RAISECOM-IP-BASE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
19

rcIpBaseAddressTable

table
.1.3.6.1.4.1.8886.6.1.16.4.1.2.1 · 1 row entry · 7 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcIpBaseAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-IP-BASE-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-IP-BASE-MIB::rcIpBaseAddressTable' 
This table is used to configure IPv4 or IPv6 addresses of an interface.
rcIpBaseAddressEntry row .1.3.6.1.4.1.8886.6.1.16.4.1.2.1.1
Define the IP address information.
Indexes
Column Syntax OID
rcIpBaseAddressIfIndex
The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of RFC 1573's…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.1.1.1
rcIpBaseAddresstType
The type of Internet address for all the objects with SYNTAX
InetAddress and InetAddressPrefixLength in this entry.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.1.1.2
rcIpBaseAddress
The IP address to which this entry's addressing
information pertains.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.1.1.3
rcIpBaseAddressPrefixLength
The length of the prefix associated with the IP address
of this entry.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.1.1.4
rcIpBaseAddressSourceType
Indicate the type of source of the IP address.
Enumerationr/w
Enumerated Values:
1assignedIp
2cluster
3dhcp
4bootp
5negotiate
6unnumbered
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.1.1.5
rcIpBaseAddressCatagory
Indicates the IP address category of this entry.
IpAddressCatagoryr/w
Type Values:
1primary
2sub
3linklocal
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.1.1.6
rcIpBaseAddressRowStatus
The row status is used to manage creation and deletion of rows
in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.1.1.7

rcVlanInterfaceIndexTable

table
.1.3.6.1.4.1.8886.6.1.16.4.1.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcVlanInterfaceIndexTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-IP-BASE-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-IP-BASE-MIB::rcVlanInterfaceIndexTable' 
The rcVlanInterfaceIndexTable provides a way to translate 
a VLAN-id in to an ifIndex, so that the VLAN interface's 
configuration can be obtained from interface entry in ifTable.
rcVlanInterfaceIndexEntry row .1.3.6.1.4.1.8886.6.1.16.4.1.2.2.1
Each entry represents a VLAN interface and the IfIndex.
Indexes
Column Syntax OID
rcVlanId
The VLAN-id number of the VLAN interface.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.2.1.1
rcVlanIfIndex
The IfIndex associated with the VLAN interface.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.2.1.2
rcVlanIfIndexRowStatus
The row status is used to manage creation and deletion of rows
in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.2.1.3

rcIpBaseManVlanTable

table
.1.3.6.1.4.1.8886.6.1.16.4.1.2.3 · 1 row entry · 7 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcIpBaseManVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-IP-BASE-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-IP-BASE-MIB::rcIpBaseManVlanTable' 
The rcIpBaseManVlanTable provides a way to tag the management traffic 
(internal port --- WAN port) once or twice. The ethertype, VID and priority are configurable.
rcIpBaseManVlanEntry row .1.3.6.1.4.1.8886.6.1.16.4.1.2.3.1
Each entry represents a IfIndex.
Indexes
Column Syntax OID
rcIpBaseManVlanIfIndex
The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of RFC 1573's…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.3.1.1
rcIpBaseManVlanMode
The mode of management traffic.
Enumerationr/w
Enumerated Values:
1single-taging
2double-taging
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.3.1.2
rcIpBaseInnerVlan
The inner vlan of management traffic.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.3.1.3
rcIpBaseCos
The cos value of management packet in the specified ifindex.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.3.1.4
rcIpBaseInnerCos
The inner cos value of management packet in the specified ifindex.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.3.1.5
rcIpBaseTpid
The tpid value of management packet in the specified ifindex.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.3.1.6
rcIpBaseInnerTpid
The inner tpid value of management packet in the specified ifindex.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.3.1.7

rcIpIfMtuTable

table
.1.3.6.1.4.1.8886.6.1.16.4.1.2.4 · 1 row entry · 2 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcIpIfMtuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-IP-BASE-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-IP-BASE-MIB::rcIpIfMtuTable' 
This table is used to configure MTU of an interface.
rcIpIfMtuEntry row .1.3.6.1.4.1.8886.6.1.16.4.1.2.4.1
Define the IP MTU information.
Indexes
Column Syntax OID
rcIpIfIndex
The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of RFC 1573's…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.4.1.1
rcIpIfMtu
Indicate MTU of the IP interface.
Integer32r/w
Constraints:
range: 1500-9216
 .1.3.6.1.4.1.8886.6.1.16.4.1.2.4.1.2