QTECH-URPF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
12

qtechUrpfTable

table
.1.3.6.1.4.1.27514.1.1.10.2.46.0.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechUrpfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-URPF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-URPF-MIB::qtechUrpfTable' 
This table contains summary information for the
managed device on URPF dropping.
qtechUrpfEntry row .1.3.6.1.4.1.27514.1.1.10.2.46.0.2.1.1
If the managed device supports URPF dropping,
a row exists for each IP version type (v4 and v6).
A row contains summary information on URPF
dropping over the entire managed device.
Indexes
Column Syntax OID
qtechUrpfIpVersion
Specifies the version of IP forwarding on an interface
to which the table row URPF counts, rates, and
configuration apply.
Enumeration
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.2.1.1.1
qtechUrpfDrops
Sum of dropped IP version qtechUrpfIpVersion packets failing
a URPF check. This value is the sum of drops of packets
received on all interfaces of the managed device.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.2.1.1.2
qtechUrpfDropRate
The rate of packet drops of IP version qtechUrpfIpVersion
packets due to URPF for the managed device. The
per-interface drop rate notification is issued on rates
exceeding a limit (rising rate). This dropping may
in…
packets per secondSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.2.1.1.3

qtechUrpfIfMonTable

table
.1.3.6.1.4.1.27514.1.1.10.2.46.0.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechUrpfIfMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-URPF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-URPF-MIB::qtechUrpfIfMonTable' 
This table contains information on URPF dropping on
an interface.
qtechUrpfIfMonEntry row .1.3.6.1.4.1.27514.1.1.10.2.46.0.2.2.1
If IPv4 packet forwarding is configured on an interface,
and is configured to perform URPF checking, a row appears
in this table with indices [ifIndex][ipv4]. If IPv4
packet forwarding is deconfigured, or URPF checking
…
Indexes
Column Syntax OID
qtechUrpfIfIpVersion
Specifies the version of IP forwarding on an interface
to which the table row URPF counts, rates, and
configuration apply.
Enumeration
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.2.2.1.1
qtechUrpfIfDrops
The number of IP packets of version qtechUrpfIfIpVersion
failing the URPF check and dropped by the managed device
on a particular interface.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.2.2.1.2
qtechUrpfIfDropRate
The rate of packet drops of IP version qtechUrpfIfIpVersion
packets due to URPF on the interface.

This object is the average rate of dropping over the most
recent interval of time.The rate is computed by…
packets/secondSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.2.2.1.3

qtechUrpfIfConfTable

table
.1.3.6.1.4.1.27514.1.1.10.2.46.0.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechUrpfIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-URPF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-URPF-MIB::qtechUrpfIfConfTable' 
This table contains statistics information on URPF on
an interface.
qtechUrpfIfConfEntry row .1.3.6.1.4.1.27514.1.1.10.2.46.0.3.1.1
A row exists in this table if a row exists
in qtechUrpfIfMonTable.
Indexes
No indexes recorded
Column Syntax OID
qtechUrpfIfCheckStrict
Interface configuration indicating the strictness of
the reachability check performed
on the interface.
- none: not enable urpf check in this interface.
- strict: check that source addr is reachable via
the…
Enumeration
Enumerated Values:
0none
1strict
2loose
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.3.1.1.1
qtechUrpfIfDropRateNotifyEnable
This object specifies whether the system produces the
qtechUrpfIfDropRateNotify notification as a result of URPF
dropping of version qtechUrpfIfIpVersion IP packets on this
interface. A false value prevents such noti…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.3.1.1.2
qtechUrpfIfNotifyDropRateThreshold
When the calculated rate of URPF packet drops
(qtechUrpfIfDropRate) meets or exceeds the value
specified by this object, a qtechUrpfIfDropRateNotify
notification is sent if qtechUrpfIfDropRateNotifyEnable
is set to …
packets/secondSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.3.1.1.3
qtechUrpfIfNotifyDrHoldDownReset
Setting this object to true causes the five-minute
hold-down timer for emitting URPF drop rate
notifications for IP version qtechUrpfIfIpVersion on
the interface to be short-circuited. If a notification
is due and …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.3.1.1.4
qtechUrpfIfWhichRouteTableID
Interface configuration indicating the routing table
consulted for the reachability check:
- default: the non-private routing table for of the
managed system.
- vrf : a particular VPN routing table.
Enumeration
Enumerated Values:
1default
2vrf
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.3.1.1.5
qtechUrpfIfVrfName
If the value of qtechUrpfIfWhichRouteTableID is 'vrf',
the name of the VRF Table. Otherwise a zero-length
string.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.27514.1.1.10.2.46.0.3.1.1.6