QTECH-GBNL3-MIB Table View

A table of subnet parameters.  There is one entry
available for each of the 'gbnL3IpSubnetMaxRows'
supported IP subnets.

gbnL3IpSubnetEntry row .1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1

A list of subnet parameters.

Indexes

gbnL3IpSubnetIfIndex gbnL3IpSubnetAgentIpAddr

Column	Syntax	OID
gbnL3IpSubnetIfIndex DURABLE: The ifIndex of the swEND driver associated with this subnet.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.1
gbnL3IpSubnetAgentIpAddr DURABLE: The network management station uses this IP Address to talk with the Agent on this subnet. This IP address logically AND'ed with 'gbnL3IpSubnetMask' yields the actual subnet value for this subnet.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.2
gbnL3IpSubnetMask DURABLE: The subnet mask for this subnet. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's must be contiguous, starting with the left most bit.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.3
gbnL3IpSubnetVidIface DURABLE: { default=0:all } For a L2/L3 hybrid switch, this object contains the actual VLAN ID (VID) from 1 to 4094 or 0 if the VID is unassigned. For a L3 only switch, this object contains the actual switch interface fr…	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.4
gbnL3IpSubnetName DURABLE: { '':all ) A user reference name for this subnet.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-16 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.5
gbnL3IpSubnetRowStatus DURABLE: This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is not supported). This object can only be set to active(1) af…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.6

????????ip??ַ????

gbnL3IpSubnetPrimaryIpEntry row .1.3.6.1.4.1.27514.1.2.5.1.1.2.4.1

????????ip??ַ????

Indexes

gbnL3IpSubnetPrimaryIpIfIndex

Column	Syntax	OID
gbnL3IpSubnetPrimaryIpIfIndex ?ӿڵ???????	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.2.5.1.1.2.4.1.1
gbnL3IpSubnetPrimaryIpIpAddr ?ӿڵ???ip??ַ??	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.2.4.1.2

A table of static routes.

gbnL3IpStaticRouteEntry row .1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1

A list of static route parameters.

Indexes

gbnL3IpStaticDestIpAddr gbnL3IpStaticMask gbnL3IpStaticNextHop

Column	Syntax	OID
gbnL3IpStaticDestIpAddr DURABLE: The static route host or subnet IP destination address. All IP destination addresses must be non-zero.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.1
gbnL3IpStaticMask DURABLE: The mask for this IP destination. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's must be contiguous, starting with the left most bit. …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.2
gbnL3IpStaticNextHop The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.3
gbnL3IpStaticName DURABLE: { '':all ) A user reference name for this Static Route.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-16 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.4
gbnL3IpStaticUseHw DURABLE: { false:all ) By setting this object to true(1), the user indicates the desire to use hardware routing for this entry. To disable hardware routing for this entry, set this object to false(2). If the underlying…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.5
gbnL3IpStaticInHw If this object is true(1), this static route is actually in the hardware Route Table. Otherwise it is false(2).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.6
gbnL3IpStaticGateway DURABLE: { false:all ) By setting this object to true(1), the user indicates that this subnet route is a gateway route (i.e., connected to external router). By setting it to false(2), the user indicates that this is a …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.7
gbnL3IpStaticWeight Weight of the ecmp route.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.8
gbnL3IpStaticRowStatus DURABLE: This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is not supported). This object can only be set to active(1) af…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.9

A table of dynamic routes generated by RIP, OSPF, other routing
protocols, and by the TCP/IP stack when creating host routes
for existing subnets.

gbnL3IpDynamicRouteEntry row .1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1

A list of dynamic route parameters.

Indexes

gbnL3IpDynamicDestIpAddr gbnL3IpDynamicMask gbnL3IpDynamicNextHop

Column	Syntax	OID
gbnL3IpDynamicDestIpAddr The dynamic route host or subnet IP destination address. All IP destination addresses must be non-zero.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.1
gbnL3IpDynamicMask The mask for this IP destination. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's must be contiguous, starting with the left most bit. N…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.2
gbnL3IpDynamicNextHop The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.3
gbnL3IpDynamicName A user reference name for this Dynamic Route.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-16 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.4
gbnL3IpDynamicUseHw By setting this object to true(1), the user indicates the desire to use hardware routing for this entry. To disable hardware routing for this entry, set this object to false(2). If the underlying switch fabric does not…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.5
gbnL3IpDynamicInHw If this object is true(1), this dynamic route is actually in the hardware Route Table. Otherwise it is false(2).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.6
gbnL3IpDynamicGateway By setting this object to true(1), the user indicates that this subnet route is a gateway route (i.e., connected to external router). By setting it to false(2), the user indicates that this is a direct route. If 'gbnL…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.7
gbnL3IpDynamicWeight Weight of the ecmp route.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.8
gbnL3IpDynamicRowStatus This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is not supported). This object can only be set to active(1) after all o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.9

Provides Routing Table access.  This table can be used to
modify or add Routing Table entries.  Changes made with this
table are not saved to NVM (nonvolatile memory).  To save
static routes to NVM, use the gbnL3IpStaticRouteTable.

gbnL3IpRouteEntry row .1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1

Provides enough routing information to support the UNIX style
'netstat -nr' command and to support maintenance of the
Routing Table.

Indexes

gbnL3IpRouteDest gbnL3IpRouteMask gbnL3IpRouteNextHopIp

Column	Syntax	OID
gbnL3IpRouteDest The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is depende…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.1
gbnL3IpRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the gbnL3IpRouteDest field. If the value of the gbnL3IpRouteDest is 0.0.0.0 (a default route), then…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.2
gbnL3IpRouteNextHopIp The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.3
gbnL3IpRouteNextHopMac The six byte MAC address of the next hop of this route. If the underlying hardware does not support this object, an octet string of zero length is returned.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.4
gbnL3IpRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.5
gbnL3IpRouteType The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of …	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 direct 4 indirect	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.6
gbnL3IpRouteProto The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 is-is 10 es-is 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.7
gbnL3IpRouteAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was l…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.8
gbnL3IpRouteMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's gbnL3IpRouteProto value. If this metric is not used, its value should be set to -…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.9
gbnL3IpRouteUsingHw This object is true(1) if this route is contained in the hardware routing table; otherwise, it is false(2).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.10
gbnL3IpRouteIsStatic This object is true(1) if this route is defined in the 'gbnL3IpStaticRouteTable'. This object is false(2) if this route was created dynamically (e.g., with RIP, OSPF) or was manually created using this table ('gbnL3IpR…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.11
gbnL3IpRouteFlags Not implemented. Returns '0'. Contains the information required for a netstat-like 'Flags' field. The flags field represents a decimal value of the flags specified for a given route. The …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.12
gbnL3IpRouteRef Not implemented. Returns '0'. Contains the information required for the netstat 'Ref' field, which indicates the number active uses for this route.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.13
gbnL3IpRouteUse Not implemented. Returns '0'. Contains the information required for the netstat 'Use' field, which indicates the number of packets sent with this route.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.14
gbnL3IpRouteWeight Weight of the ecmp route.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.15
gbnL3IpRouteRowStatus This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is not supported). This object can only be set to active(1) for the spe…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.16