PW-ATM-R-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
59

pwAtmOutboundTable

table
.1.3.6.1.4.1.164.20.16.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwAtmOutboundTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ATM-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ATM-R-MIB::pwAtmOutboundTable' 
This table specifies the information for an ATM PW to  
be carried over PSN in the outbound direction. An  
entry is created in this table for every entry in 
the pwTable with a pwType equal to one of the following:
atmAal5SduVcc(2), atmCell1to1Vcc(12), atmCell1to1Vpc(13) 
or atmAal5PduVcc(14).
pwAtmOutboundEntry row .1.3.6.1.4.1.164.20.16.1.1.1
A row in this table represents an ATM PW that needs to be
adapted and carried over PSN. This table is indexed by
pwIndex from pwTable. All objects in this table MUST NOT
be changed after row creation (see [PWMIB]) and…
Indexes
Column Syntax OID
pwAtmOutboundAtmIf
The ATM Interface that receives cells from the ATM
network.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.164.20.16.1.1.1.1
pwAtmOutboundVpi
VPI value of this ATM PW. The value may indicate the
translated value when egress generates new VPI.
ATM-TC-MIBAtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.164.20.16.1.1.1.2
pwAtmOutboundVci
VCI value of this ATM PW. The value may indicate the
translated value when egress generates new VCI.
ATM-TC-MIBAtmVcIdentifierr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.20.16.1.1.1.3
pwAtmOutboundTrafficParamDescr
This object represents a pointer to an ATM traffic parameter
specification table which will be employed while receiving
cells from the ATM network. This table should contain a
set of self-consistent ATM traffic param…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.164.20.16.1.1.1.4
pwAtmOutboundRowStatus
This Object is used to create, modify or delete a row in
this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.164.20.16.1.1.1.5

pwAtmInboundTable

table
.1.3.6.1.4.1.164.20.16.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwAtmInboundTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ATM-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ATM-R-MIB::pwAtmInboundTable' 
This table specifies the information for an ATM PW in the 
Inbound direction.
pwAtmInboundEntry row .1.3.6.1.4.1.164.20.16.1.3.1
A row in this table represents an ATM PW that needs to be
sent into the ATM Network after reconstructing cells from
Packets received from a PSN. This table is indexed by
pwIndex from pwTable. An entry is created i…
Indexes
Column Syntax OID
pwAtmInboundAtmIf
The ATM Interface that sends cells into the ATM network
after reconstructing cells from packets received from
a PSN.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.164.20.16.1.3.1.1
pwAtmInboundVpi
VPI value of this ATM PW.
If the pwType is atmNto1Transparent then the value will
be set to zero.
ATM-TC-MIBAtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.164.20.16.1.3.1.2
pwAtmInboundVci
VCI value of this ATM PW.
If the pwType is atmNto1Transparent atmCell1to1Vpc or
atmCellNto1Vpc then the value should be set to zero.
ATM-TC-MIBAtmVcIdentifierr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.20.16.1.3.1.3
pwAtmInboundTrafficParamDescr
This object represents a pointer to a ATM traffic parameter
specification table which will be employed while transmit
into the ATM network. This table contains a set of
self-consistent ATM traffic parameters includi…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.164.20.16.1.3.1.4
pwAtmInboundRowStatus
This Object is used to create, modify or delete a row in
this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.164.20.16.1.3.1.5

pwAtmCfgTable

table
.1.3.6.1.4.1.164.20.16.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwAtmCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ATM-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ATM-R-MIB::pwAtmCfgTable' 
This table specifies generic information for an ATM PW
to be carried over PSN in any mode.
pwAtmCfgEntry row .1.3.6.1.4.1.164.20.16.1.5.1
This table contains a set of parameters for
the ATM PW that needs to be adapted and carried
over PSN. This table is indexed by pwIndex from
pwTable. Unless otherwise specified, all
read-write objects in this table MA…
Indexes
Column Syntax OID
pwAtmCfgMaxCellConcatenation
The maximum number of ATM cells that can be
concatenated into one PW packet towards PSN.
In non LDP or other signaling protocol environment,
this object might be changed at anytime, but traffic
might be interuppted
Unsigned32r/w
Constraints:
range: 1-29
 .1.3.6.1.4.1.164.20.16.1.5.1.1
pwAtmCfgFarEndMaxCellConcatenation
The maximum number of ATM cells that can be
concatenated into one PW packet towards PSN as reported by
the far end. If no LDP in use, the object will return
value 0.
Unsigned32
Constraints:
range: 1-29
 .1.3.6.1.4.1.164.20.16.1.5.1.2
pwAtmCfgTimeoutMode
This objects determines whether a packet can be
transmitted to the PSN based on time out expiration
for collecting cells or not. The actual handling of the
time out is implementation specific-as such this object
may …
Enumerationr/w
Enumerated Values:
1notApplicable
2disabled
3enabled
 .1.3.6.1.4.1.164.20.16.1.5.1.3
pwAtmClpQosMapping
This Object indicates whether the CLP bits should be
considered when setting the value in the Quality
of Service fields of the encapsulating protocol
(e.g. EXP fields of the MPLS Label Stack). Selecting
True allows …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.164.20.16.1.5.1.4
pwAtmOamCellSupported
This Object indicates whether OAM Cells are transported
on this PW. In transparent cell transport,
the value of this object MUST be false(2)
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.164.20.16.1.5.1.5

pwAtmOutboundNto1Table

table
.1.3.6.1.4.1.164.20.16.1.6 · 1 row entry · 7 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwAtmOutboundNto1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ATM-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ATM-R-MIB::pwAtmOutboundNto1Table' 
This table specifies the information for an ATM PW to 
be carried over PSN in the outbound direction. Up to 
N entries can be created in this table for every  
entry in the pwTable with a pwType equal to: 
atmCellNto1Vcc(9), or atmCellNto1Vpc(10).
		An entry can be created only when the VP/VC are known.
A single entry will be created in this table for every  
entry in the pwTable with a pwType equal to 
one of the following: atmCell1to1Vcc(12), or
atmCell1to1Vpc(13), or atmAal5PduVcc(14), or
atmAal5SduVcc(2), or atmTransparent(3).
pwAtmOutboundNto1Entry row .1.3.6.1.4.1.164.20.16.1.6.1
A row in this table represents an ATM PW that needs to be
adapted and carried over PSN. This table is indexed by
pwIndex from pwTable and the ATM interface with VPL/ VCLs.
In atmTransparent(3), Vpi and VCi will be set …
Indexes
Column Syntax OID
pwAtmOutboundNto1AtmIf
The ATM Interface that receives cells from the ATM network.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.164.20.16.1.6.1.1
pwAtmOutboundNto1Vpi
VPI value of this ATM PW. In atmTransparent(3),
Vpi will be set to 0xFFFFFFFF
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.164.20.16.1.6.1.2
pwAtmOutboundNto1Vci
VCI value of this ATM PW. In atmTransparent(3), or
VP case, the value will be the equivalent of
0xFFFFFFFF
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.20.16.1.6.1.3
pwAtmOutboundNto1RowStatus
This Object is used to create, modify or delete a row in
this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.164.20.16.1.6.1.4
pwAtmOutboundNto1TrafficParamDescr
This object represents a pointer to a ATM traffic parameter
specification table which will be employed while receiving
cells from the ATM network. This table should contain a set
of self-consistent ATM traffic param…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.164.20.16.1.6.1.5
pwAtmOutboundNto1MappedVpi
The egress generated VPI value of this ATM PW. The
entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13). In other types, the value will be the
equivalent of 0…
ATM-TC-MIBAtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.164.20.16.1.6.1.6
pwAtmOutboundNto1MappedVci
The egress generated VCI value of this ATM PW. The
entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13. In VP case or other types, the
value will be the equ…
ATM-TC-MIBAtmVcIdentifierr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.20.16.1.6.1.7

pwAtmInboundNto1Table

table
.1.3.6.1.4.1.164.20.16.1.7 · 1 row entry · 7 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwAtmInboundNto1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ATM-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ATM-R-MIB::pwAtmInboundNto1Table' 
This table specifies the information for an ATM PW to 
be carried over PSN in the Inbound direction. Up to 
N entries can be created in this table for every  
entry in the pwTable with a pwType equal to: 
atmCellNto1Vcc(9), or atmCellNto1Vpc(10).
		An entry can be created only when the VP/VC are known.
A single entry will be created in this table for every  
entry in the pwTable with a pwType equal to 
one of the following:atmCell1to1Vcc(12), or
atmCell1to1Vpc(13), or atmAal5PduVcc(14), or
atmAal5SduVcc(2), or atmTransparent(3).
pwAtmInboundNto1Entry row .1.3.6.1.4.1.164.20.16.1.7.1
A row in this table represents an ATM PW that needs to be
adapted and carried over PSN. This table is indexed by
pwIndex from pwTable and the ATM interface with VPL/ VCLs.
In atmTransparent(3), Vpi and VCi will be set …
Indexes
Column Syntax OID
pwAtmInboundNto1AtmIf
The ATM Interface that receives cells from the ATM network.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.164.20.16.1.7.1.1
pwAtmInboundNto1Vpi
VPI value of this ATM PW. In atmTransparent(3),
Vpi will be set to 0xFFFFFFFF.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.164.20.16.1.7.1.2
pwAtmInboundNto1Vci
VCI value of this ATM PW. In atmTransparent(3), or
VP case, the value will be the equivalent of
0xFFFFFFFF
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.20.16.1.7.1.3
pwAtmInboundNto1RowStatus
This Object is used to create, modify or delete a row in
this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.164.20.16.1.7.1.4
pwAtmInboundNto1TrafficParamDescr
This object represents a pointer to a ATM traffic parameter
specification table which will be employed while receiving
cells from the ATM network. This table should contain a set
of self-consistent ATM traffic paramet…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.164.20.16.1.7.1.5
pwAtmInboundNto1MappedVpi
The generated VPI value of this ATM PW. The
entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13). In other types, the value will be the
equivalent of 0xFFFFFF…
ATM-TC-MIBAtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.164.20.16.1.7.1.6
pwAtmInboundNto1MappedVci
The generated VCI value of this ATM PW. The
entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13. In VP case or other types, the
value will be the equivalent…
ATM-TC-MIBAtmVcIdentifierr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.20.16.1.7.1.7

pwAtmPerfCurrentTable

table
.1.3.6.1.4.1.164.20.16.1.8 · 1 row entry · 8 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwAtmPerfCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ATM-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ATM-R-MIB::pwAtmPerfCurrentTable' 
The current 15 minute interval counts are in  
this table. 
This table provides performance information per ATM PW.
pwAtmPerfCurrentEntry row .1.3.6.1.4.1.164.20.16.1.8.1
An entry in this table is created by the agent for every
pwAtmCfgTable entry. After 15 minutes, the contents of this
table entry are copied to a new entry in the
pwAtmPerfInterval table and the counts in this entry …
Indexes
Column Syntax OID
pwAtmPerfCurrentMissingPkts
Number of missing packets (as detected via control word
sequence number gaps).
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.20.16.1.8.1.1
pwAtmPerfCurrentPktsReOrder
Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this Feature.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.20.16.1.8.1.2
pwAtmPerfCurrentPktsMisOrder
Number of packets detected out of order (via control word
sequence numbers).
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.20.16.1.8.1.3
pwAtmPerfCurrentPktsTimeout
Number of packets transmitted due to timeout expiration
while attempting to collect cells.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.20.16.1.8.1.4
pwAtmPerfCurrentCellsXmit
Number of transmitted cells.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.20.16.1.8.1.5
pwAtmPerfCurrentCellsDropped
Number of dropped cells.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.20.16.1.8.1.6
pwAtmPerfCurrentCellsReceived
Number of received cells.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.20.16.1.8.1.7
pwAtmPerfCurrentUnknownCells
Number of cells received from the PSN with unknown VPI or
VCI values. This object is relevant only in N:1 mode.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.20.16.1.8.1.8

pwAtmPerfIntervalTable

table
.1.3.6.1.4.1.164.20.16.1.9 · 1 row entry · 11 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwAtmPerfIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ATM-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ATM-R-MIB::pwAtmPerfIntervalTable' 
This table provides performance information per ATM PW 
similar to the pwAtmPerfCurrentTable above. However, 
these counts represent historical 15 minute intervals. 
Typically, this table will have a maximum of 96 entries 
for a 24 hour period.
pwAtmPerfIntervalEntry row .1.3.6.1.4.1.164.20.16.1.9.1
An entry in this table is created by the agent for
every pwAtmPerfCurrentEntry that is 15 minutes old.
The contents of the Current entry are copied to the new
entry here. The Current entry, then resets its counts
to…
Indexes
Column Syntax OID
pwAtmPerfIntervalNumber
A number (normally between 1 and 96 to cover a 24 hour
period) which identifies the interval for which the set
of statistics is available. The interval identified by 1
is the most recently completed 15 minute interva…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.9.1.1
pwAtmPerfIntervalValidData
This variable indicates if the data for this interval
is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.164.20.16.1.9.1.2
pwAtmPerfIntervalDuration
The duration of a particular interval in seconds,
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than, the
normal value. Therefore this actual interval value
is provided.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.9.1.3
pwAtmPerfIntervalMissingPkts
Number of missing packets (as detected via control
word sequence number gaps).
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.20.16.1.9.1.4
pwAtmPerfIntervalPktsReOrder
Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this
Feature.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.20.16.1.9.1.5
pwAtmPerfIntervalPktsMisOrder
Number of packets detected out of order (via control word
sequence numbers).
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.20.16.1.9.1.6
pwAtmPerfIntervalPktsTimeout
Number of packets transmitted due to timeout expiration.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.20.16.1.9.1.7
pwAtmPerfIntervalCellsXmit
Number of transmitted cells.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.20.16.1.9.1.8
pwAtmPerfIntervalCellsDropped
Number of dropped cells.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.20.16.1.9.1.9
pwAtmPerfIntervalCellsReceived
Number of received cells.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.20.16.1.9.1.10
pwAtmPerfIntervalUnknownCells
Number of cells received from the PSN with unknown VPI or
VCI values. This object is relevant only in N:1 mode.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.20.16.1.9.1.11

pwAtmPerf1DayIntervalTable

table
.1.3.6.1.4.1.164.20.16.1.10 · 1 row entry · 11 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwAtmPerf1DayIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ATM-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ATM-R-MIB::pwAtmPerf1DayIntervalTable' 
This table provides performance information per ATM PW 
similar to the pwAtmPerfIntervalTable above. However, 
these counters represent historical 1 day intervals up to
one full month.
pwAtmPerf1DayIntervalEntry row .1.3.6.1.4.1.164.20.16.1.10.1
An entry is created in this table by the agent
for every entry in the pwAtmCfgTable table.
Indexes
Column Syntax OID
pwAtmPerf1DayIntervalNumber
The number of interval, where 1 indicates current day
measured period and 2 and above indicate previous days
respectively
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.10.1.1
pwAtmPerf1DayIntervalValidData
This object indicates if the data for this interval
is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.164.20.16.1.10.1.2
pwAtmPerf1DayIntervalDuration
The duration of a particular interval in seconds,
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than, the
normal value. Therefore this actual interval value
is provided.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.10.1.3
pwAtmPerf1DayIntervalMissingPkts
Number of missing packets (as detected via control word
sequence number gaps).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.10.1.4
pwAtmPerf1DayIntervalPktsReOrder
Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this
feature.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.10.1.5
pwAtmPerf1DayIntervalPktsMisOrder
Number of packets detected out of order(via control word
sequence numbers), and could not be re-ordered.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.10.1.6
pwAtmPerf1DayIntervalPktsTimeout
Number of packets transmitted due to timeout expiration.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.10.1.7
pwAtmPerf1DayIntervalCellsXmit
Number of transmitted cells.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.10.1.8
pwAtmPerf1DayIntervalCellsDropped
Number of dropped cells.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.10.1.9
pwAtmPerf1DayIntervalCellsReceived
Number of received cells.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.10.1.10
pwAtmPerf1DayIntervalUnknownCells
Number of cells received from the PSN with unknown VPI
or VCI value. This object is relevant only in N:1 mode.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.20.16.1.10.1.11