RADIUS-DYNAUTH-SERVER-MIB

        The MIB module for entities implementing the server
side of the Dynamic Authorization Extensions to the
Remote Authentication Dial-In User Service (RADIUS)
protocol.  Copyright (C) The Internet Society (2006).
        
Initial version as published in RFC 4673; for full
legal notices see the RFC itself.
    
Source file
RADIUS-DYNAUTH-SERVER-MIB
Last revised
Identity
radiusDynAuthServerMIB
Base OID
1.3.6.1.2.1.146
Imported Objects
INET-ADDRESS-MIB InetAddress InetAddressType
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RADIUS-DYNAUTH-SERVER-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RADIUS-DYNAUTH-SERVER-MIB::radiusDynAuthServerMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADIUS-DYNAUTH-SERVER-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADIUS-DYNAUTH-SERVER-MIB::radiusDynAuthServerMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (38)
.1.3.6.1.2.1.146
.1.3.6.1.2.1.146.1
.1.3.6.1.2.1.146.1.1
.1.3.6.1.2.1.146.1.1.1
.1.3.6.1.2.1.146.1.1.2
.1.3.6.1.2.1.146.1.1.3
.1.3.6.1.2.1.146.1.2
.1.3.6.1.2.1.146.1.2.1
Integer32
.1.3.6.1.2.1.146.1.2.1.1
.1.3.6.1.2.1.146.1.2.1.10
.1.3.6.1.2.1.146.1.2.1.11
.1.3.6.1.2.1.146.1.2.1.12
.1.3.6.1.2.1.146.1.2.1.13
.1.3.6.1.2.1.146.1.2.1.14
.1.3.6.1.2.1.146.1.2.1.15
.1.3.6.1.2.1.146.1.2.1.16
.1.3.6.1.2.1.146.1.2.1.17
.1.3.6.1.2.1.146.1.2.1.18
.1.3.6.1.2.1.146.1.2.1.19
.1.3.6.1.2.1.146.1.2.1.2
.1.3.6.1.2.1.146.1.2.1.20
.1.3.6.1.2.1.146.1.2.1.21
.1.3.6.1.2.1.146.1.2.1.22
.1.3.6.1.2.1.146.1.2.1.23
.1.3.6.1.2.1.146.1.2.1.24
.1.3.6.1.2.1.146.1.2.1.25
.1.3.6.1.2.1.146.1.2.1.26
hundredths of a secondSNMPv2-SMITimeTicks
.1.3.6.1.2.1.146.1.2.1.27
.1.3.6.1.2.1.146.1.2.1.3
.1.3.6.1.2.1.146.1.2.1.4
.1.3.6.1.2.1.146.1.2.1.5
.1.3.6.1.2.1.146.1.2.1.6
.1.3.6.1.2.1.146.1.2.1.7
.1.3.6.1.2.1.146.1.2.1.8
.1.3.6.1.2.1.146.1.2.1.9
.1.3.6.1.2.1.146.2
.1.3.6.1.2.1.146.2.1
.1.3.6.1.2.1.146.2.2
Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (3)
Compliance Statements (1)

OID .1.3.6.1.2.1.146.2.1.1
The compliance statement for entities implementing
the RADIUS Dynamic Authorization Server. Implementation
of this module is for entities that support IPv4 and/or
IPv6.
Required groups
mandatory radiusDynAuthServerMIBGroup
optional radiusDynAuthServerAuthOnlyGroup Only required for Dynamic Authorization Clients that
are supporting Service-Type attributes with value
'Authorize-Only'.
optional radiusDynAuthServerNoSessGroup This group is not required if the Dynamic
Authorization Server cannot easily determine whether
a session exists (e.g., in case of a RADIUS
proxy).
Object refinements
ObjectAccessSyntaxDescription
radiusDynAuthClientAddressType
ipv4(1), ipv6(2)
An implementation is only required to support IPv4 and
globally unique IPv6 addresses.
radiusDynAuthClientAddress An implementation is only required to support IPv4 and
globally unique IPv6 addresses.