RAISECOM-MPLS-LSPV-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
74

raisecomMplsLspvPingCtlTable

table
.1.3.6.1.4.1.8886.1.43.2.2 · 1 row entry · 22 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomMplsLspvPingCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-MPLS-LSPV-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-MPLS-LSPV-MIB::raisecomMplsLspvPingCtlTable' 
Defines the mpls Ping Control Table for providing, via SNMP,
the capability of performing mpls Ping operations at
a target fec.  The results of these operations are
stored in the raisecomMplsLspvPingResultsTable and the
PingProbeHistoryTable.
raisecomMplsLspvPingCtlEntry row .1.3.6.1.4.1.8886.1.43.2.2.1
Defines an entry in the raisecomMplsLspvPingCtlTable.
The first index element, PingCtlOwnerIndex, is of type
SnmpAdminString,a textual convention that allows for
use of the SNMPv3

View-Based Access Contr…
Indexes
Column Syntax OID
raisecomMplsLspvPingCtlOwnerIndex
First index of mpls Ping control table.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
 .1.3.6.1.4.1.8886.1.43.2.2.1.1
raisecomMplsLspvPingCtlTestName
The name of the Ping test. This is locally unique, within
the scope of an raisecomMplsLspvPingCtlOwnerIndex.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
 .1.3.6.1.4.1.8886.1.43.2.2.1.2
raisecomMplsLspvPingCtlPwId
This object was used when test vpws connective
PW-TC-STD-MIBPwIDTyper/w .1.3.6.1.4.1.8886.1.43.2.2.1.4
raisecomMplsLspvPingCtlVsi
This object stands for VPN ID which was used for vpls
PW-TC-STD-MIBPwAttachmentIdentifierTyper/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.2.2.1.5
raisecomMplsLspvPingCtlTunnelName
The canonical name assigned to the tunnel.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.2.2.1.6
raisecomMplsLspvPingCtlTargetFecAddressType
The address type of target fec which will be tested.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.8886.1.43.2.2.1.7
raisecomMplsLspvPingCtlTargetFecAddress
The address of target fec which will be tested.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.2.2.1.8
raisecomMplsLspvPingCtlTargetFecAddressPrefix
The prefix length of target fec address.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.8886.1.43.2.2.1.9
raisecomMplsLspvPingCtlNextHopAddress
The next hop address.This object was used to
identify the specic path when there are Multiple paths
to the target.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.2.2.1.10
raisecomMplsLspvPingCtlDataSize
Specifies the size of the data portion to be
transmitted in a mpls Ping operation, in octets.
Unsigned32r/w
Constraints:
range: 100-1500
 .1.3.6.1.4.1.8886.1.43.2.2.1.11
raisecomMplsLspvPingCtlTimeOut
Specifies the time-out value, in seconds, for a
remote mpls Ping operation.
secondsUnsigned32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.8886.1.43.2.2.1.12
raisecomMplsLspvPingCtlProbeCount
Specifies the number of times to perform a mpls Ping
operation at a remote target fec.
secondsUnsigned32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.8886.1.43.2.2.1.13
raisecomMplsLspvPingCtlAdminStatus
Reflects the desired state that a raisecomMplsLspvPingCtlEntry should be
in:

enabled(1) - Attempt to activate the test as defined by
this raisecomMplsLspvPingCtlEntry.
disabled(2) …
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.8886.1.43.2.2.1.14
raisecomMplsLspvPingCtlFrequency
The number of seconds to wait before repeating a mpls Ping test
as defined by the value of the various objects in the
corresponding row.
secondsUnsigned32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.8886.1.43.2.2.1.15
raisecomMplsLspvPingCtlTtl
Specifies the time-to-live value
time-to-live valueUnsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.8886.1.43.2.2.1.16
raisecomMplsLspvPingCtlExp
Specifies the MPLS experimental field value
in the MPLS header for an MPLS echo request.
Valid values are from 0 to 7. Default is 0.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.1.43.2.2.1.17
raisecomMplsLspvPingCtlReplyDscp
Provides the capability to request a specific
class of service (CoS) in an echo reply by providing
a differentiated services code point (DSCP) value.
The echo reply is returned with the IP header type
of service (ToS)…
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.8886.1.43.2.2.1.18
raisecomMplsLspvPingCtlReplyPadTlv
This was used for testing the ability of the sender of an
echo reply to support the copy pad TLV
to echo reply.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.1.43.2.2.1.19
raisecomMplsLspvPingCtlReplyMode
Specifies the mode of mpls Echo reply message.
RelpyModer/w
Type Values:
1udp-Reply
2udp-Alert-Reply
3level-ControlChannel-Reply
Description:
Describes mpls echo reply mode
 .1.3.6.1.4.1.8886.1.43.2.2.1.20
raisecomMplsLspvPingCtlSourceAddressType
Specifies the source address Type
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.8886.1.43.2.2.1.21
raisecomMplsLspvPingCtlSourceAddress
Specifies the source address. The default address
is transport inteface address.This address is used
as the destination address in the MPLS echo response.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.2.2.1.22
raisecomMplsLspvPingCtlRowStatus
This object allows entries to be created and deleted
in the raisecomMplsLspvPingCtlTable. Deletion of an entry in
this table results in a deletion of all corresponding (same
raisecomMplsLspvPingCtlOwnerIndex and raisec…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.1.43.2.2.1.23

raisecomMplsLspvPingResultsTable

table
.1.3.6.1.4.1.8886.1.43.2.3 · 1 row entry · 8 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomMplsLspvPingResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-MPLS-LSPV-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-MPLS-LSPV-MIB::raisecomMplsLspvPingResultsTable' 
Defines the mpls Ping Results Table for providing
the capability of performing mpls Ping operations at
a target fec   The results of these operations are
stored in the raisecomMplsLspvPingResultsTable.
raisecomMplsLspvPingResultsEntry row .1.3.6.1.4.1.8886.1.43.2.3.1
Defines an entry in the raisecomMplsLspvPingResultsTable.
The raisecomMplsLspvPingResultsTable has the same indexing
as the raisecomMplsLspvPingCtlTable in order for a
raisecomMplsLspvPingResultsEntry tocorrespond to t…
Indexes
Column Syntax OID
raisecomMplsLspvPingResultsOperStatus
Reflects the operational state of a raisecomMplsLspvPingCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped.
completed(3) - Test is completed
Enumeration
Enumerated Values:
1enabled
2disabled
3completed
 .1.3.6.1.4.1.8886.1.43.2.3.1.1
raisecomMplsLspvPingResultsMinRtt
The minimum mpls Ping round-trip-time (RTT) received. A value
of 0 for this object implies that no RTT has been received.
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.2.3.1.2
raisecomMplsLspvPingResultsMaxRtt
The maximum mpls Ping round-trip-time (RTT) received. A value
of 0 for this object implies that no RTT has been received.
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.2.3.1.3
raisecomMplsLspvPingResultsAverageRtt
The current average mpls Ping round-trip-time (RTT).
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.2.3.1.4
raisecomMplsLspvPingResultsProbeResponses
Number of responses received for the corresponding

raisecomMplsLspvPingCtlEntry and raisecomMplsLspvPingResultsEntry.
The value of this object MUST be reported as 0 when no probe
responses have been rece…
responsesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.2.3.1.5
raisecomMplsLspvPingResultsSentProbes
The value of this object reflects the number of probes sent
for the corresponding raisecomMplsLspvPingCtlEntry and
raisecomMplsLspvPingResultsEntry.The value of this object
MUST be reported as 0 when no probes have be…
probesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.2.3.1.6
raisecomMplsLspvPingResultsRttSumOfSquares
This object contains the sum of the squares for all
mpls Ping responses received. Its purpose is to
enable standard deviation calculation. The value of this
object MUST be reported as 0 when no Ping responses have …
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.2.3.1.7
raisecomMplsLspvPingResultsLastGoodProbe
Date and time when the last response was received for
a probe.
probesSNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.8886.1.43.2.3.1.8

raisecomMplsLspvPingProbeHistoryTable

table
.1.3.6.1.4.1.8886.1.43.2.4 · 1 row entry · 8 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomMplsLspvPingProbeHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-MPLS-LSPV-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-MPLS-LSPV-MIB::raisecomMplsLspvPingProbeHistoryTable' 
Defines a table for storing the results of a mpls Ping
operation.specifies each probe result.
raisecomMplsLspvPingProbeHistoryEntry row .1.3.6.1.4.1.8886.1.43.2.4.1
Defines an entry in the raisecomMplsLspvPingProbeHistoryTable.
The first two index elements identify the raisecomMplsLspvPingCtlEntry that a PingProbeHistoryEntry belongs
to. The third index element selects a single pr…
Indexes
Column Syntax OID
raisecomMplsLspvPingProbeHistoryIndex
An entry in this table is created when the result of
a mpls Ping probe is determined. The initial 2 instance
identifier index values identify the raisecomMplsLspvPingCtlEntry
that a probe result (raisecomMplsLspvPingPr…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.8886.1.43.2.4.1.1
raisecomMplsLspvPingProbeHistoryStatus
The result operstaus of each mpls Ping probe.
ResponseStatus
Type Values:
1responseReceived
2requestTimedOut
3requestSendFailed
4unknown
Description:
Describes mpls echo request response status
 .1.3.6.1.4.1.8886.1.43.2.4.1.2
raisecomMplsLspvPingProbeHistoryReturnCode
The response return code.
Unsigned32
Constraints:
range: 0-13
 .1.3.6.1.4.1.8886.1.43.2.4.1.3
raisecomMplsLspvPingProbeHistoryReturnSubCode
The response return sub code.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.2.4.1.4
raisecomMplsLspvPingProbeHistoryReplyAddressType
The response address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.8886.1.43.2.4.1.5
raisecomMplsLspvPingProbeHistoryReplyAddress
The response address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.2.4.1.6
raisecomMplsLspvPingProbeHistoryReplyDataSize
The size of reply packet.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.2.4.1.7
raisecomMplsLspvPingProbeHistoryResponse
The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.2.4.1.8

raisecomMplsLspvTracertCtlTable

table
.1.3.6.1.4.1.8886.1.43.3.2 · 1 row entry · 21 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomMplsLspvTracertCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-MPLS-LSPV-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-MPLS-LSPV-MIB::raisecomMplsLspvTracertCtlTable' 
Defines the mpls Tracert Control Table for providing, via SNMP,
the capability of performing mpls Tracert operations at
a target fec.  The results of these operations are
stored in the raisecomMplsLspvTracertResultsTable and the
raisecomMplsLspvTracertProbeHistoryTable.
raisecomMplsLspvTracertCtlEntry row .1.3.6.1.4.1.8886.1.43.3.2.1
Defines an entry in the raisecomMplsLspvTracertCtlTable.
The first index element, TracertCtlOwnerIndex, is of type
SnmpAdminString,a textual convention that allows for
use of the SNMPv3

View-Based Access…
Indexes
Column Syntax OID
raisecomMplsLspvTracertCtlOwnerIndex
First index of mpls Tracert control table.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
 .1.3.6.1.4.1.8886.1.43.3.2.1.1
raisecomMplsLspvTracertCtlTestName
The name of the Tracert test. This is locally unique, within
the scope of an raisecomMplsLspvTracertCtlOwnerIndex.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
 .1.3.6.1.4.1.8886.1.43.3.2.1.2
raisecomMplsLspvTracertCtlTargetFecType
The type of target fec which will be tested.It contains lsp??pw??tunnel
and vpls test.
r/w .1.3.6.1.4.1.8886.1.43.3.2.1.3
raisecomMplsLspvTracertCtlPwId
This object was used when test vpws connective
PW-TC-STD-MIBPwIDTyper/w .1.3.6.1.4.1.8886.1.43.3.2.1.4
raisecomMplsLspvTracertCtlVsi
This object stands for VPN ID which was used for vpls
PW-TC-STD-MIBPwAttachmentIdentifierTyper/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.3.2.1.5
raisecomMplsLspvTracertCtlTunnelName
The canonical name assigned to the tunnel.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.3.2.1.6
raisecomMplsLspvTracertCtlTargetFecAddressType
The address type of target fec which will be tested.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.8886.1.43.3.2.1.7
raisecomMplsLspvTracertCtlTargetFecAddress
The address of target fec which will be tested.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.3.2.1.8
raisecomMplsLspvTracertCtlTargetFecAddressPrefix
The prefix length of target fec address.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.8886.1.43.3.2.1.9
raisecomMplsLspvTracertCtlNextHopAddress
The next hop address.This object was used to
identify the specic path when there are Multiple paths
to the target.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.3.2.1.10
raisecomMplsLspvTracertCtlTimeOut
Specifies the time-out value, in seconds, for a
remote mpls Tracert operation.
secondsUnsigned32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.8886.1.43.3.2.1.11
raisecomMplsLspvTracertCtlAdminStatus
Reflects the desired state that a raisecomMplsLspvTracertCtlEntry should be
in:

enabled(1) - Attempt to activate the test as defined by
this raisecomMplsLspvTracertCtlEntry.
disabl…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.8886.1.43.3.2.1.12
raisecomMplsLspvTracertCtlMaxTtl
Specifies the time-to-live value
time-to-live valueUnsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.8886.1.43.3.2.1.13
raisecomMplsLspvTracertCtlExp
Specifies the MPLS experimental field value
in the MPLS header for an MPLS echo request.
Valid values are from 0 to 7. Default is 0.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.1.43.3.2.1.14
raisecomMplsLspvTracertCtlReplyDscp
Provides the capability to request a specific
class of service (CoS) in an echo reply by providing
a differentiated services code point (DSCP) value.
The echo reply is returned with the IP header type
of service (ToS)…
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.8886.1.43.3.2.1.15
raisecomMplsLspvTracertCtlReplyPadTlv
This was used for testing the ability of the sender of an
echo reply to support the copy pad TLV
to echo reply.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.1.43.3.2.1.16
raisecomMplsLspvTracertCtlReplyMode
Specifies the mode of mpls Echo reply mode.
RelpyModer/w
Type Values:
1udp-Reply
2udp-Alert-Reply
3level-ControlChannel-Reply
Description:
Describes mpls echo reply mode
 .1.3.6.1.4.1.8886.1.43.3.2.1.17
raisecomMplsLspvTracertCtlSourceAddressType
Specifies the source address Type
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.8886.1.43.3.2.1.18
raisecomMplsLspvTracertCtlSourceAddress
Specifies the source address. The default address
is transport inteface address.This address is used
as the destination address in the MPLS echo response.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.3.2.1.19
raisecomMplsLspvTracertCtlFlagFec
Specifies whether sender wants the receiver to perform FEC Stack validation
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.1.43.3.2.1.20
raisecomMplsLspvTracertCtlRowStatus
This object allows entries to be created and deleted
in the raisecomMplsLspvTracertCtlTable. Deletion of an entry in
this table results in a deletion of all corresponding (same
raisecomMplsLspvTracertCtlOwnerIndex and …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.1.43.3.2.1.21

raisecomMplsLspvTracertResultsTable

table
.1.3.6.1.4.1.8886.1.43.3.3 · 1 row entry · 2 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomMplsLspvTracertResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-MPLS-LSPV-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-MPLS-LSPV-MIB::raisecomMplsLspvTracertResultsTable' 
Defines the mpls Tracert Results Table for providing
the capability of performing mpls Tracert operations at
a target fec   The results of these operations are
stored in the raisecomMplsLspvTracertResultsTable.
raisecomMplsLspvTracertResultsEntry row .1.3.6.1.4.1.8886.1.43.3.3.1
Defines an entry in the raisecomMplsLspvTracertResultsTable.
The raisecomMplsLspvTracertResultsTable has the same indexing
as the raisecomMplsLspvTracertCtlTable in order for a
raisecomMplsLspvTracertResultsEntry to
…
Indexes
Column Syntax OID
raisecomMplsLspvTracertResultsOperStatus
Reflects the operational state of a TracertCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped.
completed(3) - Test is completed
Enumeration
Enumerated Values:
1enabled
2disabled
3completed
 .1.3.6.1.4.1.8886.1.43.3.3.1.1
raisecomMplsLspvTracertResultsCurHopCount
Reflects the current mpls TTL value (from 1 to
255) for a remote mpls Tracert operation.
Maximum TTL value is determined by
raisecomMplsLspvTracertCtlMaxTtl.
hopsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.3.3.1.2

raisecomMplsLspvTracertProbeHistoryTable

table
.1.3.6.1.4.1.8886.1.43.3.4 · 1 row entry · 13 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomMplsLspvTracertProbeHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-MPLS-LSPV-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-MPLS-LSPV-MIB::raisecomMplsLspvTracertProbeHistoryTable' 
Defines a table for storing the results of a mpls Tracert
operation.specifies each probe result.
raisecomMplsLspvTracertProbeHistoryEntry row .1.3.6.1.4.1.8886.1.43.3.4.1
Defines an entry in the raisecomMplsLspvTracertProbeHistoryTable.
The first two index elements identify the raisecomMplsLspvTracertCtlEntry that a TracertProbeHistoryEntry belongs
to. The third index element selects a …
Indexes
Column Syntax OID
raisecomMplsLspvTracertProbeHistoryHopIndex
Indicates which hop in a mpls traceroute path the probe's
results are for.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.8886.1.43.3.4.1.1
raisecomMplsLspvTracertProbeHistoryProbeIndex
Indicates the index of a probe for a particular
hop in a mpls traceroute path.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.8886.1.43.3.4.1.2
raisecomMplsLspvTracertProbeHistoryStatus
The result operstaus of each mpls traceroute probe.
ResponseStatus
Type Values:
1responseReceived
2requestTimedOut
3requestSendFailed
4unknown
Description:
Describes mpls echo request response status
 .1.3.6.1.4.1.8886.1.43.3.4.1.3
raisecomMplsLspvTracertProbeHistoryDMAddressType
This objects indicates the type of address stored
in the Down stream Tlv
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.8886.1.43.3.4.1.4
raisecomMplsLspvTracertProbeHistoryDMAddress
This objects indicates the address stored
in the Down stream Tlv
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.3.4.1.5
raisecomMplsLspvTracertProbeHistoryDMInterfaceAddress
This objects indicates the interface address stored
in the Down stream Tlv
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.3.4.1.6
raisecomMplsLspvTracertProbeHistoryDMLabelStack
This objects indicates the label stack stored
in the Down stream Tlv
LabelStack
Type Constraints:
range: 1..64
Description:
This type was used for label stack.
 .1.3.6.1.4.1.8886.1.43.3.4.1.7
raisecomMplsLspvTracertProbeHistoryReturnCode
The response return code.
Unsigned32
Constraints:
range: 0-13
 .1.3.6.1.4.1.8886.1.43.3.4.1.8
raisecomMplsLspvTracertProbeHistoryReturnSubCode
The response return sub code.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.3.4.1.9
raisecomMplsLspvTracertProbeHistoryReplyAddressType
The address type of reply.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.8886.1.43.3.4.1.10
raisecomMplsLspvTracertProbeHistoryReplyAddress
The address of reply.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.43.3.4.1.11
raisecomMplsLspvTracertProbeHistoryResponse
The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe.
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.43.3.4.1.12
raisecomMplsLspvTracertProbeHistoryReplyRole
The type of reply router in the lsp path.
LspRole
Type Values:
1lsp_ingress
2lsp_transit
3lsp_egress
Description:
Describes role of lsp path
 .1.3.6.1.4.1.8886.1.43.3.4.1.13