RADIUS-AUTH-SERVER-MIB
The MIB module for entities implementing the server
side of the Remote Authentication Dial-In User
Service (RADIUS) authentication protocol. Copyright
(C) The Internet Society (2006). This version of this
MIB module is part of RFC 4669; see the RFC itself for
full legal notices.
- Source file
RADIUS-AUTH-SERVER-MIB- Last revised
- Identity
radiusAuthServMIB- Base OID
1.3.6.1.2.1.67.1.1
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 IpAddress mib-2 MODULE-IDENTITY (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RADIUS-AUTH-SERVER-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RADIUS-AUTH-SERVER-MIB::radiusAuthServMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADIUS-AUTH-SERVER-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADIUS-AUTH-SERVER-MIB::radiusAuthServMIB'
Objects (52)
Showing 52 of 52 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.67 |
||
.1.3.6.1.2.1.67.1 |
||
.1.3.6.1.2.1.67.1.1 |
||
.1.3.6.1.2.1.67.1.1.1 |
||
.1.3.6.1.2.1.67.1.1.1.1 |
||
.1.3.6.1.2.1.67.1.1.1.1.1 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.10 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.11 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.12 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.13 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.14 |
|
|
|
.1.3.6.1.2.1.67.1.1.1.1.15 |
|
|
|
.1.3.6.1.2.1.67.1.1.1.1.15.1 |
|
|
|
Integer32
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.1 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.10 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.11 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.12 |
|
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.2 |
|
|
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.3 |
|
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.4 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.5 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.6 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.7 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.8 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.15.1.9 |
.1.3.6.1.2.1.67.1.1.1.1.16 |
||
.1.3.6.1.2.1.67.1.1.1.1.16.1 |
||
|
Integer32
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.1 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.10 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.11 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.12 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.13 |
|
|
centisecondsSNMPv2-SMITimeTicks
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.14 |
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.2 |
||
.1.3.6.1.2.1.67.1.1.1.1.16.1.3 |
||
.1.3.6.1.2.1.67.1.1.1.1.16.1.4 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.5 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.6 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.7 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.8 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.16.1.9 |
|
.1.3.6.1.2.1.67.1.1.1.1.2 |
||
.1.3.6.1.2.1.67.1.1.1.1.3 |
||
|
Enumeration
|
.1.3.6.1.2.1.67.1.1.1.1.4 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.5 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.6 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.7 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.8 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.1.1.1.9 |
|
.1.3.6.1.2.1.67.1.1.2 |
||
.1.3.6.1.2.1.67.1.1.2.1 |
||
.1.3.6.1.2.1.67.1.1.2.2 |
Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- INET-ADDRESS-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- RADIUS-AUTH-SERVER-MIBrfcselected
Conformance Groups (2)
Compliance Statements (2)
OID
.1.3.6.1.2.1.67.1.1.2.1.1The compliance statement for authentication
servers implementing the RADIUS Authentication
Server MIB. Implementation of this module is for
IPv4-only entities, or for backwards compatibility
use with entities that support both IPv4 and
IPv6.
servers implementing the RADIUS Authentication
Server MIB. Implementation of this module is for
IPv4-only entities, or for backwards compatibility
use with entities that support both IPv4 and
IPv6.
Required groups
| mandatory | radiusAuthServMIBGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| radiusAuthServConfigReset | The only SETable value is 'reset' (2). |
OID
.1.3.6.1.2.1.67.1.1.2.1.2The compliance statement for authentication
servers implementing the RADIUS Authentication
Server IPv6 Extensions MIB. Implementation of
this module is for entities that support IPv6,
or support IPv4 and IPv6.
servers implementing the RADIUS Authentication
Server IPv6 Extensions MIB. Implementation of
this module is for entities that support IPv6,
or support IPv4 and IPv6.
Required groups
| mandatory | radiusAuthServExtMIBGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| radiusAuthServConfigReset | The only SETable value is 'reset' (2). | ||
| radiusAuthClientInetAddressType |
ipv4(1), ipv6(2)
|
An implementation is only required to support IPv4 and globally unique IPv6 addresses. |
|
| radiusAuthClientInetAddress | An implementation is only required to support IPv4 and globally unique IPv6 addresses. |