RADLAN-OSPFV3-MIB Table View

OSPFv3 Instance General Variables

rlOspfv3GeneralGroupEntry row .1.3.6.1.4.1.89.216.2.1

Information describing the configured global parame-
ters to the Router OSPFv3 Process.

Indexes

rlOspfv3ProcessId

Column	Syntax	OID
rlOspfv3ProcessId A 32-bit integer uniquely identifying an OSPFv3 process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.2.1.1
rlOspfv3RouterId A 32-bit unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the 32-bit unsigned integer representation of one of the router's IPv4 interface addresses (…	OSPF-MIBRouterIDr/w	.1.3.6.1.4.1.89.216.2.1.2
rlOspfv3AdminStatus The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one interface; 'disabled' disables it on all interfaces. This object is persis…	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.89.216.2.1.3
rlOspfv3VersionNumber The version number of OSPF for IPv6 is 3.	Enumeration Enumerated Values: 3 version3	.1.3.6.1.4.1.89.216.2.1.4
rlOspfv3AreaBdrRtrStatus A flag to denote whether this router is an area border router. The value of this object is true (1) when the router is an area border router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.2.1.5
rlOspfv3ASBdrRtrStatus A flag to note whether this router is configured as an Autonomous System border router. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.2.1.6
rlOspfv3AsScopeLsaCount The number of AS-scope (e.g., AS-External) link state advertisements in the link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.2.1.7
rlOspfv3AsScopeLsaCksumSum The 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state databas…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.2.1.8
rlOspfv3OriginateNewLsas The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in the value of this counter can occur at re-i…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.2.1.9
rlOspfv3RxNewLsas The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements. Discontinuit…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.2.1.10
rlOspfv3ExtLsaCount The number of External (LS type 0x4005) in the link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.2.1.11
rlOspfv3ExtAreaLsdbLimit The maximum number of non-default AS-external-LSA entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a r…	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.89.216.2.1.12
rlOspfv3ExitOverflowInterval The number of seconds that, after entering Overflow state, a router will attempt to leave Overflow state. This allows the router to again originate non-default, AS-External-LSAs. When set to 0, the router will not lea…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.2.1.13
rlOspfv3DemandExtensions The router's support for demand circuits. The value of this object is true (1) when demand circuits are supported. This object is persistent, and when written, the entity SHOULD save the change to non-vol…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.2.1.14
rlOspfv3ReferenceBandwidth Reference bandwidth in kilobits per second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent, and when written, the entity SHOULD save the…	kilobits per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.2.1.15
rlOspfv3RestartSupport The router's support for OSPF graceful restart. Options include no restart support, only planned restarts, or both planned and unplanned restarts. This object is persistent, and when written, the entity S…	Enumerationr/w Enumerated Values: 1 none 2 plannedOnly 3 plannedAndUnplanned	.1.3.6.1.4.1.89.216.2.1.16
rlOspfv3RestartInterval Configured OSPF graceful restart timeout interval. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.	secondsOSPFV3-MIBOspfv3UpToRefreshIntervalTCr/w Type Constraints: range: 1..1800	.1.3.6.1.4.1.89.216.2.1.17
rlOspfv3RestartStrictLsaChecking Indicates if strict LSA checking is enabled for graceful restart. A value of true (1) indicates that strict LSA checking is enabled. This object is persistent, and when written, the entity SHOULD save th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.2.1.18
rlOspfv3RestartStatus The current status of OSPF graceful restart capability.	Enumeration Enumerated Values: 1 notRestarting 2 plannedRestart 3 unplannedRestart	.1.3.6.1.4.1.89.216.2.1.19
rlOspfv3RestartAge Remaining time in the current OSPF graceful restart interval.	secondsOSPFV3-MIBOspfv3UpToRefreshIntervalTC Type Constraints: range: 1..1800	.1.3.6.1.4.1.89.216.2.1.20
rlOspfv3RestartExitReason Describes the outcome of the last attempt at a graceful restart. none: no restart has yet been attempted. inProgress: a restart attempt is currently underway. completed: the last res…	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.89.216.2.1.21
rlOspfv3NotificationEnable This object provides a coarse level of control over the generation of OSPFv3 notifications. If this object is set to true (1), then it enables the generation of OSPFv3 notifications. If it is set to fals…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.2.1.22
rlOspfv3StubRouterSupport The router's support for stub router functionality. An object value of true (1) indicates that stub router functionality is supported.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.2.1.23
rlOspfv3StubRouterAdvertisement This object controls the advertisement of stub LSAs by the router. The value doNotAdvertise (1) will result in the advertisement of standard LSAs and is the default value. This object is persistent, and …	Enumerationr/w Enumerated Values: 1 doNotAdvertise 2 advertise	.1.3.6.1.4.1.89.216.2.1.24
rlOspfv3DiscontinuityTime The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subs…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.89.216.2.1.25
rlOspfv3RestartTime The value of sysUpTime on the most recent occasion at which the ospfv3RestartExitReason was updated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.89.216.2.1.26
rlOspfv3OperStatus The current operational state of the OSPF in the router.	Enumeration Enumerated Values: 1 up 2 down 3 goingUp 4 goingDown 5 actFailed	.1.3.6.1.4.1.89.216.2.1.27
rlOspfv3RowStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.216.2.1.28
rlOspfv3LogAdjacencyChanges Configure the router to send a syslog message when an OSPF neighbor goes up or down. detail ? sends a syslog message for each state change, not just when a neighbor goes up or down	Enumerationr/w Enumerated Values: 1 enable 2 detail 3 disable	.1.3.6.1.4.1.89.216.2.1.29
rlOspfv3PassiveInterface A flag to note whether to disable sending OSPF routing updates on all OSPF IP interfaces.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.2.1.30
rlOspfv3DefaultMetric A default metric helps solve the problem of redistributing routes with incompatible metrics. Whenever metrics do not convert, using a default metric provides a reasonable substitute and enables the redistribution to pro…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.216.2.1.31
rlOspfv3MaximumRedistPrefixNum Specifies the maximum number of IP prefixes that can be redistributed into OSPF.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.216.2.1.32
rlOspfv3MaximumRedistPrefixThreshold Threshold value, as a percentage, at which a warning message should be generated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.216.2.1.33
rlOspfv3MaximumRedistPrefixWarningOnly Causes a warning message to be logged when the number of prefixes defined by the maximum argumenthas been exceeded. Additional redistribution is not prevented.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.2.1.34
rlOspfv3NextRouterId A 32-bit integer uniquely identifying the of router in the Autonomous System after restart. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.	OSPF-MIBRouterID	.1.3.6.1.4.1.89.216.2.1.35
rlOspfv3RouterIdType Type of router identifier - default value or manually set by user.	RADLAN-OSPF-MIBRlOspfRouterIdType Type Values: 1 default 2 manual Description: The reason for exiting an attempted graceful restart.	.1.3.6.1.4.1.89.216.2.1.36
rlOspfv3NextRouterIdType Type of router identifier after restart - default value or manually set by user.	RADLAN-OSPF-MIBRlOspfRouterIdType Type Values: 1 default 2 manual Description: The reason for exiting an attempted graceful restart.	.1.3.6.1.4.1.89.216.2.1.37
rlOspfv3ASBdrRtrActualStatus A flag to note whether this router is an Autonomous System Border Router. note: rlOspfASBdrRtrStatus field is the configuration and this filed is the actual ASBR status	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.2.1.38
rlOspfv3CalcMaxDelay The maximum delay before the Routing Table is recalculated following a change to the Link State Database. (Recalculation is delayed to reduce the frequency of recalculations of the Routing Table). This p…	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.2.1.39
rlOspfv3RteMaxEqCostPaths The maximum number of equal cost paths that are stored for each destination in the Routing Table.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.89.216.2.1.40

Information describing the configured
parameters and cumulative statistics of the router's
attached areas.  The interfaces and
virtual links are configured as part of these areas.
Area 0, by definition, is the backbone area.

rlOspfv3AreaEntry row .1.3.6.1.4.1.89.216.3.1

Information describing the configured
parameters and cumulative statistics of one of the
router's attached areas.

The information in this table is persistent,
and when written, the entity SHOULD save the a
…

Indexes

rlOspfv3AreaProcessId rlOspfv3AreaId

Column	Syntax	OID
rlOspfv3AreaProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.3.1.1
rlOspfv3AreaId A 32-bit unsigned integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone.	OSPF-MIBAreaID	.1.3.6.1.4.1.89.216.3.1.2
rlOspfv3AreaImportAsExtern Indicates whether an area is a stub area, NSSA, or standard area. AS-scope LSAs are not imported into stub areas or NSSAs. NSSAs import AS-External data as NSSA LSAs that have Area-scope.	Enumerationr/w Enumerated Values: 1 importExternal 2 importNoExternal 3 importNssa	.1.3.6.1.4.1.89.216.3.1.3
rlOspfv3AreaSpfRuns The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. Discontinuities in the value of this coun…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.3.1.4
rlOspfv3AreaBdrRtrCount The total number of area border routers reachable within this area. This is initially zero, and is calculated in each Shortest Path First (SPF) pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.3.1.5
rlOspfv3AreaAsBdrRtrCount The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.3.1.6
rlOspfv3AreaScopeLsaCount The total number of Area-scope link state advertisements in this area's link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.3.1.7
rlOspfv3AreaScopeLsaCksumSum The 32-bit unsigned sum of the Area-scope link state advertisements' LS checksums contained in this area's link state database. The sum can be used to determine if there has been a change in a router's link state datab…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.3.1.8
rlOspfv3AreaSummary The variable rlOspfv3AreaSummary controls the import of Inter-Area LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate …	Enumerationr/w Enumerated Values: 1 noAreaSummary 2 sendAreaSummary	.1.3.6.1.4.1.89.216.3.1.9
rlOspfv3AreaRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.216.3.1.10
rlOspfv3AreaStubMetric The metric value advertised for the default route into stub and NSSA areas. By default, this equals the least metric among the interfaces to other areas.	OSPF-MIBBigMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.89.216.3.1.11
rlOspfv3AreaNssaTranslatorRole Indicates an NSSA border router's policy to perform NSSA translation of NSSA-LSAs into AS-External-LSAs.	Enumerationr/w Enumerated Values: 1 always 2 candidate	.1.3.6.1.4.1.89.216.3.1.12
rlOspfv3AreaNssaTranslatorState Indicates if and how an NSSA border router is performing NSSA translation of NSSA-LSAs into AS-External-LSAs. When this object is set to 'enabled', the NSSA border router's rlOspfv3AreaNssaTranslatorRole has been set t…	Enumeration Enumerated Values: 1 enabled 2 elected 3 disabled	.1.3.6.1.4.1.89.216.3.1.13
rlOspfv3AreaNssaTranslatorStabInterval The stability interval defined as the number of seconds after an elected translator determines its services are no longer required that it should continue to perform its translation duties.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.3.1.14
rlOspfv3AreaNssaTranslatorEvents Indicates the number of Translator state changes that have occurred since the last start-up of the OSPFv3 routing process. Discontinuities in the value of this counter can occur at re-initialization of th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.3.1.15
rlOspfv3AreaStubMetricType This variable assigns the type of metric advertised as a default route.	Enumerationr/w Enumerated Values: 1 rlOspfv3Metric 2 comparableCost 3 nonComparable	.1.3.6.1.4.1.89.216.3.1.16
rlOspfv3AreaTEEnabled Indicates whether or not traffic engineering is enabled in the area. The object is set to the value true (1) to enable traffic engineering. Traffic engineering is disabled by default.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.3.1.17
rlOspfv3AreaAdminStat The OSPF Area's administrative status. The value formed on the area, and the in- terfaces associated with the area. The value 'disabled' denotes that the area is external to OSPF.	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.89.216.3.1.18
rlOspfv3AreaOperStatus The current operational state of the OSPF Area.	Enumeration Enumerated Values: 1 up 2 down 3 goingUp 4 goingDown 5 actFailed	.1.3.6.1.4.1.89.216.3.1.19
rlOspfv3AreaFilterPrefixListIn The prefix list is applied to prefixes advertised to the specified area from other areas.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.89.216.3.1.20
rlOspfv3AreaFilterPrefixListOut The prefix list is applied to prefixes advertised out of the specified area to other areas.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.89.216.3.1.21

The OSPFv3 Process's AS-scope link state database
(LSDB).  The LSDB contains the AS-scope link state
advertisements from throughout the areas that the
device is attached to.

rlOspfv3AsLsdbEntry row .1.3.6.1.4.1.89.216.4.1

A single AS-scope link state advertisement.

Indexes

rlOspfv3AsLsdbProcessId rlOspfv3AsLsdbType rlOspfv3AsLsdbRouterId rlOspfv3AsLsdbLsid

Column	Syntax	OID
rlOspfv3AsLsdbProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.4.1.1
rlOspfv3AsLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. AS-scope LSAs not recognized by the router may be stored in the database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.89.216.4.1.2
rlOspfv3AsLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.89.216.4.1.3
rlOspfv3AsLsdbLsid The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressin…	RlLsID Description: A unique 32-bit identifier of the piece of the routing domain that is being described by a link state advertisement. In contrast to OSPFv2, the Link State ID (LSID) has no addressing semantics.	.1.3.6.1.4.1.89.216.4.1.4
rlOspfv3AsLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more rece…	OSPFV3-MIBOspfv3LsaSequenceTC	.1.3.6.1.4.1.89.216.4.1.5
rlOspfv3AsLsdbAge This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.	secondsOSPFV3-MIBOspfv3LsaAgeTC Type Constraints: range: 0..3600 range: 32768..36368	.1.3.6.1.4.1.89.216.4.1.6
rlOspfv3AsLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.216.4.1.7
rlOspfv3AsLsdbAdvertisement The entire link state advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.89.216.4.1.8
rlOspfv3AsLsdbTypeKnown The value true (1) indicates that the LSA type is recognized by this router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.4.1.9

The OSPFv3 Process's Area-scope LSDB.
The LSDB contains the Area-scope link state
advertisements from throughout the area that the
device is attached to.

rlOspfv3AreaLsdbEntry row .1.3.6.1.4.1.89.216.5.1

A single Area-scope link state advertisement.

Indexes

rlOspfv3AreaLsdbProcessId rlOspfv3AreaLsdbAreaId rlOspfv3AreaLsdbType rlOspfv3AreaLsdbRouterId rlOspfv3AreaLsdbLsid

Column	Syntax	OID
rlOspfv3AreaLsdbProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.5.1.1
rlOspfv3AreaLsdbAreaId The 32-bit identifier of the Area from which the LSA was received.	OSPF-MIBAreaID	.1.3.6.1.4.1.89.216.5.1.2
rlOspfv3AreaLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. Area-scope LSAs unrecognized by the router are also stored in this database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.89.216.5.1.3
rlOspfv3AreaLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.89.216.5.1.4
rlOspfv3AreaLsdbLsid The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressin…	RlLsID Description: A unique 32-bit identifier of the piece of the routing domain that is being described by a link state advertisement. In contrast to OSPFv2, the Link State ID (LSID) has no addressing semantics.	.1.3.6.1.4.1.89.216.5.1.5
rlOspfv3AreaLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more rece…	OSPFV3-MIBOspfv3LsaSequenceTC	.1.3.6.1.4.1.89.216.5.1.6
rlOspfv3AreaLsdbAge This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.	secondsOSPFV3-MIBOspfv3LsaAgeTC Type Constraints: range: 0..3600 range: 32768..36368	.1.3.6.1.4.1.89.216.5.1.7
rlOspfv3AreaLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.216.5.1.8
rlOspfv3AreaLsdbAdvertisement The entire link state advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.89.216.5.1.9
rlOspfv3AreaLsdbTypeKnown The value true (1) indicates that the LSA type is recognized by this router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.5.1.10

The OSPFv3 Process's Link-scope LSDB for non-virtual
interfaces.  The LSDB contains the Link-scope link
state advertisements from the interfaces that the
device is attached to.

rlOspfv3LinkLsdbEntry row .1.3.6.1.4.1.89.216.6.1

A single Link-scope link state advertisement.

Indexes

rlOspfv3LinkLsdbProcessId rlOspfv3LinkLsdbIfIndex rlOspfv3LinkLsdbIfInstId rlOspfv3LinkLsdbType rlOspfv3LinkLsdbRouterId rlOspfv3LinkLsdbLsid

Column	Syntax	OID
rlOspfv3LinkLsdbProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.6.1.1
rlOspfv3LinkLsdbIfIndex The identifier of the link from which the LSA was received.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.216.6.1.2
rlOspfv3LinkLsdbIfInstId The identifier of the interface instance from which the LSA was received.	OSPFV3-MIBOspfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.6.1.3
rlOspfv3LinkLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. Link-scope LSAs unrecognized by the router are also stored in this database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.89.216.6.1.4
rlOspfv3LinkLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.89.216.6.1.5
rlOspfv3LinkLsdbLsid The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressin…	RlLsID Description: A unique 32-bit identifier of the piece of the routing domain that is being described by a link state advertisement. In contrast to OSPFv2, the Link State ID (LSID) has no addressing semantics.	.1.3.6.1.4.1.89.216.6.1.6
rlOspfv3LinkLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more rece…	OSPFV3-MIBOspfv3LsaSequenceTC	.1.3.6.1.4.1.89.216.6.1.7
rlOspfv3LinkLsdbAge This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.	secondsOSPFV3-MIBOspfv3LsaAgeTC Type Constraints: range: 0..3600 range: 32768..36368	.1.3.6.1.4.1.89.216.6.1.8
rlOspfv3LinkLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.216.6.1.9
rlOspfv3LinkLsdbAdvertisement The entire link state advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.89.216.6.1.10
rlOspfv3LinkLsdbTypeKnown The value true (1) indicates that the LSA type is recognized by this router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.6.1.11

The Host/Metric Table indicates what hosts are
directly attached to the router and their
corresponding metrics.

rlOspfv3HostEntry row .1.3.6.1.4.1.89.216.7.1

A metric to be advertised when a given host is
reachable.

The information in this table is persistent, and
when written, the entity SHOULD save the change
to non-volatile storage.

Indexes

rlOspfv3HostProcessId rlOspfv3HostAddressType rlOspfv3HostAddress

Column	Syntax	OID
rlOspfv3HostProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.7.1.1
rlOspfv3HostAddressType The address type of rlOspfv3HostAddress. Only IPv6 global address type is expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.216.7.1.2
rlOspfv3HostAddress The IPv6 address of the host. Must be an IPv6 global address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.7.1.3
rlOspfv3HostMetric The metric to be advertised.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.89.216.7.1.4
rlOspfv3HostRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.216.7.1.5
rlOspfv3HostAreaID The Area the host entry is to be found within. By default, the area for the subsuming OSPFv3 interface, or Area 0 if there is no subsuming interface.	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.89.216.7.1.6

The OSPFv3 Interface Table describes the
interfaces from the viewpoint of OSPFv3.

rlOspfv3IfEntry row .1.3.6.1.4.1.89.216.8.1

The OSPFv3 Interface Entry describes one
interface from the viewpoint of OSPFv3.

The information in this table is persistent,
and when written, the entity SHOULD save the
change to non-volatile storage.

Indexes

rlOspfv3IfProcessId rlOspfv3IfIndex rlOspfv3IfInstId

Column	Syntax	OID
rlOspfv3IfProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.8.1.1
rlOspfv3IfIndex The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.216.8.1.2
rlOspfv3IfInstId Enables multiple interface instances of OSPFv3 to be run over a single link. Each interface instance would be assigned a separate ID. This ID has local link significance only.	OSPFV3-MIBOspfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.8.1.3
rlOspfv3IfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone.	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.89.216.8.1.4
rlOspfv3IfType The OSPFv3 interface type.	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint	.1.3.6.1.4.1.89.216.8.1.5
rlOspfv3IfAdminStatus The OSPFv3 interface's administrative status. The value formed on the interface; the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPFv3…	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.89.216.8.1.6
rlOspfv3IfRtrPriority The priority of this interface. Used in multi-access networks, this field is used in the designated-router election algorithm. The value 0 signifies that the router is not eligible to become the Designated Router on t…	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.8.1.7
rlOspfv3IfTransitDelay The estimated number of seconds it takes to transmit a Link State Update packet over this interface. LSAs contained in the update packet must have their age incremented by this amount before transmission. This value s…	secondsRlOspfv3UpToRefreshIntervalTCr/w Type Constraints: range: 1..65535 Description: The values one might be able to configure for variables bounded by the Refresh Interval.	.1.3.6.1.4.1.89.216.8.1.8
rlOspfv3IfRetransInterval The number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State Request packets.	secondsRlOspfv3UpToRefreshIntervalTCr/w Type Constraints: range: 1..65535 Description: The values one might be able to configure for variables bounded by the Refresh Interval.	.1.3.6.1.4.1.89.216.8.1.9
rlOspfv3IfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.	secondsOSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.89.216.8.1.10
rlOspfv3IfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for a…	secondsOSPFV3-MIBOspfv3DeadIntervalRangeTCr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.89.216.8.1.11
rlOspfv3IfPollInterval The larger time interval, in seconds, between the Hello packets sent to an inactive, non-broadcast multi-access neighbor.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.8.1.12
rlOspfv3IfState The OSPFv3 interface state. An interface may be in standby state if there are multiple interfaces on the link and another interface is active. The interface may be in Down state if the underlying IPv6 interface is dow…	Enumeration Enumerated Values: 1 down 2 loopback 3 waiting 4 pointToPoint 5 designatedRouter 6 backupDesignatedRouter 7 otherDesignatedRouter 8 standby	.1.3.6.1.4.1.89.216.8.1.13
rlOspfv3IfDesignatedRouter The Router ID of the Designated Router.	OSPF-MIBRouterID	.1.3.6.1.4.1.89.216.8.1.14
rlOspfv3IfBackupDesignatedRouter The Router ID of the Backup Designated Router.	OSPF-MIBRouterID	.1.3.6.1.4.1.89.216.8.1.15
rlOspfv3IfEvents The number of times this OSPFv3 interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.8.1.16
rlOspfv3IfRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.216.8.1.17
rlOspfv3IfDemand Indicates whether Demand OSPFv3 procedures (Hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.8.1.18
rlOspfv3IfMetricValue The metric assigned to this interface. The default value of the metric is 'Reference Bandwidth / ifSpeed'. The value of the reference bandwidth can be set in the rlOspfv3ReferenceBandwidth object.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.89.216.8.1.19
rlOspfv3IfLinkScopeLsaCount The total number of Link-scope link state advertisements in this link's link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.8.1.20
rlOspfv3IfLinkLsaCksumSum The 32-bit unsigned sum of the Link-scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determine if there has been a change in a router's link state datab…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.8.1.21
rlOspfv3IfDemandNbrProbe Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.8.1.22
rlOspfv3IfDemandNbrProbeRetransLimit The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.8.1.23
rlOspfv3IfDemandNbrProbeInterval Defines how often the neighbor will be probed.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.8.1.24
rlOspfv3IfTEDisabled Indicates whether or not traffic engineering is disabled on the interface when traffic engineering is enabled in the area where the interface is attached. The object is set to the value true (1) to disable traffic engi…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.8.1.25
rlOspfv3IfLinkLSASuppression Specifies whether or not link LSA origination is suppressed for broadcast or NBMA interface types. The object is set to value true (1) to suppress the origination.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.8.1.26
rlOspfv3IfOperStatus The current operational state of the OSPF interface.	Enumeration Enumerated Values: 1 up 2 down 3 goingUp 4 goingDown 5 actFailed	.1.3.6.1.4.1.89.216.8.1.27
rlOspfv3IfPassive Indicates whether this interface is a passive interface. If set to TRUE, we suppress HELLO packets sent on and received from this interface. We will therefore advertise this interface in our LSAs but not run OSPF prot…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.8.1.28
rlOspfv3IfLsaRefreshIntvl Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval between refreshes of LSAs that are only flooded over this inter…	secondsInteger32r/w Constraints: range: 1-3599	.1.3.6.1.4.1.89.216.8.1.29
rlOspfv3IfFastHelloMultiplier The number of Hellos that should be sent within 1 second when using Fast Hellos on this interface. This value does not have to be same for all routers attached to a common network, but it is advisable. Fast Hellos are…	RlOspfv3FastHelloMultiplierRanger/w Type Constraints: range: 3..20 Description: The range of hello multipliers that determine how often Fast Hellos are exchanged.	.1.3.6.1.4.1.89.216.8.1.30
rlOspfv3IfMtuIgnore This object controls whether DC-OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description packet is higher than the MTU size configured on the incoming …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.8.1.31
rlOspfv3IfNameLookup A flag to note whether to look up Domain Name System (DNS) names for use in all OSPF show EXEC command displays.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.8.1.32

Information about this router's virtual
interfaces that the OSPFv3 Process is configured
to carry on.

rlOspfv3VirtIfEntry row .1.3.6.1.4.1.89.216.9.1

Information about a single virtual interface.

The information in this table is persistent,
and when written, the entity SHOULD save the
change to non-volatile storage.

Indexes

rlOspfv3VirtIfProcessId rlOspfv3VirtIfAreaId rlOspfv3VirtIfNeighbor

Column	Syntax	OID
rlOspfv3VirtIfProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.9.1.1
rlOspfv3VirtIfAreaId The transit area that the virtual link traverses. By definition, this is not Area 0.	OSPF-MIBAreaID	.1.3.6.1.4.1.89.216.9.1.2
rlOspfv3VirtIfNeighbor The Router ID of the virtual neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.89.216.9.1.3
rlOspfv3VirtIfIndex The local interface index assigned by the OSPFv3 Process to this OSPFv3 virtual interface. It is advertised in Hellos sent over the virtual link and in the router's router-LSAs.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.216.9.1.4
rlOspfv3VirtIfInstId The local Interface Instance ID assigned by the OSPFv3 Process to this OSPFv3 virtual interface.	OSPFV3-MIBOspfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.9.1.5
rlOspfv3VirtIfTransitDelay The estimated number of seconds it takes to transmit a Link State Update packet over this interface.	secondsRlOspfv3UpToRefreshIntervalTCr/w Type Constraints: range: 1..65535 Description: The values one might be able to configure for variables bounded by the Refresh Interval.	.1.3.6.1.4.1.89.216.9.1.6
rlOspfv3VirtIfRetransInterval The number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State Request packets. This…	secondsRlOspfv3UpToRefreshIntervalTCr/w Type Constraints: range: 1..65535 Description: The values one might be able to configure for variables bounded by the Refresh Interval.	.1.3.6.1.4.1.89.216.9.1.7
rlOspfv3VirtIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.	secondsOSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.89.216.9.1.8
rlOspfv3VirtIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neig…	secondsOSPFV3-MIBOspfv3DeadIntervalRangeTCr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.89.216.9.1.9
rlOspfv3VirtIfState OSPF virtual interface states. The same encoding as the ospfV3IfTable is used.	Enumeration Enumerated Values: 1 down 4 pointToPoint	.1.3.6.1.4.1.89.216.9.1.10
rlOspfv3VirtIfEvents The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.9.1.11
rlOspfv3VirtIfRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.216.9.1.12
rlOspfv3VirtIfLinkScopeLsaCount The total number of Link-scope link state advertisements in this virtual link's link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.9.1.13
rlOspfv3VirtIfLinkLsaCksumSum The 32-bit unsigned sum of the Link-scope link state advertisements' LS checksums contained in this virtual link's link state database. The sum can be used to determine if there has been a change in a router's link sta…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.9.1.14
rlOspfv3VirtIfAdminStatus The desired administrative state of this virtual interface.	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.89.216.9.1.15
rlOspfv3VirtIfOperStatus The current operational state of this virtual interface.	Enumeration Enumerated Values: 1 up 2 down 3 goingUp 4 goingDown 5 actFailed	.1.3.6.1.4.1.89.216.9.1.16

A table describing all neighbors in the
locality of the OSPFv3 router.

rlOspfv3NbrEntry row .1.3.6.1.4.1.89.216.10.1

The information regarding a single neighbor.

Indexes

rlOspfv3NbrProcessId rlOspfv3NbrIfIndex rlOspfv3NbrIfInstId rlOspfv3NbrRtrId

Column	Syntax	OID
rlOspfv3NbrProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.10.1.1
rlOspfv3NbrIfIndex The Local Link ID of the link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.216.10.1.2
rlOspfv3NbrIfInstId Interface instance over which the neighbor can be reached. This ID has local link significance only.	OSPFV3-MIBOspfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.10.1.3
rlOspfv3NbrRtrId A 32-bit unsigned integer uniquely identifying the neighboring router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.89.216.10.1.4
rlOspfv3NbrAddressType The address type of rlOspfv3NbrAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.216.10.1.5
rlOspfv3NbrAddress The IPv6 address of the neighbor associated with the local link.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.10.1.6
rlOspfv3NbrOptions A bit mask corresponding to the neighbor's options field.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.216.10.1.7
rlOspfv3NbrPriority The priority of this neighbor in the designated- router election algorithm. The value 0 signifies that the neighbor is not eligible to become the Designated Router on this particular network.	OSPF-MIBDesignatedRouterPriority Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.10.1.8
rlOspfv3NbrState The state of the relationship with this neighbor.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.89.216.10.1.9
rlOspfv3NbrEvents The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.10.1.10
rlOspfv3NbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.10.1.11
rlOspfv3NbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.10.1.12
rlOspfv3NbrIfId The Interface ID that the neighbor advertises in its Hello packets on this link, that is, the neighbor's local interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.216.10.1.13
rlOspfv3NbrRestartHelperStatus Indicates whether the router is acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.4.1.89.216.10.1.14
rlOspfv3NbrRestartHelperAge Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.	secondsOSPFV3-MIBOspfv3UpToRefreshIntervalTC Type Constraints: range: 1..1800	.1.3.6.1.4.1.89.216.10.1.15
rlOspfv3NbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. none: no restart has yet been attempted. inProgress: a restart attempt is currently under…	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.89.216.10.1.16
rlOspfv3NbrDeadTime The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the adjacency down. If fast hellos area in use, this value is always set to 1. If the oper_status is down or o…	OSPF-MIBPositiveInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.89.216.10.1.17
rlOspfv3NbrAreaId The area to which the neighbor belongs. If the oper_status is down, then this value is set to zero and the field is not valid.	OSPF-MIBAreaID	.1.3.6.1.4.1.89.216.10.1.18

A table describing all configured neighbors.
          
The Configured Neighbors table just gives
OSPFv3 information for sending OSPFv3 packets
to potential neighbors and is typically used
on NBMA and Point-to-Multipoint networks.
Once a Hello is received from a neighbor in
the Configured Neighbor table, an entry for
that neighbor is created in the Neighbor table
and adjacency state is maintained there.
Neighbors on multi-access or Point-to-Point
networks can use multicast addressing, so only
Neighbor table entries are created for them.

rlOspfv3CfgNbrEntry row .1.3.6.1.4.1.89.216.11.1

The information regarding a single configured
neighbor.

The information in this table is persistent,
and when written, the entity SHOULD save the
change to non-volatile storage.

Indexes

rlOspf3CfgNbrProcessId rlOspfv3CfgNbrIfIndex rlOspfv3CfgNbrIfInstId rlOspfv3CfgNbrAddressType rlOspfv3CfgNbrAddress

Column	Syntax	OID
rlOspf3CfgNbrProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.11.1.1
rlOspfv3CfgNbrIfIndex The Local Link ID of the link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.216.11.1.2
rlOspfv3CfgNbrIfInstId Interface instance over which the neighbor can be reached. This ID has local link significance only.	OSPFV3-MIBOspfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.11.1.3
rlOspfv3CfgNbrAddressType The address type of rlOspfv3NbrAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.216.11.1.4
rlOspfv3CfgNbrAddress The IPv6 address of the neighbor associated with the local link.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.11.1.5
rlOspfv3CfgNbrPriority The priority of this neighbor in the designated- router election algorithm. The value 0 signifies that the neighbor is not eligible to become the Designated Router on this particular network.	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.11.1.6
rlOspfv3CfgNbrRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.216.11.1.7

A table describing all virtual neighbors.

rlOspfv3VirtNbrEntry row .1.3.6.1.4.1.89.216.12.1

Virtual neighbor information.

Indexes

rlOspfv3VirtNbrProcessId rlOspfv3VirtNbrArea rlOspfv3VirtNbrRtrId

Column	Syntax	OID
rlOspfv3VirtNbrProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.12.1.1
rlOspfv3VirtNbrArea The transit area Identifier.	OSPF-MIBAreaID	.1.3.6.1.4.1.89.216.12.1.2
rlOspfv3VirtNbrRtrId A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.89.216.12.1.3
rlOspfv3VirtNbrIfIndex The local Interface ID for the virtual link over which the neighbor can be reached.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.216.12.1.4
rlOspfv3VirtNbrIfInstId The interface instance for the virtual link over which the neighbor can be reached.	OSPFV3-MIBOspfv3IfInstIdTC Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.12.1.5
rlOspfv3VirtNbrAddressType The address type of rlOspfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.216.12.1.6
rlOspfv3VirtNbrAddress The IPv6 address advertised by this virtual neighbor. It must be a global scope address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.89.216.12.1.7
rlOspfv3VirtNbrOptions A bit mask corresponding to the neighbor's options field.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.216.12.1.8
rlOspfv3VirtNbrState The state of the virtual neighbor relationship.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.89.216.12.1.9
rlOspfv3VirtNbrEvents The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other time…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.12.1.10
rlOspfv3VirtNbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.12.1.11
rlOspfv3VirtNbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.12.1.12
rlOspfv3VirtNbrIfId The Interface ID that the neighbor advertises in its Hello packets on this virtual link, that is, the neighbor's local Interface ID.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.216.12.1.13
rlOspfv3VirtNbrRestartHelperStatus Indicates whether the router is acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.4.1.89.216.12.1.14
rlOspfv3VirtNbrRestartHelperAge Remaining time in the current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.	secondsOSPFV3-MIBOspfv3UpToRefreshIntervalTC Type Constraints: range: 1..1800	.1.3.6.1.4.1.89.216.12.1.15
rlOspfv3VirtNbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. none: no restart has yet been attempted. inProgress: a restart attempt is currently under…	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.89.216.12.1.16
rlOspfv3VirtNbrDeadTime The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the adjacency down. If fast hellos area in use, this value is always set to 1. If the oper_status is down or o…	OSPF-MIBPositiveInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.89.216.12.1.17

The Area Aggregate Table acts as an adjunct
to the Area Table.  It describes those address
aggregates that are configured to be propagated
from an area.  Its purpose is to reduce the amount
of information that is known beyond an area's
borders.
          
A range of IPv6 prefixes specified by a
prefix / prefix length pair.  Note that if
ranges are configured such that one range
subsumes another range, the most specific
match is the preferred one.

rlOspfv3AreaAggregateEntry row .1.3.6.1.4.1.89.216.13.1

A single area aggregate entry.

Information in this table is persistent, and
when this object is written, the entity SHOULD
save the change to non-volatile storage.

Indexes

rlOspfv3AreaAggregateProcessId rlOspfv3AreaAggregateAreaID rlOspfv3AreaAggregateAreaLsdbType rlOspfv3AreaAggregatePrefixType rlOspfv3AreaAggregatePrefix rlOspfv3AreaAggregatePrefixLength

Column	Syntax	OID
rlOspfv3AreaAggregateProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.13.1.1
rlOspfv3AreaAggregateAreaID The area the Address Aggregate is to be found within.	OSPF-MIBAreaID	.1.3.6.1.4.1.89.216.13.1.2
rlOspfv3AreaAggregateAreaLsdbType The type of the Address Aggregate. This field specifies the Area LSDB type that this Address Aggregate applies to.	Enumeration Enumerated Values: 8195 interAreaPrefixLsa 8199 nssaExternalLsa	.1.3.6.1.4.1.89.216.13.1.3
rlOspfv3AreaAggregatePrefixType The prefix type of rlOspfv3AreaAggregatePrefix. Only IPv6 addresses are expected.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.216.13.1.4
rlOspfv3AreaAggregatePrefix The IPv6 prefix.	INET-ADDRESS-MIBInetAddress Constraints: range: 0-16	.1.3.6.1.4.1.89.216.13.1.5
rlOspfv3AreaAggregatePrefixLength The length of the prefix (in bits). A prefix can not be shorter than 3 bits.	bitsINET-ADDRESS-MIBInetAddressPrefixLength Constraints: range: 3-128	.1.3.6.1.4.1.89.216.13.1.6
rlOspfv3AreaAggregateRowStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.216.13.1.7
rlOspfv3AreaAggregateEffect Prefixes subsumed by ranges will either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the prefix not being advertised at all outside the area.	Enumerationr/w Enumerated Values: 1 advertiseMatching 2 doNotAdvertiseMatching	.1.3.6.1.4.1.89.216.13.1.8
rlOspfv3AreaAggregateRouteTag This tag is advertised only in the summarized As-External LSA when summarizing from NSSA-LSAs to AS-External-LSAs.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.216.13.1.9

The OSPFv3 Process's Link-scope LSDB for virtual
interfaces.  The LSDB contains the Link-scope link
state advertisements from virtual interfaces.

rlOspfv3VirtLinkLsdbEntry row .1.3.6.1.4.1.89.216.14.1

A single Link-scope link state advertisement
for a virtual interface.

Indexes

rlOspfv3VirtLinkLsdbProcessId rlOspfv3VirtLinkLsdbIfAreaId rlOspfv3VirtLinkLsdbIfNeighbor rlOspfv3VirtLinkLsdbType rlOspfv3VirtLinkLsdbRouterId rlOspfv3VirtLinkLsdbLsid

Column	Syntax	OID
rlOspfv3VirtLinkLsdbProcessId A 32-bit integer uniquely identifying an OSPF process.	RADLAN-OSPF-MIBRlOspfProcessID Description: An OSPF Process Identifier.	.1.3.6.1.4.1.89.216.14.1.1
rlOspfv3VirtLinkLsdbIfAreaId The transit area that the virtual link traverses. By definition, this is not Area 0.	OSPF-MIBAreaID	.1.3.6.1.4.1.89.216.14.1.2
rlOspfv3VirtLinkLsdbIfNeighbor The Router ID of the virtual neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.89.216.14.1.3
rlOspfv3VirtLinkLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. Link-scope LSAs unrecognized by the router are also stored in this database.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.89.216.14.1.4
rlOspfv3VirtLinkLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.89.216.14.1.5
rlOspfv3VirtLinkLsdbLsid The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressin…	RlLsID Description: A unique 32-bit identifier of the piece of the routing domain that is being described by a link state advertisement. In contrast to OSPFv2, the Link State ID (LSID) has no addressing semantics.	.1.3.6.1.4.1.89.216.14.1.6
rlOspfv3VirtLinkLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more rece…	OSPFV3-MIBOspfv3LsaSequenceTC	.1.3.6.1.4.1.89.216.14.1.7
rlOspfv3VirtLinkLsdbAge This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.	secondsOSPFV3-MIBOspfv3LsaAgeTC Type Constraints: range: 0..3600 range: 32768..36368	.1.3.6.1.4.1.89.216.14.1.8
rlOspfv3VirtLinkLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.216.14.1.9
rlOspfv3VirtLinkLsdbAdvertisement The entire link state advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.89.216.14.1.10
rlOspfv3VirtLinkLsdbTypeKnown The value true (1) indicates that the LSA type is recognized by this router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.216.14.1.11