QTECH-VPLS-BGP-MIB Table View – Observium MIB Browser

qtechvplsBgpVETable

table

.1.3.6.1.4.1.27514.1.1.10.2.79.1.1 · 1 row entry · 5 columns

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk qtechvplsBgpVETable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-VPLS-BGP-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-VPLS-BGP-MIB::qtechvplsBgpVETable'

This table associates VPLS Edge devices to a VPLS instance

qtechvplsBgpVEEntry row .1.3.6.1.4.1.27514.1.1.10.2.79.1.1.1

An entry in this table is created for each VE Id
configured on a PE for a particular VPLS service
instance.

Indexes

QTECH-VPLS-GENERIC-MIBqtechvplsConfigIndex qtechvplsBgpVEindex

Column Syntax OID

qtechvplsBgpVEindex

Unique index for the conceptual row identifying
VE in a VPLS instance.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.79.1.1.1.1

qtechvplsBgpVEId

A secondary index identifying a VE within an
instance of a VPLS service.

Unsigned32r/w

Constraints:
range: 1-256

.1.3.6.1.4.1.27514.1.1.10.2.79.1.1.1.2

qtechvplsBgpRangeSize

Specifies the range size for the given VE ID.

Unsigned32r/w

Constraints:
range: 1-256

.1.3.6.1.4.1.27514.1.1.10.2.79.1.1.1.3

qtechvplsBgpVEPreference

Specifies the preference of the VE Id on this PE
if the site is multi-homed and VE Id is re-used.

Set this 0 if the site is NOT dual-homed or multi-homed.

Unsigned32

Constraints:
range: 0-256

.1.3.6.1.4.1.27514.1.1.10.2.79.1.1.1.4

qtechvplsBgpVERowStatus

This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except qtechvplsBgpSiteRowStatus.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.27514.1.1.10.2.79.1.1.1.5

qtechvplsBgpPwBindTable

table

.1.3.6.1.4.1.27514.1.1.10.2.79.1.2 · 1 row entry · 2 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk qtechvplsBgpPwBindTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-VPLS-BGP-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-VPLS-BGP-MIB::qtechvplsBgpPwBindTable'

This table provides BGP specific information for
an association between a VPLS service and the
corresponding Pseudo Wires. A service can have more
than one Pseudo Wire association. Pseudo Wires are
defined in the pwTable.

qtechvplsBgpPwBindEntry row .1.3.6.1.4.1.27514.1.1.10.2.79.1.2.1

Each row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the …

Indexes

QTECH-VPLS-GENERIC-MIBqtechvplsConfigIndex QTECH-VPLS-GENERIC-MIBqtechvplsPwBindIndex

Column	Syntax	OID
qtechvplsBgpPwBindLocalVEId Identifies the local VE that this Pseudo Wire is associated with.	Unsigned32 Constraints: `range: 1-256`	`.1.3.6.1.4.1.27514.1.1.10.2.79.1.2.1.1`
qtechvplsBgpPwBindRemoteVEId Identifies the remote VE that this Pseudo Wire is associated with.	Unsigned32 Constraints: `range: 1-256`	`.1.3.6.1.4.1.27514.1.1.10.2.79.1.2.1.2`