RADIUS-AUTH-CLIENT-MIB
Recognized by Observium The MIB module for entities implementing the client
side of the Remote Authentication Dial-In User Service
(RADIUS) authentication protocol. Copyright (C) The
Internet Society (2006). This version of this MIB
module is part of RFC 4668; see the RFC itself for
full legal notices.
Observium recognizes this MIB
Observium uses this MIB to identify device capabilities or determine applicability.
Explore Observium network monitoring
- Source file
RADIUS-AUTH-CLIENT-MIB- Last revised
- Identity
radiusAuthClientMIB- Base OID
1.3.6.1.2.1.67.1.2
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RADIUS-AUTH-CLIENT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RADIUS-AUTH-CLIENT-MIB::radiusAuthClientMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADIUS-AUTH-CLIENT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADIUS-AUTH-CLIENT-MIB::radiusAuthClientMIB'
Objects (46)
Showing 46 of 46 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.67 |
||
.1.3.6.1.2.1.67.1 |
||
.1.3.6.1.2.1.67.1.2 |
||
.1.3.6.1.2.1.67.1.2.1 |
||
.1.3.6.1.2.1.67.1.2.1.1 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.1 |
|
.1.3.6.1.2.1.67.1.2.1.1.2 |
||
|
|
.1.3.6.1.2.1.67.1.2.1.1.3 |
|
|
|
.1.3.6.1.2.1.67.1.2.1.1.3.1 |
|
|
|
Integer32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.1 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.10 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.11 |
|
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.12 |
|
|
|
timeoutsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.13 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.14 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.15 |
|
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.2 |
|
|
|
Integer32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.3 |
|
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.4 |
|
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.5 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.6 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.7 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.8 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.3.1.9 |
.1.3.6.1.2.1.67.1.2.1.1.4 |
||
.1.3.6.1.2.1.67.1.2.1.1.4.1 |
||
|
Integer32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.1 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.10 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.11 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.12 |
|
|
packetsSNMPv2-SMIGauge32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.13 |
|
|
timeoutsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.14 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.15 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.16 |
|
|
centisecondsSNMPv2-SMITimeTicks
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.17 |
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.2 |
||
.1.3.6.1.2.1.67.1.2.1.1.4.1.3 |
||
|
Unsigned32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.4 |
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.5 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.6 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.7 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.8 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.67.1.2.1.1.4.1.9 |
|
.1.3.6.1.2.1.67.1.2.2 |
||
.1.3.6.1.2.1.67.1.2.2.1 |
||
.1.3.6.1.2.1.67.1.2.2.2 |
Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- INET-ADDRESS-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- RADIUS-AUTH-CLIENT-MIBrfcselected
Conformance Groups (2)
Compliance Statements (2)
OID
.1.3.6.1.2.1.67.1.2.2.1.1The compliance statement for authentication clients
implementing the RADIUS Authentication Client MIB.
Implementation of this module is for IPv4-only
entities, or for backwards compatibility use with
entities that support both IPv4 and IPv6.
implementing the RADIUS Authentication Client MIB.
Implementation of this module is for IPv4-only
entities, or for backwards compatibility use with
entities that support both IPv4 and IPv6.
Required groups
| mandatory | radiusAuthClientMIBGroup |
OID
.1.3.6.1.2.1.67.1.2.2.1.2The compliance statement for authentication
clients implementing the RADIUS Authentication
Client IPv6 Extensions MIB. Implementation of
this module is for entities that support IPv6,
or support IPv4 and IPv6.
clients implementing the RADIUS Authentication
Client IPv6 Extensions MIB. Implementation of
this module is for entities that support IPv6,
or support IPv4 and IPv6.
Required groups
| mandatory | radiusAuthClientExtMIBGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| radiusAuthServerInetAddressType |
ipv4(1), ipv6(2)
|
An implementation is only required to support IPv4 and globally unique IPv6 addresses. |
|
| radiusAuthServerInetAddress | An implementation is only required to support IPv4 and globally unique IPv6 addresses. |