RAISECOM-MCAST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
12

raisecomL2MulticastAddressTable

table
.1.3.6.1.4.1.8886.1.27.2.2.3 · 1 row entry · 5 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomL2MulticastAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-MCAST-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-MCAST-MIB::raisecomL2MulticastAddressTable' 
This table provides the information of l2 multicast address.
raisecomL2MulticastAddressEntry row .1.3.6.1.4.1.8886.1.27.2.2.3.1
Each entry provides a l2 multicast address information. Entries
can be created as a static multicast address.
Indexes
Column Syntax OID
raisecomL2MulticastMVlan
The vlan-id in a frame to which this entry's forwarding information applies.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.27.2.2.3.1.1
raisecomL2MulticastAddress
The destination MAC address in a frame to which this entry's forwarding
information applies. This object must take the value of a Multicast or
Broadcast address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.8886.1.27.2.2.3.1.2
raisecomL2MulticastEgressPortlist
The set of ports to which frames destined for a specific Multicast must be forwarded.
SWITCH-TCPortList
Type Constraints:
range: 32
 .1.3.6.1.4.1.8886.1.27.2.2.3.1.3
raisecomL2MulticastStaticPortlist
The set of ports to which frames received destined for a specific Multicast must be
forwarded, regardless of any dynamic information e.g. from GMRP.
SWITCH-TCPortListr/w
Type Constraints:
range: 32
 .1.3.6.1.4.1.8886.1.27.2.2.3.1.4
raisecomL2MulticastRowStatus
The row status of the raisecomL2MulticastAddress table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.1.27.2.2.3.1.5

raisecomIgmpVlanCopyAddressTable

table
.1.3.6.1.4.1.8886.1.27.2.3.3 · 1 row entry · 7 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomIgmpVlanCopyAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-MCAST-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-MCAST-MIB::raisecomIgmpVlanCopyAddressTable' 
This table provides information of igmp vlan-copy table.
raisecomIgmpVlanCopyAddressEntry row .1.3.6.1.4.1.8886.1.27.2.3.3.1
Each entry provides a vlan-copy multicast address information. Entries
can be created as a static multicast address.
Indexes
Column Syntax OID
raisecomIgmpVlanCopyMVlan
The vlan-id in a frame to which this entry's forwarding information applies.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.8886.1.27.2.3.3.1.1
raisecomIgmpVlanCopyIpAddressType
The type of the destination ip address in a frame to which this entry's
forwarding information applies.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.8886.1.27.2.3.3.1.2
raisecomIgmpVlanCopyIpAddress
The destination ip address in a frame to which this entry's forwarding information applies.
This object must take the value of a Multicast address.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 0-20
 .1.3.6.1.4.1.8886.1.27.2.3.3.1.3
raisecomIgmpVlanCopyEgressPort
The port number to which frames destined for a specific Multicast must be forwarded.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.27.2.3.3.1.4
raisecomIgmpVlanCopyUVlanList
The user vlan list to which frames destined for a specific Multicast must be forwarded.
SWITCH-TCVlanset
Type Constraints:
range: 512
 .1.3.6.1.4.1.8886.1.27.2.3.3.1.5
raisecomIgmpVlanCopyStaticFlagList
1 indicates that the user copied vlan is configed by hand??not learned.
0 indicates that the user copied vlan is learned through the report packet.
SWITCH-TCVlansetr/w
Type Constraints:
range: 512
 .1.3.6.1.4.1.8886.1.27.2.3.3.1.6
raisecomIgmpVlanCopyRowStatus
The row status of the igmp vlan copy table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.1.27.2.3.3.1.7