QTECH-MPLS-VPN-MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
12

qtechMplsVPNMgmtVrfTable

table
.1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechMplsVPNMgmtVrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-MPLS-VPN-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-MPLS-VPN-MGMT-MIB::qtechMplsVPNMgmtVrfTable' 
This table specified qtech mpls l3vpn vrf information.
qtechMplsVPNMgmtVrfEntry row .1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1.1
Each entry in this table is meant to correspond to an entry in the Vrf table.
Indexes
Column Syntax OID
qtechMplsVPNMgmtVrfName
The human-readable name of this VPN.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1.1.1
qtechMplsVPNMgmtVrfIntfFault
Indicates the number of fault in the interface binding this vrf.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1.1.2
qtechMplsVPNMgmtVrfVpnId
The VPN ID as specified in [RFC2685]. If a VPN ID
has not been specified for this VRF, then this
variable SHOULD be set to a zero-length OCTET
STRING.
VPN-TC-STD-MIBVPNIdOrZero
Type Constraints:
range: 0
range: 7
 .1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1.1.3
qtechMplsVPNMgmtVrfVpnIdType
The VPN ID Type
Enumeration
Enumerated Values:
1l3vpn
2l2vpn
3other
 .1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1.1.4

qtechMplsVPNMgmtVrfRteTable

table
.1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1 · 1 row entry · 8 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechMplsVPNMgmtVrfRteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-MPLS-VPN-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-MPLS-VPN-MGMT-MIB::qtechMplsVPNMgmtVrfRteTable' 
This table specified MPLS L3VPN VRF table routing information.
qtechMplsVPNMgmtVrfRteEntry row .1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1
Each entry in this table contained the routing infomation in one's vrf.
Indexes
Column Syntax OID
qtechMplsVPNMgmtRteDestType
The type of the qtechMplsVPNMgmtRteDest address, as
defined in the InetAddress MIB.
Only those address types that may appear in an actual
routing table are allowed as values of this object.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.1
qtechMplsVPNMgmtRteDest
The destination IP address of this route.
The type of this address is determined by the value of
the qtechMplsVPNMgmtRteDestType object.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.2
qtechMplsVPNMgmtRtePfxLen
Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
qtechMplsVPNMgmtRteDest field.
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.3
qtechMplsVPNMgmtRtePolicy
This object is an opaque object without any defined
semantics. Its purpose is to serve as an additional
index that may delineate between multiple entries to
the same destination. The value { 0 0 } shall be used
as the…
ObjectIdentifier .1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.4
qtechMplsVPNMgmtRteNHopType
The type of the qtechMplsVPNMgmtRteNextHop address,
as defined in the InetAddress MIB.
Value should be set to unknown(0) for non-remote
routes.
Only those address types that may appear in an actual
routing table are all…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.5
qtechMplsVPNMgmtRteNextHop
On remote routes, the address of the next system en
route. For non-remote routes, a zero-length string.
The type of this address is determined by the value of
the qtechMplsVPNMgmtRteNHopType object.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.6
qtechMplsVPNMgmtRteDscp
The Differentiated Services Code-Point of this vrf route.
DIFFSERV-DSCP-TCDscp
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.7
qtechMplsVPNMgmtRteStorageType
The storage type of this vrf route entry.
SNMPv2-TCStorageType
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.8