QTECH-CAPWAP-MOBILITY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
58

qtechMobilityEntryTable

table
.1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechMobilityEntryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-CAPWAP-MOBILITY-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-CAPWAP-MOBILITY-MIB::qtechMobilityEntryTable' 
Creat the roam mobility group
qtechMobilityEntry row .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1.1
The entry of roam mobility group table
Indexes
Column Syntax OID
qtechRoamGroupId
The group id of roam mobility group
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1.1.1
qtechRoamGroupName
The group name of roam mobility group
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1.1.2
qtechRoamGroupMyAddress
The group local ipv4 address of roam mobility group
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1.1.3
qtechRoamGroupMcEnable
The flag whether the roam mobility group mc is enable
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1.1.4
qtechRoamGroupMcAddress
The multicast addr of roam mobility group
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1.1.5
qtechRoamGroupKeepaliveCount
The keepalive count of roam mobility group
Integer32r/w
Constraints:
range: 2-30
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1.1.6
qtechRoamGroupKeepaliveInterval
The keepalive interval in seconds of roam mobility group
Integer32r/w
Constraints:
range: 1-30
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1.1.7
qtechRoamGroupIsFast
The flag whether the roam mobility group run in fast roaming mode
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1.1.8
qtechRoamGroupCreateStatus
This object indicate the creat or delete of the Mobility table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1.1.9
qtechRoamGroupMyAddressIPv6
The group local ipv6 address of roam mobility group
IPV6-TCIpv6Address
Type Constraints:
range: 16
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.1.1.10

qtechMobilityMemberEntryTable

table
.1.3.6.1.4.1.27514.1.1.10.2.64.1.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechMobilityMemberEntryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-CAPWAP-MOBILITY-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-CAPWAP-MOBILITY-MIB::qtechMobilityMemberEntryTable' 
Creat the roam mobility group member
qtechMobilityMemberEntry row .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.2.1
The entry of roam mobility member
Indexes
Column Syntax OID
qtechRoamMemberGroupId
The group id of roam mobility group
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.2.1.1
qtechRoamMemberPeerAddress
The peer ipv4 address of roam mobility group member
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.2.1.2
qtechRoamMemberIsList
The flag whether roam mobility group member in roam list
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.2.1.3
qtechRoamMemberDataChannelIsOK
The flag whether the data channel of roam mobility group member is ok
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.2.1.4
qtechRoamMemberDataChannelFailTimes
The Fail times of the data channel of roam mobility group member
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.2.1.5
qtechRoamMemberDTLSIsClient
The flag whether the roam mobility group member is client
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.2.1.6
qtechRoamMemberDTLSIsOK
The flag whether the roam mobility group member dtls is ok
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.2.1.7
qtechRoamMemberCreateStatus
This object indicate the creat or delete of the Mobility table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.2.1.8

qtechAPCtrlCreatEntryTable

table
.1.3.6.1.4.1.27514.1.1.10.2.64.1.1.3 · 1 row entry · 9 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechAPCtrlCreatEntryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-CAPWAP-MOBILITY-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-CAPWAP-MOBILITY-MIB::qtechAPCtrlCreatEntryTable' 
Creat the AP control block
qtechAPCtrlCreatEntry row .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.3.1
The entry of the AP control block
Indexes
Column Syntax OID
qtechAPName
The name of the AP control block
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.3.1.1
qtechPriority
The priority of AP control block
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.3.1.2
qtechPrimaryACIP
The primary AC IP of AP control block
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.3.1.3
qtechPrimaryACName
The primary AC Name of AP control block
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.3.1.4
qtechSecondaryACIP
The secondary AC IP of AP control block
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.3.1.5
qtechSecondaryACName
The secondary AC Name of AP control block
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.3.1.6
qtechTertiaryACIP
The tertiary AC IP of AP control block
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.3.1.7
qtechTertiaryACName
The tertiary AC Name of AP control block
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.3.1.8
qtechAPCtrlCreatStatus
The flag of the AP control table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.3.1.9

qtechWLANCtrlCreatEntryTable

table
.1.3.6.1.4.1.27514.1.1.10.2.64.1.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechWLANCtrlCreatEntryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-CAPWAP-MOBILITY-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-CAPWAP-MOBILITY-MIB::qtechWLANCtrlCreatEntryTable' 
Creat the WLAN control block
qtechWLANCtrlCreatEntry row .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.4.1
The entry of the WLAN group control block
Indexes
Column Syntax OID
qtechWLANID
The name of the wlan
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.4.1.1
qtechAnchorACIPaddr
The anchor ac ip address of wlan
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.4.1.2
qtechWLANCtrlCreatStatus
the object indicate creat or delete of the WLAN control table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.4.1.3
qtechAnchorACIPaddrIPv6
The anchor ac ipv6 address of wlan
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.4.1.4

qtechMobilityIPv6MemberEntryTable

table
.1.3.6.1.4.1.27514.1.1.10.2.64.1.1.37 · 1 row entry · 8 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechMobilityIPv6MemberEntryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-CAPWAP-MOBILITY-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-CAPWAP-MOBILITY-MIB::qtechMobilityIPv6MemberEntryTable' 
Creat the roam mobility group member
qtechMobilityIPv6MemberEntry row .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.37.1
The entry of roam mobility member
Indexes
Column Syntax OID
qtechRoamIPv6MemberGroupId
The group id of roam mobility group
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.37.1.1
qtechRoamIPv6MemberPeerAddress
The peer ipv4 address of roam mobility group member
IPV6-TCIpv6Address
Type Constraints:
range: 16
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.37.1.2
qtechRoamIPv6MemberIsList
The flag whether roam mobility group member in roam list
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.37.1.3
qtechRoamIPv6MemberDataChannelIsOK
The flag whether the data channel of roam mobility group member is ok
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.37.1.4
qtechRoamIPv6MemberDataChannelFailTimes
The Fail times of the data channel of roam mobility group member
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.37.1.5
qtechRoamIPv6MemberDTLSIsClient
The flag whether the roam mobility group member is client
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.37.1.6
qtechRoamIPv6MemberDTLSIsOK
The flag whether the roam mobility group member dtls is ok
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.37.1.7
qtechRoamIPv6MemberCreateStatus
This object indicate the creat or delete of the Mobility table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.37.1.8

qtechMobilityUserEntryTable

table
.1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38 · 1 row entry · 10 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechMobilityUserEntryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-CAPWAP-MOBILITY-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-CAPWAP-MOBILITY-MIB::qtechMobilityUserEntryTable' 
Show the mobility user
qtechMobilityUserEntry row .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38.1
The entry of mobility user
Indexes
Column Syntax OID
qtechRoamUserMac
The STA MAC of mobility user entry
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38.1.1
qtechRoamUserRoamType
The Roam Type of mobility user entry
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38.1.2
qtechRoamUserRoamOutAcAddressType
The RO-AC Address Type of mobility user entry
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38.1.3
qtechRoamUserRoamOutAcAddress
The RO-AC Address of mobility user entry
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38.1.4
qtechRoamUserRoamInAcAddressType
The RI-AC Address Type of mobility user entry
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38.1.5
qtechRoamUserRoamInAcAddress
The RI-AC Address of mobility user entry
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38.1.6
qtechRoamUserRoamOutApMac
The RO-AP MAC of mobility user entry
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38.1.7
qtechRoamUserRoamInApMac
The RI-AP MAC of mobility user entry
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38.1.8
qtechRoamUserRoamOutVid
The RO-VLAN of mobility user entry
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38.1.9
qtechRoamUserRoamInVid
The RI-VLAN of mobility user entry
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.38.1.10

qtechMobilityTrackEntryTable

table
.1.3.6.1.4.1.27514.1.1.10.2.64.1.1.39 · 1 row entry · 9 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechMobilityTrackEntryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-CAPWAP-MOBILITY-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-CAPWAP-MOBILITY-MIB::qtechMobilityTrackEntryTable' 
Show the roam track of user
qtechMobilityTrackEntry row .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.39.1
The entry of roam mobility track
Indexes
Column Syntax OID
qtechRoamTrackStaMac
The STA MAC of roam mobility track entry
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.39.1.1
qtechRoamTrackId
The TrackId of roam mobility track entry
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.39.1.2
qtechRoamTrackAcAddressType
The AC Address Type of roam mobility track entry
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.39.1.3
qtechRoamTrackAcAddress
The AC Address Type of roam mobility track entry
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.39.1.4
qtechRoamTrackApMac
The AP Mac of roam mobility track entry
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.39.1.5
qtechRoamTrackRadioId
The RadioId of roam mobility track entry
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.39.1.6
qtechRoamTrackStaIp
The STA IPv4 Address of roam mobility track entry
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.39.1.7
qtechRoamTrackStaIpv6
The STA IPv6 Address of roam mobility track entry
IPV6-TCIpv6Address
Type Constraints:
range: 16
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.39.1.8
qtechRoamTrackStaOnlineTime
The STA online time of roam mobility track entry
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.64.1.1.39.1.9