PW-ATM-R-MIB
This MIB contains managed object definitions for
Pseudo Wire emulation of ATM over Packet Switched
Networks (PSN).
This MIB supplements the PW-STD-MIB module.
The PW-STD-MIB contains structures and MIB associations
generic to Pseudo-Wire (PW) emulation. PW-specific
MIBs (such as this) contain config and stats for specific
PW types.
Copyright (C) The IETF Trust (2007). This version of
this MIB module is part of RFC XXXX; see the RFC itself for
full legal notices.
-- RFC Ed.: replace XXXX with actual RFC number & remove this
note
- Source file
PW-ATM-R-MIB- Last revised
- Identity
pwAtmMIBR- Base OID
1.3.6.1.4.1.164.20.16
Imported Objects
| ATM-TC-MIB | AtmVcIdentifier AtmVpIdentifier |
| IF-MIB | InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount |
| PW-STD-R-MIB | pwIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) transmission Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus TruthValue |
Net-SNMP examples using the rad MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PW-ATM-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PW-ATM-R-MIB::pwAtmMIBR'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ATM-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ATM-R-MIB::pwAtmMIBR'
Objects (82)
Showing 82 of 82 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.164.20 |
||
.1.3.6.1.4.1.164.20.16 |
||
.1.3.6.1.4.1.164.20.16.0 |
||
.1.3.6.1.4.1.164.20.16.1 |
||
.1.3.6.1.4.1.164.20.16.1.1 |
||
.1.3.6.1.4.1.164.20.16.1.1.1 |
||
.1.3.6.1.4.1.164.20.16.1.1.1.1 |
||
|
|
.1.3.6.1.4.1.164.20.16.1.1.1.2 |
|
|
|
.1.3.6.1.4.1.164.20.16.1.1.1.3 |
|
.1.3.6.1.4.1.164.20.16.1.1.1.4 |
||
.1.3.6.1.4.1.164.20.16.1.1.1.5 |
||
.1.3.6.1.4.1.164.20.16.1.10 |
||
.1.3.6.1.4.1.164.20.16.1.10.1 |
||
.1.3.6.1.4.1.164.20.16.1.10.1.1 |
||
.1.3.6.1.4.1.164.20.16.1.10.1.10 |
||
.1.3.6.1.4.1.164.20.16.1.10.1.11 |
||
.1.3.6.1.4.1.164.20.16.1.10.1.2 |
||
.1.3.6.1.4.1.164.20.16.1.10.1.3 |
||
.1.3.6.1.4.1.164.20.16.1.10.1.4 |
||
.1.3.6.1.4.1.164.20.16.1.10.1.5 |
||
.1.3.6.1.4.1.164.20.16.1.10.1.6 |
||
.1.3.6.1.4.1.164.20.16.1.10.1.7 |
||
.1.3.6.1.4.1.164.20.16.1.10.1.8 |
||
.1.3.6.1.4.1.164.20.16.1.10.1.9 |
||
.1.3.6.1.4.1.164.20.16.1.3 |
||
.1.3.6.1.4.1.164.20.16.1.3.1 |
||
.1.3.6.1.4.1.164.20.16.1.3.1.1 |
||
|
|
.1.3.6.1.4.1.164.20.16.1.3.1.2 |
|
|
|
.1.3.6.1.4.1.164.20.16.1.3.1.3 |
|
.1.3.6.1.4.1.164.20.16.1.3.1.4 |
||
.1.3.6.1.4.1.164.20.16.1.3.1.5 |
||
.1.3.6.1.4.1.164.20.16.1.5 |
||
.1.3.6.1.4.1.164.20.16.1.5.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.164.20.16.1.5.1.1 |
|
|
Unsigned32
|
.1.3.6.1.4.1.164.20.16.1.5.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.164.20.16.1.5.1.3 |
|
.1.3.6.1.4.1.164.20.16.1.5.1.4 |
||
.1.3.6.1.4.1.164.20.16.1.5.1.5 |
||
.1.3.6.1.4.1.164.20.16.1.6 |
||
.1.3.6.1.4.1.164.20.16.1.6.1 |
||
.1.3.6.1.4.1.164.20.16.1.6.1.1 |
||
.1.3.6.1.4.1.164.20.16.1.6.1.2 |
||
.1.3.6.1.4.1.164.20.16.1.6.1.3 |
||
.1.3.6.1.4.1.164.20.16.1.6.1.4 |
||
.1.3.6.1.4.1.164.20.16.1.6.1.5 |
||
.1.3.6.1.4.1.164.20.16.1.6.1.6 |
||
.1.3.6.1.4.1.164.20.16.1.6.1.7 |
||
.1.3.6.1.4.1.164.20.16.1.7 |
||
.1.3.6.1.4.1.164.20.16.1.7.1 |
||
.1.3.6.1.4.1.164.20.16.1.7.1.1 |
||
.1.3.6.1.4.1.164.20.16.1.7.1.2 |
||
.1.3.6.1.4.1.164.20.16.1.7.1.3 |
||
.1.3.6.1.4.1.164.20.16.1.7.1.4 |
||
.1.3.6.1.4.1.164.20.16.1.7.1.5 |
||
.1.3.6.1.4.1.164.20.16.1.7.1.6 |
||
.1.3.6.1.4.1.164.20.16.1.7.1.7 |
||
.1.3.6.1.4.1.164.20.16.1.8 |
||
.1.3.6.1.4.1.164.20.16.1.8.1 |
||
.1.3.6.1.4.1.164.20.16.1.8.1.1 |
||
.1.3.6.1.4.1.164.20.16.1.8.1.2 |
||
.1.3.6.1.4.1.164.20.16.1.8.1.3 |
||
.1.3.6.1.4.1.164.20.16.1.8.1.4 |
||
.1.3.6.1.4.1.164.20.16.1.8.1.5 |
||
.1.3.6.1.4.1.164.20.16.1.8.1.6 |
||
.1.3.6.1.4.1.164.20.16.1.8.1.7 |
||
.1.3.6.1.4.1.164.20.16.1.8.1.8 |
||
.1.3.6.1.4.1.164.20.16.1.9 |
||
.1.3.6.1.4.1.164.20.16.1.9.1 |
||
.1.3.6.1.4.1.164.20.16.1.9.1.1 |
||
.1.3.6.1.4.1.164.20.16.1.9.1.10 |
||
.1.3.6.1.4.1.164.20.16.1.9.1.11 |
||
.1.3.6.1.4.1.164.20.16.1.9.1.2 |
||
.1.3.6.1.4.1.164.20.16.1.9.1.3 |
||
.1.3.6.1.4.1.164.20.16.1.9.1.4 |
||
.1.3.6.1.4.1.164.20.16.1.9.1.5 |
||
.1.3.6.1.4.1.164.20.16.1.9.1.6 |
||
.1.3.6.1.4.1.164.20.16.1.9.1.7 |
||
.1.3.6.1.4.1.164.20.16.1.9.1.8 |
||
.1.3.6.1.4.1.164.20.16.1.9.1.9 |
||
.1.3.6.1.4.1.164.20.16.2 |
||
.1.3.6.1.4.1.164.20.16.2.1 |
||
.1.3.6.1.4.1.164.20.16.2.2 |
Dependencies (14) 7 direct · 7 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- ATM-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- PerfHist-TC-MIBrfc
- HC-PerfHist-TC-MIBrfc
- IANA-PWE3-R-MIBrad
- INET-ADDRESS-MIBrfc
- PW-TC-STD-R-MIBrad
- SNMP-FRAMEWORK-MIBrfc
- PW-STD-R-MIBrad
- PW-ATM-R-MIBradselected
Conformance Groups (6)
Compliance Statements (1)
OID
.1.3.6.1.4.1.164.20.16.2.2.2The compliance statement for agent that support
ATM PW.
ATM PW.
Required groups
| mandatory | pwAtmCfgGroup | |
| mandatory | pwAtmPerfGroup | |
| optional | pwAtmOutbound1to1Group |
This group is mandatory only for implementations that support the ATM PW 1:1 mode and not using Nto1 table. |
| optional | pwAtmInbound1to1Group |
This group is mandatory only for implementations that support the ATM PW 1:1 mode and not using Nto1 table. |
| optional | pwAtmOutboundNto1Group |
This group is mandatory only for implementations that support the ATM PW N:1 and transparent mode. |
| optional | pwAtmInboundNto1Group |
This group is mandatory only for implementations that support the ATM PW N:1 and transparent mode. |