QOS-POLICY-802-PIB Table View

Maps each DSCP to an QosIeee802Cos.  When configured 
for the first time, all 64 entries of the table must 
be specified. Thereafter, instances may be modified but 
not deleted unless all instances are deleted.

qos802DscpMappingEntry row .1.3.6.1.4.1.45.4.3.1.1.1.1

An instance of the qos802DscpMapping class. A total of 64
class instances are constantly maintained after initial device
configuration.

Indexes

qos802DscpMappingId

Column	Syntax	OID
qos802DscpMappingId A unique ID for this policy rule instance.	POLICY-FRAMEWORK-PIBPolicyInstanceId Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.3.1.1.1.1.1
qos802DscpMappingDscp The DSCP class instance attribute that is used to determine the appropriate Layer 2 CoS mappings. DSCP values 0 through 63 (inclusive) are maintained in the table.	QOS-POLICY-IP-PIBDscpr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.45.4.3.1.1.1.1.2
qos802DscpMapping802Cos The IEEE 802 CoS value to use when mapping the DSCP value specified by the qos802DscpMappingDscp attribute to a IEEE 802 CoS.	QosIeee802Cosr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.45.4.3.1.1.1.1.3
qos802DscpMappingStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if th…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.3.1.1.1.1.4
qos802DscpMappingStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.3.1.1.1.1.5

Maps each of eight Layer 2 CoS values to a DSCP.  When 
configured for the first time, all 8 entries of the table
must be specified. Thereafter, instances may be modified 
but not deleted unless all instances are deleted.

qos802CosToDscpEntry row .1.3.6.1.4.1.45.4.3.1.1.2.1

An instance of the qosCosToDscp class. A total of 8
class instances are constantly maintained after initial
device configuration.

Indexes

qos802CosToDscpId

Column	Syntax	OID
qos802CosToDscpId A unique ID for this policy rule instance.	POLICY-FRAMEWORK-PIBPolicyInstanceId Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.3.1.1.2.1.1
qos802CosToDscpCos The Layer 2 CoS class instance attribute that is used to determine the appropriate DSCP mappings. CoS values 0 through 7 (inclusive) are maintained in the table.	QosIeee802Cosr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.45.4.3.1.1.2.1.2
qos802CosToDscpDscp The DSCP value to use when mapping the Layer 2 CoS value specified by the qosCosToDscp attribute to a DSCP.	QOS-POLICY-IP-PIBDscpr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.45.4.3.1.1.2.1.3
qos802CosToDscpStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if th…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.3.1.1.2.1.4
qos802CosToDscpStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.3.1.1.2.1.5

IEEE 802-based ACE definitions. A class that contains 
attributes of IEEE 802 (e.g., 802.3) traffic that form 
an association that is used to perform traffic 
classification.

qos802AceEntry row .1.3.6.1.4.1.45.4.3.1.2.1.1

IEEE 802-based ACE definitions. An entry specifies
(potentially) several distinct matching components. Each
component is tested against the data in a frame
individually. An overall match occurs when all of the
indi…

Indexes

qos802AceId

Column	Syntax	OID
qos802AceId An arbitrary integer index that uniquely identifies this 802 ACE among all of the 802 ACEs. Note that this identifier is used in instances of the qos802Acl class to associate a 802 ACE with a 802 ACL. An active ACE/A…	POLICY-FRAMEWORK-PIBPolicyInstanceId Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.3.1.2.1.1.1
qos802AceDstAddr The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical address specified by this object, taking into account address wildcarding as specified by t…	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.45.4.3.1.2.1.1.2
qos802AceDstAddrMask This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against the address specified in the qos802AceDstAddr object. The value of this ob…	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.45.4.3.1.2.1.1.3
qos802AceSrcAddr The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches the physical address specified by this object, taking into account address wildcarding as…	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.45.4.3.1.2.1.1.4
qos802AceSrcAddrMask This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in the qos802AceSrcAddr object. The value of th…	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.45.4.3.1.2.1.1.5
qos802AceVlanId The VLAN ID (VID) that uniquely identifies a VLAN within the device. This VLAN may be known or unknown (i.e., traffic associated with this VID has not yet been seen by the device) at the time this entry is instantiated.…	Integer32r/w Constraints: range: -1--1 range: 1-4094	.1.3.6.1.4.1.45.4.3.1.2.1.1.6
qos802AceVlanTagRequired This object indicates whether the presence of an IEEE 802.1Q VLAN tag in data link layer frames must be considered when determining if a given frame matches this 802 ACE entry. A value of 'taggedOnly(1)'…	Enumerationr/w Enumerated Values: 1 taggedOnly 2 priorityTagged 3 untaggedOnly 4 ignoreTag	.1.3.6.1.4.1.45.4.3.1.2.1.1.7
qos802AceEtherType This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include 'IP' (0x0800), 'ARP' (0x0806) and 'IPX' (0x8137). …	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.45.4.3.1.2.1.1.8
qos802AceUserPriority The set of values, representing the potential range of user priority values, against which the value contained in the user priority field of a tagged 802.1 frame is compared. A test for equality is performed when determ…	Bitsr/w Enumerated Values: 0 matchPriority0 1 matchPriority1 2 matchPriority2 3 matchPriority3 4 matchPriority4 5 matchPriority5 6 matchPriority6 7 matchPriority7	.1.3.6.1.4.1.45.4.3.1.2.1.1.9
qos802AcePermit If the frame matches this ACE and the value of this attribute is true, then the matching process terminates and the QoS associated with this 802-based ACE (indirectly through the 802 ACL) is applied to the packet. If …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.3.1.2.1.1.10
qos802AceStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if th…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.3.1.2.1.1.11
qos802AceStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.3.1.2.1.1.12

IEEE 802-based ACL definitions. A class that defines a 
set of 802 ACLs, each of which is comprised of an ordered 
list of 802 ACEs.

qos802AclDefinitionEntry row .1.3.6.1.4.1.45.4.3.1.2.2.1

IEEE 802-based ACL definitions. An entry specifies an
instance of this class that associates an 802 ACE with
a given 802 ACL. The evaluation order of distinct 802
ACEs that are associated with a specific 802 ACL is
…

Indexes

qos802AclDefinitionId

Column	Syntax	OID
qos802AclDefinitionId An arbitrary integer index that uniquely identifies this 802 ACE / 802 ACL association.	POLICY-FRAMEWORK-PIBPolicyInstanceId Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.3.1.2.2.1.1
qos802AclDefinitionAclId An index for this 802 ACL. Each 802 ACL in the device is assigned a unique integer index. There will (potentially) be multiple instances of the qos802AclDefinition class with this identifier, one for each 802 ACE that…	POLICY-FRAMEWORK-PIBPolicyInstanceIdr/w Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.3.1.2.2.1.2
qos802AclDefinitionAceId This attribute identifies the 802 ACE in the qos802AceTable that is associated with the 802 ACL specified by qos802AclDefinitionAclId object. The corresponding instance in the qos802Ace class must exist prior to bein…	POLICY-FRAMEWORK-PIBPolicyInstanceIdr/w Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.3.1.2.2.1.3
qos802AclDefinitionAceOrder The precedence of the 802 ACE, identified via the qos802AclDefinitionAceId object, with regard to evaluation order. The precedence determines the order of evaluation of this ACE in relation to related 802 ACEs that a…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.3.1.2.2.1.4
qos802AclDefinitionStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if th…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.3.1.2.2.1.5
qos802AclDefinitionStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.3.1.2.2.1.6
qos802AclDefinitionLabel A label used to reference the filter group in a textual manner. All members of the same group, as determined by the value of the qos802AclDefinitionAclId attribute, must have the same label.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.3.1.2.2.1.7