RADLAN-rlMacMulticast-MIB Table View

The table listing the per vlan parameters : enable/disable ,
aging-out timers , filter ports and permanent ports.

rlIgmpSnoopVlanEntry row .1.3.6.1.4.1.89.55.2.7.1

An entry (conceptual row) in the rlIgmpSnoopVlanTable.

Indexes

rlIgmpSnoopVlanTag

Column	Syntax	OID
rlIgmpSnoopVlanTagobsolete The tag of the VLAN for which this entry contains information for an IP Multicast Router.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.55.2.7.1.1
rlIgmpSnoopVlanEnableobsolete Enable/Disable IGMP Snooping in the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.2.7.1.2
rlIgmpSnoopVlanRouterLearnobsolete Enable/Disable of Learning of routers in the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.2.7.1.3
rlIgmpSnoopVlanHostTimeOutobsolete The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.55.2.7.1.4
rlIgmpSnoopVlanQuerierTimeOutobsolete The amount of time where no query is heard until querier is activated	secondsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.55.2.7.1.5
rlIgmpSnoopVlanRouterTimeOutobsolete The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan.	secondsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.55.2.7.1.6
rlIgmpSnoopVlanLeaveTimeOutobsolete The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.55.2.7.1.7
rlIgmpSnoopVlanIgmpVersionobsolete The current IGMP protocol version running on the VLAN.	IgmpVersion Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.89.55.2.7.1.8
rlIgmpSnoopVlanRouterPortlistobsolete List of router ports learned dynamically on this VLAN from PIM, DVMRP, MRDISC and IGMP Query messages	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.89.55.2.7.1.9

multicast vlan used for this port

rlIgmpSnoopMulticastTvEntry row .1.3.6.1.4.1.89.55.2.10.1

entry of multicast ip

Indexes

rlIgmpSnoopMulticastTvVID rlIgmpSnoopMulticastTvGroup

Column	Syntax	OID
rlIgmpSnoopMulticastTvVID Specify the multicast ip to be used.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.55.2.10.1.1
rlIgmpSnoopMulticastTvGroup Specify the multicast ip to be used.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.55.2.10.1.2
rlIgmpSnoopMulticastTvStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.55.2.10.1.3

The table listing the IP multicast memberships.

rlIgmpSnoopMembershipEntry row .1.3.6.1.4.1.89.55.2.11.1

An entry (conceptual row) in the rlIgmpSnoopMembershipTable.

Indexes

rlIgmpSnoopMembershipVlanTag rlIgmpSnoopMembershipGroupIpAddress rlIgmpSnoopMembershipSourceIpAddress

Column	Syntax	OID
rlIgmpSnoopMembershipVlanTag The VLAN tag for which this entry contains multicast membership information.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.55.2.11.1.1
rlIgmpSnoopMembershipGroupIpAddress The multicast group address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.55.2.11.1.2
rlIgmpSnoopMembershipSourceIpAddress The unicast source address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.55.2.11.1.3
rlIgmpSnoopMembershipIncPortlist Included ports, where a report message was heard for the group (IGMP version 2|1) or group and source address (IGMP version 3).	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.89.55.2.11.1.4
rlIgmpSnoopMembershipExcPortlist Excluded ports where an exclude report message was heard for the group and source address (IGMP version 3).	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.89.55.2.11.1.5
rlIgmpSnoopMembershipExpiryTimeobsolete Time till entry will expire.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.55.2.11.1.6
rlIgmpSnoopMembershipCompatibilityMode IGMP group compatibility mode.	IgmpVersion Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.89.55.2.11.1.7

A table that contains IGMP Snooping Querier information about
every vlan. This is indexed by vlan tag.

rlIgmpSnoopQuerierVlanEntry row .1.3.6.1.4.1.89.55.2.12.1

An entry (conceptual row) in the rlIgmpSnoopQuerierVlanTable.

Indexes

rlIgmpSnoopQuerierVlanTag

Column	Syntax	OID
rlIgmpSnoopQuerierVlanTag An IGMP Snoop Querier entry vlan tag.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.55.2.12.1.1
rlIgmpSnoopQuerierAdminEnable The desired administrative state of IGMP Snoop Querier on the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.2.12.1.2
rlIgmpSnoopQuerierOperEnable The current operational state of IGMP Snoop Querier on the vlan.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.2.12.1.3
rlIgmpSnoopQuerierAdminAddr The desired IP address is being used in IGMP Snoop Querier messages on the vlan.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.55.2.12.1.4
rlIgmpSnoopQuerierOperAddr The current operational IP address is being used in IGMP Snoop Querier messages on the vlan.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.55.2.12.1.5
rlIgmpSnoopQuerierAdminVersionNumber The highest version number of IGMP Snoop Querier for the vlan.	IgmpVersionr/w Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.89.55.2.12.1.6
rlIgmpSnoopQuerierOperVersionNumber The current operational version number of IGMP Snoop Querier for the vlan.	IgmpVersion Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.89.55.2.12.1.7
rlIgmpSnoopQuerierElectionEnable Whether or not to participate in querier election. When true, the snooping querier participates in querier election. When false, the snooping querier is the elected querier until a general query is heard from another ro…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.2.12.1.8

The table listing the IP multicast memberships.

rlIgmpMldSnoopMembershipEntry row .1.3.6.1.4.1.89.55.5.4.1

An entry (conceptual row) in the rlIgmpMldSnoopMembershipTable.

Indexes

rlIgmpMldSnoopMembershipVlanTag rlIgmpMldSnoopMembershipGroupIpAddressType rlIgmpMldSnoopMembershipGroupIpAddress rlIgmpMldSnoopMembershipSourceIpAddressType rlIgmpMldSnoopMembershipSourceIpAddress

Column	Syntax	OID
rlIgmpMldSnoopMembershipVlanTag The VLAN tag for which this entry contains multicast membership information.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.55.5.4.1.1
rlIgmpMldSnoopMembershipGroupIpAddressType Inet type IPv4/IPv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.55.5.4.1.2
rlIgmpMldSnoopMembershipGroupIpAddress The multicast group address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.89.55.5.4.1.3
rlIgmpMldSnoopMembershipSourceIpAddressType Inet type IPv4/IPv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.55.5.4.1.4
rlIgmpMldSnoopMembershipSourceIpAddress The unicast source address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.89.55.5.4.1.5
rlIgmpMldSnoopMembershipIncPortlist Included ports, where a report message was heard for the group (IGMPv2/V1 or MLDv1) or group and source address (IGMPv3/MLDv2).	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.89.55.5.4.1.6
rlIgmpMldSnoopMembershipExcPortlist list of excluded ports to which an exclude report message was heard for the group and source address (IGMPv3/MLDv2 ).	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.89.55.5.4.1.7
rlIgmpMldSnoopMembershipExpiryTimeobsolete Time till entry will expire.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.55.5.4.1.8
rlIgmpMldSnoopMembershipCompatibilityMode IGMP/MLD group compatibility mode.	IgmpVersion Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.89.55.5.4.1.9

The table lists the per vlan parameters : enable/disable ,
aging-out timers , filter ports and permanent ports.

rlIgmpMldSnoopVlanEntry row .1.3.6.1.4.1.89.55.5.5.1

An entry (conceptual row) in the rlIgmpSnoopVlanTable.

Indexes

rlIgmpMldSnoopVlanInetAddressType rlIgmpMldSnoopVlanTag

Column	Syntax	OID
rlIgmpMldSnoopVlanInetAddressType Inet type ipv6/ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.55.5.5.1.1
rlIgmpMldSnoopVlanTag The tag of the VLAN for which this entry contains information for an IP Multicast Router.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.55.5.5.1.2
rlIgmpMldSnoopVlanEnable Enable/Disable IGMP Snooping in the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.5.5.1.3
rlIgmpMldSnoopVlanRouterLearn Enable/Disable of Learning of routers in the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.5.5.1.4
rlIgmpMldSnoopVlanHostTimeOutobsolete The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan.	secondsInteger32r/w Constraints: range: 60-2147483647	.1.3.6.1.4.1.89.55.5.5.1.5
rlIgmpMldSnoopVlanQuerierTimeOutobsolete The amount of time where no query is heard until querier is activated	secondsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.55.5.5.1.6
rlIgmpMldSnoopVlanRouterTimeOutobsolete The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan.	secondsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.55.5.5.1.7
rlIgmpMldSnoopVlanLeaveTimeOutobsolete The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.55.5.5.1.8
rlIgmpMldSnoopVlanIgmpVersion The current IGMP protocol version running on the VLAN.	IgmpVersion Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.89.55.5.5.1.9
rlIgmpMldSnoopVlanRouterPortlist List of router ports learned dynamically from PIM, DVMRP, MRDISC, MOSPF and IGMP/MLD Query messages on this VLAN	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.89.55.5.5.1.10
rlIgmpMldSnoopVlanRouterStaticPortlist List of router ports configured statically on this VLAN.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.55.5.5.1.11
rlIgmpMldSnoopVlanRouterForbiddenPortlist List of ports statically configured to NOT be router ports on this VLAN	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.55.5.5.1.12
rlIgmpMldSnoopVlanQueryOverride Enable/Disable overriding of Query values	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.5.5.1.13
rlIgmpMldSnoopVlanOperRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP and MLD are robust to (Robustness Variable-1) packet …	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.89.55.5.5.1.14
rlIgmpMldSnoopVlanOperQueryInterval The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value.	millisecondsUnsigned32 Constraints: range: 1000-31744000	.1.3.6.1.4.1.89.55.5.5.1.15
rlIgmpMldSnoopVlanOperQueryMaxResponseTime The maximum query response interval advertised in MGMDv2 or v3 queries on this interface.	millisecondsUnsigned32 Constraints: range: 0-8387584	.1.3.6.1.4.1.89.55.5.5.1.16
rlIgmpMldSnoopVlanOperLastMemberQueryInterval The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. Thi…	millisecondsUnsigned32 Constraints: range: 0-8387584	.1.3.6.1.4.1.89.55.5.5.1.17
rlIgmpMldSnoopVlanOperLastMemberQueryCount Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.89.55.5.5.1.18
rlIgmpMldSnoopVlanOperStartupQueryInterval This variable represents the interval between General Queries sent by a Querier on startup.	millisecondsUnsigned32 Constraints: range: 0-31744000	.1.3.6.1.4.1.89.55.5.5.1.19
rlIgmpMldSnoopVlanOperStartupQueryCount Represents the number of Queries sent out on startup separated by the Startup Query Interval.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.89.55.5.5.1.20
rlIgmpMldSnoopVlanOperHostTimeOut The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIgmpMldSnoopVlanOperQueryInterval + rlIgm…	millisecondsUnsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.55.5.5.1.21
rlIgmpMldSnoopVlanOperRouterTimeOut The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIgmpMldSnoopVlanOperQueryInterval }	millisecondsUnsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.55.5.5.1.22
rlIgmpMldSnoopVlanOperLeaveTimeOut The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. DEFVAL { rlIgmpMldSnoopVlanOperLastMem…	millisecondsUnsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.55.5.5.1.23
rlIgmpMldSnoopVlanAdminRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP and MLD are robust to (Robustness Variable-1) packet …	Unsigned32r/w Constraints: range: 1-7	.1.3.6.1.4.1.89.55.5.5.1.24
rlIgmpMldSnoopVlanAdminQueryInterval The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value.	millisecondsUnsigned32r/w Constraints: range: 1000-18000000	.1.3.6.1.4.1.89.55.5.5.1.25
rlIgmpMldSnoopVlanAdminQueryMaxResponseTime The maximum query response interval advertised in MGMDv2 or v3 queries on this interface.	millisecondsUnsigned32r/w Constraints: range: 1000-20000	.1.3.6.1.4.1.89.55.5.5.1.26
rlIgmpMldSnoopVlanAdminLastMemberQueryInterval The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. Thi…	millisecondsUnsigned32r/w Constraints: range: 100-25500	.1.3.6.1.4.1.89.55.5.5.1.27
rlIgmpMldSnoopVlanAdminLastMemberQueryCount Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members. Value 0 is used to indicate usage of default value. DEFVAL { rlIgmpMldSno…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.89.55.5.5.1.28
rlIgmpMldSnoopVlanAdminStartupQueryInterval This variable represents the interval between General Queries sent by a Querier on startup.	millisecondsUnsigned32r/w Constraints: range: 0-4500000	.1.3.6.1.4.1.89.55.5.5.1.29
rlIgmpMldSnoopVlanAdminStartupQueryCount Represents the number of Queries sent out on startup separated by the Startup Query Interval.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.89.55.5.5.1.30
rlIgmpMldSnoopVlanAdminHostTimeOutobsolete The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlIgmpMldSnoopVlanAdminQueryInterval + rlI…	millisecondsUnsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.55.5.5.1.31
rlIgmpMldSnoopVlanAdminRouterTimeOutobsolete The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlIgmpMldSnoopVlanAdminQueryInterval }	millisecondsUnsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.55.5.5.1.32
rlIgmpMldSnoopVlanAdminLeaveTimeOutobsolete The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. DEFVAL { rlIgmpMldSnoopVlanAdminLastMe…	millisecondsUnsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.55.5.5.1.33
rlIgmpMldSnoopVlanIsImmediateLeave Enable/Disable immediate leave on this Vlan	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.5.5.1.34

multicast vlan used for this port

rlIgmpMldSnoopMulticastTvEntry row .1.3.6.1.4.1.89.55.5.6.1

entry of multicast ip

Indexes

rlIgmpMldSnoopMulticastTvInetAddressType rlIgmpMldSnoopMulticastTvVID rlIgmpMldSnoopMulticastTvGroupAddressType rlIgmpMldSnoopMulticastTvGroup

Column	Syntax	OID
rlIgmpMldSnoopMulticastTvInetAddressType Inet type ipv6/ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.55.5.6.1.1
rlIgmpMldSnoopMulticastTvVID Specify the multicast ip to be used.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.55.5.6.1.2
rlIgmpMldSnoopMulticastTvGroupAddressType Inet type ipv6/ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.55.5.6.1.3
rlIgmpMldSnoopMulticastTvGroup Specify the multicast ip to be used.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.89.55.5.6.1.4
rlIgmpMldSnoopMulticastTvStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.55.5.6.1.5

A table that contains MLD Snooping Querier information about
every vlan. This is indexed by vlan tag.

rlMldSnoopQuerierVlanEntry row .1.3.6.1.4.1.89.55.5.7.1

An entry (conceptual row) in the rlMldSnoopQuerierVlanTable.

Indexes

rlMldSnoopQuerierVlanTag

Column	Syntax	OID
rlMldSnoopQuerierVlanTag An MLD Snoop Querier entry vlan tag.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.55.5.7.1.1
rlMldSnoopQuerierAdminEnable The desired administrative state of MLD Snoop Querier on the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.5.7.1.2
rlMldSnoopQuerierOperEnable The current operational state of MLD Snoop Querier on the vlan.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.5.7.1.3
rlMldSnoopQuerierAdminAddrInetAddressType Inet type IPv6/IPv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.55.5.7.1.4
rlMldSnoopQuerierAdminAddr The desired IP address is being used in MLD Snoop Querier messages on the vlan.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.89.55.5.7.1.5
rlMldSnoopQuerierOperAddrInetAddressType Inet type IPv6/IPv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.55.5.7.1.6
rlMldSnoopQuerierOperAddr The current operational IP address is being used in MLD Snoop Querier messages on the vlan.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.89.55.5.7.1.7
rlMldSnoopQuerierAdminVersionNumber The highest version number of MLD Snoop Querier for the vlan.	MldVersionr/w Type Values: 0 none 1 v1 2 v2	.1.3.6.1.4.1.89.55.5.7.1.8
rlMldSnoopQuerierOperVersionNumber The current operational version number of MLD Snoop Querier for the vlan.	MldVersion Type Values: 0 none 1 v1 2 v2	.1.3.6.1.4.1.89.55.5.7.1.9
rlMldSnoopQuerierElectionEnable Whether or not to participate in querier election. When true, the snooping querier participates in querier election. When false, the snooping querier is the elected querier until a general query is heard from another ro…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.55.5.7.1.10

A table that contains IGMP/MLD Snooping Querier global address.

rlIgmpMldSnoopQuerierGlobalAddressEntry row .1.3.6.1.4.1.89.55.5.9.1

An entry (conceptual row) in the rlIgmpMldSnoopQuerierGlobalAddressTable.

Indexes

rlIgmpMldSnoopQuerierGlobalAddressIPVersion

Column	Syntax	OID
rlIgmpMldSnoopQuerierGlobalAddressIPVersion The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g., IPv4 and IPv6; however, the traffic is considered to be logically separate.	INET-ADDRESS-MIBInetVersion Type Values: 0 unknown 1 ipv4 2 ipv6	.1.3.6.1.4.1.89.55.5.9.1.1
rlIgmpMldSnoopQuerierGlobalAddressType Inet type IPv6/IPv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.55.5.9.1.2
rlIgmpMldSnoopQuerierGlobalAddress The desired address to used in IGMP/MLD Snoop Querier messages if such an address is not configured on the vlan.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.89.55.5.9.1.3