RADIUS-DYNAUTH-CLIENT-MIB
The MIB module for entities implementing the client
side of the Dynamic Authorization Extensions to the
Remote Authentication Dial-In User Service (RADIUS)
protocol. Copyright (C) The Internet Society (2006).
Initial version as published in RFC 4672;
for full legal notices see the RFC itself.
- Source file
RADIUS-DYNAUTH-CLIENT-MIB- Last revised
- Identity
radiusDynAuthClientMIB- Base OID
1.3.6.1.2.1.145
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RADIUS-DYNAUTH-CLIENT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RADIUS-DYNAUTH-CLIENT-MIB::radiusDynAuthClientMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADIUS-DYNAUTH-CLIENT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADIUS-DYNAUTH-CLIENT-MIB::radiusDynAuthClientMIB'
Objects (42)
Showing 42 of 42 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.145 |
||
.1.3.6.1.2.1.145.1 |
||
.1.3.6.1.2.1.145.1.1 |
||
.1.3.6.1.2.1.145.1.1.1 |
||
.1.3.6.1.2.1.145.1.1.2 |
||
.1.3.6.1.2.1.145.1.2 |
||
.1.3.6.1.2.1.145.1.2.1 |
||
|
Integer32
|
.1.3.6.1.2.1.145.1.2.1.1 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.10 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.11 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.12 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.13 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.14 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.15 |
|
|
requestsSNMPv2-SMIGauge32
|
.1.3.6.1.2.1.145.1.2.1.16 |
|
|
timeoutsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.17 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.18 |
|
|
requestsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.19 |
|
.1.3.6.1.2.1.145.1.2.1.2 |
||
|
requestsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.20 |
|
|
retransmissionsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.21 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.22 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.23 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.24 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.25 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.26 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.27 |
|
|
requestsSNMPv2-SMIGauge32
|
.1.3.6.1.2.1.145.1.2.1.28 |
|
|
timeoutsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.29 |
|
.1.3.6.1.2.1.145.1.2.1.3 |
||
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.30 |
|
|
repliesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.31 |
|
|
hundredths of a secondSNMPv2-SMITimeTicks
|
.1.3.6.1.2.1.145.1.2.1.32 |
|
|
Unsigned32
|
.1.3.6.1.2.1.145.1.2.1.4 |
|
.1.3.6.1.2.1.145.1.2.1.5 |
||
|
hundredths of a secondSNMPv2-SMITimeTicks
|
.1.3.6.1.2.1.145.1.2.1.6 |
|
|
requestsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.7 |
|
|
requestsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.8 |
|
|
retransmissionsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.145.1.2.1.9 |
|
.1.3.6.1.2.1.145.2 |
||
.1.3.6.1.2.1.145.2.1 |
||
.1.3.6.1.2.1.145.2.2 |
Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- INET-ADDRESS-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- RADIUS-DYNAUTH-CLIENT-MIBrfcselected
Conformance Groups (3)
Compliance Statements (1)
OID
.1.3.6.1.2.1.145.2.1.1The compliance statement for entities implementing
the RADIUS Dynamic Authorization Client.
Implementation of this module is for entities that
support IPv4 and/or IPv6.
the RADIUS Dynamic Authorization Client.
Implementation of this module is for entities that
support IPv4 and/or IPv6.
Required groups
| mandatory | radiusDynAuthClientMIBGroup | |
| optional | radiusDynAuthClientAuthOnlyGroup |
Only required for Dynamic Authorization Clients that are supporting Service-Type attributes with value 'Authorize-Only'. |
| optional | radiusDynAuthClientNoSessGroup |
This group is not required if the Dynamic Authorization Server cannot easily determine whether a session exists (e.g., in case of a RADIUS proxy). |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| radiusDynAuthServerAddressType |
ipv4(1), ipv6(2)
|
An implementation is only required to support IPv4 and globally unique IPv6 addresses. |
|
| radiusDynAuthServerAddress | An implementation is only required to support IPv4 and globally unique IPv6 addresses. |