PW-MPLS-STD-MIB

Monitored by Observium

        This MIB module complements the PW-STD-MIB module for PW
operation over MPLS.
        
Copyright (c) 2009 IETF Trust and the persons identified as
authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
        
- Redistributions of source code must retain the above
  copyright notice, this list of conditions and the
  following disclaimer.
        
- Redistributions in binary form must reproduce the above
  copyright notice, this list of conditions and the following
  disclaimer in the documentation and/or other materials
  provided with the distribution.
        
- Neither the name of Internet Society, IETF or IETF Trust,
  nor the names of specific contributors, may be used to
  endorse or promote products derived from this software
  without specific prior written permission.
        
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
        
DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
        
This version of this MIB module is part of RFC 5602;
see the RFC itself for full legal notices.

Observium actively monitors this MIB

Observium uses this MIB in discovery or polling workflows on applicable devices.

Pseudowires

Explore Observium network monitoring

Source file: PW-MPLS-STD-MIB
Last revised: 12 Jun 2009, 00:00 UTC
Identity: pwMplsStdMIB
Base OID: 1.3.6.1.2.1.181

Imported Objects

IF-MIB	InterfaceIndexOrZero
MPLS-LSR-STD-MIB	MplsIndexType
MPLS-TC-STD-MIB	MplsLdpIdentifier MplsLsrIdentifier MplsTunnelIndex MplsTunnelInstanceIndex
PW-STD-MIB	pwIndex
PW-TC-STD-MIB	PwIndexType
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC	StorageType

Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'PW-MPLS-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PW-MPLS-STD-MIB::pwMplsStdMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-MPLS-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-MPLS-STD-MIB::pwMplsStdMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (41)

2 directly used by Observium

pwMplsStdMIB		`.1.3.6.1.2.1.181`
pwMplsNotifications		`.1.3.6.1.2.1.181.0`
pwMplsObjects		`.1.3.6.1.2.1.181.1`
pwMplsTable		`.1.3.6.1.2.1.181.1.1`
pwMplsEntry	PW-STD-MIBpwIndex	`.1.3.6.1.2.1.181.1.1.1`
pwMplsMplsType r/w	Bits	`.1.3.6.1.2.1.181.1.1.1.1`
pwMplsExpBitsMode r/w	Enumeration	`.1.3.6.1.2.1.181.1.1.1.2`
pwMplsExpBits r/w	Unsigned32	`.1.3.6.1.2.1.181.1.1.1.3`
pwMplsTtl r/w	Unsigned32	`.1.3.6.1.2.1.181.1.1.1.4`
pwMplsLocalLdpID OBS ✓ r/w	MPLS-TC-STD-MIBMplsLdpIdentifier	`.1.3.6.1.2.1.181.1.1.1.5`
pwMplsLocalLdpEntityIndex r/w	Unsigned32	`.1.3.6.1.2.1.181.1.1.1.6`
pwMplsPeerLdpID OBS ✓	MPLS-TC-STD-MIBMplsLdpIdentifier	`.1.3.6.1.2.1.181.1.1.1.7`
pwMplsStorageType r/w	SNMPv2-TCStorageType	`.1.3.6.1.2.1.181.1.1.1.8`
pwMplsOutboundTable		`.1.3.6.1.2.1.181.1.2`
pwMplsOutboundEntry		`.1.3.6.1.2.1.181.1.2.1`
pwMplsOutboundLsrXcIndex r/w	MPLS-LSR-STD-MIBMplsIndexType	`.1.3.6.1.2.1.181.1.2.1.1`
pwMplsOutboundTunnelIndex r/w	MPLS-TC-STD-MIBMplsTunnelIndex	`.1.3.6.1.2.1.181.1.2.1.2`
pwMplsOutboundTunnelInstance	MPLS-TC-STD-MIBMplsTunnelInstanceIndex	`.1.3.6.1.2.1.181.1.2.1.3`
pwMplsOutboundTunnelLclLSR r/w	MPLS-TC-STD-MIBMplsLsrIdentifier	`.1.3.6.1.2.1.181.1.2.1.4`
pwMplsOutboundTunnelPeerLSR r/w	MPLS-TC-STD-MIBMplsLsrIdentifier	`.1.3.6.1.2.1.181.1.2.1.5`
pwMplsOutboundIfIndex r/w	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.2.1.181.1.2.1.6`
pwMplsOutboundTunnelTypeInUse	Enumeration	`.1.3.6.1.2.1.181.1.2.1.7`
pwMplsInboundTable		`.1.3.6.1.2.1.181.1.3`
pwMplsInboundEntry	PW-STD-MIBpwIndex	`.1.3.6.1.2.1.181.1.3.1`
pwMplsInboundXcIndex	MPLS-LSR-STD-MIBMplsIndexType	`.1.3.6.1.2.1.181.1.3.1.1`
pwMplsNonTeMappingTable		`.1.3.6.1.2.1.181.1.4`
pwMplsNonTeMappingEntry	pwMplsNonTeMappingDirectionpwMplsNonTeMappingXcIndexpwMplsNonTeMappingIfIndexpwMplsNonTeMappingPwIndex	`.1.3.6.1.2.1.181.1.4.1`
pwMplsNonTeMappingDirection	Enumeration	`.1.3.6.1.2.1.181.1.4.1.1`
pwMplsNonTeMappingXcIndex	MPLS-LSR-STD-MIBMplsIndexType	`.1.3.6.1.2.1.181.1.4.1.2`
pwMplsNonTeMappingIfIndex	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.2.1.181.1.4.1.3`
pwMplsNonTeMappingPwIndex	PW-TC-STD-MIBPwIndexType	`.1.3.6.1.2.1.181.1.4.1.4`
pwMplsTeMappingTable		`.1.3.6.1.2.1.181.1.5`
pwMplsTeMappingEntry	pwMplsTeMappingTunnelIndexpwMplsTeMappingTunnelInstancepwMplsTeMappingTunnelPeerLsrIDpwMplsTeMappingTunnelLocalLsrIDpwMplsTeMappingPwIndex	`.1.3.6.1.2.1.181.1.5.1`
pwMplsTeMappingTunnelIndex	MPLS-TC-STD-MIBMplsTunnelIndex	`.1.3.6.1.2.1.181.1.5.1.1`
pwMplsTeMappingTunnelInstance	MPLS-TC-STD-MIBMplsTunnelInstanceIndex	`.1.3.6.1.2.1.181.1.5.1.2`
pwMplsTeMappingTunnelPeerLsrID	MPLS-TC-STD-MIBMplsLsrIdentifier	`.1.3.6.1.2.1.181.1.5.1.3`
pwMplsTeMappingTunnelLocalLsrID	MPLS-TC-STD-MIBMplsLsrIdentifier	`.1.3.6.1.2.1.181.1.5.1.4`
pwMplsTeMappingPwIndex	PW-TC-STD-MIBPwIndexType	`.1.3.6.1.2.1.181.1.5.1.5`
pwMplsConformance		`.1.3.6.1.2.1.181.2`
pwMplsGroups		`.1.3.6.1.2.1.181.2.1`
pwMplsCompliances		`.1.3.6.1.2.1.181.2.2`

Dependencies (16) 8 direct · 8 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

PW-MPLS-STD-MIBrfcselected
- IF-MIBrfc1 symbol
  - IANAifType-MIBrfc1 symbol
    - SNMPv2-SMIrfc2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-CONFrfc3 symbols
    - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared7 symbols
    - SNMPv2-TCrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared8 symbols
- MPLS-LSR-STD-MIBrfc1 symbol
  - IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfcshared1 symbol
  - IF-MIBrfcshared3 symbols
  - INET-ADDRESS-MIBrfc2 symbols
    - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-TCrfcshared1 symbol
  - MPLS-TC-STD-MIBrfc5 symbols
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared6 symbols
- MPLS-TC-STD-MIBrfcshared4 symbols
- PW-STD-MIBrfc1 symbol
  - HC-PerfHist-TC-MIBrfc4 symbols
    - SNMPv2-SMIrfcshared5 symbols
    - SNMPv2-TCrfcshared1 symbol
  - IANA-PWE3-MIBrfc3 symbols
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfcshared1 symbol
  - IF-MIBrfcshared1 symbol
  - INET-ADDRESS-MIBrfcshared2 symbols
  - PerfHist-TC-MIBrfc2 symbols
    - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-TCrfcshared1 symbol
  - PW-TC-STD-MIBrfc11 symbols
    - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMP-FRAMEWORK-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared2 symbols
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared4 symbols
- PW-TC-STD-MIBrfcshared1 symbol
- SNMPv2-CONFrfcshared2 symbols
- SNMPv2-SMIrfcshared4 symbols
- SNMPv2-TCrfcshared1 symbol

Dependency-first compile order

Conformance Groups (5)

pwMplsGroup	pwMplsMplsType pwMplsExpBitsMode pwMplsExpBits pwMplsTtl pwMplsLocalLdpID pwMplsLocalLdpEntityIndex pwMplsPeerLdpID pwMplsStorageType Collection of objects needed for PW over MPLS PSN configuration.	`.1.3.6.1.2.1.181.2.1.1`
pwMplsOutboundMainGroup	pwMplsOutboundLsrXcIndex pwMplsOutboundIfIndex pwMplsOutboundTunnelTypeInUse Collection of objects needed for outbound association of PW and MPLS tunnel.	`.1.3.6.1.2.1.181.2.1.2`
pwMplsOutboundTeGroup	pwMplsOutboundTunnelIndex pwMplsOutboundTunnelInstance pwMplsOutboundTunnelLclLSR pwMplsOutboundTunnelPeerLSR Collection of objects needed for outbound association of PW and MPLS-TE tunnel.	`.1.3.6.1.2.1.181.2.1.3`
pwMplsInboundGroup	pwMplsInboundXcIndex Collection of objects needed for inbound PW presentation. This group MUST be supported if PW signaling through LDP is used.	`.1.3.6.1.2.1.181.2.1.4`
pwMplsMappingGroup	pwMplsNonTeMappingPwIndex pwMplsTeMappingPwIndex Collection of objects needed for mapping association of PW and MPLS tunnel.	`.1.3.6.1.2.1.181.2.1.5`

Compliance Statements (2)

OID .1.3.6.1.2.1.181.2.2.1

The compliance statement for agents that provide full
support for the PW-MPLS-STD-MIB module. Such devices
can then be monitored and also be configured using
this MIB module.

Required groups

mandatory	pwMplsGroup
mandatory	pwMplsOutboundMainGroup
mandatory	pwMplsInboundGroup
mandatory	pwMplsMappingGroup
optional	pwMplsOutboundTeGroup	This group MUST be supported if the implementation allows MPLS-TE tunnels to carry PW traffic.

Object refinements

Object	Access	Description
pwMplsMplsType		Support of pwOnly(2) is not required. At least one of mplsTe(0) or mplsNonTe(1) MUST be supported if signaling of PW is supported.
pwMplsExpBitsMode		Support of specifiedValue(2) and serviceDependant(3) is optional.
pwMplsLocalLdpID	readonly	A read-write access is required if the implementation supports more than one LDP entity identifier for PW signaling.
pwMplsLocalLdpEntityIndex	readonly	A read-write access is required if the implementation supports more than one LDP entity index for PW signaling.
pwMplsOutboundLsrXcIndex	readonly	A value other than zero MUST be supported if the implementation supports non-TE signaling of the outer tunnel. A read-write access MUST be supported if the implementation supports PW label manual setting and carrying them over non-TE tunnels.
pwMplsOutboundIfIndex	readonly	A value other than zero and read-write operations MUST be supported if the implementation supports manually configured PW without MPLS outer tunnel.

OID .1.3.6.1.2.1.181.2.2.2

The compliance statement for agents that provide read-
only support for the PW-MPLS-STD-MIB module. Such
devices can then be monitored but cannot be configured
using this MIB module.