Standard view Table view

QTECH-BFD-MIB

        This module defines qtech BFD mibs.
Source file
QTECH-BFD-MIB
Last revised
Identity
qtechBfdMIB
Base OID
1.3.6.1.4.1.27514.1.1.10.2.48
Imported Objects
IF-MIB InterfaceIndexOrZero
INET-ADDRESS-MIB InetAddress InetAddressType InetPortNumber
QTECH-SMI qtechMgmt
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue
Net-SNMP examples using the qtech MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'QTECH-BFD-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'QTECH-BFD-MIB::qtechBfdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-BFD-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-BFD-MIB::qtechBfdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (78)
qtechBfdMIB
.1.3.6.1.4.1.27514.1.1.10.2.48
qtechBfdNotifications
IDS-MIBrsIDSFilterGroupName
 .1.3.6.1.4.1.27514.1.1.10.2.48.0
qtechBfdObjects
.1.3.6.1.4.1.27514.1.1.10.2.48.1
qtechBfdScalarObjects
.1.3.6.1.4.1.27514.1.1.10.2.48.1.1
qtechBfdAdminStatus r/w
Enumeration
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.1.1
qtechBfdSessNotificationsEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.1.2
qtechBfdSessTable
.1.3.6.1.4.1.27514.1.1.10.2.48.1.2
qtechBfdSessEntry
qtechBfdSessIndex
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1
qtechBfdSessIndex
QtechBfdSessIndexTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.1
qtechBfdSessState
QtechBfdSessStateTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.10
qtechBfdSessRemoteHeardFlag
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.11
qtechBfdSessDiag
QtechBfdDiagTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.12
qtechBfdSessOperMode r/w
QtechBfdSessOperModeTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.13
qtechBfdSessDemandModeDesiredFlag r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.14
qtechBfdSessControlPlaneIndepFlag r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.15
qtechBfdSessMultipointFlag r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.16
qtechBfdSessInterface r/w
IF-MIBInterfaceIndexOrZero
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.17
qtechBfdSessSrcAddrType r/w
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.18
qtechBfdSessSrcAddr r/w
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.19
qtechBfdSessVersionNumber r/w
Unsigned32IDS-MIBrsIDSAttackIndex
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.2
qtechBfdSessDstAddrType r/w
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.20
qtechBfdSessDstAddr r/w
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.21
qtechBfdSessGTSM r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.22
qtechBfdSessGTSMTTL r/w
Unsigned32IDS-MIBrsIDSSLTFilterGroupName
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.23
qtechBfdSessDesiredMinTxInterval r/w
QtechBfdIntervalTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.24
qtechBfdSessReqMinRxInterval r/w
QtechBfdIntervalTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.25
qtechBfdSessReqMinEchoRxInterval r/w
QtechBfdIntervalTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.26
qtechBfdSessDetectMult r/w
QtechBfdMultiplierTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.27
qtechBfdSessNegotiatedInterval
QtechBfdIntervalTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.28
qtechBfdSessNegotiatedEchoInterval
QtechBfdIntervalTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.29
qtechBfdSessType r/w
QtechBfdSessTypeTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.3
qtechBfdSessNegotiatedDetectMult
QtechBfdMultiplierTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.30
qtechBfdSessAuthPresFlag r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.31
qtechBfdSessAuthenticationType r/w
QtechBfdSessAuthenticationTypeTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.32
qtechBfdSessAuthenticationKeyID r/w
Integer32
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.33
qtechBfdSessAuthenticationKey r/w
QtechBfdSessionAuthenticationKeyTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.34
qtechBfdSessStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.35
qtechBfdSessRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.36
qtechBfdSessDiscriminator
Unsigned32
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.4
qtechBfdSessRemoteDiscr
Unsigned32
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.5
qtechBfdSessDestinationUdpPort r/w
QtechBfdCtrlDestPortNumberTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.6
qtechBfdSessSourceUdpPort r/w
QtechBfdCtrlSourcePortNumberTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.7
qtechBfdSessEchoSourceUdpPort r/w
INET-ADDRESS-MIBInetPortNumber
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.8
qtechBfdSessAdminStatus r/w
Enumeration
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.9
qtechBfdSessPerfTable
.1.3.6.1.4.1.27514.1.1.10.2.48.1.3
qtechBfdSessPerfEntry
IDS-MIBrsIDSSLTACTFilterGroupName
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1
qtechBfdSessPerfCtrlPktIn
SNMPv2-SMICounter32
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.1
qtechBfdSessPerfLastSessDownTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.10
qtechBfdSessPerfLastCommLostDiag
QtechBfdDiagTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.11
qtechBfdSessPerfSessUpCount
SNMPv2-SMICounter32
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.12
qtechBfdSessPerfDiscTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.13
qtechBfdSessPerfCtrlPktInHC
SNMPv2-SMICounter64
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.14
qtechBfdSessPerfCtrlPktOutHC
SNMPv2-SMICounter64IDS-MIBrsIDSSLTNCPFObjectIDIDS-MIBrsIDSSLTNCPFRuleName
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.15
qtechBfdSessPerfCtrlPktDropHC
SNMPv2-SMICounter64
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.16
qtechBfdSessPerfEchoPktInHC
SNMPv2-SMICounter64
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.17
qtechBfdSessPerfEchoPktOutHC
SNMPv2-SMICounter64
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.18
qtechBfdSessPerfEchoPktDropHC
SNMPv2-SMICounter64
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.19
qtechBfdSessPerfCtrlPktOut
SNMPv2-SMICounter32
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.2
qtechBfdSessPerfCtrlPktDrop
SNMPv2-SMICounter32
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.3
qtechBfdSessPerfCtrlPktDropLastTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.4
qtechBfdSessPerfEchoPktIn
SNMPv2-SMICounter32
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.5
qtechBfdSessPerfEchoPktOut
SNMPv2-SMICounter32
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.6
qtechBfdSessPerfEchoPktDrop
SNMPv2-SMICounter32
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.7
qtechBfdSessPerfEchoPktDropLastTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.8
qtechBfdSessUpTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.9
qtechBfdSessDiscMapTable
.1.3.6.1.4.1.27514.1.1.10.2.48.1.4
qtechBfdSessDiscMapEntry
qtechBfdSessDiscriminator
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.4.1
qtechBfdSessDiscMapIndex
QtechBfdSessIndexTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.4.1.1
qtechBfdSessDiscMapStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.4.1.2
qtechBfdSessDiscMapRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.4.1.3
qtechBfdSessIpMapTable
.1.3.6.1.4.1.27514.1.1.10.2.48.1.5
qtechBfdSessIpMapEntry
qtechBfdSessInterfaceqtechBfdSessSrcAddrTypeqtechBfdSessSrcAddrqtechBfdSessDstAddrTypeqtechBfdSessDstAddr
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.5.1
qtechBfdSessIpMapIndex
QtechBfdSessIndexTC
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.5.1.1
qtechBfdSessIpMapStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.5.1.2
qtechBfdSessIpMapRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.27514.1.1.10.2.48.1.5.1.3
qtechBfdConformance
.1.3.6.1.4.1.27514.1.1.10.2.48.2
qtechBfdGroups
.1.3.6.1.4.1.27514.1.1.10.2.48.2.1
qtechBfdCompliances
.1.3.6.1.4.1.27514.1.1.10.2.48.2.2
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. INET-ADDRESS-MIBrfc
  8. QTECH-SMIqtech
  9. QTECH-BFD-MIBqtechselected
Type Definitions (11)
QtechBfdCtrlDestPortNumberTC
Unsigned32 range: 0..65535
QtechBfdCtrlSourcePortNumberTC
Unsigned32 range: 0..65535
QtechBfdDiagTC
Enumeration
noDiagnostic(0)
controlDetectionTimeExpired(1)
echoFunctionFailed(2)
neighborSignaledSessionDown(3)
forwardingPlaneReset(4)
pathDown(5)
concatenatedPathDown(6)
administrativelyDown(7)
reverseConcatenatedPathDown(8)
QtechBfdIntervalTC
Unsigned32 range: 0..4294967295
QtechBfdMultiplierTC
Unsigned32 range: 1..255
QtechBfdSessAuthenticationTypeTC
Enumeration
noAuthentication(-1)
reserved(0)
simplePassword(1)
keyedMD5(2)
meticulousKeyedMD5(3)
keyedSHA1(4)
meticulousKeyedSHA1(5)
QtechBfdSessIndexTC
Unsigned32 range: 1..4294967295
QtechBfdSessOperModeTC
Enumeration
asyncModeWEchoFunction(1)
asynchModeWOEchoFunction(2)
demandModeWEchoFunction(3)
demandModeWOEchoFunction(4)
QtechBfdSessStateTC
Enumeration
adminDown(1)
down(2)
init(3)
up(4)
failing(5)
QtechBfdSessTypeTC
Enumeration
singleHop(1)
multiHopTotallyArbitraryPaths(2)
multiHopOutOfBandSignaling(3)
multiHopUnidirectionalLinks(4)
multiPointHead(5)
multiPointTail(6)
QtechBfdSessionAuthenticationKeyTC
OctetString range: 0..252
Conformance Groups (5)
qtechBfdSessionGroup
qtechBfdAdminStatus qtechBfdSessNotificationsEnable qtechBfdSessVersionNumber qtechBfdSessType qtechBfdSessDestinationUdpPort qtechBfdSessSourceUdpPort qtechBfdSessEchoSourceUdpPort qtechBfdSessAdminStatus qtechBfdSessOperMode qtechBfdSessDemandModeDesiredFlag qtechBfdSessControlPlaneIndepFlag qtechBfdSessMultipointFlag qtechBfdSessInterface qtechBfdSessSrcAddrType qtechBfdSessSrcAddr qtechBfdSessDstAddrType qtechBfdSessDstAddr qtechBfdSessGTSM qtechBfdSessGTSMTTL qtechBfdSessDesiredMinTxInterval qtechBfdSessReqMinRxInterval qtechBfdSessReqMinEchoRxInterval qtechBfdSessDetectMult qtechBfdSessAuthPresFlag qtechBfdSessAuthenticationType qtechBfdSessAuthenticationKeyID qtechBfdSessAuthenticationKey qtechBfdSessStorageType qtechBfdSessRowStatus qtechBfdSessDiscMapStorageType qtechBfdSessDiscMapRowStatus qtechBfdSessIpMapStorageType qtechBfdSessIpMapRowStatus
Collection of objects needed for BFD sessions.
 .1.3.6.1.4.1.27514.1.1.10.2.48.2.1.1
qtechBfdSessionReadOnlyGroup
qtechBfdSessDiscriminator qtechBfdSessRemoteDiscr qtechBfdSessState qtechBfdSessRemoteHeardFlag qtechBfdSessDiag qtechBfdSessNegotiatedInterval qtechBfdSessNegotiatedEchoInterval qtechBfdSessNegotiatedDetectMult qtechBfdSessDiscMapIndex qtechBfdSessIpMapIndex
Collection of read-only objects needed for BFD sessions.
 .1.3.6.1.4.1.27514.1.1.10.2.48.2.1.2
qtechBfdSessionPerfGroup
qtechBfdSessPerfCtrlPktIn qtechBfdSessPerfCtrlPktOut qtechBfdSessPerfCtrlPktDrop qtechBfdSessPerfCtrlPktDropLastTime qtechBfdSessPerfEchoPktIn qtechBfdSessPerfEchoPktOut qtechBfdSessPerfEchoPktDrop qtechBfdSessPerfEchoPktDropLastTime qtechBfdSessUpTime qtechBfdSessPerfLastSessDownTime qtechBfdSessPerfLastCommLostDiag qtechBfdSessPerfSessUpCount qtechBfdSessPerfDiscTime
Collection of objects needed to monitor the
performance of BFD sessions.
 .1.3.6.1.4.1.27514.1.1.10.2.48.2.1.3
qtechBfdSessionPerfHCGroup
qtechBfdSessPerfCtrlPktInHC qtechBfdSessPerfCtrlPktOutHC qtechBfdSessPerfCtrlPktDropHC qtechBfdSessPerfEchoPktInHC qtechBfdSessPerfEchoPktOutHC qtechBfdSessPerfEchoPktDropHC
Collection of objects needed to monitor the
performance of BFD sessions for which the
values of qtechBfdSessPerfPktIn, qtechBfdSessPerfPktOut
wrap around too quickly.
 .1.3.6.1.4.1.27514.1.1.10.2.48.2.1.4
qtechBfdNotificationGroup
qtechBfdSessUp qtechBfdSessDown
Set of notifications implemented in this
module.
 .1.3.6.1.4.1.27514.1.1.10.2.48.2.1.5
Compliance Statements (2)

OID .1.3.6.1.4.1.27514.1.1.10.2.48.2.2.1
Compliance statement for agents that provide full
support for the BFD-MIB module. Such devices can
then be monitored and also be configured using
this MIB module.
Required groups
mandatory qtechBfdSessionGroup
mandatory qtechBfdSessionReadOnlyGroup
mandatory qtechBfdSessionPerfGroup
mandatory qtechBfdNotificationGroup
optional qtechBfdSessionPerfHCGroup This group is mandatory for all systems that
are able to support the Counter64 date type.
Object refinements
ObjectAccessSyntaxDescription
qtechBfdSessSrcAddrType
INET-ADDRESS-MIBInetAddressType
 Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4)
support are required.
qtechBfdSessSrcAddr
INET-ADDRESS-MIBInetAddress
 An implementation is only required to support
unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes.
qtechBfdSessDstAddrType
INET-ADDRESS-MIBInetAddressType
 Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4)
support are required.
qtechBfdSessDstAddr
INET-ADDRESS-MIBInetAddress
 An implementation is only required to support
unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes.
qtechBfdSessRowStatus
SNMPv2-TCRowStatus
 Support for createAndWait and notReady is not
required.
qtechBfdSessDiscMapRowStatus
SNMPv2-TCRowStatus
 Support for createAndWait and notReady is not
required.
qtechBfdSessIpMapRowStatus
SNMPv2-TCRowStatus
 Support for createAndWait and notReady is not
required.

OID .1.3.6.1.4.1.27514.1.1.10.2.48.2.2.2
Compliance requirement for implementations that only
provide read-only support for BFD-MIB. Such devices
can then be monitored but cannot be configured using
this MIB module.
Required groups
mandatory qtechBfdSessionGroup
mandatory qtechBfdSessionReadOnlyGroup
mandatory qtechBfdSessionPerfGroup
mandatory qtechBfdNotificationGroup
optional qtechBfdSessionPerfHCGroup This group is mandatory for all systems that
are able to support the Counter64 date type.
Object refinements
ObjectAccessSyntaxDescription
qtechBfdSessVersionNumber readonly
Write access is not required.
qtechBfdSessType readonly
Write access is not required.
qtechBfdSessDestinationUdpPort readonly
Write access is not required.
qtechBfdSessSourceUdpPort readonly
Write access is not required.
qtechBfdSessEchoSourceUdpPort readonly
Write access is not required.
qtechBfdSessAdminStatus readonly
Write access is not required.
qtechBfdSessOperMode readonly
Write access is not required.
qtechBfdSessDemandModeDesiredFlag readonly
Write access is not required.
qtechBfdSessControlPlaneIndepFlag readonly
Write access is not required.
qtechBfdSessMultipointFlag readonly
Write access is not required.
qtechBfdSessInterface readonly
Write access is not required.
qtechBfdSessSrcAddrType readonly
INET-ADDRESS-MIBInetAddressType
 Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4)
support are required.
qtechBfdSessSrcAddr readonly
INET-ADDRESS-MIBInetAddress
 An implementation is only required to support
unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes.
qtechBfdSessDstAddrType readonly
INET-ADDRESS-MIBInetAddressType
 Only unknown(0), ipv4(1), ipv6(2) and ipv6z(4)
support are required.
qtechBfdSessDstAddr readonly
INET-ADDRESS-MIBInetAddress
 An implementation is only required to support
unknown(0), ipv4(1), ipv6(2) and ipv6z(4) sizes.
qtechBfdSessGTSM readonly
Write access is not required.
qtechBfdSessGTSMTTL readonly
Write access is not required.
qtechBfdSessDesiredMinTxInterval readonly
Write access is not required.
qtechBfdSessReqMinRxInterval readonly
Write access is not required.
qtechBfdSessReqMinEchoRxInterval readonly
Write access is not required.
qtechBfdSessDetectMult readonly
Write access is not required.
qtechBfdSessAuthPresFlag readonly
Write access is not required.
qtechBfdSessAuthenticationType readonly
Write access is not required.
qtechBfdSessAuthenticationKeyID readonly
Write access is not required.
qtechBfdSessAuthenticationKey readonly
Write access is not required.
qtechBfdSessStorageType readonly
Write access is not required.
qtechBfdSessRowStatus readonly
SNMPv2-TCRowStatus
 Write access is not required.
qtechBfdSessDiscMapStorageType readonly
Write access is not required.
qtechBfdSessDiscMapRowStatus readonly
SNMPv2-TCRowStatus
 Write access is not required.
qtechBfdSessIpMapStorageType readonly
Write access is not required.
qtechBfdSessIpMapRowStatus readonly
SNMPv2-TCRowStatus
 Write access is not required.
Notifications / Traps (2)
NameOIDDescription
qtechBfdSessUp
qtechBfdSessDiag qtechBfdSessDiag
.1.3.6.1.4.1.27514.1.1.10.2.48.0.1
This notification is generated when the
qtechBfdSessState object for one or more contiguous
entries in qtechBfdSessTable are about to enter the up(4)
state from some other state. The included values of
qtechBfdSessDiag MUST both be set equal to this
new state (i.e: up(4)). The two instances of
qtechBfdSessDiag in this notification indicate the range
of indexes that are affected. Note that all the indexes
of the two ends of the range can be derived from the
instance identifiers of these two objects. For the
cases where a contiguous range of sessions
have transitioned into the up(4) state at roughly
the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single qtechBfdSessEntry, then
the instance identifier (and values) of the two
qtechBfdSessDiag objects MUST be the identical.
qtechBfdSessDown
qtechBfdSessDiag qtechBfdSessDiag
.1.3.6.1.4.1.27514.1.1.10.2.48.0.2
This notification is generated when the
qtechBfdSessState object for one or more contiguous
entries in qtechBfdSessTable are about to enter the down(2)
or adminDown(1) states from some other state. The included
values of qtechBfdSessDiag MUST both be set equal to this new
state (i.e: down(2) or adminDown(1)). The two instances
of qtechBfdSessDiag in this notification indicate the range
of indexes that are affected. Note that all the indexes
of the two ends of the range can be derived from the
instance identifiers of these two objects. For
cases where a contiguous range of sessions
have transitioned into the down(2) or adminDown(1) states
at roughly the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single qtechBfdSessEntry, then
the instance identifier (and values) of the two
qtechBfdSessDiag objects MUST be the identical.