RAISECOM-OPTICAL-MONITOR-MIB Table View

This table provides objects to monitor optical
parameters in a network element.

raisecomOpticalMonEntry row .1.3.6.1.4.1.8886.1.9.1.1.1.1

An entry in the raisecomOpticalMonTable provides objects to
monitor an optical parameter at an optical interface.

Indexes

IF-MIBifIndex raisecomOpticalMonParameterType

Column	Syntax	OID
raisecomOpticalMonParameterType This object specifies the optical parameter that is being monitored in this entry.	OpticalParameterType Type Values: 1 temperature 2 supplyVoltage 3 biasCurrent 4 txOutputPower 5 receivedPower Description: This value indicates the optical parameter that is being monitored. Valid values are - temperature(1) supplyVoltage(2) biasCurrent(3) txOutputPower(4) receivedPower(5)	.1.3.6.1.4.1.8886.1.9.1.1.1.1.1
raisecomOpticalParameterValue This object gives the value measured for the particular optical parameter specified by the raisecomOpticalMonParameterType object.	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.1.1.1.2
raisecomOpticalParamHighAlarmThresh This object gives the high alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpticalParameterValue goes from below the value of thi…	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.1.1.1.3
raisecomOpticalParamHighWarningThresh This object is used to set a high warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value given by raisecomOpticalParameterValue goes from…	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.1.1.1.4
raisecomOpticalParamLowAlarmThresh This object is used to set a low alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpticalParameterValue goes from above the value o…	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.1.1.1.5
raisecomOpticalParamLowWarningThresh This object is used to set a low warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value given by raisecomOpticalParameterValue goes from …	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.1.1.1.6
raisecomOpticalParamAlarmStatus This object is used to indicate the current status of the thresholds for the monitored optical parameter on the interface. If a threshold is currently being exceeded on the interface, the object …	Enumeration Enumerated Values: 0 none 1 high-alarm-threshold 2 high-warning-threshold 3 low-alarm-threshold 4 low-warning-threshold	.1.3.6.1.4.1.8886.1.9.1.1.1.1.7
raisecomOpticalParamAlarmLastValue This object indicates the optical parameter value at the last time a threshold related to a particular optical parameter was exceeded on the interface. If no threshold value is currently being exceeded, then the value '…	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.1.1.1.8
raisecomOpticalParamAlarmLastChange This object specifies the value of sysUpTime at the last time a threshold related to a particular optical parameter was exceeded on the interface.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.9.1.1.1.1.9
raisecomOpticalMon15MinValidIntervals This object gives the number of previous 15 minute intervals for which valid performance monitoring data has been stored on the interface. The value of this object will be n (where n is the maximum number…	Unsigned32 Constraints: range: 0-96	.1.3.6.1.4.1.8886.1.9.1.1.1.1.10
raisecomOpticalMon24HrValidIntervals This object gives the number of previous 24 hour intervals for which valid performance monitoring data has been stored on the interface. The value of this object will be 0 if the measurement was (re-)star…	Unsigned32 Constraints: range: 0-1	.1.3.6.1.4.1.8886.1.9.1.1.1.1.11
raisecomOpticalMonValidStatus This object indicates the parameter row is valid or not.	Enumeration Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.8886.1.9.1.1.1.1.12

This table contains performance monitoring data for the
various optical parameters, collected over the current 15
minute or the current 24 hour interval.

raisecomOpticalPMCurrentEntry row .1.3.6.1.4.1.8886.1.9.1.2.1.1

An entry in the raisecomOpticalPMCurrentTable. It contains
performance monitoring data for a monitored optical
parameter at an interface, collected over the current 15
minute or the current 24 hour interval.

Indexes

IF-MIBifIndex raisecomOpticalPMCurrentPeriod raisecomOpticalPMCurrentParamType

Column	Syntax	OID
raisecomOpticalPMCurrentPeriod This object indicates whether the optical parameter values given in this entry are collected over the current 15 minute or the current 24 hour interval.	OpticalPMPeriod Type Values: 1 fifteenMin 2 twentyFourHour Description: This value indicates the time period over which performance monitoring data has been collected.	.1.3.6.1.4.1.8886.1.9.1.2.1.1.1
raisecomOpticalPMCurrentParamType This object specifies the optical parameter that is being monitored, in this entry.	OpticalParameterType Type Values: 1 temperature 2 supplyVoltage 3 biasCurrent 4 txOutputPower 5 receivedPower Description: This value indicates the optical parameter that is being monitored. Valid values are - temperature(1) supplyVoltage(2) biasCurrent(3) txOutputPower(4) receivedPower(5)	.1.3.6.1.4.1.8886.1.9.1.2.1.1.2
raisecomOpticalPMCurrentMaxParam This object gives the maximum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.2.1.1.3
raisecomOpticalPMCurrentMinParam This object gives the minimum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.2.1.1.4
raisecomOpticalPMCurrentMeanParam This object gives the average value of the monitored optical parameter, in the current 15 minute or the current 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.2.1.1.5

This table stores performance monitoring data for the
various optical parameters, collected over previous
intervals.
          
This table can have entries for one complete 24 hour
interval and up to 96 complete 15 minute
intervals. A system is required to store at least
4 completed 15 minute intervals. The number of valid
15 minute intervals in this table is indicated by the
cOpticalMon15MinValidIntervals object and the number of
valid 24 hour intervals is indicated by the
cOpticalMon24HrValidIntervals object.

raisecomOpticalPMIntervalEntry row .1.3.6.1.4.1.8886.1.9.1.2.2.1

An entry in the raisecomOpticalPMIntervalTable. It contains
performance monitoring data for an optical parameter,
collected over a previous interval.

Indexes

IF-MIBifIndex raisecomOpticalPMIntervalPeriod raisecomOpticalPMIntervalNumber raisecomOpticalPMIntervalParamType

Column	Syntax	OID
raisecomOpticalPMIntervalPeriod This object indicates whether the optical parameter values, given in this entry, are collected over a period of 15 minutes or 24 hours.	OpticalPMPeriod Type Values: 1 fifteenMin 2 twentyFourHour Description: This value indicates the time period over which performance monitoring data has been collected.	.1.3.6.1.4.1.8886.1.9.1.2.2.1.1
raisecomOpticalPMIntervalNumber A number between 1 and 96, which identifies the interval for which the set of optical parameter values is available. The interval identified by 1 is the most recently completed 15 minute or 24 hour interval, and the int…	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.8886.1.9.1.2.2.1.2
raisecomOpticalPMIntervalParamType This object specifies the optical parameter that is being monitored, in this entry.	OpticalParameterType Type Values: 1 temperature 2 supplyVoltage 3 biasCurrent 4 txOutputPower 5 receivedPower Description: This value indicates the optical parameter that is being monitored. Valid values are - temperature(1) supplyVoltage(2) biasCurrent(3) txOutputPower(4) receivedPower(5)	.1.3.6.1.4.1.8886.1.9.1.2.2.1.3
raisecomOpticalPMIntervalMaxParam This object gives the maximum value measured for the optical parameter, in a particular 15 minute or 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.2.2.1.4
raisecomOpticalPMIntervalMinParam This object gives the minimum value measured for the optical parameter, in a particular 15 minute or 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.2.2.1.5
raisecomOpticalPMIntervalMeanParam This object gives the average value of the measured optical parameter, in a particular 15 minute or 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..65535 Description: The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalPa…	.1.3.6.1.4.1.8886.1.9.1.2.2.1.6

Trancetver information Table.

raisecomTranceiverInfoEntry row .1.3.6.1.4.1.8886.1.9.1.4.1

An entry in the raisecomSfpAccessA0Table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
raisecomTranceiverType Type of the interface, such as 1000_BASE_SX_SFP	OctetString	.1.3.6.1.4.1.8886.1.9.1.4.1.1
raisecomTranceiverConnectorType ConnectorType of the interface, such as SC/LC	OctetString	.1.3.6.1.4.1.8886.1.9.1.4.1.2
raisecomTranceiverWavelength Wavelength of the interface, measured in nm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.9.1.4.1.3
raisecomTranceiverVendorName Vendor name of the interface.	OctetString	.1.3.6.1.4.1.8886.1.9.1.4.1.4
raisecomTranceiverVendorPN Vendor part number of the interface.	OctetString	.1.3.6.1.4.1.8886.1.9.1.4.1.5
raisecomTranceiverVendorSN Vendor serial number of the interface.	OctetString	.1.3.6.1.4.1.8886.1.9.1.4.1.6
raisecomTransceiverFiberType Types of the fiber, single_mode, multi_mode, none.	Enumeration Enumerated Values: 1 single-mode 2 multi-mode 3 none	.1.3.6.1.4.1.8886.1.9.1.4.1.7
raisecomTransceiverTransferDistance The max distance which the interface could transmit, measured in meter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.9.1.4.1.8