Standard view Table view

RAISECOM-OPTICAL-MONITOR-MIB

        This MIB module defines objects to monitor optical
characteristics on the optical interfaces in a network element.

Source file: RAISECOM-OPTICAL-MONITOR-MIB
Last revised: 6 Jun 2006, 00:00 UTC
Identity: raisecomOpticalMonitorMIB
Base OID: 1.3.6.1.4.1.8886.1.9

Imported Objects

IF-MIB	ifIndex
RAISECOM-BASE-MIB	raisecomAgent
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC	TEXTUAL-CONVENTION (no object page) TimeTicks
SWITCH-TC	EnableVar

Net-SNMP examples using the raisecom MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'RAISECOM-OPTICAL-MONITOR-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RAISECOM-OPTICAL-MONITOR-MIB::raisecomOpticalMonitorMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-OPTICAL-MONITOR-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-OPTICAL-MONITOR-MIB::raisecomOpticalMonitorMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (49)

raisecomOpticalMonitorMIB		`.1.3.6.1.4.1.8886.1.9`
raisecomOpticalMonitorMIBObjects		`.1.3.6.1.4.1.8886.1.9.1`
raisecomOpticalMonGroup		`.1.3.6.1.4.1.8886.1.9.1.1`
raisecomOpticalMonTable		`.1.3.6.1.4.1.8886.1.9.1.1.1`
raisecomOpticalMonEntry	IF-MIBifIndexraisecomOpticalMonParameterType	`.1.3.6.1.4.1.8886.1.9.1.1.1.1`
raisecomOpticalMonParameterType	OpticalParameterType	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.1`
raisecomOpticalMon15MinValidIntervals	Unsigned32	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.10`
raisecomOpticalMon24HrValidIntervals	Unsigned32	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.11`
raisecomOpticalMonValidStatus	Enumeration	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.12`
raisecomOpticalParameterValue	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.2`
raisecomOpticalParamHighAlarmThresh	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.3`
raisecomOpticalParamHighWarningThresh	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.4`
raisecomOpticalParamLowAlarmThresh	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.5`
raisecomOpticalParamLowWarningThresh	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.6`
raisecomOpticalParamAlarmStatus	Enumeration	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.7`
raisecomOpticalParamAlarmLastValue	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.8`
raisecomOpticalParamAlarmLastChange	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.8886.1.9.1.1.1.1.9`
raisecomOpticalNotifyEnable r/w	SWITCH-TCEnableVar	`.1.3.6.1.4.1.8886.1.9.1.1.2`
raisecomOpticalDigitalDiagnoticEnable r/w	SWITCH-TCEnableVar	`.1.3.6.1.4.1.8886.1.9.1.1.3`
raisecomOpticalPMGroup		`.1.3.6.1.4.1.8886.1.9.1.2`
raisecomOpticalPMCurrentTable		`.1.3.6.1.4.1.8886.1.9.1.2.1`
raisecomOpticalPMCurrentEntry	IF-MIBifIndexraisecomOpticalPMCurrentPeriodraisecomOpticalPMCurrentParamType	`.1.3.6.1.4.1.8886.1.9.1.2.1.1`
raisecomOpticalPMCurrentPeriod	OpticalPMPeriod	`.1.3.6.1.4.1.8886.1.9.1.2.1.1.1`
raisecomOpticalPMCurrentParamType	OpticalParameterType	`.1.3.6.1.4.1.8886.1.9.1.2.1.1.2`
raisecomOpticalPMCurrentMaxParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.2.1.1.3`
raisecomOpticalPMCurrentMinParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.2.1.1.4`
raisecomOpticalPMCurrentMeanParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.2.1.1.5`
raisecomOpticalPMIntervalTable		`.1.3.6.1.4.1.8886.1.9.1.2.2`
raisecomOpticalPMIntervalEntry	IF-MIBifIndexraisecomOpticalPMIntervalPeriodraisecomOpticalPMIntervalNumberraisecomOpticalPMIntervalParamType	`.1.3.6.1.4.1.8886.1.9.1.2.2.1`
raisecomOpticalPMIntervalPeriod	OpticalPMPeriod	`.1.3.6.1.4.1.8886.1.9.1.2.2.1.1`
raisecomOpticalPMIntervalNumber	Integer32	`.1.3.6.1.4.1.8886.1.9.1.2.2.1.2`
raisecomOpticalPMIntervalParamType	OpticalParameterType	`.1.3.6.1.4.1.8886.1.9.1.2.2.1.3`
raisecomOpticalPMIntervalMaxParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.2.2.1.4`
raisecomOpticalPMIntervalMinParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.2.2.1.5`
raisecomOpticalPMIntervalMeanParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.9.1.2.2.1.6`
raisecomTranceiverInfoTable		`.1.3.6.1.4.1.8886.1.9.1.4`
raisecomTranceiverInfoEntry	IF-MIBifIndex	`.1.3.6.1.4.1.8886.1.9.1.4.1`
raisecomTranceiverType	OctetString	`.1.3.6.1.4.1.8886.1.9.1.4.1.1`
raisecomTranceiverConnectorType	OctetString	`.1.3.6.1.4.1.8886.1.9.1.4.1.2`
raisecomTranceiverWavelength	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.8886.1.9.1.4.1.3`
raisecomTranceiverVendorName	OctetString	`.1.3.6.1.4.1.8886.1.9.1.4.1.4`
raisecomTranceiverVendorPN	OctetString	`.1.3.6.1.4.1.8886.1.9.1.4.1.5`
raisecomTranceiverVendorSN	OctetString	`.1.3.6.1.4.1.8886.1.9.1.4.1.6`
raisecomTransceiverFiberType	Enumeration	`.1.3.6.1.4.1.8886.1.9.1.4.1.7`
raisecomTransceiverTransferDistance	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.8886.1.9.1.4.1.8`
raisecomOpticalMonitorMIBNotifications		`.1.3.6.1.4.1.8886.1.9.2`
raisecomOpticalMonitorMIBConformance		`.1.3.6.1.4.1.8886.1.9.3`
raisecomOpticalMonitorMIBCompliances		`.1.3.6.1.4.1.8886.1.9.3.1`
raisecomOpticalMonitorMIBGroups		`.1.3.6.1.4.1.8886.1.9.3.2`

Dependencies (9) 6 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

RAISECOM-OPTICAL-MONITOR-MIBraisecomselected
- IF-MIBrfcdefault fallback1 symbol
  - IANAifType-MIBrfc1 symbol
    - SNMPv2-SMIrfc2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-CONFrfc3 symbols
    - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared7 symbols
    - SNMPv2-TCrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared8 symbols
- RAISECOM-BASE-MIBraisecom1 symbol
  - RFC1155-SMIrfcdefault fallback1 symbol
- SNMPv2-CONFrfcdefault fallbackshared3 symbols
- SNMPv2-SMIrfcdefault fallbackshared5 symbols
- SNMPv2-TCrfcdefault fallbackshared2 symbols
- SWITCH-TCraisecom1 symbol
  - SNMPv2-TCrfcdefault fallbackshared1 symbol

Dependency-first compile order

SNMPv2-SMIrfc
SNMPv2-TCrfc
IANAifType-MIBrfc
SNMPv2-CONFrfc
SNMPv2-MIBrfc
IF-MIBrfc
RFC1155-SMIrfc
RAISECOM-BASE-MIBraisecom
SWITCH-TCraisecom
RAISECOM-OPTICAL-MONITOR-MIBraisecomselected

Type Definitions (3)

OpticalPMPeriod	Enumeration	`fifteenMin(1)` `twentyFourHour(2)` This value indicates the time period over which performance monitoring data has been collected.
OpticalParameterType	Enumeration	`temperature(1)` `supplyVoltage(2)` `biasCurrent(3)` `txOutputPower(4)` `receivedPower(5)` This value indicates the optical parameter that is being monitored. Valid values are - temperature(1) supplyVoltage(2) biasCurrent(3) txOutputPower(4) receivedPower(5)
OpticalParameterValue	Integer32	`range: -1000000..65535` The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalParameterType. When the optical parameter being monitored is 'temperature', the supported range is from -32768 to 32768, in units of 1/256 degrees centigrade. Example: A value of 6016 represents a temperature reading of 23.5 degrees C. When the optical parameter being monitored is 'supplyVoltage', the supported range is from 0 to 65535, in units of 1/10 millivolts. Example: A value of 55000 represents a supplyVoltage reading of 5.5 V. When the optical parameter being monitored is 'biasCurrent', the supported range is from 0 to 65535, in units of 1/500 microamperes. Example: A value of 500 represents a bias current reading of 1 microamperes. When the optical parameter being monitored is 'txOutputPower', the supported range is from 0 to 65535, in units of 1/10000 mW ..and express in units of dBm?? Example: A value of 60000 represents a txOutputPower reading of 7.78 dBm. When the optical parameter being monitored is 'receivedPower', the supported range is from 0 to 65535, in units of 1/10000 mW ..and express in units of dBm?? Example: A value of 60000 represents a receivedPower reading of 7.78 dBm.

Conformance Groups (5)

raisecomOpticalMIBMonGroup	raisecomOpticalParameterValue A mandatory object that provides monitoring of optical characteristics.	`.1.3.6.1.4.1.8886.1.9.3.2.1`
raisecomOpticalMIBThresholdGroup	raisecomOpticalParamHighAlarmThresh raisecomOpticalParamHighWarningThresh raisecomOpticalParamLowAlarmThresh raisecomOpticalParamLowWarningThresh raisecomOpticalParamAlarmStatus raisecomOpticalParamAlarmLastValue raisecomOpticalParamAlarmLastChange A collection of objects that support thresholds on optical parameters and provide status information when the thresholds are exceeded .	`.1.3.6.1.4.1.8886.1.9.3.2.2`
raisecomOpticalMIBPMGroup	raisecomOpticalMon15MinValidIntervals raisecomOpticalMon24HrValidIntervals raisecomOpticalPMCurrentMaxParam raisecomOpticalPMCurrentMinParam raisecomOpticalPMCurrentMeanParam raisecomOpticalPMIntervalMaxParam raisecomOpticalPMIntervalMinParam raisecomOpticalPMIntervalMeanParam A collection of objects that provide optical performance monitoring data for 15 minute and 24 hour intervals.	`.1.3.6.1.4.1.8886.1.9.3.2.3`
raisecomOpticalMIBNotifyEnableGroup	raisecomOpticalNotifyEnable An object to control the generation of notifications.	`.1.3.6.1.4.1.8886.1.9.3.2.4`
raisecomOpticalMIBNotifGroup	raisecomOpticalMonParameterStatus A notification generated when a threshold on an optical parameter is exceeded or cleared.	`.1.3.6.1.4.1.8886.1.9.3.2.5`

Compliance Statements (1)

OID .1.3.6.1.4.1.8886.1.9.3.1.1

The compliance statement for network elements that
monitor optical characteristics and thresholds on the
optical interfaces in a network element.

Required groups

mandatory	raisecomOpticalMIBMonGroup
optional	raisecomOpticalMIBThresholdGroup	This group is required for network elements that support thresholds on optical parameters.
optional	raisecomOpticalMIBPMGroup	This group is required for network elements that support collection of optical performance monitoring data for 15 minute or 24 hour intervals.
optional	raisecomOpticalMIBNotifyEnableGroup	This group is required for network elements that support the cOpticalMIBNotifGroup.
optional	raisecomOpticalMIBNotifGroup	This group is required for network elements that generate notifications when a threshold is exceeded or cleared on an interface.

Notifications / Traps (1)

Name	OID	Description
raisecomOpticalMonParameterStatus raisecomOpticalParameterValue raisecomOpticalParamAlarmStatus	`.1.3.6.1.4.1.8886.1.9.2.1`	This notification is sent when any threshold related to an optical parameter is exceeded on an interface. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable object.