RADIUS-ACC-CLIENT-MIB

Recognized by Observium
        The MIB module for entities implementing the client
side of the Remote Authentication Dial-In User Service
(RADIUS) accounting protocol.  Copyright (C) The
Internet Society (2006).  This version of this MIB
module is part of RFC 4670; see the RFC itself for
full legal notices.
    
Observium recognizes this MIB
Observium uses this MIB to identify device capabilities or determine applicability.
Explore Observium network monitoring
Last revised
Identity
radiusAccClientMIB
Base OID
1.3.6.1.2.1.67.2.2
Imported Objects
INET-ADDRESS-MIB InetAddress InetAddressType InetPortNumber
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RADIUS-ACC-CLIENT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RADIUS-ACC-CLIENT-MIB::radiusAccClientMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADIUS-ACC-CLIENT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADIUS-ACC-CLIENT-MIB::radiusAccClientMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (42)
.1.3.6.1.2.1.67
.1.3.6.1.2.1.67.2
.1.3.6.1.2.1.67.2.2
.1.3.6.1.2.1.67.2.2.1
.1.3.6.1.2.1.67.2.2.1.1
.1.3.6.1.2.1.67.2.2.1.1.1
.1.3.6.1.2.1.67.2.2.1.1.2
.1.3.6.1.2.1.67.2.2.1.1.3
.1.3.6.1.2.1.67.2.2.1.1.3.1
Integer32
.1.3.6.1.2.1.67.2.2.1.1.3.1.1
.1.3.6.1.2.1.67.2.2.1.1.3.1.10
.1.3.6.1.2.1.67.2.2.1.1.3.1.11
.1.3.6.1.2.1.67.2.2.1.1.3.1.12
.1.3.6.1.2.1.67.2.2.1.1.3.1.13
.1.3.6.1.2.1.67.2.2.1.1.3.1.2
Integer32
.1.3.6.1.2.1.67.2.2.1.1.3.1.3
.1.3.6.1.2.1.67.2.2.1.1.3.1.4
.1.3.6.1.2.1.67.2.2.1.1.3.1.5
.1.3.6.1.2.1.67.2.2.1.1.3.1.6
.1.3.6.1.2.1.67.2.2.1.1.3.1.7
.1.3.6.1.2.1.67.2.2.1.1.3.1.8
.1.3.6.1.2.1.67.2.2.1.1.3.1.9
.1.3.6.1.2.1.67.2.2.1.1.4
.1.3.6.1.2.1.67.2.2.1.1.4.1
Integer32
.1.3.6.1.2.1.67.2.2.1.1.4.1.1
.1.3.6.1.2.1.67.2.2.1.1.4.1.10
.1.3.6.1.2.1.67.2.2.1.1.4.1.11
.1.3.6.1.2.1.67.2.2.1.1.4.1.12
.1.3.6.1.2.1.67.2.2.1.1.4.1.13
.1.3.6.1.2.1.67.2.2.1.1.4.1.14
.1.3.6.1.2.1.67.2.2.1.1.4.1.15
.1.3.6.1.2.1.67.2.2.1.1.4.1.2
.1.3.6.1.2.1.67.2.2.1.1.4.1.3
Unsigned32
.1.3.6.1.2.1.67.2.2.1.1.4.1.4
.1.3.6.1.2.1.67.2.2.1.1.4.1.5
.1.3.6.1.2.1.67.2.2.1.1.4.1.6
.1.3.6.1.2.1.67.2.2.1.1.4.1.7
.1.3.6.1.2.1.67.2.2.1.1.4.1.8
.1.3.6.1.2.1.67.2.2.1.1.4.1.9
.1.3.6.1.2.1.67.2.2.2
.1.3.6.1.2.1.67.2.2.2.1
.1.3.6.1.2.1.67.2.2.2.2
Compliance Statements (2)

OID .1.3.6.1.2.1.67.2.2.2.1.1
The compliance statement for accounting clients
implementing the RADIUS Accounting Client MIB.
Implementation of this module is for IPv4-only
entities, or for backwards compatibility use with
entities that support both IPv4 and IPv6.
Required groups

OID .1.3.6.1.2.1.67.2.2.2.1.2
The compliance statement for accounting
clients implementing the RADIUS Accounting
Client IPv6 Extensions MIB. Implementation of
this module is for entities that support IPv6,
or support IPv4 and IPv6.
Required groups
Object refinements
ObjectAccessSyntaxDescription
radiusAccServerInetAddressType
ipv4(1), ipv6(2)
An implementation is only required to support
IPv4 and globally unique IPv6 addresses.
radiusAccServerInetAddress An implementation is only required to support
IPv4 and globally unique IPv6 addresses.