local priority which the tos value mapped to.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.22.1.3
rcQosPortTosColor The color which the tos value mapped to.	Enumerationr/w Enumerated Values: 0 null 1 green 2 yellow 3 red	.1.3.6.1.4.1.8886.1.33.1.22.1.4

This table describes the mapping from the DSCP to the local priority.

rcQosPortDscpMapingEntry row .1.3.6.1.4.1.8886.1.33.1.23.1

Table entry for the DSCP mapping into local priority

Indexes

rcQosPortDscpPortId rcQosPortDscpValue

Column	Syntax	OID
rcQosPortDscpPortId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.23.1.1
rcQosPortDscpValue DSCP value,the index of rcQosDSCPMapingEntry.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.8886.1.33.1.23.1.2
rcQosPortDscpLocalPriority The local priority which the DSCP value mapped into.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.23.1.3
rcQosPortDscpColor The color which the dscp value mapped to.	Enumerationr/w Enumerated Values: 0 null 1 green 2 yellow 3 red	.1.3.6.1.4.1.8886.1.33.1.23.1.4

This table describes statistic of queues .

rcQosPortDropPktsStatisticEntry row .1.3.6.1.4.1.8886.1.33.1.24.1

Table entry for stati stic of queues

Indexes

rcQosPortStatisticsPortId rcQosPortStatisticsQueueId

Column	Syntax	OID
rcQosPortStatisticsPortId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.24.1.1
rcQosPortStatisticsQueueId An index that uniquely identifies a configuration about qos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.24.1.2
rcQosPortStatisticsDropPkts The number of drop pkt statistic by packet.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8886.1.33.1.24.1.3
rcQosPortStatisticsDropBytes The number of drop pkt statistic by byte.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8886.1.33.1.24.1.4
rcQosPortStatisticsDropUnit the unit of the drop pkt statistic .	Enumeration Enumerated Values: 0 packets 1 bytes	.1.3.6.1.4.1.8886.1.33.1.24.1.5
rcQosPortStatisticsClear Is or not to clear drop statistic.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.33.1.24.1.6

Mapping table of CoS value in packet to device priority.

rcQosMappingCosToPriEntry row .1.3.6.1.4.1.8886.1.33.1.25.1

Table entry for mapping table of CoS value in packet to device priority.

Indexes

rcQosCosToPriIndex rcQosCosToPriCos

Column	Syntax	OID
rcQosCosToPriIndex Index of CoS to priority map.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.8886.1.33.1.25.1.1
rcQosCosToPriCos CoS value of the CoS to priority map, index of CoS to priority map.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.25.1.2
rcQosCosToPriLpri Device local priority value.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.25.1.3
rcQosCosToPriColor Device drop priority value.	Enumerationr/w Enumerated Values: 1 green 2 yellow 3 red	.1.3.6.1.4.1.8886.1.33.1.25.1.4
rcQosCosToPriDesc Profile description.	SWITCH-TCObjNamer/w Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.1.25.1.5
rcQosCosToPriRef References count of this table entry.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.25.1.6
rcQosCosToPriStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.1.25.1.7

Mapping table of TOS value in packet to device priority.

rcQosMappingTosToPriEntry row .1.3.6.1.4.1.8886.1.33.1.26.1

Table entry for mapping table of TOS value in packet to device priority.

Indexes

rcQosTosToPriIndex rcQosTosToPriTos

Column	Syntax	OID
rcQosTosToPriIndex Index of TOS to priority map.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.8886.1.33.1.26.1.1
rcQosTosToPriTos TOS value of the TOS to priority map, index of TOS to priority map.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.26.1.2
rcQosTosToPriLpri Local priority value.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.26.1.3
rcQosTosToPriColor Drop priority value.	Enumerationr/w Enumerated Values: 1 green 2 yellow 3 red	.1.3.6.1.4.1.8886.1.33.1.26.1.4
rcQosTosToPriDesc Profile description.	SWITCH-TCObjNamer/w Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.1.26.1.5
rcQosTosToPriRef References count of this table entry.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.26.1.6
rcQosTosToPriStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.1.26.1.7

Mapping table of DSCP value in packet to device priority.

rcQosMappingDscpToPriEntry row .1.3.6.1.4.1.8886.1.33.1.27.1

Table entry for mapping table of DSCP value in packet to device priority.

Indexes

rcQosDscpToPriIndex rcQosDscpToPriDscp

Column	Syntax	OID
rcQosDscpToPriIndex Index of DSCP to priority map.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.8886.1.33.1.27.1.1
rcQosDscpToPriDscp DSCP value of the DSCP to priority map,index of DSCP to priority map.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.8886.1.33.1.27.1.2
rcQosDscpToPriLpri Local priority value.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.27.1.3
rcQosDscpToPriColor Drop priority value.	Enumerationr/w Enumerated Values: 1 green 2 yellow 3 red	.1.3.6.1.4.1.8886.1.33.1.27.1.4
rcQosDscpToPriDesc Profile description.	SWITCH-TCObjNamer/w Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.1.27.1.5
rcQosDscpToPriRef References count of this table entry.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.27.1.6
rcQosDscpToPriStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.1.27.1.7

Mapping table of DSCP value to new DSCP value in packet.

rcQosMappingDscpMutationEntry row .1.3.6.1.4.1.8886.1.33.1.28.1

Table entry for mapping table of DSCP value to new DSCP in packet.

Indexes

rcQosDscpMutationIndex rcQosDscpMutationDscp

Column	Syntax	OID
rcQosDscpMutationIndex Index of DSCP to DSCP map.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.8886.1.33.1.28.1.1
rcQosDscpMutationDscp Index of DSCP to DSCP map.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.8886.1.33.1.28.1.2
rcQosDscpMutationNewDscp Dscp value.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.8886.1.33.1.28.1.3
rcQosDscpMutationDesc Profile description.	SWITCH-TCObjNamer/w Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.1.28.1.4
rcQosDscpMutationRef References count of this table entry.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.28.1.5
rcQosDscpMutationStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.1.28.1.6

Mapping table of device local priority to CoS value in packet.

rcQosMappingCosRemarkEntry row .1.3.6.1.4.1.8886.1.33.1.29.1

Table entry for mapping table of local priority to CoS value in packet.

Indexes

rcQosCosRemarkIndex rcQosCosRemarkLpri

Column	Syntax	OID
rcQosCosRemarkIndex Index of local priority to CoS value map.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.8886.1.33.1.29.1.1
rcQosCosRemarkLpri Index of local priority to CoS value map.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.29.1.2
rcQosCosRemarkCos CoS value.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.1.29.1.3
rcQosCosRemarkDesc Profile description.	SWITCH-TCObjNamer/w Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.1.29.1.4
rcQosCosRemarkRef References count of this table entry.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.29.1.5
rcQosCosRemarkStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.1.29.1.6

Random detect table.

rcQosWredProfileEntry row .1.3.6.1.4.1.8886.1.33.1.30.1

Random detect table, the entry of this table.

Indexes

rcQosWredProfileIndex

Column	Syntax	OID
rcQosWredProfileIndex wred table name, it's the index of this table.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.8886.1.33.1.30.1.1
rcQosWredProfileGreenDropStartPoint wred minimum threshold value for green packet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.30.1.2
rcQosWredProfileGreenDropEndPoint wred maximum threshold value for green packet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.30.1.3
rcQosWredProfileGreenDropProbability wred maximum drop probability value for green packet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.30.1.4
rcQosWredProfileYellowDropStartPoint wred minimum threshold value for yellow packet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.30.1.5
rcQosWredProfileYellowDropEndPoint wred maximum threshold value for yellow packet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.30.1.6
rcQosWredProfileYellowDropProbability wred maximum drop probability value for yellow packet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.30.1.7
rcQosWredProfileRedDropStartPoint wred minimum threshold value for red packet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.30.1.8
rcQosWredProfileRedDropEndPoint wred maximum threshold value for red packet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.30.1.9
rcQosWredProfileRedDropProbability wred maximum drop probability value for red packet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.30.1.10
rcQosWredProfileDesc Profile description.	SWITCH-TCObjNamer/w Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.1.30.1.11
rcQosWredProfileRef wred table references count.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.30.1.12
rcQosWredProfileStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.1.30.1.13

Wred profile applied global.

rcQosGloWredProfileEntry row .1.3.6.1.4.1.8886.1.33.1.31.1

Table entry for global apply wred profile.

Indexes

rcQosGloWredProfileQueueId

Column	Syntax	OID
rcQosGloWredProfileQueueId Index of global apply wred profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.31.1.1
rcQosGloWredProfileIndex Index of the applied wred profile.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.8886.1.33.1.31.1.2
rcQosGloWredProfileStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.1.31.1.3

Wred profile applied on port.

rcQosPortWredProfileEntry row .1.3.6.1.4.1.8886.1.33.1.32.1

Table entry for port apply wred profile.

Indexes

rcQosPortWredProfilePortId rcQosPortWredProfileQueueId

Column	Syntax	OID
rcQosPortWredProfilePortId Port Index of port apply wred profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.32.1.1
rcQosPortWredProfileQueueId Queue index of port apply wred profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.1.32.1.2
rcQosPortWredProfileIndex Index of the applied wred profile.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.8886.1.33.1.32.1.3
rcQosPortWredProfileStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.1.32.1.4

This table describes the interfaces/media types and the 
policymap that are attached to it.

rcQosServicePolicyEntry row .1.3.6.1.4.1.8886.1.33.2.2.1

Table entry for QOS service policy. Each entry in this table
describes to which a port a given policymap is attached.

Indexes

rcQosServicePolicyIngress

Column	Syntax	OID
rcQosServicePolicyIngress The ingress ports that the service policy will apply on.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.2.1.1
rcQosServicePolicyEgress The egress ports that the service policy will apply on.	SWITCH-TCPortListr/w Type Constraints: range: 32	.1.3.6.1.4.1.8886.1.33.2.2.1.2
rcQosServicePolicyMapName the name of policy map.	SWITCH-TCObjNamer/w Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.2.2.1.3
rcQosServicePolicyStatus the status of policy map.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.2.1.4

This table specifies Policymap configuration information.

rcQosPolicyMapCfgEntry row .1.3.6.1.4.1.8886.1.33.2.3.1

Table entry for QOS policy map.

Indexes

rcQosPolicyMapName

Column	Syntax	OID
rcQosPolicyMapName the name of policy map,which is the index of policy map entry.	SWITCH-TCObjName Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.2.3.1.1
rcQosPolicyMapDesc the description of policy map.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.8886.1.33.2.3.1.2
rcQosPolicyMapCfgStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.3.1.3
rcQosPolicyMapType the type of policy map.	Enumerationr/w Enumerated Values: 1 policy-map 2 vlan-policy-map 3 cos-policy-map 4 pw-policy-map	.1.3.6.1.4.1.8886.1.33.2.3.1.4

This table specifies ClassMap configuration information.

rcQosCMCfgEntry row .1.3.6.1.4.1.8886.1.33.2.4.1

Each entry in this table describes configuration information
about a classmap. The information includes: Name, and it's
description and whether it is a Mathc-All or Match-Any
class,and so on.

Indexes

rcQosCMName

Column	Syntax	OID
rcQosCMName the name of class map,which is the index of class map entry.	SWITCH-TCObjName Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.2.4.1.1
rcQosCMDesc the description of class map.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.8886.1.33.2.4.1.2
rcQosCMMatchType Match all vs Match any in a given class.matchAll(1) indicates all match 'AND', matchAny(2) indicates all match 'OR'.	Enumerationr/w Enumerated Values: 1 matchAll 2 matchAny	.1.3.6.1.4.1.8886.1.33.2.4.1.3
rcQosCMClassID the class map id.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.4.1.4
rcQosCMStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.4.1.5
rcQosCMDoubleTaggingdeprecated Double tagging mode, true or false.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.33.2.4.1.6

A table of QOS match statement, which is attached to class map.

rcQosMatchStmtEntry row .1.3.6.1.4.1.8886.1.33.2.5.1

Table entry for QOS match statement.

Indexes

rcQosMatchStmtClassName rcQosMatchStmtType rcQosMatchStmtValue

Column	Syntax	OID
rcQosMatchStmtClassName the name of calss map.	SWITCH-TCObjName Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.2.5.1.1
rcQosMatchStmtType the type of the match statement,include ip acl,mac acl and user acl, and dscp or ip precedence.	Enumeration Enumerated Values: 1 ip-acl 2 mac-acl 3 user-acl 4 dscp 5 ipprecedence 6 class 7 vlan 8 vlan-inner 9 cos 10 ipv6-acl 11 traffic-class 12 inner-outer-vlan 13 tunnel-label 14 tunnel-exp 15 vc-label 16 vc-exp 17 flow-label	.1.3.6.1.4.1.8886.1.33.2.5.1.2
rcQosMatchStmtValue the number of the ACL, or the value of dscp or ip precedence.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.8886.1.33.2.5.1.3
rcQosMatchStmtSubName the name of sub-calss map.	SWITCH-TCObjName Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.2.5.1.4
rcQosMatchStmtStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.5.1.5

A class specifying policing parameters for both microflows
and aggregate flows.  This table is designed for policing
according to a token bucket scheme where an average rate and
burst size is specified.

rcQosPolicerCfgEntry row .1.3.6.1.4.1.8886.1.33.2.6.1

An instance of this class specifies a set of policing parameters.

Indexes

rcQosPolicerCfgName

Column	Syntax	OID
rcQosPolicerCfgName the name of the policer,which is index of table.	SWITCH-TCObjName Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.2.6.1.1
rcQosPolicerCfgType It indicates the token bucket for the policer. single-policer(1) means that a token bucket is assigned to a 'match' item. class-policer(2) means that all 'match'items share a single token bucket. aggregate-policer(3)m…	Enumerationr/w Enumerated Values: 1 single-policer 2 class-policer 3 aggregate-policer 4 hierarchy-policer	.1.3.6.1.4.1.8886.1.33.2.6.1.2
rcQosPolicerCfgMode It indicates the policer's work mode ,or structure.	Enumerationr/w Enumerated Values: 1 flow 2 rfc2697 3 rfc2698 4 rfc4115 5 mef 6 single 7 double	.1.3.6.1.4.1.8886.1.33.2.6.1.3
rcQosPolicerCfgCIR It indicates the base buckets rate. Its unit is kbps.	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.8886.1.33.2.6.1.4
rcQosPolicerCfgEIR It indicates the extended buckets rate. Its unit is kbps.	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.8886.1.33.2.6.1.5
rcQosPolicerCfgCBS It indicates the base buckets capacity??Its unit is KB.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.6.1.6
rcQosPolicerCfgEBS It indicates the extended buckets capacity. Its unit is KB.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.6.1.7
rcQosPolicerGreenActType It indicates the action type of green packets.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.6.1.8
rcQosPolicerGreenActDscp It indicates the value of rcQosPolicerGreenActDscp, the range is 0-63.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.8886.1.33.2.6.1.9
rcQosPolicerGreenActCos It indicates the value of rcQosPolicerGreenActCos, the range is 0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.2.6.1.10
rcQosPolicerGreenActLocalPrio It indicates the value of rcQosPolicerGreenActLocalPrio, the range is 0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.2.6.1.11
rcQosPolicerGreenActColor It indicates that if traffic is already marked green and it exceed the bucket's limits, the traffic is remarked to this color.	Enumerationr/w Enumerated Values: 0 none 1 yellow 2 red	.1.3.6.1.4.1.8886.1.33.2.6.1.12
rcQosPolicerGreenActCopytoCpu It indicates that if traffic is already marked green and it exceed the bucket's limits, the traffic is transmit to CPU or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.33.2.6.1.13
rcQosPolicerYellowActType It indicates the action type of yellow packets.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.6.1.14
rcQosPolicerYellowActDscp It indicates the value of rcQosPolicerYellowActDscp, the range is 0-63.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.8886.1.33.2.6.1.15
rcQosPolicerYellowActCos It indicates the value of rcQosPolicerYellowActCos, the range is 0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.2.6.1.16
rcQosPolicerYellowActLocalPrio It indicates the value of rcQosPolicerYellowActLocalPrio, the range is 0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.2.6.1.17
rcQosPolicerYellowActColor It indicates that if traffic is already marked yellow and it exceed the bucket's limits, the traffic is remarked to this color.	Enumerationr/w Enumerated Values: 0 none 1 green 2 red	.1.3.6.1.4.1.8886.1.33.2.6.1.18
rcQosPolicerYellowActCopytoCpu It indicates that if traffic is already marked yellow and it exceed the bucket's limits, the traffic is transmit to CPU or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.33.2.6.1.19
rcQosPolicerRedActType It indicates the action type of red packets.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.6.1.20
rcQosPolicerRedActDscp It indicates the value of rcQosPolicerRedActDscp, the range is 0-63.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.8886.1.33.2.6.1.21
rcQosPolicerRedActCos It indicates the value of rcQosPolicerRedActCos, the range is 0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.2.6.1.22
rcQosPolicerRedActLocalPrio It indicates the value of rcQosPolicerRedActLocalPrio, the range is 0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.33.2.6.1.23
rcQosPolicerRedActColor It indicates that if traffic is already marked red and it exceed the bucket's limits, the traffic is remarked to this color.	Enumerationr/w Enumerated Values: 0 none 1 green 2 yellow	.1.3.6.1.4.1.8886.1.33.2.6.1.24
rcQosPolicerRedActCopytoCpu It indicates that if traffic is already marked red and it exceed the bucket's limits, the traffic is transmit to CPU or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.33.2.6.1.25
rcQosPolicerColorMode It indicates that whether the bucket is aware to traffic's color. if color-bind, the bucket does not care of traffic's color marked. if color-aware, the bucket will take care of the color of the traffic already marked.	Enumerationr/w Enumerated Values: 0 color-blind 1 color-aware	.1.3.6.1.4.1.8886.1.33.2.6.1.26
rcQoSPolicerRef It indicates the number of citation counts used by policy-map.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.6.1.27
rcQosPolicerStatus Row status of policer.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.6.1.28

This table specifies ClassMap SET configuration information.

rcQosActionCfgEntry row .1.3.6.1.4.1.8886.1.33.2.7.1

An instance of this class specifies a set of policing parameters.

Indexes

rcQosActionPmapName rcQosActionCmapName

Column	Syntax	OID
rcQosActionPmapName It indicates the policy's name.	SWITCH-TCObjName Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.2.7.1.1
rcQosActionCmapName It indicates the class name which associates with the policy.	SWITCH-TCObjName Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.2.7.1.2
rcQosActionType The trust or set type of traffic class.You can use it to config action type.	Enumerationr/w Enumerated Values: 0 none 1 set-dscp 2 set-cos 3 set-ipprec	.1.3.6.1.4.1.8886.1.33.2.7.1.3
rcQosActionSetValue the remarking cos ,ip precedence or dscp value in traffic class.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.8886.1.33.2.7.1.4
rcQosActionPoliceName the name of policer,which is attached to the class map entry.	SWITCH-TCObjNamer/w Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.2.7.1.5
rcQosActionStatsEnable Indicates whether the QoS statistics is enabled on the calss map and policy map.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.33.2.7.1.6
rcQosActionStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.7.1.7
rcQosActionRedirectPort The egress port to which the packets are redirected to. don't redirect to port when the port is zero.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.7.1.8
rcQosActionSetVlan VLAN Rewrite. if the value is not zero,then the VID(12 bits) in the packet is replaced by this value.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.8886.1.33.2.7.1.9
rcQosActionSetInnerVlan Inner VLAN Rewrite. if the value is not zero,then the VID(12 bits) in the packet is replaced by this value.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.8886.1.33.2.7.1.10
rcQosActionAddOuterVlan VLAN to add. if the value is not zero,then the VID(12 bits) in the packet is added by this value.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.8886.1.33.2.7.1.11
rcQosActionCopyToMirror If the value is true and the mirror is enable,then the packet is copy to the mirror-to port.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.33.2.7.1.12
rcQosActionMirrorToPort The destination port to mirror to.The packet is copy to this port after you configuration.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.7.1.13
rcQosActionSetLocalPriority The local priority to rewrite after policy.The local priority is used by queue and scheduler directly.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.8886.1.33.2.7.1.14
rcQosActionHierarchyPoliceName the name of hierarchy policer,which is attached to the class map entry.	SWITCH-TCObjNamer/w Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.2.7.1.15
rcQosActionSetIpPrece The IP precedence to set after policy.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.8886.1.33.2.7.1.16
rcQosActionSetIpDscp The IP dscp to set after policy.	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.8886.1.33.2.7.1.17
rcQosActionSetCos The Cos to set after policy.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.8886.1.33.2.7.1.18
rcQosActionSetIPAddressType The type of Internet address for all the objects with SYNTAX InetAddress and in this entry.	Integer32r/w Constraints: range: 0-16	.1.3.6.1.4.1.8886.1.33.2.7.1.19
rcQosActionSetIPAddress identifying a IP address set after policy.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.8886.1.33.2.7.1.20
rcQosActionCopyToMirrorSession The destination Session to mirror to.The packet is copy to this Session after you configuration.	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.8886.1.33.2.7.1.21

This table describes the egress types and the 
policymap that are attached to it.

rcQosServicePolicyEgressEntry row .1.3.6.1.4.1.8886.1.33.2.8.1

Table entry for QOS service policy. Each entry in this table
describes to which an egress a given policymap is attached.

Indexes

rcQosServicePolicyEgressIndex

Column	Syntax	OID
rcQosServicePolicyEgressIndex The egress ports that the service policy will apply on.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.8.1.1
rcQosServicePolicyEgressMapName the name of policy map.	SWITCH-TCObjNamer/w Type Constraints: range: 16	.1.3.6.1.4.1.8886.1.33.2.8.1.2
rcQosServicePolicyEgressStatus the status of policy map.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.8.1.3

This table describes the interfaces/media types ,vlan and the 
policymap that are attached to it.

rcQosCosServicePolicyEntry row .1.3.6.1.4.1.8886.1.33.2.9.1

Table entry for QOS service cos policy. Each entry in this table
describes to which a port and which vlan a given policymap is attached.

Indexes

rcQosCosServicePolicyPort rcQosCosServicePolicyVlan

Column	Syntax	OID
rcQosCosServicePolicyPort The ingress ports that the cos service policy will apply on.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.9.1.1
rcQosCosServicePolicyVlan The outer vlan that the cos service policy will apply on.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.9.1.2
rcQosCosServicePolicyMapName the name of cos policy map.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.8886.1.33.2.9.1.3
rcQosCosServicePolicyRowStatus the status of service cos policy-map table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.9.1.4

This table specifies vlan policy map SET configuration information.

rcQosVlanPolicyEntry row .1.3.6.1.4.1.8886.1.33.2.10.1

An instance of this class specifies a set of policing parameters.

Indexes

rcQosVlanPolicyPmapName rcQosVlanPolicyVlan

Column	Syntax	OID
rcQosVlanPolicyPmapName It indicates the vlan policy's name.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.8886.1.33.2.10.1.1
rcQosVlanPolicyVlan It indicates the vlan. It means setting hierarchy policer when vlan is 0.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.8886.1.33.2.10.1.2
rcQosVlanPolicyPolicerName It indicates the policer name which associates with the policy.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.8886.1.33.2.10.1.3
rcQosVlanPolicyRowStatus the status of vlan policy table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.10.1.4

This table specifies cos policy map SET configuration information.

rcQosCosPolicyEntry row .1.3.6.1.4.1.8886.1.33.2.11.1

An instance of this class specifies a set of policing parameters.

Indexes

rcQosCosPolicyPmapName rcQosCosPolicyCos

Column	Syntax	OID
rcQosCosPolicyPmapName It indicates the cos policy's name.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.8886.1.33.2.11.1.1
rcQosCosPolicyCos It indicates the cos. It means setting hierarchy policer when cos is 8.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.8886.1.33.2.11.1.2
rcQosCosPolicyPolicerName It indicates the policer name which associates with the policy.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.8886.1.33.2.11.1.3
rcQosCosPolicyRowStatus the status of cos policy table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.11.1.4

A class specifying bandwidth-profile parameters for both microflows
and aggregate flows.  This table is designed for bandwidth
according to a token bucket scheme where an average rate and
burst size is specified.

rcQosBandwidthProfileCfgEntry row .1.3.6.1.4.1.8886.1.33.2.12.1

An instance of this class specifies a set of bandwidth-profile parameters.

Indexes

rcQosBandwidthProfileCfgIndex

Column	Syntax	OID
rcQosBandwidthProfileCfgIndex The index of the bandwidth-profile,which is index of table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.12.1.1
rcQosBandwidthProfileCfgCIR It indicates the base buckets rate. Its unit is kbps.	Integer32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.8886.1.33.2.12.1.2
rcQosBandwidthProfileCfgEIR It indicates the extended buckets rate. Its unit is kbps.	Integer32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.8886.1.33.2.12.1.3
rcQosBandwidthProfileCfgCBS It indicates the base buckets capacity??Its unit is KB.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.12.1.4
rcQosBandwidthProfileCfgEBS It indicates the extended buckets capacity. Its unit is KB.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.12.1.5
rcQosBandwidthProfileColorMode It indicates that whether the bucket is aware to traffic's color. if color-bind, the bucket does not care of traffic's color marked. if color-aware, the bucket will take care of the color of the traffic already marked.	Enumerationr/w Enumerated Values: 0 color-blind 1 color-aware	.1.3.6.1.4.1.8886.1.33.2.12.1.6
rcQosBandwidthProfileCoupling It indicates that whether the bucket is enable to traffic's coupling. if disable, the yellow traffic is bounded by eir. if enable,yellow traffic is bounded by CIR + EIR, depending on the volume of pre-colored green fr…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.33.2.12.1.7
rcQoSBandwidthProfileRef It indicates the number of citation counts used by bandwidth-profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.12.1.8
rcQosBandwidthProfileStatus Row status of bandwidth-profile.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.12.1.9
rcQosBandwidthProfileDesc the description of bandwidth-profile.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.8886.1.33.2.12.1.10

This table specifies Hierarchy-cos configuration information.

rcQosHierarchyCosIndexCfgEntry row .1.3.6.1.4.1.8886.1.33.2.13.1

Table entry for bandwidth hierarchy-cos.

Indexes

rcQosHierarchyCosIndex

Column	Syntax	OID
rcQosHierarchyCosIndex The index is hierarchy-cos,which is the index of hierarchy-cos entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.13.1.1
rcQosHierarchyCosRef It indicates the number of citation counts used by hierarchy-cos.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.13.1.2
rcQosHierarchyCosCfgStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.13.1.3
rcQosHierarchyCosCfgDesc the description of H-cos bandwidth table.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.8886.1.33.2.13.1.4

This table specifies hierarchy cos bandwidth SET configuration information.

rcQosHCosBandwidthProfileEntry row .1.3.6.1.4.1.8886.1.33.2.14.1

An instance of this class specifies a set of H-cos bandwidth parameters.

Indexes

rcQosHCosBandwidthProfileIndex rcQosHCosBandwidthProfileCos

Column	Syntax	OID
rcQosHCosBandwidthProfileIndex It indicates the H-cos bandwidth's index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.14.1.1
rcQosHCosBandwidthProfileCos It indicates the cos. It means setting hierarchy bandwidth when cos is 8.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.8886.1.33.2.14.1.2
rcQosHCosBandwidthProfileBwpIndex It indicates the bandwidth name which associates with the bandwidth-profile.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.14.1.3
rcQoSHCosBandwidthProfileRef It indicates the number of citation counts used by H-cos bandwidth-profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.33.2.14.1.4
rcQosHCosBandwidthProfileRowStatus the status of H-cos bandwidth table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.33.2.14.1.5