PowerConnect3248-MIB Table View

Table of descriptive and status information about
switches in this system.

switchInfoEntry row .1.3.6.1.4.1.674.10895.3.1.1.3.1

An entry in the table, containing information
about a single switch in this system.

Indexes

swUnitIndex

Column	Syntax	OID
swUnitIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.1.3.1.1
swHardwareVer Hardware version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.674.10895.3.1.1.3.1.2
swMicrocodeVer Microcode version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.674.10895.3.1.1.3.1.3
swLoaderVer Loader version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.674.10895.3.1.1.3.1.4
swBootRomVer Boot ROM code version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.674.10895.3.1.1.3.1.5
swOpCodeVer Operation code version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.674.10895.3.1.1.3.1.6
swPortNumber The total port number of this switch (including expansion slot).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.1.3.1.7
swPowerStatus Indicates the switch using internalPower(1), redundantPower(2) or both(3)	Enumeration Enumerated Values: 1 internalPower 2 redundantPower 3 internalAndRedundantPower	.1.3.6.1.4.1.674.10895.3.1.1.3.1.8
swRoleInSystem Indicates the switch is master(1), backupMaster(2) or slave(3) in this system.	Enumeration Enumerated Values: 1 master 2 backupMaster 3 slave	.1.3.6.1.4.1.674.10895.3.1.1.3.1.9
swSerialNumber Serial number of the switch.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.674.10895.3.1.1.3.1.10
swExpansionSlot1 Type of expansion module in this switch slot 1.	Enumeration Enumerated Values: 1 notPresent 2 other 3 hundredBaseFxScMmf 4 hundredBaseFxScSmf 5 hundredBaseFxMtrjMmf 6 thousandBaseSxScMmf 7 thousandBaseSxMtrjMmf 8 thousandBaseXGbic 9 thousandBaseLxScSmf 10 thousandBaseT 11 stackingModule 12 thousandBaseSfp	.1.3.6.1.4.1.674.10895.3.1.1.3.1.11
swExpansionSlot2 Type of expansion module in this switch slot 2.	Enumeration Enumerated Values: 1 notPresent 2 other 3 hundredBaseFxScMmf 4 hundredBaseFxScSmf 5 hundredBaseFxMtrjMmf 6 thousandBaseSxScMmf 7 thousandBaseSxMtrjMmf 8 thousandBaseXGbic 9 thousandBaseLxScSmf 10 thousandBaseT 11 stackingModule 12 thousandBaseSfp	.1.3.6.1.4.1.674.10895.3.1.1.3.1.12
swServiceTag Service tag serial-number of the switch.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.674.10895.3.1.1.3.1.13

Table about statuses of individual powers.

switchIndivPowerEntry row .1.3.6.1.4.1.674.10895.3.1.1.6.1

Table about statuses of individual powers.

Indexes

swIndivPowerUnitIndex swIndivPowerIndex

Column	Syntax	OID
swIndivPowerUnitIndex This is defined as swUnitIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.1.6.1.1
swIndivPowerIndex 1 means internal power. 2 means external power.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.674.10895.3.1.1.6.1.2
swIndivPowerStatus notPresent(1) means not present. green(2) means up. red(3) means down.	Enumeration Enumerated Values: 1 notPresent 2 green 3 red	.1.3.6.1.4.1.674.10895.3.1.1.6.1.3

Table of descriptive and status information about
configuration of each switch port (including expansion slot)
in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel).

portEntry row .1.3.6.1.4.1.674.10895.3.1.2.1.1

An entry in the table, containing information
about configuration in one switch port of the switch.

Indexes

portIndex

Column	Syntax	OID
portIndex This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.2.1.1.1
portName Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later).	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.674.10895.3.1.2.1.1.2
portType Indicates the port type.	Enumeration Enumerated Values: 1 other 2 hundredBaseTX 3 hundredBaseFX 4 thousandBaseSX 5 thousandBaseLX 6 thousandBaseT 7 thousandBaseGBIC 8 thousandBaseSfp	.1.3.6.1.4.1.674.10895.3.1.2.1.1.3
portSpeedDpxCfg Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100…	Enumerationr/w Enumerated Values: 1 reserved 2 halfDuplex10 3 fullDuplex10 4 halfDuplex100 5 fullDuplex100 6 halfDuplex1000 7 fullDuplex1000	.1.3.6.1.4.1.674.10895.3.1.2.1.1.4
portFlowCtrlCfg (1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 backPressure 4 dot3xFlowControl	.1.3.6.1.4.1.674.10895.3.1.2.1.1.5
portCapabilities Port capabilities.	Bitsr/w Enumerated Values: 0 portCap10half 1 portCap10full 2 portCap100half 3 portCap100full 4 portCap1000half 5 portCap1000full 6 reserved6 7 reserved7 8 reserved8 9 reserved9 10 reserved10 11 reserved11 12 reserved12 13 reserved13 14 portCapSym 15 portCapFlowCtrl	.1.3.6.1.4.1.674.10895.3.1.2.1.1.6
portAutonegotiation Whether autonegotiation is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.674.10895.3.1.2.1.1.7
portSpeedDpxStatus The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this …	Enumeration Enumerated Values: 1 error 2 halfDuplex10 3 fullDuplex10 4 halfDuplex100 5 fullDuplex100 6 halfDuplex1000 7 fullDuplex1000	.1.3.6.1.4.1.674.10895.3.1.2.1.1.8
portFlowCtrlStatus (2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, thi…	Enumeration Enumerated Values: 1 error 2 backPressure 3 dot3xFlowControl 4 none	.1.3.6.1.4.1.674.10895.3.1.2.1.1.9
portTrunkIndex The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to trunk at trunkIndex, defined by the corresponding trunkPort…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.2.1.1.10

Table of descriptive and status information about
configuration of each trunk,
similar to Cisco EtherChannel.

trunkEntry row .1.3.6.1.4.1.674.10895.3.1.3.3.1

An entry in the table, containing information
about configuration in one trunk of the switch.

Indexes

trunkIndex

Column	Syntax	OID
trunkIndex This object identifies the trunk within the switch for which this entry contains information.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.3.3.1.1
trunkPorts The complete set of ports currently associated with this trunk.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.674.10895.3.1.3.3.1.2
trunkCreation A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk.	Enumeration Enumerated Values: 1 static 2 lacp	.1.3.6.1.4.1.674.10895.3.1.3.3.1.3
trunkStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.674.10895.3.1.3.3.1.4

Table for LACP port configuration.

lacpPortEntry row .1.3.6.1.4.1.674.10895.3.1.4.1.1

Entry for LACP port configuration.

Indexes

lacpPortIndex

Column	Syntax	OID
lacpPortIndex This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.4.1.1.1
lacpPortStatus Whether 802.3ad LACP is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.674.10895.3.1.4.1.1.2

The table manages port settings for Spanning Tree 
Protocol 802.1d, 802.1w or 802.1s depending on the 
value specified by staProtocolType.

staPortEntry row .1.3.6.1.4.1.674.10895.3.1.5.2.1

The conceptual entry of staPortTable.

Indexes

staPortIndex

Column	Syntax	OID
staPortIndex The port and the trunk (excluding trunk member ports) interface of the staPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1dStpPort i…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.5.2.1.1
staPortFastForward Whether fast forwarding is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.674.10895.3.1.5.2.1.2
staPortProtocolMigration When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.3.1.5.2.1.3
staPortAdminEdgePort The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.3.1.5.2.1.4
staPortOperEdgePort The operational value of the Edge Port parameter. The object is initialized to the value of staPortAdminEdgePort and is set FALSE when a BPDU is received.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.3.1.5.2.1.5
staPortAdminPointToPoint The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of f…	Enumerationr/w Enumerated Values: 0 forceTrue 1 forceFalse 2 auto	.1.3.6.1.4.1.674.10895.3.1.5.2.1.6
staPortOperPointToPoint The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-det…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.3.1.5.2.1.7
staPortLongPathCost The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in 32 b…	Integer32r/w Constraints: range: 1-200000000	.1.3.6.1.4.1.674.10895.3.1.5.2.1.8

This table is used to configure the property of a specific 
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0.

xstInstanceCfgEntry row .1.3.6.1.4.1.674.10895.3.1.5.6.4.1

A conceptual row containing the property of the MST or RST instance.

Indexes

xstInstanceCfgIndex

Column	Syntax	OID
xstInstanceCfgIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.1
xstInstanceCfgPriority The priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096.	Integer32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.2
xstInstanceCfgTimeSinceTopologyChange The time (in hundredths of second) since the last topology change detected by the bridge entity in MST or RST.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.3
xstInstanceCfgTopChanges The total number of topology changes detected by this bridge in MST or RST since the management entity was last reset or initialized.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.4
xstInstanceCfgDesignatedRoot The bridge identifier of the root of the spanning tree as determined by the Multiple Spanning Tree Protocol (1s) or Rapid Spanning Tree Protocol (1w) executed by this node. This value is used as the Root Identifier pa…	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.5
xstInstanceCfgRootCost The cost of the path to the root as seen from this bridge of the MST or RST.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.6
xstInstanceCfgRootPort The number of the port which offers the lowest cost path from this bridge to the root bridge of the MST or RST.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.7
xstInstanceCfgMaxAge The maximum age of Multiple Spanning Tree Protocol (1s) or Rapid Spanning Tree Protocol (1w) information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the ac…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.8
xstInstanceCfgHelloTime The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the specific spanning tree or trying to become so, in units of hundredths of a second. This is the…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.9
xstInstanceCfgHoldTime This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.10
xstInstanceCfgForwardDelay For MST or RST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the p…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.11
xstInstanceCfgBridgeMaxAge For MST or RST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the …	BRIDGE-MIBTimeout	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.12
xstInstanceCfgBridgeHelloTime For MST or RST protocol,the time (in hundredths of second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1990 to be 1 second.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.13
xstInstanceCfgBridgeForwardDelay For MST or RST protocol, the time (in hundredths of second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.14
xstInstanceCfgTxHoldCount For MST or RST protocol, the value used by the Port Transmit state machine to limit the maximum transmission rate.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.15
xstInstanceCfgPathCostMethod For MST or RST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch. When the value o…	Enumeration Enumerated Values: 1 short 2 long	.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.16

The extension table for dot1dStpPortEntry to provide 
additional Spanning Tree information and configuration.

xstInstancePortEntry row .1.3.6.1.4.1.674.10895.3.1.5.6.5.1

The conceptual row for xstInstancePortTable.

Indexes

xstInstancePortInstance xstInstancePortPort

Column	Syntax	OID
xstInstancePortInstance The instance of the MSTP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.1
xstInstancePortPort The port and the trunk (excluding trunk member ports) interface of the mstInstancePortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1dS…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.2
xstInstancePortPriority Defines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest priority (i.e., lowest value) will be configured as an active li…	Integer32r/w Constraints: range: 0-240	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.3
xstInstancePortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame: discarding(1) Port receives configuration messages, …	Enumeration Enumerated Values: 1 discarding 2 learning 3 forwarding	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.4
xstInstancePortEnable The enabled/disabled status of the port.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.5
xstInstancePortPathCost The pathcost of the MST or RST in the range 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher va…	Integer32r/w Constraints: range: 1-200000000	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.6
xstInstancePortDesignatedRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.7
xstInstancePortDesignatedCost The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.8
xstInstancePortDesignatedBridge The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.9
xstInstancePortDesignatedPort The Port Identifier of the port on the Designated Bridge for this port's segment.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.10
xstInstancePortForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.11
xstInstancePortPortRole The role of the port in the MST or RST protocol: (1) The port has no role within the spanning tree (2) The port is part of the active topology connecting the bridge to the root bridge (i.e., root port) (3) The port …	Enumeration Enumerated Values: 1 disabled 2 root 3 designated 4 alternate 5 backup 6 master	.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.12

Table of descriptive and status information about
switches in this system.

mirrorEntry row .1.3.6.1.4.1.674.10895.3.1.8.1.1

An entry in the table, containing information
about a single switch in this system.

Indexes

mirrorDestinationPort mirrorSourcePort

Column	Syntax	OID
mirrorDestinationPort Destination port for mirrored packets. This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.8.1.1.1
mirrorSourcePort Source port for mirrored packets. This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.8.1.1.2
mirrorType If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and transmit packets.	Enumerationr/w Enumerated Values: 1 rx 2 tx 3 both	.1.3.6.1.4.1.674.10895.3.1.8.1.1.3
mirrorStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.674.10895.3.1.8.1.1.4

Table for current router ports.

igmpSnoopRouterCurrentEntry row .1.3.6.1.4.1.674.10895.3.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.3.1.9.8.1.1
igmpSnoopRouterCurrentPorts The set of ports which are current router ports. Within this list, some router ports are static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.674.10895.3.1.9.8.1.2
igmpSnoopRouterCurrentStatus The set of ports which are static router ports.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.674.10895.3.1.9.8.1.3

Table for static router ports.

igmpSnoopRouterStaticEntry row .1.3.6.1.4.1.674.10895.3.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column	Syntax	OID
igmpSnoopRouterStaticVlanIndex This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.3.1.9.9.1.1
igmpSnoopRouterStaticPorts The set of ports which are static router ports.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.674.10895.3.1.9.9.1.2
igmpSnoopRouterStaticStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.674.10895.3.1.9.9.1.3

Table for current multicast addresses.

igmpSnoopMulticastCurrentEntry row .1.3.6.1.4.1.674.10895.3.1.9.10.1

Entry for current multicast addresses.

Indexes

igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress

Column	Syntax	OID
igmpSnoopMulticastCurrentVlanIndex This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.3.1.9.10.1.1
igmpSnoopMulticastCurrentIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.3.1.9.10.1.2
igmpSnoopMulticastCurrentPorts The set of ports which are members.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.674.10895.3.1.9.10.1.3
igmpSnoopMulticastCurrentStatus The set of ports which are static members.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.674.10895.3.1.9.10.1.4

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry row .1.3.6.1.4.1.674.10895.3.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column	Syntax	OID
igmpSnoopMulticastStaticVlanIndex This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.3.1.9.11.1.1
igmpSnoopMulticastStaticIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.3.1.9.11.1.2
igmpSnoopMulticastStaticPorts The set of ports which are members.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.674.10895.3.1.9.11.1.3
igmpSnoopMulticastStaticStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.674.10895.3.1.9.11.1.4

A table of netConfigEntries.

netConfigEntry row .1.3.6.1.4.1.674.10895.3.1.10.1.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

netConfigIfIndex netConfigIPAddress netConfigSubnetMask

Column	Syntax	OID
netConfigIfIndex VLAN interface on which this entry is defined. This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.10.1.1.1
netConfigIPAddress The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure ou…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.3.1.10.1.1.2
netConfigSubnetMask The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure o…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.3.1.10.1.1.3
netConfigPrimaryInterface Whether this is a primary interface.	Enumerationr/w Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.674.10895.3.1.10.1.1.4
netConfigUnnumbered Whether this is an unnumbered interface.	Enumerationr/w Enumerated Values: 1 unnumbered 2 notUnnumbered	.1.3.6.1.4.1.674.10895.3.1.10.1.1.5
netConfigStatus The status of this netConfigEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.3.1.10.1.1.6

Table of descriptive and status information about
configuration of each switch ports(including expansion slot)
in this system.

bcastStormEntry row .1.3.6.1.4.1.674.10895.3.1.11.1.1

An entry in the table, containing information
about configuration in one switch port of the switch.

Indexes

bcastStormIfIndex

Column	Syntax	OID
bcastStormIfIndex This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.11.1.1.1
bcastStormStatus Whether broadcast storm protection is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.674.10895.3.1.11.1.1.2
bcastStormSampleType Sample type. If this is pkt-rate(1), then bcastStormPktRate is valid. If this is octet-rate(2), then bcastStormOctetRate is valid. If this is percent(3), then bcastStormPercent is valid.	Enumerationr/w Enumerated Values: 1 pkt-rate 2 octet-rate 3 percent	.1.3.6.1.4.1.674.10895.3.1.11.1.1.3
bcastStormPktRate Broadcast storm threshold as packets per second.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.11.1.1.4
bcastStormOctetRate Broadcast storm threshold as octets per second.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.11.1.1.5
bcastStormPercent Broadcast storm threshold as percentage of bandwidth.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.11.1.1.6

Table for VLAN configuration.

vlanEntry row .1.3.6.1.4.1.674.10895.3.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column	Syntax	OID
vlanIndex Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.3.1.12.1.1.1
vlanAddressMethod Method to get the IP address.	Enumerationr/w Enumerated Values: 1 user 2 bootp 3 dhcp	.1.3.6.1.4.1.674.10895.3.1.12.1.1.2

Table for port configuration in VLAN.

vlanPortEntry row .1.3.6.1.4.1.674.10895.3.1.12.2.1

Entry for port configuration in VLAN.

Indexes

vlanPortIndex

Column	Syntax	OID
vlanPortIndex This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.12.2.1.1
vlanPortMode This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) sets an access link.	Enumerationr/w Enumerated Values: 1 hybrid 2 dot1qTrunk 3 access	.1.3.6.1.4.1.674.10895.3.1.12.2.1.2

Table for IP precedence priority mapping.

prioIpPrecEntry row .1.3.6.1.4.1.674.10895.3.1.13.2.1

Entry for IP precendence priority mapping.

Indexes

prioIpPrecPort prioIpPrecValue

Column	Syntax	OID
prioIpPrecPort This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.13.2.1.2
prioIpPrecValue Precedence value for this entry.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.674.10895.3.1.13.2.1.3
prioIpPrecCos Class of service for this entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.674.10895.3.1.13.2.1.4

Table for IP DSCP priority mapping.

prioIpDscpEntry row .1.3.6.1.4.1.674.10895.3.1.13.4.1

Entry for IP DSCP priority mapping.

Indexes

prioIpDscpPort prioIpDscpValue

Column	Syntax	OID
prioIpDscpPort This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.13.4.1.1
prioIpDscpValue DSCP value for this entry.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.674.10895.3.1.13.4.1.2
prioIpDscpCos Class of service for this entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.674.10895.3.1.13.4.1.3

Table for IP port priority mapping.

prioIpPortEntry row .1.3.6.1.4.1.674.10895.3.1.13.7.1

Entry for IP port priority mapping.

Indexes

prioIpPortPhysPort prioIpPortValue

Column	Syntax	OID
prioIpPortPhysPort This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.13.7.1.1
prioIpPortValue IP port for this value.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.674.10895.3.1.13.7.1.2
prioIpPortCos Class of service for this entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.674.10895.3.1.13.7.1.3
prioIpPortStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.674.10895.3.1.13.7.1.4

Table for weighted round robin (WRR).

prioWrrEntry row .1.3.6.1.4.1.674.10895.3.1.13.9.1

Entry for weighted round robin (WRR).

Indexes

prioWrrTrafficClass

Column	Syntax	OID
prioWrrTrafficClass Traffic class for this entry, as defined in dot1dTrafficClass in the Q-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.674.10895.3.1.13.9.1.1
prioWrrWeight Weight for this entry.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.674.10895.3.1.13.9.1.2

A list of trap destination entries.

trapDestEntry row .1.3.6.1.4.1.674.10895.3.1.14.1.1

This entry includes a destination IP address to which to send
traps for this community.

Indexes

trapDestAddress

Column	Syntax	OID
trapDestAddress The address to send traps.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.3.1.14.1.1.1
trapDestCommunity A community to which this destination address belongs.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.674.10895.3.1.14.1.1.2
trapDestStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.674.10895.3.1.14.1.1.3
trapDestVersion This variables represent the version of the Trap we wish to send to trap Receiver, if the value is 1, mean we wish to send Version 1 trap, if the value is 2, mean we wish to send version 2 trap.	Enumerationr/w Enumerated Values: 1 version1 2 version2	.1.3.6.1.4.1.674.10895.3.1.14.1.1.4

The Port Security(MAC bindind) Table

portSecPortEntry row .1.3.6.1.4.1.674.10895.3.1.17.2.1.1

The entry of portSecPortTable

Indexes

portSecPortIndex

Column	Syntax	OID
portSecPortIndex The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.17.2.1.1.1
portSecPortStatus Set enabled(1) to enable port security and set disabled(2) to disable port security.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.674.10895.3.1.17.2.1.1.2
portSecAction The corresponding actions that will take place when a port is under intruded, when this variable is set to none(1), no action will perform, when this variable is set to trap(2), a swPortSecurityTrap trap will send, …	Enumerationr/w Enumerated Values: 1 none 2 trap 3 shutdown 4 trapAndShutdown	.1.3.6.1.4.1.674.10895.3.1.17.2.1.1.3

The table for Secure Shell Connection.

sshConnInfoEntry row .1.3.6.1.4.1.674.10895.3.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column	Syntax	OID
sshConnID The connection ID of the Secure Shell Connection.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.1
sshConnMajorVersion The SSH major version.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.2
sshConnMinorVersion The SSH minor version.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.3
sshConnEncryptionType The encryption type of the SSH. none(1) mean no encrytion , des(2) mean using DES encrytion, tribeDes mean using 3DES encrytion.	Enumeration Enumerated Values: 1 none 2 des 3 tribeDes	.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.4
sshConnStatus The SSH connection State. negotiationStart(1) mean the SSH is in its negotiation start state, authenticationStart(2) mean the SSH is in authentication start state, sessionStart(3) mean the SSH is in session start State.	Enumeration Enumerated Values: 1 negotiationStart 2 authenticationStart 3 sessionStart	.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.5
sshConnUserName The user name of the connection.	OctetString	.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.6
sshDisconnect Set the variables to disconnect to disconnect the connection, when read, this variables always return noDisconnect(1).	Enumerationr/w Enumerated Values: 1 noDisconnect 2 disconnect	.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.7

A Table for storing the remote log Server list.

remoteLogServerEntry row .1.3.6.1.4.1.674.10895.3.1.19.6.4.1

A conceptually row for remoteLogServerTable.

Indexes

remoteLogServerIp

Column	Syntax	OID
remoteLogServerIp The IP address of the remote log Server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.3.1.19.6.4.1.1
remoteLogServerStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.674.10895.3.1.19.6.4.1.2