RAD-DS3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
52

prtSDs3IfTable

table
.1.3.6.1.4.1.164.3.1.6.3.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk prtSDs3IfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-DS3-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-DS3-MIB::prtSDs3IfTable' 
The DS3 interface table.
prtDs3IfEntry row .1.3.6.1.4.1.164.3.1.6.3.1.1.1
An entry in the DS3 interface table.
Indexes
Column Syntax OID
prtDs3IfTimeElapsed
The number of seconds that have elapsed since
the beginning of the near end current error-
measurement period.
Integer32
Constraints:
range: 0-899
 .1.3.6.1.4.1.164.3.1.6.3.1.1.1.1
prtDs3IfValidIntervals
The number of previous near end intervals for
which valid data was collected. The value will be
96 unless the interface was brought online within
the last 24 hours, in which case the value will be
the number of complet…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.164.3.1.6.3.1.1.1.2

prtDs3CurrentTable

table
.1.3.6.1.4.1.164.3.1.6.3.1.2 · 1 row entry · 19 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk prtDs3CurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-DS3-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-DS3-MIB::prtDs3CurrentTable' 
The DS3 Current table.
prtDs3CurrentEntry row .1.3.6.1.4.1.164.3.1.6.3.1.2.1
An entry in the DS3 Current table.
Indexes
Column Syntax OID
prtDs3CurrentLOS
The counter associated with the number of LOS
seconds, encountered by a DS3 interface in
the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.1
prtDs3CurrentOOF
The counter associated with the number of OOF
seconds, encountered by a DS3
interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.2
prtDs3CurrentLOC
The counter associated with the number of LOC
seconds, encountered by a DS3
interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.3
prtDs3CurrentAIS
The counter associated with the number of AIS
seconds, encountered by a DS3
interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.4
prtDs3CurrentRDI
The counter associated with the number of RDI
seconds, encountered by a DS3
interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.5
prtDs3CurrentUAS
The counter associated with the number of UAS,
encountered by a SONET interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.6
prtDs3CurrentBIP
The counter associated with the number of
BIP errors, encountered by a DS3
interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.7
prtDs3CurrentFEBE
The counter associated with the number of
FEBE errors, encountered by a DS3
interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.8
prtDs3CurrentSLM
The counter associated with the number of SLM
seconds, encountered by an E3 (only )
interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.9
prtDs3CurrentSES
The counter associated with the number of SES
encountered by a E3
interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.10
prtDs3CurrentES
The number of Errored Seconds, encountered by a
DS3 interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.11
prtDs3CurrentBitParity
Bit Parity Error counter. Relevant to T3 only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.12
prtDs3CurrentPlcpLOF
The counter associated with the number of LOF
seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals. This counter is relevant for plcpInternal(5)
or plcpExternal(6) configur…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.13
prtDs3CurrentPlcpRAI
Receiving Yellow/Remote Alarm Indication. This counter is
relevant for PLCP (external/internal) frame types only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.14
prtDs3CurrentPlcpBIP
The counter associated with the number of BIP errors,
encountered by a DS3 interface in the current 15 minute
interval. This counter is relevant for PLCP (external/internal)
frame types only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.15
prtDs3CurrentPlcpFEBE
The counter associated with the number of FEBE
errors, encountered by a DS3 interface in the current
15 minute interval. This counter is relevant for PLCP
(external/internal) frame types only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.16
prtDs3CurrentBPV
Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the current 15 minute interval.
This object is relevant only for Electrical Line
of Fomi-E3/T3.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.17
prtDs3CurrentLCE
Number of LCE (Link Code Errors) encountered
by a DS3 interface in the current 15 minute interval.
This object is relevant only for Optical Links
of Fomi-E3/T3.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.18
prtDs3CurrentStatus
The statuses of the current interval:
0 - Valid.
1 - redundantLinkSwitch - the link has been switched
by a redundancy mechanism.
2 - discontinuity - module was partialy out.
4 - notValid - module is out.
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.164.3.1.6.3.1.2.1.19

prtDs3IntervalTable

table
.1.3.6.1.4.1.164.3.1.6.3.1.3 · 1 row entry · 20 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk prtDs3IntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-DS3-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-DS3-MIB::prtDs3IntervalTable' 
The DS3 Interval table.
prtDs3IntervalEntry row .1.3.6.1.4.1.164.3.1.6.3.1.3.1
An entry in the DS3 Interval table.
Indexes
Column Syntax OID
prtDs3IntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid).
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.1
prtDs3IntervalLOS
The counter associated with the number of LOS
seconds , encountered by a DS3 interface in
one of the previous 96, individual 15 minute,
intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.2
prtDs3IntervalOOF
The counter associated with the number of OOF
seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.3
prtDs3IntervalLOC
The counter associated with the number of LOC
seconds, encountered by a DS3
interface in one of the previous 96,
individual 15 minute, intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.4
prtDs3IntervalAIS
The counter associated with the number of AIS
seconds, encountered by a SONET
interface in one of the previous 96, individual 15
minute, intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.5
prtDs3IntervalRDI
The counter associated with the number of RDI
seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.6
prtDs3IntervalUAS
The counter associated with the number of UAS,
encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.7
prtDs3IntervalBIP
The counter associated with the number of
BIP errors, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.8
prtDs3IntervalFEBE
The counter associated with the number of
FEBE errors, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.9
prtDs3IntervalSLM
The counter associated with the number of SLM
seconds, encountered by an E3
interface in one of the previous 96, individual 15
minute, intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.10
prtDs3IntervalSES
The counter associated with the number of SES
encountered by a E3
interface in one of the previous 96, individual 15
minute, intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.11
prtDs3IntervalES
The number of Errored Seconds, encountered by a
DS3 interface in one of the previous 96, individual 15
minute, intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.12
prtDs3IntervalBitParity
Bit Parity Error counter. Relevant to T3 only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.13
prtDs3IntervalPlcpLOF
The counter associated with the number of LOF
seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals. This counter is relevant for plcpInternal(5)
or plcpExternal(6) configur…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.14
prtDs3IntervalPlcpRAI
Receiving Yellow/Remote Alarm Indication. This counter is
relevant for PLCP (external/internal) frame types only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.15
prtDs3IntervalPlcpBIP
The counter associated with the number of BIP errors,
encountered by a DS3 interface in the current 15 minute
interval. This counter is relevant for PLCP (external/internal)
frame types only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.16
prtDs3IntervalPlcpFEBE
The counter associated with the number of FEBE
errors, encountered by a DS3 interface in the current
15 minute interval. This counter is relevant for PLCP
(external/internal) frame types only.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.17
prtDs3IntervalBPV
Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the specified 15 minute interval.
This object is relevant only for Electrical Line
of Fomi-E3/T3.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.18
prtDs3IntervalLCE
Number of LCE (Link Code Errors) encountered
by a DS3 interface in the specified 15 minute interval.
This object is relevant only for Optical Links
of Fomi-E3/T3.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.19
prtDs3IntervalStatus
The statuses of the current interval:
0 - Valid.
1 - redundantLinkSwitch - the link has been switched
by a redundancy mechanism.
2 - discontinuity - module was partialy out.
4 - notValid - module is out.
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.164.3.1.6.3.1.3.1.20

prtDs3TotalTable

table
.1.3.6.1.4.1.164.3.1.6.3.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk prtDs3TotalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-DS3-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-DS3-MIB::prtDs3TotalTable' 
A list of Total entries.
prtDs3TotalEntry row .1.3.6.1.4.1.164.3.1.6.3.1.4.1
An entry of Total table.
Indexes
Column Syntax OID
prtDs3TotalUAS
Number of UASs (Unavailable Seconds) , encountered by a
DS3 interface in the previous 96 intervals.
Invalid 15 minute intervals count as 0.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.4.1.6
prtDs3TotalBPV
Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the previous 96 intervals.
Invalid 15 minute intervals count as 0.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.4.1.17
prtDs3TotalLCE
Number of LCE (Link Code Errors) encountered
by a DS3 interface in the previous 96 intervals.
Invalid 15 minute intervals count as 0.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.4.1.18
prtDs3TotalSES
Number of SES (Severely Errored Seconds) encountered
by a DS3 interface in the previous 96 intervals.
Invalid 15 minute intervals count as 0.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.1.4.1.19

dsx3XConfigTable

table
.1.3.6.1.4.1.164.3.1.6.3.2 · 1 row entry · 4 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk dsx3XConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-DS3-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-DS3-MIB::dsx3XConfigTable' 
An extension to the DS3 Configuration table.
dsx3XConfigEntry row .1.3.6.1.4.1.164.3.1.6.3.2.1
An entry containing additional configuration
parameters.
Indexes
No indexes recorded
Column Syntax OID
dsx3AisEnable
Enable/ disable AIS transmit when Ethernet (for TDMoIP) line is disconnected.
Enumerationr/w
Enumerated Values:
1notApplicable
2disable
3enable
 .1.3.6.1.4.1.164.3.1.6.3.2.1.1
dsx3TxClockSource
The source of Transmit Clock.

loopTiming indicates that the recovered receive
clock is used as the transmit clock.

localTiming indicates that a local clock source is
used or that an externa…
Enumerationr/w
Enumerated Values:
1loopTiming
2localTiming
3throughTiming
4system
5adaptive
 .1.3.6.1.4.1.164.3.1.6.3.2.1.2
dsx3TxPortQuality
This object indicates the DS3 port clock quality.
Enumerationr/w
Enumerated Values:
1notApplicable
2stratum1
3stratum2
4stratum3
5stratum3e
6stratum4
 .1.3.6.1.4.1.164.3.1.6.3.2.1.3
dsx3TxClockInstance
When dsx3TxClockSource is set to throughTiming(3) or
adaptive(4), this parameter specifies the instanse of
the clock domain or recovered clock, respectively, that
shall be used for transmission
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.2.1.4

dsx3MappingTable

table
.1.3.6.1.4.1.164.3.1.6.3.3 · 1 row entry · 3 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk dsx3MappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-DS3-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-DS3-MIB::dsx3MappingTable' 
The DS3/E3 mapping table associates DS3/E3 channels
with logical or physical interfaces.
          
For example, consider a DS3 device with 16 T1's and 1 VCG.
		There are 28 logical/internal channels, numbered 1 through 28
		but only 17 are actually connected.
          
		We might describe the allocation of channels, in the dsx3MappingTable, as
follows:
dsx3MappingIfIndex.1. 1 = 1001  dsx3MappingIfIndex.1.15 = 1015
dsx3MappingIfIndex.1. 2 = 1002  dsx3MappingIfIndex.1.16 = 1016
dsx3MappingIfIndex.1. 3 = 1003  dsx3MappingIfIndex.1.17 = 1017
dsx3MappingIfIndex.1. 4 = 1004  dsx3MappingIfIndex.1.18 =  0
dsx3MappingIfIndex.1. 5 = 1005  dsx3MappingIfIndex.1.19 =  0
dsx3MappingIfIndex.1. 6 = 1006  dsx3MappingIfIndex.1.20 =  0
dsx3MappingIfIndex.1. 7 = 1007  dsx3MappingIfIndex.1.21 =  0
dsx3MappingIfIndex.1. 8 = 1008  dsx3MappingIfIndex.1.22 =  0
dsx3MappingIfIndex.1. 9 = 1009  dsx3MappingIfIndex.1.23 =  0
dsx3MappingIfIndex.1.10 = 1010  dsx3MappingIfIndex.1.24 =  0
dsx3MappingIfIndex.1.11 = 1011  dsx3MappingIfIndex.1.25 =  0
dsx3MappingIfIndex.1.12 = 1012  dsx3MappingIfIndex.1.26 =  0
dsx3MappingIfIndex.1.13 = 1013  dsx3MappingIfIndex.1.27 =  0
dsx3MappingIfIndex.1.14 = 1014  dsx3MappingIfIndex.1.28 =  0
          
		Note that in the case above all channels are mapped to one T3 port with ifIndex = 1.
		The Channels 1...28 are represented via the 2nd index.
		The values of 1001...1016 are the T1 interface ifIndexes.
		The value of 1017 is the ifIndex of the VCG.
	    Unconnected channels have a value of 0.
dsx3MappingEntry row .1.3.6.1.4.1.164.3.1.6.3.3.1
An entry in the DS3 mapping table.
Indexes
Column Syntax OID
dsx3MappingDs3Index
The index value which uniquely identifies the
DS3/E3 interface to which this entry is applicable.
This value is also equal to dsx3LineIndex used in dsx3ConfigEntry.

For RICi-16 this is the …
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.164.3.1.6.3.3.1.1
dsx3MappingNumber
The channel number for this entry.

For RICi-16 this is the channel number 1...28.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.3.3.1.2
dsx3MappingIfIndex
An index value that uniquely identifies a logical or physical
interface mapped to a DS3/E3 channel.
If no interface is currently using a channel, the value should be zero.
If a single interface occupies more than one c…
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.164.3.1.6.3.3.1.3