QTECH-GBNDeviceSwitch-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

aggTable

table obsolete

.1.3.6.1.4.1.27514.1.2.2.1.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk aggTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-GBNDeviceSwitch-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-GBNDeviceSwitch-MIB::aggTable'

A table that contains information about every
Aggregator that is associated with this System.

aggEntry row .1.3.6.1.4.1.27514.1.2.2.1.3.1.1

A list of the Aggregator parameters. This is indexed
by the ifIndex of the Aggregator.

Indexes

aggUnit aggPort

Column Syntax OID

aggUnitobsolete

The Interface Unit of the Aggregation.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.2.2.1.3.1.1.1

aggPortobsolete

The MasterPort of the Aggregation.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.2.2.1.3.1.1.2

aggPortListPortsobsolete

The complete set of ports currently associated with
this Aggregator. Each bit set in this list represents
an Actor Port member of this Link Aggregation.

Q-BRIDGE-MIBPortListr/w

.1.3.6.1.4.1.27514.1.2.2.1.3.1.1.3

aggRuleobsolete

The Rule to be applied to this Link Aggregator's Trunk Group
Table. The rules are based on the following selections SrcMAC (1),
means that the last three bits of the Source MAC Address are used to
index the Trunk Group …

Enumerationr/w

Enumerated Values:

1	srcMAC
2	destMAC
3	srcXORDestMAC
4	srcIP
5	destIP
6	srcXORDestIP

.1.3.6.1.4.1.27514.1.2.2.1.3.1.1.4

aggRowstatusobsolete

rowstatus of trunk.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.2.2.1.3.1.1.5

l3Table

table

.1.3.6.1.4.1.27514.1.2.2.1.4.1 · 1 row entry · 6 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk l3Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-GBNDeviceSwitch-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-GBNDeviceSwitch-MIB::l3Table'

?˱?Ϊ????оƬ??L3???????ݡ?

l3Entry row .1.3.6.1.4.1.27514.1.2.2.1.4.1.1

????оƬ??L3????˱?Ϊֻ????

Indexes

l3IpAddress

Column	Syntax	OID
l3IpAddress Ŀ??IP??ַ????Ϊ??????	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.27514.1.2.2.1.4.1.1.1`
l3NextHopMacAddress ??һ??IP??MAC??ַ??	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.2.2.1.4.1.1.2`
l3Vlan ??һ??IP???ڵ?VLAN??	Q-BRIDGE-MIBVlanIndex	`.1.3.6.1.4.1.27514.1.2.2.1.4.1.1.3`
l3Port ???ĵĳ??˿ڡ?	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.2.2.1.4.1.1.4`
l3CreateTime Create Time,such as 2004-07-29,13:30:15.0	SNMPv2-TCDateAndTime Type Constraints: `range: 8` `range: 11` Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	`.1.3.6.1.4.1.27514.1.2.2.1.4.1.1.5`
l3UpdateTime Update Time,such as 2004-07-29,13:30:15.0	SNMPv2-TCDateAndTime Type Constraints: `range: 8` `range: 11` Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	`.1.3.6.1.4.1.27514.1.2.2.1.4.1.1.6`

portFlowAlarmTable

table

.1.3.6.1.4.1.27514.1.2.2.1.7.1 · 1 row entry · 5 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk portFlowAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-GBNDeviceSwitch-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-GBNDeviceSwitch-MIB::portFlowAlarmTable'

A Table of port flow alarm.

portFlowAlarmEntry row .1.3.6.1.4.1.27514.1.2.2.1.7.1.1

A list of port flow alarm.

Indexes

portFlowAlarmPort

Column Syntax OID

portFlowAlarmPort

The port number.

Integer32

Constraints:
range: 1-26

.1.3.6.1.4.1.27514.1.2.2.1.7.1.1.1

portFlowAlarmEnable

The enable status of the port flow alarm

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.2.2.1.7.1.1.2

portFlowAlarmExceedStatus

The exceed status of the port flow alarm

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.2.2.1.7.1.1.3

portFlowAlarmExceedThreshold

The exceed threshold of port flow alarm.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.2.2.1.7.1.1.4

portFlowAlarmNormalThreshold

The normal threshold of port flow alarm.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.2.2.1.7.1.1.5

qosLineRateTable

table

.1.3.6.1.4.1.27514.1.2.2.1.9.1 · 1 row entry · 2 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk qosLineRateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-GBNDeviceSwitch-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-GBNDeviceSwitch-MIB::qosLineRateTable'

A list of line-rate QOS entries.

qosLineRateEntry row .1.3.6.1.4.1.27514.1.2.2.1.9.1.1

A list of line-rate QOS entries.

Indexes

qosLineRateInterface

Column	Syntax	OID
qosLineRateInterface the line rate interface.	Integer32 Constraints: `range: 1-26`	`.1.3.6.1.4.1.27514.1.2.2.1.9.1.1.1`
qosLineRateTargetRate the target rate of the line-rate QOS.	Integer32r/w Constraints: `range: 1-100`	`.1.3.6.1.4.1.27514.1.2.2.1.9.1.1.2`

stormControlTable

table

.1.3.6.1.4.1.27514.1.2.2.1.11.1 · 1 row entry · 4 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk stormControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-GBNDeviceSwitch-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-GBNDeviceSwitch-MIB::stormControlTable'

A list of storm control entries.

stormControlEntry row .1.3.6.1.4.1.27514.1.2.2.1.11.1.1

A list of storm control entries.

Indexes

stormControlInterface stormControlType

Column Syntax OID

stormControlInterface

the storm control interface.

Integer32

Constraints:
range: 1-26

.1.3.6.1.4.1.27514.1.2.2.1.11.1.1.1

stormControlType

the pack flow type of the storm control.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.2.2.1.11.1.1.2

stormControlTargetRate

the target rate of the storm control.

Integer32r/w

Constraints:
range: 1-1000

.1.3.6.1.4.1.27514.1.2.2.1.11.1.1.3

stormControlRowStatus

row status of the storm control

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.27514.1.2.2.1.11.1.1.4

bandwidthcontrolTable

table

.1.3.6.1.4.1.27514.1.2.2.1.13.1 · 1 row entry · 3 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk bandwidthcontrolTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-GBNDeviceSwitch-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-GBNDeviceSwitch-MIB::bandwidthcontrolTable'

A table of switch interfaces and associated properties.

bandwidthcontrolEntry row .1.3.6.1.4.1.27514.1.2.2.1.13.1.1

Table entry for switch interface control and status information.

Indexes

controlPort

Column	Syntax	OID
controlPort the index of port.	Integer32 Constraints: `range: 1-26`	`.1.3.6.1.4.1.27514.1.2.2.1.13.1.1.1`
portEgressBandwidthcontrol Egress Speed Value of port, bandwidth control .	Integer32r/w Constraints: `range: 0-1024000`	`.1.3.6.1.4.1.27514.1.2.2.1.13.1.1.2`
portIngressBandwidthcontrol Ingress Speed Value of port, bandwidth control .	Integer32r/w Constraints: `range: 0-1024000`	`.1.3.6.1.4.1.27514.1.2.2.1.13.1.1.3`

QTECH-GBNDeviceSwitch-MIB Table View

portTypeTable

aggTable

l3Table

portFlowAlarmTable

qosLineRateTable

stormControlTable

bandwidthcontrolTable