QTECH-ROUTE-MIB Table View

The routing protocol infomation .

qtechRoutingProtoInfoEntry row .1.3.6.1.4.1.27514.1.1.10.2.20.1.2.1

the entry of this table.

Indexes

qtechRoutingProtoInfoProtoType qtechRoutingProtoInfoGateWay

Column	Syntax	OID
qtechRoutingProtoInfoProtoType The routing protocol type	QtechRouteProtoType Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isis 10 esis 11 ciscoigrp 12 bbnspfigp 13 ospf 14 bgp 15 idpr 16 ciscoeigrp 17 max Description: Routing protocol type.	.1.3.6.1.4.1.27514.1.1.10.2.20.1.2.1.1
qtechRoutingProtoInfoGateWay For rip ,the gateway is this router's neighbor. for ospf ,the gateway is the router Id of this router, New entry will be addded when router ID is changed.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.20.1.2.1.2
qtechRoutingProtoInfoDistance The routing protocol distance.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.20.1.2.1.3
qtechRoutingProtoInfoLastUpdate The last update time of the neighbor that be found. or router ID that it last change .	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.20.1.2.1.4

Default routing configuration.

qtechDefRoutingCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.20.1.3.1

The entry define one routing protocol's default
routing configurate,if in rip routing configuration
only route map is valid to this default route parameter

Indexes

qtechDefRoutingCfgRoutingProtoType

Column	Syntax	OID
qtechDefRoutingCfgRoutingProtoType index indicate that which routing protocol configuration mode is current mode.	QtechRouteProtoType Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isis 10 esis 11 ciscoigrp 12 bbnspfigp 13 ospf 14 bgp 15 idpr 16 ciscoeigrp 17 max Description: Routing protocol type.	.1.3.6.1.4.1.27514.1.1.10.2.20.1.3.1.1
qtechDefRoutingCfgAlways Setting the value to TRUE indicates that always advertise default route.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.20.1.3.1.2
qtechDefRoutingCfgMetric Set ospf default metric value.	Unsigned32r/w Constraints: range: 1-16777214	.1.3.6.1.4.1.27514.1.1.10.2.20.1.3.1.3
qtechDefRoutingCfgMetricType Set OSPF Link State type,this value is only valid in ospf configuration	Enumerationr/w Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.27514.1.1.10.2.20.1.3.1.4
qtechDefRoutingCfgRouteMap Set route's Route-map reference.Null string indicate that no any route-map reference.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.20.1.3.1.5
qtechDefRoutingCfgStatus if this value is change to destroy, this entry will be deleted	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.20.1.3.1.6

the route map table.

qtechRouteMapEntry row .1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1

the entry of this table.

Indexes

qtechRouteMapName qtechRouteMapSequenceNumber

Column	Syntax	OID
qtechRouteMapName The route map name ,A meaningful name for the route map. The redistribute router configuration command uses this name to reference the route map. Multiple route maps might share the same map tag name. Wh…	SNMPv2-TCDisplayString Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.1
qtechRouteMapSequenceNumber Number that indicates the position of a new route map in the list of route maps already configured with the same name.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.2
qtechRouteMapOperType If permit is specified and the match criteria are met for this route map, the route is redistributed as controlled by the set actions. If deny is specified, the route is not redistributed.	Enumeration Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.3
qtechRouteMapMatchMetric Match the specified route metric. The metric-value can be an IGRP 5-part metric with a value from 1 to 255. 0 indicate that this item will not be matched.	Unsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.4
qtechRouteMapMatchRouteType the route type value which route-map match, internal: OSPF intra-area and interarea routes or EIGRP internal routes, external: OSPF external routes(Type 1 or Type 2)or EIGRP external routes, external-type1: OSPF externa…	Enumerationr/w Enumerated Values: 0 notMatch 1 internal 2 external 3 external-type1 4 external-type2	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.5
qtechRouteMapMetricValueType How to modify old metric vlaue. 'noOper': metric value will not be modified. 'replace': old metric value will be replaced by qtechRouteMapSetMetric. 'add': new metric value will equal 'old metric vlaue + qtechRouteMap…	Enumerationr/w Enumerated Values: 0 noOper 1 replace 2 add 3 reduce	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.6
qtechRouteMapSetMetric Set the metric value to the given redistributed routes (for any protocol except IGRP or EIGRP). The metric value is an integer from 1 to 255. qtechRouteMapMetricValueType will decide real operation. The …	Unsigned32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.7
qtechRouteMapSetLevel Set the level for routes that are advertised into the specified area of the routing domain. 'all'indicate that routes will be advertised into all type area.	Enumerationr/w Enumerated Values: 0 all 1 stubarea 2 backbone	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.8
qtechRouteMapSetMetricType set metric type, 'external' means IS-IS external metric; 'internal' means Use IGP metric as the MED for BGP; 'type-1 ' means OSPF external type 1 metric; 'type-2 ' means OSPF external type 2 metric. 'noOper'indi…	Enumerationr/w Enumerated Values: 0 noOper 1 internal 2 external 3 type1 4 type2	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.9
qtechRouteMapSetNexthopSt How to modify nexthop vlaue. 'invalid': nexthop value will not be modified. 'valid': nexthop value will be modified to qtechRouteMapSetNexthop. Setting this value to 'valid' have no any effect.This value will be change…	QTECH-TCConfigStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.10
qtechRouteMapSetNexthop Set the nexthop value to give the redistributed routes	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.11
qtechRouteMapStatus if this value is destroy,the entry will be delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.20.2.1.1.12

the match ip address item of the route map .

qtechRouteMapMatchIpAddressEntry row .1.3.6.1.4.1.27514.1.1.10.2.20.2.2.1

Match a standard access list by specifying the Acl name

Indexes

qtechRouteMapName qtechRouteMapSequenceNumber qtechRouteMapMatchType qtechRouteMapMatchIpAddressAclName

Column	Syntax	OID
qtechRouteMapMatchType destination(1):match route destination ip address nextHop(2):match route nextHop ip address source(3):match route source ip address	Enumeration Enumerated Values: 1 destination 2 nextHop 3 source	.1.3.6.1.4.1.27514.1.1.10.2.20.2.2.1.1
qtechRouteMapMatchIpAddressAclName The acl name apply to ip address. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). …	SNMPv2-TCDisplayString Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.20.2.2.1.2
qtechRouteMapMatchIpAddressStatus The entry status,if the value is destroy ,the entry will be deleted.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.20.2.2.1.3

Match a tag value item of route map

qtechRouteMapMatchTagEntry row .1.3.6.1.4.1.27514.1.1.10.2.20.2.3.1

Match the specified tag value in a list of one or more route
tag values. Each can be an integer from 0 to 4294967295.

Indexes

qtechRouteMapName qtechRouteMapSequenceNumber qtechRouteMapMatchTagValue

Column	Syntax	OID
qtechRouteMapMatchTagValue Match the specified tag value.	Unsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.2.3.1.1
qtechRouteMapMatchTagStatus the entry status,if the value is destroy ,the entry will be deleted.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.20.2.3.1.2

Match Interface item of route map .

qtechRouteMapMatchInterfaceEntry row .1.3.6.1.4.1.27514.1.1.10.2.20.2.4.1

Match the specified next hop route out one of the specified
interfaces.

Indexes

qtechRouteMapName qtechRouteMapSequenceNumber qtechRouteMapMatchInterfaceIfIndex

Column	Syntax	OID
qtechRouteMapMatchInterfaceIfIndex The ifTable's ifIndex.	QTECH-TCIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.2.4.1.1
qtechRouteMapMatchInterfaceStatus the entry status,if the value is destroy ,the entry will be deleted.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.20.2.4.1.2

this table descripts the redistributing methods.

qtechRouteRedistributeEntry row .1.3.6.1.4.1.27514.1.1.10.2.20.3.1.1

each entry descripts the methord,when Redistribute routes
from one routing protocol to another routing protocol.

Indexes

qtechRouteRedistributeProtocolCfg qtechRouteRedistributeProtocol

Column	Syntax	OID
qtechRouteRedistributeProtocolCfg The protocol which the redistributing will be setted in.	QtechRouteProtoType Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isis 10 esis 11 ciscoigrp 12 bbnspfigp 13 ospf 14 bgp 15 idpr 16 ciscoeigrp 17 max Description: Routing protocol type.	.1.3.6.1.4.1.27514.1.1.10.2.20.3.1.1.1
qtechRouteRedistributeProtocol The protocol which routing will redistribute to .	QtechRouteProtoType Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isis 10 esis 11 ciscoigrp 12 bbnspfigp 13 ospf 14 bgp 15 idpr 16 ciscoeigrp 17 max Description: Routing protocol type.	.1.3.6.1.4.1.27514.1.1.10.2.20.3.1.1.2
qtechRouteRedistributeMetricValue 0 indicate that redistributing metric value will equal qtechOspfRouteRedisDefMetricVal for OSPF or qtechRipOffsetMetric for RIP. Other value indicate that qtechRouteRedistributeMetricValue will be set for new metric v…	Unsigned32r/w Constraints: range: 1-16777214	.1.3.6.1.4.1.27514.1.1.10.2.20.3.1.1.3
qtechRouteRedistributeMetricType Metric type value .	Enumerationr/w Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.27514.1.1.10.2.20.3.1.1.4
qtechRouteRedistributeTagValue Set tag for routes redistributed into OSPF.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.27514.1.1.10.2.20.3.1.1.5
qtechRouteRedistributeRouteMapName Set route's Route-map reference.Null string indicate that no any route-map reference.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.20.3.1.1.6
qtechRouteRedistributeStatus the entry status,if the value is destroy ,then disable this redistribute.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.20.3.1.1.7

this table descripts the ip prefix list.

qtechIpPrefixListEntry row .1.3.6.1.4.1.27514.1.1.10.2.20.4.1.1

each entry descripts a prefix list

Indexes

qtechIpPrefixListName qtechIpPrefixListSequence

Column	Syntax	OID
qtechIpPrefixListName name of ip prefix-list name.	SNMPv2-TCDisplayString Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.20.4.1.1.1
qtechIpPrefixListSequence sequence can be set either automatically or manually. if 0 is seted,that means sequence will be created automatically. In the case that sequential numbers are set manually, the user may pick any number less than 214748…	Unsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.4.1.1.2
qtechIpPrefixListOperMethod this field specifies whether the prefix for this entry is to permit or deny the listed prefix.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.27514.1.1.10.2.20.4.1.1.3
qtechIpPrefixListIpAddress ip prefix-list ip address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.20.4.1.1.4
qtechIpPrefixListMaskLength ip prefix-list mask length.	Unsigned32r/w Constraints: range: 0-32	.1.3.6.1.4.1.27514.1.1.10.2.20.4.1.1.5
qtechIpPrefixListMinimumPrefixLength this field specifies prefix length. The prefix list will be applied if the prefix length is greater than or equal to qtechIpPrefixListMinimumPrefixLength. value '0' means that this parameter has no effect. …	Unsigned32r/w Constraints: range: 0-32	.1.3.6.1.4.1.27514.1.1.10.2.20.4.1.1.6
qtechIpPrefixListMaximumPrefixLength this field specifies prefix length. The prefix list will be applied if the prefix length is less than or equal to qtechIpPrefixListMaximumPrefixLength. value '0' means that this parameter has no effect. …	Unsigned32r/w Constraints: range: 0-32	.1.3.6.1.4.1.27514.1.1.10.2.20.4.1.1.7
qtechIpPrefixListStatus the entry status,if the value is destroy ,then delete this ip prefix-list.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.20.4.1.1.8

this table descripts the distribute list.

qtechDistributeListEntry row .1.3.6.1.4.1.27514.1.1.10.2.20.4.2.1

distribute-list can be applied to both incoming
and outgoing routing information,Permit or deny
routes from being advertised in routing updates
depending upon the action listed in the access list or ip prefix list.

Indexes

qtechDistributeListCfgProtoType qtechDistributeListIfIndex qtechDistributeListDirection qtechDistributeListFilteringProtocol

Column	Syntax	OID
qtechDistributeListCfgProtoType This index indicate that which routing protocol configuration mode is current mode.	QtechRouteProtoType Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isis 10 esis 11 ciscoigrp 12 bbnspfigp 13 ospf 14 bgp 15 idpr 16 ciscoeigrp 17 max Description: Routing protocol type.	.1.3.6.1.4.1.27514.1.1.10.2.20.4.2.1.1
qtechDistributeListIfIndex The interface that this distribute list apply to. If this value is 0,it indicate that this distribute list apply in all interfaces. Other value is equal to TEXTUAL-CONVENTION 'IfIndex' meaning.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.20.4.2.1.2
qtechDistributeListDirection If direct is 'in' the distribute list is applied to input packets?? If direct is 'out' the distribute list is applied to output packets.	Enumeration Enumerated Values: 1 out 2 in	.1.3.6.1.4.1.27514.1.1.10.2.20.4.2.1.3
qtechDistributeListFilteringProtocol If this value is 0,it indicate that this distribute list will apply on all protocol. Other value is equal to TEXTUAL-CONVENTION 'QtechRouteProtoType' meaning, it indicate the protocol which this distribu…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.20.4.2.1.4
qtechDistributeListFilterType this field defines the filtering type which distribute-list used , 'acl' means filtering destination ip address of route information in incoming or outing packets; 'gateway' means filtering source ip address and mas…	Enumerationr/w Enumerated Values: 1 acl 2 gateway 3 prefix 4 prefix-gateway	.1.3.6.1.4.1.27514.1.1.10.2.20.4.2.1.5
qtechDistributeListAclName This field is valid when the field qtechDistributeListFilterType's value is 'acl',it's access list name that distribute-list reference to. Null string indicate that the distribute list will not reference any ACL	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.20.4.2.1.6
qtechDistributeListGateWayIpPrefixName this field is valid when the field qtechDistributeListFilterType's value is 'gateway',it's ip prefix list name that distribute-list source ip and mask reference to. Null string indicate that the distribut…	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.20.4.2.1.7
qtechDistributeListPrefixIpPrefixName this field is valid when the field qtechDistributeListFilterType's value is 'gateway',it's ip prefix list name that distribute-list destination ip and mask reference to. Null string indicate that the dis…	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.20.4.2.1.8
qtechDistributeListStatus the entry status,if the value is destroy ,then delete this distribute-list.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.20.4.2.1.9

This entity's IP Routing table.

qtechipCidrRouteEntry row .1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1

A particular route to a particular destina-
tion, under a particular policy.

Indexes

qtechipCidrRouteDest qtechipCidrRouteMask qtechipCidrRouteTos qtechipCidrRouteNextHop

Column	Syntax	OID
qtechipCidrRouteDest The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a valu…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.1
qtechipCidrRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteDest field. For those systems that do not support arbitrary subnet masks, an agent con…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.2
qtechipCidrRouteTos The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+--…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.3
qtechipCidrRouteNextHop On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.4
qtechipCidrRouteIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.5
qtechipCidrRouteType The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes …	Enumerationr/w Enumerated Values: 1 other 2 reject 3 local 4 remote	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.6
qtechipCidrRouteProto The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp 17 policy	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.7
qtechipCidrRouteAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.8
qtechipCidrRouteInfo A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's ipCidrRouteProto value. If this information is not…	ObjectIdentifierr/w	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.9
qtechipCidrRouteNextHopAS The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its va…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.10
qtechipCidrRouteMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.11
qtechipCidrRouteMetric2 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.12
qtechipCidrRouteMetric3 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.13
qtechipCidrRouteMetric4 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.14
qtechipCidrRouteMetric5 An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.15
qtechipCidrRouteStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.16
qtechipCidrOspfRouteType this field describles the ospf route entry's type, it's valid when this route was learned by ospf protocol.	Enumeration Enumerated Values: 0 ospf-route 1 ospf-ia-route 2 ospf-n1-route 3 ospf-n2-route 4 ospf-e1-route 5 ospf-e2-route	.1.3.6.1.4.1.27514.1.1.10.2.20.5.1.1.17