QTECH-TRAFFIC-CTRL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
8

qtechPtTrafficCtrlTable

table
.1.3.6.1.4.1.27514.1.1.10.2.14.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechPtTrafficCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-TRAFFIC-CTRL-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-TRAFFIC-CTRL-MIB::qtechPtTrafficCtrlTable' 
list of port-based traffic control configuration objects.
qtechPtTrafficCtrlEntry row .1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1
Entry contains port-based traffic control configuration objects.
Indexes
Column Syntax OID
qtechPtTrafficCtrlIfIndex
 QTECH-TCIfIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.1
qtechPtProtectedPortStatus
Some applications require that no traffic be forwarded by the
Layer 2 protocol between ports on the same switch. In such an
environment, there is no exchange of unicast, broadcast,
or multicast traffic betweenports o…
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.2
qtechPtBroadcastStormControlStatus
the broadcast storm control status of a port, can be opened by setting its
value to Enabled(1), or closed by setting its value to Disabled(2).

This attribute apply physical port and aggreate port
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.3
qtechPtMulticastStormControlStatus
the multicast storm control status of a port, can be opened by setting its
value to Enabled(1), or closed by setting its value to Disabled(2).

This attribute apply physical port and aggreate port
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.4
qtechPtUnicastStormControlStatus
the unknown unicast storm control status of a port, can be opened by setting its
value to Enabled(1), or closed by setting its value to Disabled(2).

This attribute apply physical port and aggreate port
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.5
qtechPtBroadcastStormControlLevel
The percentage of maximal traffic allowed to go through the broadcast packets in the interface bandwidth.
When the traffic of broadcast packets exceeds the percentage, the broadcast packets correspondent with
the excee…
Percentr/w
Type Constraints:
range: 1..100
Description:
An integer that is in the range of a percent value.
 .1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.6
qtechPtMulticastStormControlLevel
The percentage of maximal traffic allowed to go through the multicast packets in the interface bandwidth.
When the traffic of multicast packets exceeds the percentage, the multicast packets correspondent with
the excee…
Percentr/w
Type Constraints:
range: 1..100
Description:
An integer that is in the range of a percent value.
 .1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.7
qtechPtUnicastStormControlLevel
The percentage of maximal traffic allowed to go through the unknown unicast packets in the interface bandwidth.
When the traffic of unknown unicast packets exceeds the percentage, the unknown unicast packets corresponde…
Percentr/w
Type Constraints:
range: 1..100
Description:
An integer that is in the range of a percent value.
 .1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.8