QTECH-WLAN-FAT-AP-CF-MIB Table View

The table discribe wired interface configuration.

apWiredInterfaceCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.2.2.1

The entry of apWiredInterfaceCfgTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
apIfDescr The description of the ap interfaces.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.2.2.1.1
apIfType The style of the ap interfaces.	IANAifType-MIBIANAifType Type Values: 1 other 2 regular1822 3 hdh1822 4 ddnX25 5 rfc877x25 6 ethernetCsmacd 7 iso88023Csmacd 8 iso88024TokenBus 9 iso88025TokenRing 10 iso88026Man 11 starLan 12 proteon10Mbit 13 proteon80Mbit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 ds1 19 e1 20 basicISDN 21 primaryISDN 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor 55 ieee80212 56 fibreChannel 57 hippiInterface 58 frameRelayInterconnect 59 aflane8023 60 aflane8025 61 cctEmul 62 fastEther 63 isdn 64 v11 65 v36 66 g703at64k 67 g703at2mb 68 qllc 69 fastEtherFX 70 channel 71 ieee80211 72 ibm370parChan 73 escon 74 dlsw 75 isdns 76 isdnu 77 lapd 78 ipSwitch 79 rsrb 80 atmLogical 81 ds0 82 ds0Bundle 83 bsc 84 async 85 cnr 86 iso88025Dtr 87 eplrs 88 arap 89 propCnls 90 hostPad 91 termPad 92 frameRelayMPI 93 x213 94 adsl 95 radsl 96 sdsl 97 vdsl 98 iso88025CRFPInt 99 myrinet 100 voiceEM 101 voiceFXO 102 voiceFXS 103 voiceEncap 104 voiceOverIp 105 atmDxi 106 atmFuni 107 atmIma 108 pppMultilinkBundle 109 ipOverCdlc 110 ipOverClaw 111 stackToStack 112 virtualIpAddress 113 mpc 114 ipOverAtm 115 iso88025Fiber 116 tdlc 117 gigabitEthernet 118 hdlc 119 lapf 120 v37 121 x25mlp 122 x25huntGroup 123 transpHdlc 124 interleave 125 fast 126 ip 127 docsCableMaclayer 128 docsCableDownstream 129 docsCableUpstream 130 a12MppSwitch 131 tunnel 132 coffee 133 ces 134 atmSubInterface 135 l2vlan 136 l3ipvlan 137 l3ipxvlan 138 digitalPowerline 139 mediaMailOverIp 140 dtm 141 dcn 142 ipForward 143 msdsl 144 ieee1394 145 if-gsn 146 dvbRccMacLayer 147 dvbRccDownstream 148 dvbRccUpstream 149 atmVirtual 150 mplsTunnel 151 srp 152 voiceOverAtm 153 voiceOverFrameRelay 154 idsl 155 compositeLink 156 ss7SigLink 157 propWirelessP2P 158 frForward 159 rfc1483 160 usb 161 ieee8023adLag 162 bgppolicyaccounting 163 frf16MfrBundle 164 h323Gatekeeper 165 h323Proxy 166 mpls 167 mfSigLink 168 hdsl2 169 shdsl 170 ds1FDL 171 pos 172 dvbAsiIn 173 dvbAsiOut 174 plc 175 nfas 176 tr008 177 gr303RDT 178 gr303IDT 179 isup 180 propDocsWirelessMaclayer 181 propDocsWirelessDownstream 182 propDocsWirelessUpstream 183 hiperlan2 184 propBWAp2Mp 185 sonetOverheadChannel 186 digitalWrapperOverheadChannel 187 aal2 188 radioMAC 189 atmRadio 190 imt 191 mvl 192 reachDSL 193 frDlciEndPt 194 atmVciEndPt 195 opticalChannel 196 opticalTransport 197 propAtm 198 voiceOverCable 199 infiniband 200 teLink 201 q2931 202 virtualTg 203 sipTg 204 sipSig 205 docsCableUpstreamChannel 206 econet 207 pon155 208 pon622 209 bridge 210 linegroup 211 voiceEMFGD 212 voiceFGDEANA 213 voiceDID 214 mpegTransport 215 sixToFour 216 gtp 217 pdnEtherLoop1 218 pdnEtherLoop2 219 opticalChannelGroup 220 homepna 221 gfp 222 ciscoISLvlan 223 actelisMetaLOOP 224 fcipLink 225 rpr 226 qam 227 lmp 228 cblVectaStar 229 docsCableMCmtsDownstream 230 adsl2 231 macSecControlledIF 232 macSecUncontrolledIF 233 aviciOpticalEther 234 atmbond 235 voiceFGDOS 236 mocaVersion1 237 ieee80216WMAN 238 adsl2plus 239 dvbRcsMacLayer 240 dvbTdm 241 dvbRcsTdma 242 x86Laps 243 wwanPP 244 wwanPP2 245 voiceEBS 246 ifPwType 247 ilan 248 pip 249 aluELP 250 gpon 251 vdsl2 252 capwapDot11Profile 253 capwapDot11Bss 254 capwapWtpVirtualRadio 255 bits 256 docsCableUpstreamRfPort 257 cableDownstreamRfPort 258 vmwareVirtualNic 259 ieee802154 260 otnOdu 261 otnOtu 262 ifVfiType 263 g9981 264 g9982 265 g9983 266 aluEpon 267 aluEponOnu 268 aluEponPhysicalUni 269 aluEponLogicalLink 270 aluGponOnu 271 aluGponPhysicalUni 272 vmwareNicTeam 277 docsOfdmDownstream 278 docsOfdmaUpstream 279 gfast 280 sdci 281 xboxWireless 282 fastdsl 283 docsCableScte55d1FwdOob 284 docsCableScte55d1RetOob 285 docsCableScte55d2DsOob 286 docsCableScte55d2UsOob 287 docsCableNdf 288 docsCableNdr 289 ptm 290 ghn 291 otnOtsi 292 otnOtuc 293 otnOduc 294 otnOtsig 295 microwaveCarrierTermination 296 microwaveRadioLinkTerminal 297 ieee8021axDrni 298 ax25 299 ieee19061nanocom 300 cpri 301 omni 302 roe 303 p2pOverLan	.1.3.6.1.4.1.27514.1.1.10.2.80.8.2.2.1.2
apIfMTU The max mtu of the ap interfaces.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.2.2.1.3
apIfSpeed The speed of the ap interfaces.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.2.2.1.4
apIfPhysAddress The MAC address of the ap interfaces.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.2.2.1.5
apIfAdminStatus The status admin of the interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.2.2.1.6
apIfOperStatus The operation status of the interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.2.2.1.7
apIfLastChange The last time of current status.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.2.2.1.8

The table inluding radio interface information Of the AP.

apRadioInterfaceInfoEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1

The entry of apRadioInterfaceInfoTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
apRadioIfDescr The discription of radio interface information	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.1
apRadioIfType Radio interface type	IANAifType-MIBIANAifType Type Values: 1 other 2 regular1822 3 hdh1822 4 ddnX25 5 rfc877x25 6 ethernetCsmacd 7 iso88023Csmacd 8 iso88024TokenBus 9 iso88025TokenRing 10 iso88026Man 11 starLan 12 proteon10Mbit 13 proteon80Mbit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 ds1 19 e1 20 basicISDN 21 primaryISDN 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor 55 ieee80212 56 fibreChannel 57 hippiInterface 58 frameRelayInterconnect 59 aflane8023 60 aflane8025 61 cctEmul 62 fastEther 63 isdn 64 v11 65 v36 66 g703at64k 67 g703at2mb 68 qllc 69 fastEtherFX 70 channel 71 ieee80211 72 ibm370parChan 73 escon 74 dlsw 75 isdns 76 isdnu 77 lapd 78 ipSwitch 79 rsrb 80 atmLogical 81 ds0 82 ds0Bundle 83 bsc 84 async 85 cnr 86 iso88025Dtr 87 eplrs 88 arap 89 propCnls 90 hostPad 91 termPad 92 frameRelayMPI 93 x213 94 adsl 95 radsl 96 sdsl 97 vdsl 98 iso88025CRFPInt 99 myrinet 100 voiceEM 101 voiceFXO 102 voiceFXS 103 voiceEncap 104 voiceOverIp 105 atmDxi 106 atmFuni 107 atmIma 108 pppMultilinkBundle 109 ipOverCdlc 110 ipOverClaw 111 stackToStack 112 virtualIpAddress 113 mpc 114 ipOverAtm 115 iso88025Fiber 116 tdlc 117 gigabitEthernet 118 hdlc 119 lapf 120 v37 121 x25mlp 122 x25huntGroup 123 transpHdlc 124 interleave 125 fast 126 ip 127 docsCableMaclayer 128 docsCableDownstream 129 docsCableUpstream 130 a12MppSwitch 131 tunnel 132 coffee 133 ces 134 atmSubInterface 135 l2vlan 136 l3ipvlan 137 l3ipxvlan 138 digitalPowerline 139 mediaMailOverIp 140 dtm 141 dcn 142 ipForward 143 msdsl 144 ieee1394 145 if-gsn 146 dvbRccMacLayer 147 dvbRccDownstream 148 dvbRccUpstream 149 atmVirtual 150 mplsTunnel 151 srp 152 voiceOverAtm 153 voiceOverFrameRelay 154 idsl 155 compositeLink 156 ss7SigLink 157 propWirelessP2P 158 frForward 159 rfc1483 160 usb 161 ieee8023adLag 162 bgppolicyaccounting 163 frf16MfrBundle 164 h323Gatekeeper 165 h323Proxy 166 mpls 167 mfSigLink 168 hdsl2 169 shdsl 170 ds1FDL 171 pos 172 dvbAsiIn 173 dvbAsiOut 174 plc 175 nfas 176 tr008 177 gr303RDT 178 gr303IDT 179 isup 180 propDocsWirelessMaclayer 181 propDocsWirelessDownstream 182 propDocsWirelessUpstream 183 hiperlan2 184 propBWAp2Mp 185 sonetOverheadChannel 186 digitalWrapperOverheadChannel 187 aal2 188 radioMAC 189 atmRadio 190 imt 191 mvl 192 reachDSL 193 frDlciEndPt 194 atmVciEndPt 195 opticalChannel 196 opticalTransport 197 propAtm 198 voiceOverCable 199 infiniband 200 teLink 201 q2931 202 virtualTg 203 sipTg 204 sipSig 205 docsCableUpstreamChannel 206 econet 207 pon155 208 pon622 209 bridge 210 linegroup 211 voiceEMFGD 212 voiceFGDEANA 213 voiceDID 214 mpegTransport 215 sixToFour 216 gtp 217 pdnEtherLoop1 218 pdnEtherLoop2 219 opticalChannelGroup 220 homepna 221 gfp 222 ciscoISLvlan 223 actelisMetaLOOP 224 fcipLink 225 rpr 226 qam 227 lmp 228 cblVectaStar 229 docsCableMCmtsDownstream 230 adsl2 231 macSecControlledIF 232 macSecUncontrolledIF 233 aviciOpticalEther 234 atmbond 235 voiceFGDOS 236 mocaVersion1 237 ieee80216WMAN 238 adsl2plus 239 dvbRcsMacLayer 240 dvbTdm 241 dvbRcsTdma 242 x86Laps 243 wwanPP 244 wwanPP2 245 voiceEBS 246 ifPwType 247 ilan 248 pip 249 aluELP 250 gpon 251 vdsl2 252 capwapDot11Profile 253 capwapDot11Bss 254 capwapWtpVirtualRadio 255 bits 256 docsCableUpstreamRfPort 257 cableDownstreamRfPort 258 vmwareVirtualNic 259 ieee802154 260 otnOdu 261 otnOtu 262 ifVfiType 263 g9981 264 g9982 265 g9983 266 aluEpon 267 aluEponOnu 268 aluEponPhysicalUni 269 aluEponLogicalLink 270 aluGponOnu 271 aluGponPhysicalUni 272 vmwareNicTeam 277 docsOfdmDownstream 278 docsOfdmaUpstream 279 gfast 280 sdci 281 xboxWireless 282 fastdsl 283 docsCableScte55d1FwdOob 284 docsCableScte55d1RetOob 285 docsCableScte55d2DsOob 286 docsCableScte55d2UsOob 287 docsCableNdf 288 docsCableNdr 289 ptm 290 ghn 291 otnOtsi 292 otnOtuc 293 otnOduc 294 otnOtsig 295 microwaveCarrierTermination 296 microwaveRadioLinkTerminal 297 ieee8021axDrni 298 ax25 299 ieee19061nanocom 300 cpri 301 omni 302 roe 303 p2pOverLan	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.2
apRadioIfMTU The max tramsform unit of the interface	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.3
apRadioIfSpeed The speed of the interface	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.4
apRadioIfMacAddress The MAC address of the interface.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.5
apRadioIfDiversity Is diversity supported.	Enumeration Enumerated Values: 0 no 1 yes	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.6
apRadioIfAdminStatus the administration of interface status.	Enumerationr/w Enumerated Values: 1 up 2 down 3 admindown	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.7
apRadioIfOperStatus Current status of the interface .	Enumeration Enumerated Values: 1 up 2 down 3 admindown	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.8
apRadioIfLastChange The last time of current status.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.9
apRadioChannelAutoSelectEnable Decide wether to auto-select radio channel.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.10
apRadioChannelConfig Set radio channel by hand.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.11
apRadioChannelUsing The current using radio channel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.12
apCurrRadioModeSupport The radio model supported.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.13
apRadioModeConfig config radio channel.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.14
apTransmitSpeedConfig transmit speed config	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.15
apMaxTxPwrLvl The max transmit power	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.16
apTxPwr Transmit power setup.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.17
apPwrAttRange The range of power attenuation.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.18
apPwrAttValue config power attenuation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.19
apAntennaGain Antenna Gain.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.20
apPowerMgmtEnable whether to open auto power control.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.21
apMaxStationNumPermitted The max number of terminal the interface can suopport.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.22
apAMPDUEnabled A-MPDU Switch.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.23
apBWMode Bandwidth mode select.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.24
apShortGIEnabled Short GI switch.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.25
apIs11nOnly whether access 11n terminal.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.1.1.26

The table describe the physical parameter cofiguration of radio interface.

apRadioInterfacePhyParaEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.3.2.1

The entry of apRadioInterfacePhyParaTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
apBeaconIntvl The interval of beacon.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.2.1.1
apDtimIntvl The interval of DTIM.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.2.1.2
apRtsThreshold Rts Threshold.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.2.1.3
apFragThreshlod Frag Threshold.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.2.1.4
apPreambleLen Preamb Length.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.3.2.1.5

The table describe the SSID cofiguration of radio interface.

apRadioIfSSIDCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.4.2.1

The entry of cmApSSIDCfgTable.

Indexes

RFC1213-MIBifIndex apWlanId

Column	Syntax	OID
apBSSID virtual BSSID.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.2.1.1

The table describe the SSID cofiguration of radio interface.

apSSIDCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1

The entry of apSSIDCfgTable.

Indexes

apWlanId

Column	Syntax	OID
apWlanId The index of the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.1
apSSIDName SSID Name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.2
apSSIDEnabled whether to enable SSID.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.3
apSSIDHidden Whether to broadcast SSID.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.4
apStaIsolate Whether to isolate SSID.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.5
apDot11Auth 802.11 authentication.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.6
apSecurity security type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.7
apAuthenMode authentication mode.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.8
apSecurityCiphers encryption type.	Enumerationr/w Enumerated Values: 0 none 1 wep40 2 wep104 3 tkip 4 aesccmp 5 wapisms4	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.9
apVlanId vlan id.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.10
apMaxSimultUsers The max supported users.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.11
apStaUplinkMaxRate The max up-lind speed for terminal.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.12
apStaDwlinkMaxRate The max down-lind speed for terminal.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.13
apSSIDCfgStatus The status column used for creating and deleting instances of the columnar objects in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.80.8.4.3.1.14

The table discribe the security configuration of the AP

apSecurityCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.5.1.1

The entry of apSecurityCfgTable.

Indexes

apWlanId

Column	Syntax	OID
apWEPCipherKeyIndex WEP cipher key index.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.5.1.1.1
apWEPCipherKeyValue WEP Cipher key value.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.5.1.1.2
apWEPCipherKeyCharType WEP Cipher key char type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.5.1.1.3
apPSKCipherKeyValue PSK Cipher key value.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.5.1.1.4
apPSKCipherKeyCharType PSK Cipher key value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.5.1.1.5
apWAPIASIPAddress IP address of WAPI AS.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.80.8.5.1.1.6
apWAPIIsInstalledCer Is Certificate installed.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.5.1.1.7

The table discribe the security configuration of the AP

apTerminalInfoEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1

The entry of apSecurityCfgTable.

Indexes

apStaMAC

Column	Syntax	OID
apStaMAC The MAC address of the termal.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.1
apStaWMMAttr VMM attribute of the terminal.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.2
apStaIPAddress IP address of the terminal.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.3
apStaRadioMode radio mode of the terminal.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.4
apStaRadioChannel Radio channel of the terminal.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.5
apStaTxRates Current rate of the terminal.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.6
apStaPowerSaveMode Power save mode of the terminal	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.7
apStaVlanId Vlan id where the terminal located.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.8
apStaSSIDName SSID name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.9
apStaDot11Auth 802.11 authentication.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.10
apStaSecurity Security type.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.11
apStaAuthenMode authentication mdoe.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.12
apStaSecurityCiphers Encryption mode.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.6.1.1.13

The table discribe radio interface configuration information of QOS

apQosRadioIfCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.7.1.1

The entry of apQosRadioIfCfgTable.

Indexes

RFC1213-MIBifIndex apQoSTrafficClassIndex

Column	Syntax	OID
apQoSTrafficClassIndex ap QOS Service type 0:bestEffort 1:background 2:video 3:voice.	Enumeration Enumerated Values: 0 bestEffort 1 background 2 video 3 voice	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.1.1.1
apQosAIFS AIFS.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.1.1.2
apQoSCWmin CW Min.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.1.1.3
apQoSCWmax CW Max.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.1.1.4
apQoSTXOPLim TXOP Limit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.1.1.5

The table discribe basic performance configuration information of QOS

apQosBaseCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1

The entry of apQosBaseCfgTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
apQoSBaseTrafficClass Provide QoS service type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.1
apQoSEnabled Is QoS enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.2
apQoSBW Total bandwidth of QoS server.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.3
apQoSResPercent Qos resource percentage.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.4
apQoSsharedBW Qos shared bandwidth.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.5
apQoSsharedBWPercent Qos shared bandwidth percentage	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.6
apSchedAlgName The scheduling algorithm between different Qos service.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.7
apResPolicyEnabled Is resource Policy enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.8
apResPolicyName the name of resource occupy policy.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.9
apBackgroundSvcAvgSpeed Avearage speed of background service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.10
apBackgroundSvcMaxBurst The max burst of background service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.11
apBackgroundSvcPriority Schedule priority of background service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.12
apBackgroundSvcResPriority Resource occupy priority of background service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.13
apBestEffortSvcAvgSpeed Avearage speed of BestEffort service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.14
apBestEffortSvcMaxBurst The max burst of BestEffort service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.15
apBestEffortSvcPriority Schedule priority of BestEffort service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.16
apBestEffortSvcResPriority Resource occupy priority of BestEffort service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.17
apVoiceSvcAvgSpeed Avearage speed of voice service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.18
apVoiceSvcMaxBurst The max burst of voice service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.19
apVoiceSvcPriority Schedule priority of voice service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.20
apVoiceSvcResPriority Resource occupy priority of voice service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.21
apVideoSvcAvgSpeed Avearage speed of Video service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.22
apVideoSvcMaxBurst The max burst of Video service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.23
apVideoSvcPriority Schedule priority of Video service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.24
apVideoSvcResPriority Resource occupy priority of Video service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.2.1.25

The table discribe the QoS performance 
configuration of Background QoS service.

apQosBackgroundCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.7.3.1

The entry of apQosBackgroundCfgTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
apBgMaxSvcCnt The max Concurrence of the service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.3.1.1
apBgSvcBW The bandwidth distributed by the service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.3.1.2
apBgSvcBWPercent The service-distribute bandwidth percentage.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.3.1.3
apBgIsUseWREDAlg Is WRED algorithm used?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.3.1.4
apBgIsUseTrafficShaping Is traffic shaping used?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.3.1.5

The table discribe the QoS performance 
configuration of BestEffort QoS service.

apQosBestEffortCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.7.4.1

The entry of apQosBestEffortCfgTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
apBeMaxSvcCnt The max Concurrence of the service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.4.1.1
apBeSvcBW The bandwidth distributed by the service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.4.1.2
apBeSvcBWPercent The service-distribute bandwidth percentage.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.4.1.3
apBeIsUseWREDAlg Is WRED algorithm used?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.4.1.4
apBeIsUseTrafficShaping Is traffic shaping used?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.4.1.5

The table discribe the QoS performance 
configuration of Voice QoS service.

apQosVoiceCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.7.5.1

The entry of apQosVoiceCfgTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
apVoiceMaxSvcCnt The max Concurrence of the service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.5.1.1
apVoiceSvcBW The bandwidth distributed by the service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.5.1.2
apVoiceSvcBWPercent The service-distribute bandwidth percentage.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.5.1.3
apVoiceIsUseStreamBasedQueue Is stream baseed queue used?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.5.1.4
apVoiceStreamMaxQueueLen Is stream max queue used?	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.5.1.5
apVoiceStreamAvgSpeed The avearage speed of the stream	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.5.1.6
apVoiceStreamMaxBurst The max burst of the stream	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.5.1.7
apVoiceIsUseWREDAlg Is WRED algorithm used?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.5.1.8
apVoiceIsUseTrafficShaping Is traffic shaping used?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.5.1.9

The table discribe the QoS performance 
configuration of Vedio QoS service.

apQosVedioCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.7.6.1

The entry of apQosVedioCfgTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
apVedioMaxSvcCnt The max Concurrence of the service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.6.1.1
apVedioSvcBW The bandwidth distributed by the service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.6.1.2
apVedioSvcBWPercent The service-distribute bandwidth percentage.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.6.1.3
apVedioIsUseStreamBasedQueue Is stream baseed queue used?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.6.1.4
apVedioStreamMaxQueueLen Is stream max queue used?	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.6.1.5
apVedioStreamAvgSpeed The avearage speed of the stream	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.6.1.6
apVedioStreamMaxBurst The max burst of the stream	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.6.1.7
apVedioIsUseWREDAlg Is WRED algorithm used?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.6.1.8
apVedioIsUseTrafficShaping Is traffic shaping used?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.7.6.1.9

The table discribe the WAPI protocol configuration of the AP

apWapiProtocolCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1

The entry of apWapiProtocolCfgTable.

Indexes

apWlanId

Column	Syntax	OID
apConfigVersion The highest version the WAPI can support.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.1
apControlledAuthControl Whether to invocate authentication.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.2
apControlledPortControl The control type of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.3
apWapiOptionImplemented Is WAPI supported.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.4
apWapiPreauthImplemented Is WAPI authentication supported.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.5
apWapiEnabled Is WAPI enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.6
apWapiPreauthEnabled Is WAPI authentication enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.7
apUnicastKeysSupported Unicast key number supported.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.8
apUnicastRekeyMethod Unicast key update method.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.9
apUnicastRekeyTime The effective time of Unicast key.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.10
apUnicastRekeyPackets The effective package number of unicast key.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.11
apMulticastCipher Multicast encryption	OctetStringr/w	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.12
apMulticastRekeyMethod Multicast key update method.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.13
apMulticastRekeyTime The effective time of multicast key.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.14
apMulticastRekeyPackets The effective package number of multicast key.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.15
apMulticastRekeyStrict Whether to invocate multicast key when terminal leaves from BSS.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.16
apPSKValue PSK value.	OctetStringr/w	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.17
apPSKPassPhrase PSK pass phrase.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.18
apCertificateUpdateCount Retry time of Certification.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.19
apMulticastUpdateCount Retry time of MSK.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.20
apUnicastUpdateCount Retry time of unicast key.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.21
apMulticastCipherSize Bit length of multicast key.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.22
apBKLifetime The life time of broadcast key.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.23
apBKReauthThreshold Threshold of reauthentucation.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.24
apSATimeout Time out of safe conection.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.25
apAuthSuiteSelected AKM selected.	OctetString	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.26
apUnicastCipherSelected Encryption type selected by last unicast.	OctetString	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.27
apMulticastCipherSelected ncryption type selected by last multicast.	OctetString	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.28
apBKIDUsed BKID used.	OctetString	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.29
apAuthSuiteRequested The selection requested by last AKM.	OctetString	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.30
apUnicastCipherRequested The selection requested by last unicast.	OctetString	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.31
apMulticastCipherRequested The selection requested by last multicast.	OctetString	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.1.1.32

The table discribe the WAPI unicast encryption configuration of the AP

apWapiUnicastCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.8.2.1

The entry of apWapiUnicastCfgTable.

Indexes

apWlanId

Column	Syntax	OID
apUnicastCipher The unicast encryption selected.	OctetString	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.2.1.1
apUnicastCipherEnabled Wether to enable unicast encryption.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.2.1.2
apUnicastCipherSize The bit length of unicase key.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.2.1.3

The table discribe the AKM configuration of the AP

apWapiAKMCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.8.3.1

The entry of apWapiAKMCfgTable.

Indexes

apWlanId

Column	Syntax	OID
apAuthenticationSuite The AKM selected.	OctetString	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.3.1.1
apAuthenticationSuiteEnabled Wether to enable AKM.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.80.8.8.3.1.2

The table discribe the system log configuration of the AP.

apSyslogSvrCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.9.3.1

The entry of apSyslogSvrCfgTable.

Indexes

apSyslogSvrIndex

Column	Syntax	OID
apSyslogSvrIndex The index of the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.9.3.1.1
apSyslogServerAddr Address of syslog server.	SNMPv2-TCTAddressr/w Type Constraints: range: 1..255 Description: Denotes a transport service address. A TAddress value is always interpreted within the context of a TDomain value. Thus, each definition of a TDomain value must be accompanied by a definition of a textual co…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.9.3.1.2
apSyslogStatus Address of syslog server.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.80.8.9.3.1.3

Terminal white list

apTerminalPermitEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.12.1.1

The entry of apTerminalPermitTable.

Indexes

apWhiteListIndex

Column	Syntax	OID
apWhiteListIndex The index of the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.12.1.1.1
apPermitMAC The permited MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.12.1.1.2
apWhiteListStatus The status column used for creating and deleting instances of the columnar objects in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.80.8.12.1.1.3

Terminal black list

apTerminalDeniedEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.12.2.1

The entry of apTerminalDeniedTable.

Indexes

apBlackListIndex

Column	Syntax	OID
apBlackListIndex The index of the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.12.2.1.1
apAttackDeviceMAC The Denied MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.12.2.1.2
apBlackListStatus The status column used for creating and deleting instances of the columnar objects in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.80.8.12.2.1.3

Configuration of trap address

apTrapAddrEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.13.9.1

The entry of apTrapAddrTable.

Indexes

apTrapDesAddrIndex

Column	Syntax	OID
apTrapDesAddrIndex The index of the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.13.9.1.1
apTrapDesIPAddress Trap address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.80.8.13.9.1.2
apTrapAddrStatus The status column used for creating and deleting instances of the columnar objects in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.80.8.13.9.1.3

Configuration of trap enabled

apTrapEnabledEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.13.10.1

The entry of apTrapEnabledTable.

Indexes

apTrapEnabledIndex

Column	Syntax	OID
apTrapEnabledIndex index of apTrapEnabledTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.13.10.1.1
apTrapName Trap name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.13.10.1.2
apTrapDescr Trap description.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.80.8.13.10.1.3
apTrapOnOff Trap switch.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.13.10.1.4

Configuration of vlan

apVlanConfigEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.8.14.10.1

The entry of apVlanConfigTable.

Indexes

apWlanId

Column	Syntax	OID
apVlanCfgVlanId Vlan ID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.80.8.14.10.1.1
apVlanCfgStatus The status column used for creating and deleting instances of the columnar objects in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.80.8.14.10.1.2

Statistic of wired interface performance.

apWiredIfPfmStatEntry row .1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1

The entry of apWiredIfPfmStatTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
apIfInUcastPkts Unicast packages received by the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1.1
apIfInNUcastPkts Non-Unicast packages received by the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1.2
apIfInOctets Total bytes received by the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1.3
apIfInDiscardPkts Packages discarded by the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1.4
apIfInErrors Error packages received by the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1.5
apIfOutUcastPkts Unicast packages sent by the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1.6
apIfOutNUcastPkts Non-unicast packages sent by the port..	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1.7
apIfOutOctets total bytes sent by the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1.8
apIfOutDiscardPkts Packages discarded by the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1.9
apIfOutErrors Error packages received by the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1.10
apIfUpDwnTimes Updown times of the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.80.9.3.1.1.11